Blackberry visor mount speakerphone vm-605

Have Paired this device and it will do well when call come in. But when I say a phone number for it to call, it scrambles the number and then dials the wrong number... help:

what phone are you pairing it too?
have you tried to reset the VM 605 via the pin on back and re pair it?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

Is it possible to pair the playbook with the BlackBerry Visor Mount Speakerphone VM-605?

Can i listen to my music from my playbook with my
vehicle's stereo system by using the Blackberry
Visor Mount Spwakerphone VM-605?
Is it possible to pair the playbook with the
BlackBerry Visor Mount Speakerphone VM-605?

From what I've seen here and @ Crackberry yes once you've gotten the 2.0 upgrade.
Information Technology is fun! Play with IT.

The BlackBerry Visor Mount Speakerphone VM-605 compatability ?

For anyone who has tested this new accessory, is it compatible with other devices than a BB. One of the two phones in our house hold is the LG Envy 2. I was not sure if this speakerphone would pair with this phone also.
Thanks

Doesn't say only Blackberry devices. That list is Blackberry devices that it's compatible with.
Right above that, it says Compatible with other Bluetooth® enabled devices.

BlackBerry Visor Mount Speakerphone Review

I've had a chance to play with the new BlackBerry Visor Mount Speakerphone for the past few days and thought I'd start a bit of a review. I'd like to encourage others who've had a chance to play with it to add to this.
Initial impressions
After pulling the BlackBerry Visor Mount out of the packaging it came in, I took a look. One button on one side, a +/- button on the other side, and a single main button on top of the unit. There was also a microUSB plug in on the side as well. Overall, it makes for a very simplistic design that looks sharp. On the back side of the unit is a clip which can be used to attach the BlackBerry Visor Mount to your car's visor (makes sense ). Simple design but effective.
Initial Connection
My Visor Mount did not come with instructions, which left me scratching my head for a second... how was I going to learn how to use it, and would I make any major mistakes??? Good news, it's incredibly intuitive to use. To turn the unit on, press and hold the main power button until it tells you it's on. The first time it turns on, it'll go into pairing mode. Just search for it with your BlackBerry device and as with most other bluetooth headsets, enter 0000 as the passkey. After that, the friendly voice will let you know that the unit has paired.
Call Quality
To make a phone call, just press the main button for a second and the voice activated system will prompt you for your instructions. Just be careful not to hold the main button for too long or the device will turn off (I've done this a few times already). It's also an easy disconnect - press the button again and you're done. To answer a call, press the button once and you're connected. Call clarity was actually very impressive. According to family members and boyfriend, it's much better than when I have them on speakerphone, and the speakerphone on my Storm was already pretty decent, so that's a good sign! So far, I've used the Visor Mount as a speakerphone only (i.e. not connected to my car stereo) and I've had no problem hearing the other parties through the device. The only instance where the other person was unable to hear me is when I went over a section of road with several bumps. Other than that, no problem. (Note, to change the volume of the speakerphone, use the same +/- button that changes the FM stations - this only works in the non-FM mode).
Another really neat feature? When you receive a call, the friendly voice tells you the phone number of who is calling you (requires Caller ID is enabled on your phone)!
FM Transmitter
I tested the FM transmitter on my home stereo and had no problems getting it to work. Just press the FM button and you're up and running. If you need to change the station to get a clearer signal (default is 88.1), just press the +/- button to change the station. The friendly voice tells you what station you're on so you can change your stereo to the correct station. Sound was generally pretty clear (some moments of interferance) and overall, I'd have to say this is one of the better FM transmitters I've used (and I've tried a few over the years - the next closest was a Sony one). One of the big problems I used to have with FM transmitters is that I usually had to crank the volume, and I didn't have as much of an issue with the Visor Mount. The only time I did notice a decrease in volume was when I tried watching a movie on my BlackBerry Storm, but regular audio worked just fine. To go back to regular speakerphone mode, just hit the FM button again to turn it off.
Overall Quality
I have to admit, I'm pretty impressed. The BlackBerry Visor Mount does the job it's supposed to do, at least for me, and at a lower cost than some of it's competitors. It's also really nice that I don't have to hold my phone while I'm talking and driving (much safer) and I'm not always trying to put my bluetooth headset back in my ear because it's falling out yet again. And I now finally have yet another reason to set up my extensive music library collection into playlists! When I'm done, I just hide the unit so no one steals it and it turns itself off when I walk out of bluetooth range of the car.
At this point in time, I'm not sure that the BlackBerry Visor Mount/BlackBerry Storm combination will be used to replace the 20GB hard drive in my car, however it'll definitely work if I'm in other people's cars! Or for when I replace my precious VW Golf! But it now gets used every time I get in my car. I just put it on the car visor, turn it on and I know I can safely leave my BlackBerry Storm in my bag/purse where it belongs.
Rating
I'm going to give this a 9/10. It's an excellent accessory for BlackBerry owners, but hey, we can always leave a little room for improvement!
Good job RIM
EDIT: Added link and image.
Message Edited by Krypto on 06-09-2009 12:29 AM
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Bifocals wrote:
I also was able to test the The BlackBerry® Visor Mount Speakerphone VM-605.
I agree that the device does everything advertised and does it well.
I have two areas I feel it could be improved;
1) increase the volume of the speaker phone, I have trouble hearing the commands.
2) increase the transmitter. There are very few "dead": channels in a major city and
and It would be helpful if the transmitter could have a stronger signal.
Otherwise the device is a very valuable and useful addition to the Blackberry line of accessories.
Thanks,
Bifocals
My truck is setup for four wheeling, and sits 6'5" . While removing the device I fumbled. During the ensuing "tip drill"
I managed to get a hand on it twice. Unfortunately the second tip knocked it out of the truck higher than the roof, and provided
a 7ft fall to the concrete below. Amazingly not a crack anywhere, just a slight scratch where it hit.
Apparently I didn't think that was through enough of a test. While putting the speakerphone back...well you guess it, I dropped
it again. This time it bounced off the floor and back onto the concrete. This time, not even a scratch.
After closing the truck door, rolling up the window, and using BOTH hands, it is back on the visor, where it will live out it's life.
One other thing that impressed me?
"She" is tough as nails. Never screamed or yelled for help, and not a tear afterwards.
Message Edited by Bifocals on 06-12-2009 10:50 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Transfer contact between blackberry 8900 and visor mount speakerphone vm-605

