Blackberry Tour USB Drivers for MAC

I am trying to revert back to Pockmac for sync (the new BB desktop software is horrendous), does anyone know if I can get the USB MAC drivers for the tour, every link I follow takes me to the download site for the new desktop software. I want the drives only. I tried to unbundle them from the new desktop software but was unsuccessful.
Thanks,

A reboot fixed it.

Similar Messages

Wireless usb adapter EW-7711UAn, drivers for Mac OSX 10.9 (Mavericks)

Hi,
I have recently got a wifi usb adapter (above indicated) as my airport card is not working anymore and I needed a quick cheap option... After hours and hours trying to make the new device work, it seems the problem is the version of the drivers (there´s not drivers for Mac OSX 10.9) or that´s what I think. Does anyone know something about it? In the meantime I am waiting for an answer from MediaTek (the owner)... I´ll let you know if as soon as I get a reply what happens
cheers!

this adapter is using the chip RT2870 of Ralink. You can download its driver for OSX 10.9 frome Ralink website.
http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502

64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available. There are many users reporting Palm Desktop 4.x is also working.
I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable.
The drivers are located here:
Aceeca Driver Downloads
Installation instructions (from Aceeca) for Windows 7 are included in the download.
Basic instructions:
1. Download the drivers and Extract them to the same folder. Remember the folder you extracted them to.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck!
NOTE: Palm Desktop 6.22 may only show Media and Install. Here's how to fix that:
If Palm Desktop 6.2.2 only shows Media and Install, try this: Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator". The ther modules should appear.
To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
Close Palm Desktop, if open. (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location". You will now see the actual file for the shortcut.
Right-click on the "Palm Desktop" shortcut file, then Properties. Now pick the Compatibility Tab at the top.
At the bottom of the Compatibility Tab is a checkbox: "Run this Program as Administrator", Click OK .
Try opening Palm Desktop, all the parts should appear. You may see a box open when you close the program asking "Did the program run correctly?" I picked "Yes", and it's been working fine since then!
If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
Palm HotSync Setup
WyreNut
Forum member bobboffin has added this post:
"After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers per the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1 --- bobboffin"
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
This question was solved.
View Solution.

Thank you so much. I was thoroughly disappointed to see that the support telephone for paid support had been discontinued. I thought I would need to replace my (ancient but serviceable) Z22.
I followed the instructions listed here and am very happy to report that I completed a sync!
Thanks again.

New ipad USB drivers for pc running on win7

Error message when downloading USB drivers for new iPad for win 7 (64 bits)

My husband's laptop which is at least 3 years older than mine has not problem with charging or recognizing my IPAD. So I don't think the USB ports have anything to do with this problem. What I see is that the PC wants to load MTP USB driver which fails. I have the Apple Mobile Device driver installed and activated. My computer does not see the IPAD but Itunes does. How do get the PC to recognize the apple mobile device driver before it tries to download the MTP USB driver? I am going to try the last suggestion from Diavonex to see if it will work. This is sounding more and more like a Windows problem. BTW both my and my husband's laptops are Dell so I might try looking there also. Wish I had an answer.

Netgear w11v2 drivers for mac os 10.2.8 - imac?

netgear w11v2 drivers for mac os 10.2.8 - imac?

That's better, there was a "G" and a "1" missing in your original post.
This Netgear page:
http://kb.netgear.com/app/answers/detail/a_id/714
shows the oldest Mac driver that NetGear offers for the WG111, and it requires 10.3 or higher. You have 10.2, correct?
Google the phrase "netgear wg111 mac drivers" There are quite few discussions--too many for me to read today--in other forums about the WG111 on a Mac and most are not happy ones. Some successes are reported, but by people running higher versions of the Mac OS than you have.

