Blackberry wont connect to the mobile network?

my phone was working fine until it suddely wouldn't pick up a signal? i've tryed changing sim cards and i've checked with everyone on the same network if there's is working fine and it is what can i do? i've also updated my phone and restarted it multipel times. 

So on the Manage Connections screen, when you click to connect to your network, what actually happens?
On thee Manage Connections > Mobile Network screen, what is your Network Selection Mode set to? Network Technology?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

    My IPAD 3 [5.1.1 (9B206)] has a problem.
    - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
    - It can no longer connect to the mobile network orange except Wireless (WIFI)

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • My Bionic is not connecting to the mobile network

    I have had my Biaonic for almost 2 years and the last 2 days it will not connect to the mobile network.  Any ideas?

    Could be a network outage in your area.  You also could try resetting your SIM card, i.e., turn off the phone, remove the SIM card (be careful not to touch the gold contacts), wait a few minutes, then reinsert the SIM card, turn the phone back on, and allow the phone a few minutes to re-establish a network connection.

  • My mac wont connect to the wifi network but all other devices are working fine! Please can you help

    My Mac wont connect to my WiFi.  It can see the network but has an "!" over the WiFi signal. My iPhone and Surface connect fine.  My Mac was working fine yesterday.  I've restarted the rooter, the Mac and still not luck.  I've changed the WiFi channel, removed and re-added the WiFi network, but I still can't connect. Please can someone help.... thank you !

    Power Cycle
    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US

  • Podcast keeps connecting to the mobile network even when I have set up Podcast to download only from Wifi

    I hope someone can help me.
    I am really tired, fed up, with this Podcast application's behaviour. I have set up, both from the Podcats Settings and Mobile Network Settings that Podcast should NEVER use Mobile Networks for any download, it should only use WiFi.
    After doing that as soon as I open Podcast, if I check Mobile Networks configuration, or Podcast config, I see that again, by itself!!!, Mobile Networks for Podcast is ACTIVATED (even when the iPhone is connected to WiFi)
    Apple people, this is costing me money!!! And this strange (silent and from the back) behaviour, against the user settings, looks more and more like fraud (as when I apply the settings I define clearly my intentions of not downloading from the network, but your Apple's Podcast Application keep changing it against my will)
    I wish someone can help me to stop this application to revel against the user's will.

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • Blackberry z30 - not showing the mobile when connected with blackberry link

    sir ,
     first when i bought the mobile  z30 - my mobile was is good conditon ... suddenly today (15-1-2015) i couldnt type in my device password, mobile got struck ,then i connected my mobile with balckberry link and made a reset ... now the mobile is not upto themak....i dont feel it  works as before. ...now am connecting it with blackberry link with mobile the link detects my media card in mobile and gets connected  with i tbut it doesnt get connected to the mobile device...
    please provide me solution.. so that i could get my mobile to old gud condition
    waiting for the reply , thanks in advance,

    trishul22g wrote:
    sir ,
     first when i bought the mobile  z30 - my mobile was is good conditon ... suddenly today (15-1-2015) i couldnt type in my device password, mobile got struck ,then i connected my mobile with balckberry link and made a reset ... now the mobile is not upto themak....i dont feel it  works as before. ...now am connecting it with blackberry link with mobile the link detects my media card in mobile and gets connected  with i tbut it doesnt get connected to the mobile device...
    please provide me solution.. so that i could get my mobile to old gud condition
    waiting for the reply , thanks in advance,
    Sorry to respond that your post is vague.
    Did you do a reset to factory?  It takes a day or a few days for a BB10 device to finish sync'ing and indexing and so forth after a wipe or an OS reinstall or upgrade.   If performance is subpar, give it another day to see if it improves.
    On the last, I may not understand.  I believe you are saying you are connecting to the device with Link and the computer mounts  the microSD card as a drive but not the device's onboard memory.  Do you have mass storage mode enabled?   If so, disable mass storage mode and try again.
    - Ira

  • The Blackbery device simulator is not able to connect to the mobile server.

    Hi
    While login to Sap Mobile BI i get the below error.
    "unable to connect to mobile server.The request is timed out(0x008)"

    Thank You for your reply.I had no problem with the mobile network connections it is on.The issue i am facing i am using proxy server deployment where we don't have to mention host_port  in the vas cluster configuration due to which i m not able to connect to blackberry Simulator which is on client machine.But if i specify the client machine port to Host_port then i m able to connect.Can you help me to configure the Mobile server for a non-BlackBerry
    deployment that uses a proxy server

  • HT5957 Since upgrade to 7.0.2 no longer able to connect to my mobile network - sim card not recognised

    Quite simply as described above.   Upgraded to 7.0.2 this afternoon.   All was fine until I restarted phone in a place where I know mobile coverage is weak.   Since then I've been unable to connect to my mobile network, my sim card doesn't seem to be recognised by my iPhone 5 and I can't return to a previously reliable configuration because I can't switch off Find My iPhone from the device.   Help!!

    You can leave feedback for Apple at the link below regarding your displeasure with iOS 7
    http://www.apple.com/feedback/

  • My mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?

    my mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?

