Blackberry Q10 not reconised by device manager
i plug in my blackberry to the pc open up blackberry link my blackberry does not show up. I go to device manager where it says the driver was not installed so i manually try to install the driver where it says no driver can be installed i then have to disbale the phone and reenable it 2 times before it finally installs the driver and this keeps happening.
i have a windows 7 64 bit computer fully up to date
anybody got any ideas about why this keeps happening and how to stop this?
Hey ben950,
Welcome to the BlackBerry Community Support Forums.
Thanks for the question.
When you enter Device Manager does the BlackBerry display with a yellow exclamation mark? Can you provide us with the full message as it appears on the computer when you try to update the driver? Please see the following article which could be causing this issue: BlackBerry Link fails to install from the built in installer on the device when UAC is enabled.
Let us know how you make out with this.
Thanks.
-TheSen
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!
Similar Messages
-
My dvd drive not recognized in device manager,getting the yellow explanation mark.
my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks
Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
G500 - Bluetooth not listed in device manager
Hi,
Bluetooth is not listed under device manager
it doesn't appear in pc settings/pc and devices neither does the bluetooth switch appears une aiplane mode
my model;
product: 20236
serial: xxxxx
thx
Moderator comment: Serial number(s) removed to protect member from mischief.Hi guys,
I see that Shiv_K is helping you out on this
In addition.
Try to refresh the Hardware and Power.
Remove AC and Battery
Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
Inside BIOS hit F9 then Enter for Yes to load defaults
Hit F10 to Save and Exit then Enter for YES.
now open
Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
Then install these
Lenovo Energy Management
Intel Wifi Driver
Press Fn+F5 and see if you will be provided with this window showing the bluetooth..
Spoiler (Highlight to read)
Hope this helps,
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
G470 Bluetooth not listed under Device Manager and not working
Hi,
Can someone teach me how to solve my G470 problem?
Its Bluetooth is not listed under Device Manager and I can't find it anywhere.
Before that, it isn't working at all.
Thanks
Solved!
Go to Solution.hi athirah11,
Welcome to the Lenovo Forums.
Can you try the following:
1. Press the Windows key +R, type devmgmt.msc and press Enter. On the Device Manager, click View > Show hidden devices and check if the Bluetooth device is being listed.
- Link to picture
- Link to picture
2. If the bluetooth device shows up under the Device Manager, do the following:
a. Under Control Panel > Programs, uninstall the Bluetooth driver/software (reboot if necessary)
b. Run the Bluetooth Driver Installer
- this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, the Bluetooth device and its components should now appear normally under the Device Manager.
If the bluetooth device still doesn't show up, can you provide the model number of your G470 (eg. 59xxxxxx) fur further checking.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Down Loaded latest itune update, will not reconise my devices to syn
Down loaded latest itune update on PC windows 8, will not reconise my devices to syn Ipad,Iphone, Ipod
Have the same issue but with iPod Nano 7 Gen. Happened Yesterday after Yosemite update to 10.10.2
-
Hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager
Problem: hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager
System Type
hp pavillion dv9502au notebook pc
Windows editon
Windows 7 Ultimate
System
Processor AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory 1.00 GB (895 MB usable)
System type 32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager)
5. I tried installing broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
8. Please Help
Windows 7 Ultimate
System
Processor AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory 1.00 GB (895 MB usable)
System type 32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager) (network adpaters shown are
NVIDIA geforce adapter, bluetooth adpaters)
5. I tried installing many broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
Please helpYour wireless adapter is defective.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
X200s WiFi network Card is not shown in Device Manager
Hello,
I have a X200s laptop. WinXp is installed on it.
The problem is that the WiFi network card is not listed in device manager under network cards. And the Wifi led is always off. Only bluetooth and Wireless wan leds are on.
Can anyone help me, I need to let the XP detevt the WIFI adapter.
Thank you.i have the same problem. Can you tell what to do
-
[solved] Digital Camera not recognized in device-manager
My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
$ groups
wheel storage users printadmin
The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
The Powershot SX 120 has a MTP/PTP connection mode (as the manual says). But:
# mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
No raw devices found.
gphoto succeed:
$ gphoto2 --auto-detect
Modell Port
Canon PowerShot SX120 IS usb:002,019
A gphoto --summary could be found here
There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
# Canon PowerShot SX120AX (PTP/MTP mode)
ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
With my udev-rule:
solid-hardware listen
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Listening to add/remove events:
Device Added:
udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
Without the active udev-rule, "solid-hardware listen" produces nothing, but
udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
$ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
gwenview_importer: Missing required source folder argument.