Musicord Cherub MRD-41 Recorder: USB-Driver for Mac

Hello,
I am searching for the USB-Driver for Musicord Cherub MRD-41 Recorder. Searching for it along the internet did not give any matching result.
Originally a CD containing the USB-Driver for Windows was included with the product. Since we now work with Apple-Products this does no longer work. Connecting the device to a Mac (as it is normal these days) and hoping, that it will work without any additional Software does not give any result.
On the Original-CD the manufacturer states, that the USB-Driver for Mac can be downloaded at www.apple.com but there nothing can be found anymore.
The recorder has been bought about 6 years ago (used under Windows then). Now we would like to use it again under Mac-systems (10.6 and 10.7).
Does anyone know, if, and where help can be found?
Thank you very much

If it uses MIDI, Garageband can often read it.

Need help on USB hub for mac air 13 inch (2 external hardisk and Iphone)

Hello everyone, I am a new macbook air user, and currently using 2 external hardisk of 1TB and 2TB. I am looking for usb hub that support both of my external hardisk, ethernet and iphone too. The problem is, limited usb hub for mac air and bad review on balkin product, any advice for me?
One more thing, I just moved from window to mac for the first time, and bought Western Digital 2TB external hardisk, the problem is, I can't save any video/audio file that I downloaded from internet in macbook to be transfer/move to this WD 2TB external hardisk, except for back up and time machine. It refuse to except any file that I try to move in to the external hardisk Can anyone help me? compactibility problem?

First, I have not found any of my hubs to have an issue with my MBA. Just make sure that if any peripherals you attached to the hub are adequately powered. Either by having the hub independently powered, or the devices having their own power supply.
The drive problem you have may be due to the file formatting. If this drive is formatted NTFS, then in many cases you can write to it using a network protocol, but OS X can't write to it if attached directly to the computer, e.g. USB, SATA, FireWire. You will neeed to either format the drive as a HFS+ drive, or use software that enables OS X to write directly to t a NTFS formatted drive, such as NTFS-3G. DISCLAIMER: As the information you provide for your circumstances is limited, this is but one suggestion amongst many, that explain your situation.

USB drivers for Ellipsis 7 tablet ...

Does anyone know where I can find the USB drivers for my Ellipsis 7, needed for development work?

Verizon Ellipsis 7 Drivers

TS1369 unable to install usb drivers for ipod/ipad/iphone, even after following steps from diagnostic testing

I have followed the steps suggested to reinstall the USB drivers for my ipad/ipod/iphone products, but receive a message that says one of the installers cannot perform the installation at this time. I've tried numerous "other" times, but get same msg.

Hi 2010c309a,
I understand you are having issues with your scan software on your computer. I recommend a complete uninstall reinstall.
The HP uninstaller program might be available on the printer CD, depending on the printer model. If you have the printer CD readily available, try this option to quickly check whether you have the HP Uninstaller, and then run it. If you do not have the CD uninstall all HP printer software from the control panel. Here is a document you could look at for help.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02259020&lc=en&product=3737195&tmp...
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started.
Scroll down to Windows imagine Acquisition. Startup type should be - Automatic, and Service Status should be - started.
Restart the computer after this step and try installing again.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Drivers For Mac OS X 10.3 (Audigy 7.1

Hi! I bought an Audigy 7. SE recently to replace a standart built-in sound card in my G4. I chose it keeping the hope that I'll find drivers for it on this website =) Unfortunately, I've made a mistake. I searched Google a lot, but it gave me noothing too. So, my question is - can I find drivers for Mac Os X anywhere?
looking forward to hearing from U,
Abadd0N (RUS)

I don't think so....at least there isn't an official Mac driver from creative. No much of a Mac user myself...so probably see if others can suggest anything to u.

What's the filename of drivers for Mac standard CDC-ECM?

In System/Library/Extensions, I try to find the default embedded drivers of Mac CDC-ECM which is for USB Ethernet and can't find it. Besides, there is also a default USB modem driver found by my standard CDC-ECM device.(PID is 900D) Where are the default drivers and can I remove them ?
Thanks,
Jason

The App Store has no web page. You access it directly from the App Store program in the Applications folder.
If you bought Mountain Lion through a web site, please provide a link to this "store". If there's any truth to my guess at all, you bought an illegal copy from a site not owned by Apple.