I am using visor mount paired with my curve 8900 and it is working well
the only thing I am not able to get, is to transfer contact from my smartphone to the visor mount, so when I get a phone cal it is never recognized, and the voice tells me only the phone number
blackberry 8900 v4.6.1.250 (platform 4.2.0.113)
any suggestions?

you need OS 5 on your phone for that feature to work.
Manual device OS upgrade instructions:
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. This step is not needed unless there is an issue on next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to step 6
6. remove internet connection to PC and reboot PC.
7. Plug in BlackBerry and double click on "Loader.exe." It's located in the same place as the above vendor.xml file was in.
8. if you did Step 5, restore from back up. Follow this KB if needed http://www.blackberry.com/btsc/KB10339
Enjoy the new OS.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Visor Mount Speakerphone VM-605

The attachment wire used to attach the speakerphone to the visor is lost. Where can I get another one?
Brenda

You might try shopblackberry.com, and if you don't see it listed, call them.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BlackBerry Visor Mount Speakerphone VM-605

Is the BlackBerry Visor Mount Speakerphone VM-605 compatible with the Z10?

Hey JHG42,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
The BlackBerry Visor Mount Speakerphone is compatible with the BlackBerry Z10 smartphone.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

VM-605 visor mount speakerphone

Hello everyone and thanks for having me.
My problem is with the VM-605 visor mount speakerphone. It connects and disconnects all the time and the most agravating is during a call. Can anyone shed some light on my problem?

Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
See if this won't help: Manually connect BB to speakerphone
Keep your eyes on the road and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Bold 9700 and Visor Mount VM-605

Hello, I am new to this forum and this is my question: I install desktop manager V6 the other day & when i connected my 9700 to it is gave me the option to update the OS on my device I installed it & now my BB Visor Mount Speakerphone VM-605 will not connect to my 9700. I have delete it and set it back up again. My BB will connect to the visor but call still go trough the handset & not the visor.
Blackberry 9700 OS v5.0.0.862(platform 5.1.0.175)
Thanks for any help.
Michael

delete the pairing and try again
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Bluetooth problem: Visor mount Bluetooth

I have this blackberry visor mount Bluetooth car fm transmitter. Works fine with the iPhone and my Blackberry but when attempting to use the fm transmit the iPad does not seem to connect properly. Unsure why maybe os4 ?

The following are the bluetooth profiles supported by the different iDevices. There are differences between the phone and iPad.
http://support.apple.com/kb/HT3647

Answering calls on the VM-605 visor mount

I just purchased the VM-605 visor mount and it appears to work fine other than it does not let me know when I have an incoming call other than for a little light to flash on it - no beep, ring, "call from . . ." prompt, etc. What have I done wrong? I don't want to have to stare at it while driving just to find out if someone is trying to call me.
Dubie
Solved!
Go to Solution.

I figured it out - all I had to do was turn the ringer on my phone to "silent" and it started working.

Blackberry visor speakerphone and verizon navigator

Maybe I am missing something but I cannot figure out how to get my verizon navigator to play through this speakerphone, any help would be appreciated, thanks. I have a curve 8330.
Solved!
Go to Solution.

jonny772 wrote: .
OK i read this already and it didnt answer my question,
Acutally, you didn't state above what you had read or done. (My mind reading skillz are slow on Monday )
We're just trying to help here... helping us know what you have done in advance certainly cuts down on the clutter in these threads.
jonny772 wrote: I have verizon navigator, is it not a 3rd party mapping app?GPS is enabled, its not blackberry maps. Verizon navigator has voice prompts, meaning it talks to me.
Actually, Verizon Navigator is a third party application. Is not part the native RIM Operating System (say, like the clock, blackberry maps andthe browser).
So, you said you'd read that document, but have you done what it instructs?
1. Have you paired the VM to your BlackBerry?
2. Is your BlackBerry > Options > GPS set to Location ON?
3. Does Verizon Navigator work ok to navigate and voice announce on the device?
All that is needed then is the pairing of the devices. You'll hear the voice over the Visor Mount.
If you want the voice assist over the auto speakers too, you'll need to follow the directions to set the VM to the proper FM channel.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Visor Mount VM-605

I have been able to pair the VM-605 to my Torch but cannot seem to play audio files through my FM stereo despite it being tunes to the proper FM setting. It also seems to lose it's FM "connection" after a minute. Any assistance would be appreciated.
Thanks

Hi dortc,
Also try pressing the top left button on the VM-605 to refresh the connection while playing music. The FM frequency may lose the audio connection is there is an extended period of time in which no audio is detected.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Skype 4.4.507 on Blackberry Z30, No speakerphone during video calls

I'm trying to solve why when i make a video call in skype the only sound from the phone comes from the top internal speak and not the speakerphone, making it impossible to hear the other person unless i hold the phone to my head like a call, making video calls kinda pointless.
Does anyone have any suggestions?
I have 3 more weeks to decide if i want to keep this phone and this might be a deal breaker.

You can also use headphones actually they did that this way in order the person you are talking to not to hear his voice...

Trying to connect iphone 4s to blackberry visor hands free unit. In error told the phone to forget about this unit, how do i get it to recognize this unit?

Cannot conect iphone 4s to blackberry hands free devise VM605. Inadvertanly told the phone to disregard this devise. How do I get it back so it will recongnize it?

Check the manual. Made sure the device is in discoverable (pairing) mode. If it's not, the phone won't see it.

Blackberry visor mount speakerphone vm-605

Similar Messages

Maybe you are looking for