(don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
Last edited by quiqueck (2014-02-26 20:10:25)I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details
-
Dc/dvd drive not functioning and not recognized in device manager after installing Windows 7 OS
I have an HP Pavilion laptop, model # dv9617nr, which was originally loaded (from the factory) with Windows Vista. I upgraded the OS to Windows 7 a few months ago, and initially, everything worked fine. Within the last month, however, my DVD/CD ROM optical drive stopped working and is not recognized in Explorer, and does not show up in Device Manager. I have tried a number of fixes from this forum and the Microsoft Windows 7 forums, with no positive effect. I should note that upon inserting a disc in the drive, everything sounds normal (device spins and the external LED lights up) but nothing happens and the unit shuts down.
I have no idea if this is a software or a hardware issue. I did check the HP website for software and driver updates for my model and the Windows7 OS, but HP has no update for this PC running this OS. ANY help is greatly appreciated.Hi
Please find the link given below might help you to fix the issue on your unit.
Troubleshooting CD or DVD Drive Detection Problems
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
I recently purchased my iPod touch with no issues. After updating to iOS 8.1.1 I found that my iPod would no longer appear in the latest version of iTunes and when I searched for Apple Mobile Device usb driver in the device manager, it was nowhere to be found. I've already uninstalled and re-installed ALL components of iTunes and read every single help article. I've tried everything. What went wrong?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Hello all. My system is Windows 7 64bit. In the past my phone worked just fine, plug it into a usb slot, synced up, updated... but for months now it has not worked. Other Iphones will not work on this PC either with their corresponding cables. But my Iphone will also not work when plugged into other computers.. it will not show up at all.. no charge.. no itunes... no drivers show up in Device Manager. My phone works just fine when plugged into the wall with it's cable.. charges fine everything works.. but it will not charge when plugged into a computer.
So far... I have uninstalled everything related to apple... ran ccleaner.. fixed registry errors. Reboot PC, reinstall all itunes and apple components (all latest software) and nothing.
I have gonet o services and stopped and started apple mobile device. It is set to automatic.
I have hard reset the phone and soft reset it.
The cable obviously works. The Phone works when plugged into the wall.
Other Iphones will not work on my pc, nor will my iphone work on theirs
I have disabled windows firewall along with my Comodo Defense Plus and it's firewall. I have disabled my AV. I have scanned with ad aware plus, Avast, ran hijack this and fixed registry errors. Ran Ccleaner.
My device manager does not have anything related to apple in it.. I have no idea why. My Device Manager has no portable devices detected at all and does not recognize anything related to the phone.
Core 2 duo 6600
2gigs of ram
Windows 7 64 bit
I have checked all the tech support stuff I can find. I am desperate. Apple will not help me on the phone without charging me 30$.Also.... my phone works and can do everything fine when not plugged in.. I just can't get my computer or others to recognize the darn thing when plugged in!
-
T430 NVidia GPU not listed in device manager
Hello -- I have a problem regarding the NVidia NVS 5400M inside the Thinkpad T430. I use Windows 8. I'm not exactly sure how it happened, but the NVidia card no longer shows up in Device Manager and the NVidia driver (both the standard driver from their website AND Lenovo's Optimus driver) refuses to install, complaining it can't find any compatible hardware. Device Manager does not list any graphics cards or unknown devices, and as far as Windows is concerned the NVidia card does not exist.
Here's a summary of what I see:
In Discrete Graphics mode -- my Linux installation (which uses native NVidia drivers) works fine and uses the NVidia card. Windows 8 boots and runs with a generic graphics driver; there is a performance hit, and no graphics cards or unknown devices are listed in Device Manager. That's the problem I want to fix.
In Optimus mode -- Windows 8 boots and runs with the Intel integrated graphics (Intel HD Graphics 4000) which is listed in Device Manager. Again, no other graphics cards or unknown devices are listed.
I appreciate in advance any help towards getting the NVidia drivers installed successfully!
Solved!
Go to Solution.nsrathjen wrote:
Yep, still doesn't appear that the NVidia drivers from that package are installing. If I boot in Optimus mode, only the Intel card is shown in Device Manager. I'd like to not have to use Optimus and just stay in Discrete Graphics mode if possible because Linux support for Optimus is not very good.