Blackberry tour usb charging problem

A few days ago I tried to charge my tour with a (cheap or thinner) usb cord and it would not charge. That night my phone did not charge correctly and then the next day I observed my phone sometimes showing charging when it was not. Now my phone will not charge at all when connected to the usb wall charger, nor the computer with the blackberry provided usb cord and all peoridically I get this message
"The charging source connected to your BlackBerry device cannot charge your battery. (More Information)"
Then "Some USB hubs might not provide enough power. Plug the hub into a power outlet (if available) and reconnect your BlackBerry device. Try connecting to another USB port (different computer, USB hub, or travel charger). Verify that your USB cable is securely connected to your BlackBerry device and a USB port. Verify that your computer is not in standby. (OK)"
Since I have tried to connect it with different cables to different computers and also to travel charges I seem to have run out of options.
Here is where I stand, taking the battery out for a while and replacing it did allow me to connect and charge to the computer but as soon as i took it off it gave me the error message and reverts back to the old mode. I also can still charge the phone with my craddle.
Since I was able to back my phone up I would not mind trying to do some sort of clean wipe (like you can do with the computer) but I cannot figure out how to do that.
My phone is out of warranty, Although I am somewhat curious if I get an year extended warranty through my CC or not.
Any help will be appreciated.
Thank You

That is really strange that the battery replacement didn't fix the issue
Options / Security Options / General Settings / Menu / Wipe Handheld
Make sure you have all your data backed up, contacts, and know which apps you want to download again..this will wipe everything. I would call in to vzw and see if your phone does have TEC on it and then you can just get a free replacement if so. If not you can purchase a CPO device (usually half the cost of full retail)

Hp All-in-One 2175 compatible drivers for Mac book pro 10.5

I can print, cut can't scan. Does anyone know if their is scan software that will work with OS 10.5? The lastest listed on the Hp site is from 2006.

Hello brie59, and welcome to the HP Forums.
I see you are having software issues. There is no software for Mac OS X 10.5 for this printer. I would recommend connecting the printer via USB cable and running the Apple updates, to try and utilize the basic Apple print driver.
Please let me know if you have any questions. Thanks for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Good, reasonably priced USB Sticks for Mac?

Hello,
can somebody help me out here please? I am in need of a USB Stick to transfer my important web-development data from my Mac Mini here (in Austria) to my father's Mac Book Pro in Scotland. The problem is that my local Apple retailer can only offer me some 4GB USB Stick for a hundred euro.
I'm probably going to have to buy one such device online, but which? I want one, that works well with Mac, and should probably function well with Windows too. Since there are so many sites to purchase hardware like that at varying prices, there is no real way to talk to someone who can show me what's best for me, as I would in the Apple store.
A hundred euro for 4GB is a little too much for my budget, so hopefully one of you has the overview needed to know which brand or even exact device would suit me best.
-Thanks-

If 4Gb is sufficient for your needs and you can't source an I/O Magic gigabank, then you might consider the 4Gb Lexar JumpDrive Firefly - it certainly works with Macs and PCs, and while it's not particularly fast for writing, read performance is pretty good, and it's very durable.
It can also be bought in the UK from Dell - http://accessories.euro.dell.com/sna/products/USBMemoryKeys/productdetail.aspx?c=uk&l=en&s=dhs&cs=ukdhs1&sku=390-10038#Overview
There's also an 8gb own-brand device at Dabs (http://www.dabs.com/ProductView.aspx?Quicklinx=4F59&CategorySelectedId=11152&Pag eMode=1&NavigationKey=11152,4294955928&InMerch=1) which claims mixed PC/Mac compatibility - and based on my experience of that supplier, I would be prepared to believe them.

Windows drivers for mac os x (10.7.1)

i m using mac os x (10.7.1)...i have installed wondows7 in it. but i didnt get that original boot camp cd...so can anybody tell me how can i get drivers for windows7??

https://discussions.apple.com/community/windows_software/boot_camp
Ask there and do post your MBP specifics (model, etc...).

Blackberry Tour USB Drivers for MAC

Similar Messages

Maybe you are looking for