Blackberry USB Drivers for Windows 7

I'm having trouble getting the drivers installed for my Blackberry on Windows 7. Windows recognizes it as a blackberry and I can access it for storage, but not through Desktop Manager. When I try reinstalling or updating the drivers I get the following message:
What do I need to do to get the drivers installed?
I'm running:
Desktop Manager 5.0.0.11
Blackberry Curve 8330
Windows 7 Enterprise (Licensed release, not prerelease or beta)
Solved!
Go to Solution.

A reboot fixed it.

Similar Messages

  • Re: HP 15-d053sr drivers for Windows 7 x64 not installed

    Hello!
    I have the same problem!!! 
    Notebook HP 15-d053sr, Product No. F7R72EA#ACB, Serial No. [edited by Moderator], Bios Version F.11
    On clean install Windows 7 x64, Can't install all Chipsets, USB 3.0 and Video drivers! Error message: "This computer does not meet the minimum requirements for installing the software"
    On clean install Windows 8.1 x64 Can't install "IMEI" (sp64344) driver and maybe more!
    HP Support Assistant find only 4 drivers (Atheros Bluetooth, Wireless LAN, Synaptics TouchPad and Realtek Audio drivers)...
    Need working, supported, compatible drivers for Windows 7 x64!
    Please HELP!!!

    Hi @Ainars_LV ,
    Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • 64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

    Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available.  There are many users reporting Palm Desktop 4.x is also working. 
    I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable. 
    The drivers are located here:
    Aceeca Driver Downloads
    Installation instructions (from Aceeca) for Windows 7 are included in the download.
    Basic instructions:
    1. Download the drivers and Extract them to the same folder.  Remember the folder you extracted them to.
    2. Try to HotSync your device.  It will fail.
    3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
    4. Right-click on the device, and choose "Update Driver Software".
    5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
    6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
    7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep.  I tried a HotSync and it worked!!! 
    Good luck! 
    NOTE:  Palm Desktop 6.22 may only show Media and Install.  Here's how to fix that:
    If Palm Desktop 6.2.2 only shows Media and Install, try this:  Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator".  The ther modules should appear.
    To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
    Close Palm Desktop, if open.  (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
    Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location".  You will now see the actual file for the shortcut.
    Right-click on the "Palm Desktop" shortcut file, then Properties.  Now pick the Compatibility Tab at the top.
    At the bottom of the Compatibility Tab is a checkbox:  "Run this Program as Administrator", Click OK .
    Try opening Palm Desktop, all the parts should appear.  You may see a box open when you close the program asking "Did the program run correctly?"   I picked "Yes", and it's been working fine since then!
    If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
    Palm HotSync Setup
    WyreNut
    Forum member bobboffin has added this post:
    "After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
    Open up Notepad and paste the following two lines into it:
    set DEVMGR_SHOW_NONPRESENT_DEVICES=1
    start devmgmt.msc
    Save it as SetDev.bat into My Documents.
    Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
    In the View menu select Show Hidden Devices.
    You may now see under the Other heading the failed device with a yellow triangle against it.
    You can now proceed to install the drivers per the instructions.
    Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1  --- bobboffin"
    Hope this helps!
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
    This question was solved.
    View Solution.

    Thank you so much.  I was thoroughly disappointed to see that the support telephone for paid support had been discontinued.  I thought I would need to replace my (ancient but serviceable) Z22. 
    I followed the instructions listed here and am very happy to report that I completed a sync!
    Thanks again.

  • Using bootcamp 5.1, Windows 7 home is installed but missed installing the drivers disk. How to install the Mac drivers for windows after the fact.

    While using Bootcamp 5.1, and OS X 10.8.2, I partitioned my Mac disk with 80 Gigs for Windows 7 home and the install went great, but I must have missed the time when I was to install the Mac drivers disk to install the drivers for Windows,(when in Windows I don't have a mouse or optical drive.)  Is there a way to install the drivers after Windows is installed, or do I have to go through the whole process all over again?

    Press X key after the startup sound to boot into OS X. Then, open Boot Camp Assistant, download Boot Camp drivers and burn them into a USB drive or DVD. Finally, boot in Windows and install drivers

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • New ipad USB drivers for pc running on win7

    Error message when downloading USB drivers for new iPad for win 7 (64 bits)

    My husband's laptop which is at least 3 years older than mine has not problem with charging or recognizing my IPAD.  So I don't think the USB ports have anything to do with this problem.  What I see is that the PC wants to load MTP USB driver which fails.  I have the Apple Mobile Device driver installed and activated.  My computer does not see the IPAD but Itunes does.  How do get the PC to recognize the apple mobile device driver before it tries to download the MTP USB driver?  I am going to try the last suggestion from Diavonex to see if it will work.  This is sounding more and more like a Windows problem.  BTW both my and my husband's laptops are Dell so I might try looking there also.  Wish I had an answer.

