BlackBerry Storm Not Working Please HELP!
One day iI was using My BBS like any other day and it turned off unexpectedly. I tryed turning it back on and that did not work. I charged it, that also did not work. Then after that I even bought a Brand New Battery. That also did not work. Then I bought a cable to connect it to the computer. That also did not work. The Outcome/Results of all of the things that I did were the same the screen is Black and a red light appears. Then the screen turns white with a Battery with a lightning bolt for about five minutes. Then that goes away the screen turns black and a small white sqaure with a line moving in a circular rotation.
KailaWoods wrote:
When i said i checked, i meant i checked the moisture indicators, they're all totally white, no pink or red at all.
Ahhh...OK...so one of the ~6 possibilities. Thanks for the clarification. However, it's been known for moisture damage to cause exactly your symptoms with no change in the indicators. I'm not saying this is the cause...it's just one of many possible causes. So you still have some work to do in order to figure it out.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Blackberry buttons not working, Please help!
I was using my blackberry and all of a sudden the trackpad started have a slow reaction time. THen when i went to hit the button to select it wouldn't. Now if i press the talk key the letter jk come up, if i hit the blackberry button the letters ij come up, whenever i hit the trackpad the letter hi come up and whenever i got the end call button the letters mn come up. I can't do anything on my phone because of it. The rest of the keyboard works, does anyone know how to fix this? Please Help!
KailaWoods wrote:
When i said i checked, i meant i checked the moisture indicators, they're all totally white, no pink or red at all.
Ahhh...OK...so one of the ~6 possibilities. Thanks for the clarification. However, it's been known for moisture damage to cause exactly your symptoms with no change in the indicators. I'm not saying this is the cause...it's just one of many possible causes. So you still have some work to do in order to figure it out.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report". -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
The click at touchpad is not working, please help!!!
I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!
For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
Maybe you are looking for
-
I have to register every time I open a CS6 program
The just started last week. When ever I open CS6 the Adobe app manager opens and wants me to register it yet again. This often happens when I am not on the internet so have to pick the Trial button to work. What has changed and why do I have to keep
-
Error in JMS Communication Channel not raising alert
Processing Errors in JMS Communication Channel are not raising alerts. The settings on the communication channel retires are set at 3 and 5min interval. In RWB the JMS communication channel shows processing errors but an alert is not raised. The aler
-
MultiLineCellRenderer (TableCellRenderer) not working in 1.4
I have the following custom TableCellRenderer I use to display a multi-line cell in a JTable. The row height is suppose to adjust itself automatically so that all the text is visible. This worked perfectly fine in 1.3. In 1.3, the JTextArea was given
-
I have a Mac Pro, obviously, and am considering using a Raptor drive for my boot drive. I am new to Raptor drives, so can someone explain a few of my questions so I can determine if it is worth my money and time? Basically, I am a photographer, shoot
-
Can't see my Airport Extreme base station
I wanted to upgrade my Base station's security to WPA2. So I went to the Airport Admin utility - But the base station does not appear there. My base station is set to be a close hidden network so I suppose that was the reason why it didn't appear. So