    192 is local address within your network.
    Unless the adddress is of a server that can reolve URL names to ip addresses you wont be able to load an external web page.
    You can check what it should be by checking your router status page.
    Or if you have an iOS device check under settings, W-Fi, select the network your attched to, then see what is next to DNS.
    DG

  • I cant set up my brand new apple iphone 4s as it wont connect to the internet help please

    I cant set up my brand new apple iphone 4s as it wont connect to the internet help please

    Hey vanessafromsouth perth,
    Thanks for using Apple Support Communities.
    It sounds like you are not able to connect to the internet. These articles should be able to help you get connected.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Have a nice day,
    Mario

  • My iphone wont connect to the internet, help me

    my iphone wont connect to the internet, help

    Try doing this:
    Settings
    General
    Reset
    Reset Network Settings
    then try reconnecting
    OR try this -----
    Clicking forget this network on the top of the Wi-Fi (click the button where it leads to more info on the Wi-Fi)
    then turn off the Wi-Fi and put it back on then it should come back up and try reconnecting

  • Itunes store wont connect to the internet?

    Itunes wont connect to the itunes store. The error message it gives me says "Itunes could not connect to the iTunes store, make sure your network is active and try again." I can use the internet fine, and all programs can connect but itunes. I have the most recent version of itunes. Also the weather widget wont update or connect to the internet. I'd greatly appreciate any help! This is stumping me and just leaves me frustrated

    Same problem here! Except--for reasons I won't go into--I use a VERY OLD version of itunes (6.0.1) and I don't ever want to update it. (I would use iTunes 4.0 if I could find it!) It's always worked fine until 11/01/2010. My Mac is a Powerbook G4 running osx 10.4 (Tiger) and I don't wish to update the os either. ADVICE>> Whatever you do, DON'T SIGN OUT OF YOUR iTunes ACCOUNT if you are still signed in. It won't let me sign back in. Of course, that means that I have lost the ability to play some 200 songs. And of the 200 or so iTunes I purchased from the iTunes store, I bought most of them with this laptop! At least on my Mac Mini, I stayed signed in so the songs still play, though I can't connect to the store with the mini either. Luckily, I backed them up to another (Windows) computer which can still connect to my account, so I will burn 10 or so CDs and re-load, re-title and load back into this laptop. Thanks a crapload Apple! I will never, ever buy anything from the itunes store again. With Amazon mp3s, CD Universe mp3s and even Walmart mp3s, you don't have to deal with this crap! Enough with this "Protected AAC" BS. If I buy a song, IT'S MINE! Not just on 5 computers (I have 5 desktops and 2 laptops--and that's just at home!) I'd rather rip from cd, vinyl and reel tapes than deal with all this! Crap and BS wasn't my first choice of words either!

  • My I-Touch Wont Connect To The Internet ! But My Bro's Did ! Help Please

    I just bought this friggin thing a few hours ago, cause my idiot brother talked me into getting it. He successfully connected his to the internet. I just paid $230.00 for an 8gb Ipod-touch, and a warranty, and it wont connect to the internet. I put in my network, and the password, but it's not going through. But my brothers works fine. Anybody know what i can do ?

    Yeah, they took down the post cause im not supposed to talk about it apparently. That was my brothers. His is working fine, he can go online, and do things, but for some reason i cant go on youtube, or safari, and cant connect to my main connection.
    I was thinking, maybe since there is two I-Touch's, maybe only one can be connected, but im not to sure about that.

  • How to switch the mobile network in program?

    Peace upon you ,
    I searched in the forum but didn't get the answer.
    Currently I have 2 mobile networks for my mobile say they are A and B.
    Is there a way to automatically detect the mobile networks if there are A and B then choose A?
    Or just simplely choose A no matter whether there is B availible?
    I want to search for gsm networks operators available and select the preferred one
    Thanks.

    There are no BlackBerry APIs that would allow you to do this.  I'm moving this to the general BlackBerry handheld forum for other possible configuration suggestions.
    Mark Sohm
    BlackBerry Development Advisor
    Please refrain from posting new questions in solved threads.
    Problem solved? Click the Accept As Solution button.
    Found a bug? Report it using Issue Tracker

  • HT1212 but my ipad wont connect to the computer ! :(

    but my ipad wont connect to the computer !

    Is the iPad not being recognized by your computer/iTunes?
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

Maybe you are looking for

  • Installed new iPod + iTunes, closed iTunes and can't open it

    I was running on 10.3.8, and QT 6.5.2 and iTunes 4.6. Installed to 10.3.9, QT 7.0, and ran the iPod installer, and installed QT 7.0.3, everything seemed to work fine. My iTunes updated and I pulled my music over to the iPod, then I ejected the ipod,

  • Multi Acquisitio​n bis

    I am  working with  PCI-6601 from 4 channels: I try to generate two signals them and to acquire of a third signal (moreover trigger with one of the two signals generates them to you), but  a problem has been placed : it gives always an error to me of

  • After latest update shortcuts load with an error message

    i get an error message saying it cant find the address but it still loads,but i have to click on the error message to get rid of it. please help...and thanks in advance.

  • INTERSECT funcation in MDX not working with if we INTERSECT Parent SET and lower leval Set

    Hi All, INTERSECT funcation is not working if i filter Parent attribute and simple attribute ex. SET a as INTERSECT( [DimCustomerBuyer].[ParentProvince].[ParentProvince],[DimCustomerBuyer].[Province].[Province]) Query (99, 1) Members, tuples or sets

  • Distorted video-format in presentation

    Hi! I'm making a presentation which consists of both photos and videos. The videos are cut in Premiere Elements and exported in DV-PAL format (16:9). When the videos are played in Elements or other media players they look allright, but when they are