  • Problem with drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA)

    Hello
    Please help to find drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA) for:
    1) ACPI\HPQ6007
    2) USB\VID_138A&PID_0050&REV_0060
    It is detected as "unknown devices"

    Hi:
    You need these drivers...
    ACPI\HPQ6007:
    HP 3D DriveGuard Software
    File name: sp67280.exe
    USB\VID_138A&PID_0050:
    Validity Fingerprint Sensor Driver
    File name: sp66110.exe

  • How to install USB driver for Windows?

    I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
    After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
    When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
    There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
    Can anyone make sense of this for me?

    Orthoducks wrote:
    I'll so my best to answer the questions.
    >...what you're looking to do a transfer with...?
    Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
    Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
    >Also, have you tried any other computers?
    No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
    Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
    >And which software version if your phone currently running?
    That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
    Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
    >Often times, the device drivers you're prompted to install are supported solely by the computer's software.
    I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
    You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
    The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
    Good Luck

  • Bluetooth Drivers for Windows 7 for 9300 &8520

    I cannot find any drivers for Windows 7 and my Bluetooth application. Can anybody help please? This issues has been posted before. Come along Blackberry support teams, where are you. Its seems to be OK for Windows XP but not Windows 7!

    So the intent is to stream media from the iDevice to the computer and have it play via the computers speakers?  That sounds like a opening a can of worms that is completely unnecessary.
    If the content is already on the comptuer, simply play it via iTunes on the computer.
    Apple does offer an app called "Remote" for remote controlling the iTunes interface on a computer from an iOS device when on the same local network.  It requires Home Sharing to be enabled in iTunes on the computer.

  • Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

    Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
    Post relates to: HP TouchPad (WiFi)

    @MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
    See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • HT3986 Can anyone help me to get the Tack pad drivers for windows 7 on mAcBook Air..

    Can anyone help me to get the Tack pad drivers for windows 7 on mAcBook Air..

    If you've created the Windows 7 Drivers CD/USB drive, using Boot Camp Assistant in OSX, the drivers should be on there. My MacBook Pro (2010) touchpad works fine with those drivers installed, and I think it's identical to the Air's.
    http://support.apple.com/kb/HT4407 for info on how to create this drive.

  • New drivers for windows 7

    When there will be official drivers for windows 7?

    I fully appreciate this is a user discussion forum.
    BUT, the announcement about the release of the Win 7 Beta drivers is in a post on this forum, dated May 2010. I seem to think that the "first" release was actually earlier than that.
    It is now March 2011 and still the "final release" is nowhere to be seen. I've run the beta for the 0404 (not USB) since it was released; it appears slightly more stable than the previous Vista driver, but quite severe distortion can occur without warning, often to be "corrected" only by stopping and restarting playback of the wanted audio.
    It would certainly be appreciated by those of us who run Win 7 and an EMU card to receive some kind of update as to what is actually happening, not merely the stock answer that "Notices about updates will be posted....".

  • Can you use Windows 7 Support software (drivers) for Windows XP on bootcamp?

    I'm just wondering, I'm installing windows XP on my mac running lion. I don't have my lion install disk but Im able to install 'windows 7 support software' from bootcamp which I put on a usb flash drive. My friend says I can use that for Windows XP drivers but i'd just like to ask here.
    So basically, can I use windows 7 mac drivers for windows XP? If not is there anywhere I can download them?
    THANKS 

    http://support.apple.com/kb/HT5634

  • USB drivers for winXp needed (ms-5169)

    can anyone help me finding usb-device drivers for windows xp?

    Since it's USB1 you don't need any drivers.
    If it's giving you trouble try toggeling the "USB legacy support" option in the bios.

  • TS1369 unable to install usb drivers for ipod/ipad/iphone, even after following steps from diagnostic testing

    I have followed the steps suggested to reinstall the USB drivers for my ipad/ipod/iphone products, but receive a message that says one of the installers cannot perform the installation at this time. I've tried numerous "other" times, but get same msg.

    Hi 2010c309a,
    I understand you are having issues with your scan software on your computer. I recommend a complete uninstall reinstall.
    The HP uninstaller program might be available on the printer CD, depending on the printer model. If you have the printer CD readily available, try this option to quickly check whether you have the HP Uninstaller, and then run it. If you do not have the CD uninstall all HP printer software from the control panel. Here is a document you could look at for help.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02259020&lc=en&product=3737195&tmp...
    First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started.
    Scroll down to Windows imagine Acquisition. Startup type should be - Automatic, and Service Status should be - started.
    Restart the computer after this step and try installing again.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for