Would completely uninstalling all the drivers possibly help?
Before you go through that hassle, try the following:
1. Go into the BIOS Configuration Display setting and change it to Discrete only. If you see a setting just below display that talks about OS detection, disable that as well otherwise it will try to flip back to Optimus. F10 to save and exit.
2. Go back into the BIOS settings and verify the setting was really saved. Exit the BIOS settings (discarding this time) and boot Windows normally.
3. Go to C:\DRIVERS\WIN\VIDEO\NVIDIA and run setup.exe. Use the Custom option for the mode after it does compat checks and asks for you to agree to the EULA.
4. When you see the list of custom installation options, turn on the "Perform a clean installation" checkbox. This should not present a problem if you don't have custom profiles.
See if that works. -
1394 net adapter not working in device manager
I,m running the KT4 Ultra with fire wire on board with XP prof. Every thing is working fine except in device manager I have two listings for the 1394 net adapter.The first has the yellow explantion mark, Code ten."this device won't start. And the second is working but listed as 1394 net adapter #2. On the adapter it has two bhig ports and one small port.I quess the small port is for cam corders. Can I disablr the first 1394 in device manager and just keep the second one. I don't have and fire wire cables so I don't know if the adapter is working on all ports. Thanks Bruce
KT4 Ultra/Lan
2800 Barton/333
ATI 9700pro
Creative augll plat.
512 Kingston 2700 DDRBIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag). Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF) -
Xpower ac adapter not showing in device manager
Help!!
this is my third board and have just reassembled this board yet again trying to get the Bluetooth/wifi adapter to work yet again.
The adapter is not showing in board explorer or device manager. I have reseated this numerous times and have tried a different adapter with zero luck. I sthere a bios setting to enable this? I am currently using bios 1.5.
Any help would be greatly appreciatedBIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag). Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF) -
U300s Trackpad does not appear in device manager
Recently I had an issue where I needed to reinstall windows. I downloaded a legitimate ISO and reinstalled it. When I went to reinstall all of the drivers, I had an issue with the TrackPad driver. I know it is a Cypress Touchpad. When I try to install the driver I get this error message: "Cannot find Cypress Trackpad!". It does not show up in the device manager (only my USB mouse is under the Mice and Keyboard menu.) My question is this: What can I do? I can't reflash the BIOS because I already have the latest one and WinFlash won't let you flash a BIOS with the same or earlier date on it. I have checked and the connection to the motherboard is very secure. What other options do I have? I'm not pleased in the least with this error. Any help is appreciated. I know computers well so if there are any solutions that are on the technical side, throw them at me! Thanks!
As a side note, I used a generic (read: non-OEM) windows ISO because Lenovo does not have a customized (OEM-specific) one easily accessable online.
System Overview:
Lenovo U300s
Intel Core i7-2677M @ 1.8Ghz
4GB RAM
Windows 7 64-Bit SP1Hi, I recently upgraded to win8.1 and accidentally made it a fresh install soo it was pretty fresh... haha
Well, my touchpad was working but it wasn't recognized in the device manager, someone said that I may had to reinstall the driver that came installed when I bought it, Lenovo has them avaliable here: http://support.lenovo.com/en_US/downloads/default.page?#
After installing it the icon appeared again and I had the options avaliable in the device manager and everything... I think that may be the problem.
Maybe you are looking for
-
Good Morning I hope I am posting this in the correct forum, and apologies if this is not the correct place. I'm currently doing some work with a client around integration of SAP with our banking application. To this end, we have been requested to pr
-
Table Control Variant For ME21N - Item level - account assignment tab.
Dear All, I want to change Table Control Screen that is in Me21n(Service PO)>Item level> Account Assignment tab -> Table control. In that table control i want to add one column Name is OrderNo(AUFNR) ,but system is not changing the table control. Wh
-
I thought the new icloud drive would function simlarly to dropbox or google drive. How do import a photo taken from my iphone or ipad to my icloud drive storage space?
-
please can anyone help with the above
-
Hi All, I am getting the follwing exception when i am running the My faces application . 2006-07-10 11:51:25,233 FATAL [org.apache.myfaces.util.StateUtils] Cannot encode Object with Base64 java.io.NotSerializableException: org.apache.log4j.Logger