Blackberry torch does not get charged with a car adapter?

Blackberry torch 9800 gets charged from laptop and wall mount.
When I tried using thru car adapter it would not work.
I have checked the adapter, it charges the other non blackberry mobile.
My Question, do we need to have a special car adapter for blackberry touch OR
do we need to make some changes in the setup

That would be unlikely for a couple of reasons:
1. The handset is only 4 days old.
2. It charges flawlessly using the same cables on every other source - AC wall charger, laptop, PC, BB charging cradle, aan also an AC wall charger plugged into a cigarette lighter inverter! It always works in these scenarios.
The only time it fails (and quite consistently) to charge is when the charging source is a car cigarette lighter USB adapter. And it fails whether you use it in a car or with an AC wall cigarette lighter converter.
Please take a look at my other post from last night - I described all the things I tried.
If u still feel it is my handset, I would appreciate a referral to at&t. Minimally, I would like to try a new handset before replacing this one. It takes a long time to get it configured the way I want it.
Thanks,
Ashoke.

Similar Messages

IPod with dock connector is not getting charged with car charger and iTrip

My iPod from 2003 with dock connector is not getting charged in my car by using the griffin iTrip with USB car charger. iTrip works, but not the charger. Maybe there´s not enough power output from the car charger? Only 5.0V with 400mA are coming out. iPod needs more? 12V with 1.0A?
Does somebody have information about that problem for me?

Has Apple dropped support for older model iPods?
Nope. Support is still there, even back to the original 1G iPod with the wheel that actually turns. I have a 3G iPod, and it syncs just fine. There have not been any software updates for years, but the old software still works fine with the latest iTunes.
You have to use FireWire, which you seem to be doing.
Try putting it into Disk Mode first, then connect it.
http://support.apple.com/kb/HT1363
Does the iPod currently play music as it should?
Do you have another docking cable (FireWire) that you can try? FireWire connectors often get worn and they no longer work, although the power connection can continue to work.
Did you try the other FireWire port in the iMac?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

Dispute case does not get updated with subsequent partial payment

Hi Experts
I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
Process step 004: Change not possible, process step 003 missing
Message no. UDM_MSG037
Diagnosis
The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
System Response
The dispute case could not be changed.
Procedure
In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
Your kind feed back is highly appreciated..
Regards
Mahmoud EL Nady

Hi
Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
Regards
Mahmoud El Nady

String does not gets splitted with "|"

String does not gets splitted with "|" ?
String str="abc#def|ijh#klm";
String[] pieces=str.split("|");
System.out.println(pieces[0]);

'|' has special meaning (OR) so you need
String[] pieces=str.split("\\|");

I brought apple lightining cable from authorised shop , but my i phone is not getting charged with that how can i know its orginal or not there is no printing on that cable and the wire is little harder than which i was using before it came along pho

I brought apple lightining cable from authorised shop , but my i phone is not getting charged with that how can i know its orginal or not there is no printing on that cable and the wire is little harder than which i was using before it came along with phone.., Please let me know is the cable is orginel or not ..

the phone says it is not charging even though it actually is. Check and see if that's the case. A very underhanded trick by Apple so they can charge 10 times what the cable is worth. They do not win admirers by that proprietary trickery.

HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

When I add an event to my ipad it does not get synced with any other calendars on my other devices.

My calendar on my ipad will sync with any information added on my android phone or on my PC but if I add information directly on my ipad it does not get added to my PC or phone.

Do you have iCloud?
As it states hereyou need it tp sync.
Allan

Blackberry does not get charged while talking on the Phone.

Hello All,
I had purchased my Balckberry perl 8100 about a year ago...but untill recently I never noticed this problem with my phone. My Phone doesnt get charged while I am talking. I have asked all my friends and it appears there is a problem with my phone. Can anyone please suggest what can be done?
Message Edited by Veena on 09-10-2009 08:55 AM

Well, it's hard to say for certain...but BB's are designed to shut down once power level reaches some amount -- see this KB for those levels:
KB04552 Battery level indicators
It may be possible that the charge coming in is less than the amount being consumed on a call, resulting in a net drain from the battery, ultimately resulting in shut down...but frankly that sounds invalid to me, though I've no way to be sure. Perhaps your charger is somehow faulty? I honestly rarely let my battery drain to such a low point...and also carry a spare battery just in case.
I've searched the KB's for all kinds of search strings with no luck to your specific situation...but perhaps you'll do better? Here's the link to the public KB's:
http://www.blackberry.com/btsc/microsites/microsite.do
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My blackberry z30 does not turn on with red light flashing

hi i have a blackberry z30 , after charging my blackberry z30 it does not turn on and show me a red light blinking 5 times...what i should do? please help.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):Connect your BB to the wall chargerLeave it alone for 2 hours, no matter what the LED or the display doesHold the up/down volume keys until the device is fully powered offWait 15 minutesPower up normallyWait another 2 hours, no matter what the LED or the display doesThis has been known to "kick start" some BBs. If it fails, then please try again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours. If it fails to help, then your next step is in-person evaluation by a qualified technician. If you remain in warranty, seek support under those terms. If you have no warranty, then seek out a local (to you) shop with a qualified technician and have them provide you with a proper evaluation and estimate.
Good luck and let us know!

HP 4340s Battery does not get charged.

Hello everybody
I own a Hp probook 4340s. The battery was just fine, like holding up to 5/6hours charge. One fine (!) morning the battery stopped getting charged. I thought it was battery fault and I purchaged a new one and that also doesnot charge.
If I take out the battery the laptop works fine with the AC adapter. But if I put the battery in and plug the AC adapter the computer does not work, the indicator blinks 8 times in white color (generally, color of indicator is orange when it gets charged) and then stop.
I dont know where the issue is.. from the little I understand the battery is fine the charger is fine but for some reason the circuit inside the computer cannot charge the battery?!
Can anybody help please?
Thank you for listening me and highly appreciate if I get the right solusion.

Hi,
Plese update the BIOS
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5229481
If the issue persists,then Motherboard needs to be replaced.
I'm an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

CommandButton code does not get executed with partialSubmit=false

Following code in Jdev11g
<input type="text" value="#{myBacking.text}"/>
<af:commandButton text="Click" action="#{myBacking.doSomething}"/>
<af:commandButton text="Click" actionListener="#{myBacking.doSomethingElse}"/>
public void setText(String value)
   System.out.println("Setting value");
public String doSomething()
   System.out.println("Clicked");
    return "";
public String doSomethingElse(ActionEvent e)
   System.out.println("Clicked with event");
} I always get following output:
Setting valueI never see the output from my commandButton. It seems that my button does not executes it's code but just notifies the components to call their setters.
I notice that when i set the partialSubmit to true, de code do get executed.
Why is that and what is causing this behaviour? How can i use my own code in the buttons without setting the partialSubmit to true? I do need a complete refresh of the page and can not use the partialSubmit but when it's set to false, it ignores my code...

They are inside an af:form
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <af:document id="doc1">
      <af:messages id="m1"/>
      <af:form id="frm1">
           //MY buttons are here
      </af:form>

C6 does not getting charged

Hello, I recently bought a nokia c6.Charging does not complete while it is switched on. I waited more than 6 hours but it was not completed and battry drains after 8-10hours. but it get fully charged if i switched off and charge. what should i do?

It may be that something is using up battery in the background that uses it up faster than you can charge it. For example, leaving Joikuspot on has the same effect. As for 8-10hrs of battery life, it depends on how you set it up, as personally, after I set up a phone to my personal settings, that how long mine will last.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

BBP_DOCUMENT_TAB does not get populated with shopping cart

Hello Gurus,
We are facing some weird issue out of blue. We have SRM 5.0 Classic scenario with ECC 6.0 backend system. We have everything configured and it was working i mean shopping carts were successfully transferring into ECC system as PR.
Suddnely now we are getting error Item in transfer process for all the shopping carts. While checking into RZ20 monitor it shows following error " Backend application errors: Shopping cart (PReq. 7000027359): W5 002 No items exist (not possible to save)".
When we put debug in CLEAN_REQREQ_UP we found out that table BBP_DOCUMENT_TAB which should get populated whenever shopping cart is approved it not getting any data.
Could you please let us know what could be the reason? As all the user IDs with which RFC's are maintained at SRM and ECC level active and all proper authorization are there.
Please advise.
Thanks
Ritesh

Hello Ritesh,
Actually, the document tab is updated by the SC transfer (SC spooler). Each time the system starts the shopping cart transfer, an entry is created in BBP_DOCUMENT_TAB until the CLEAN_REQREQ_UP is executed.
You could debug the shopping cart transfer and check if the follow-on document is being created.
Also, you could check the SPRO customizing -> SRM SERVER -> Techcnical Basic Settings -> Set Control Parameters, and check its value.
As additional information, you can check the note 1173815, which provides some information regarding the follow-on document creation (customizing tables).
I hope it helps.
Kind regards,
Ricardo

BlackBerry Torch is No Longer Pairing with my Car

My phone and car work working fine together recently it stopped.
My Phone said it was connected but if I tried to make a call it would disconnect right away..
I tried deleting the device from my phone, and my phone from the car (Dodge Journey)
And tried to re-pair them.
Now when they pair the Stereo pairs but handshake will not connect.
I know this is an issue with my phone, because my husbands phone has no problem connecting to the car.
I have a Black Berry Torch 9810
Software 7.1.0 Bundle 921
It says my phone is up to date.
I travel a lot and need this fixed ASAP!

Hello MELANIEUR,
Welcome to the BlackBerry Support Community.
Thank you for your question regarding the Bluetooth connectivity issue you are experiencing between your BlackBerry Torch 9810 smartphone and your car kit.
Please backup and perform a reload of your BlackBerry Device Software. For more information on this procedure see the following article:
How to update or reinstall BlackBerry Device Software using BlackBerry Desktop Software:
http://bbry.lv/NWPC6y
In the case that this process fails to resolve the issue, please contact your point of sale for options.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Blackberry torch does not get charged with a car adapter?

Similar Messages

Maybe you are looking for