Blackberry wont do anything after restarted

Blackberry froze so I restarted it however when it came back on, the screen lit up like normal but there was no signal and the tracker wont move. Nothing happens when I press any of the buttons, even when I try to turn it off, I have tried resetting it again however the same thing just happens again

Hi and Welcome to the Forums!
I can't quite tell, but are you doing a full and proper battery pop reboot? Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • HELP, superdrive wont recognize anything after a forced shutdown!?

    I was watching a dvd, and it froze up about 25 minutes in and the little rainbow wheel was up for about 10 minutes and I was in full screen so I couldnt do anything. So, I held in the button and forced it to shut off (with the dvd in). Now after that I started it back up only to find it wouldnt recognize the dvd, and just spat it back out after about 5 seconds or so (I couldn't hear it reading anything at all). I tried multiple times, 2 other dvds and a music cd, it won't read anything anymore...and I just burned a cd earlier today and everything was working fine....Can someone please help?? Is there a disk reset or anything??? Any help is greatly appreciated!

    bump

  • Photos Wont Open Even After Restart

    Every time I open up Photos it says "Unexpected error occurred please quit and restart the application." I click the quit button which quits the program and when I reopen it, the same message comes back up. I have shut down my computer, restarted my computer, messed with my router and wifi, nothing is working. Any tips?

    What version do you actuall have?

  • Creative cloud manager wont loadup anything after install

    Mac, OS X Mavericks 10.9.3
    Just downloaded and installed CC manager and it will not load any of the tabs in the manager. It just spins a blue indicator and never resolves. It doesn't even give options for preferences, just help, open in window, and quit. When I quit the icon leaves the top menu bar but if I pull up the activity monitor CC manager is not responding and requires a force quit.
    It's like it never finishes really initializing.
    I have tried uninstalling cc and reinstalling to no sucess.
    Any thoughts?

    Additionally you may try the below mentioned steps:
    1. Navigate to Applications/Utilities/Adobe Installers and uninstall CC desktop.
    2. Navigate to Applications/Utilities and trash Adobe Application Manager and Adobe Creative Cloud folder.
    3. Navigate to Library/Application Support/Adobe/OOBE and rename it to OOBE.old
    4. Navigate to ~/Library/Application Support/Adobe/OOBE and trash it. (Access hidden user library files | Mac OS 10.7 and later).
    Install CC desktop and try to sign in. If still the same error then please try launching in root account: OS X Mavericks: Enable and disable the root user.
    Refer the article: Troubleshoot download and install issues in case of further issues.
    Regards,
    Romit Sinha

  • Password wont do anything on installer for CS5 (MAC)

    When I try installing CS5 to my mac it wont do anything after I input my administrator password. I click the installer, put in my serial number, but once I get to the " Setup wants to make changes. Type your password to allow this." It does nothing but dissapear and come back asking for my password again. I’m entering the correct password and I’m using the admin account. I tried doing an incorrect password and the setup box shakes (saying wrong password), but when I put my correct one in it just goes away and comes right back.
    Tried doing a trail and the same thing happens.
    I honestly cant think why its doing it.
    I have been searching online and only found one post relating to the same subject matter.
    http://www.makeuseof.com/answers/password-authentication-fail-installing-app-mac/
    ""I’m getting this problem as well, I first noticed it when I tried to update Adobe Flash. The password is correct because if I type an incorrect password the box jiggles in the usual fashion to show its wrong, yet when I type in my correct password theres no movement, the box just disappears and I’m left with the original installer box asking if I want to install/cancel.""
      Model Identifier:          MacBook4,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      10.7.5 Lion
      4g ram
    Thanks in advance

    Please try not only enabling the root user account but logging in as the root user.  When you reboot you should have a, "Other," option.  You will want to select this and type the user name as Root and then whatever password you specified.  You can then try the installation again in the Root user account.

  • After i updated to IOS 8 my ipad wont download anything

    After updating my ipad to IOS 8 my ipad wont download anything like apps, music,ibooks,app updates,etc. I do have a strong wifi connection, but when i click download, the item gets stuck preparing to download, and doesnt even get to asking for my apple ID password. Help?

    I had the same problem, and I read on other apple blogs it is the WSJ app.  After deleting the app, everything worked for me, so I think it is right.
    Delete WSJ app.
    Close out all apps (swipe up).
    Shut down Ipad by pressing and holding restart button.
    wait 15 seconds.  Restart ipad.
    Everything should work
    With all the other people who have been having this problem and solved it by deleting the WSJ app, cant believe Apple hasn't blocked their app (it prevented all my podcasts, newsstand, and other apps from updating!!!)

  • Re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service

    re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service, I was able to retrieve all of my photos so the device is functional on that level. have restarted several times & also have restored data from i tunes. it said my phone is damaged.

    Jailbreaking
    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
      Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • My ipod wont turn on. before it was stuck on the apple logo so i restarted it like 5 times in less than a minute and now it just WONT do anything.

    before it was stuck on the apple logo so i restarted it like 5 times in less than a minute and now it just WONT do anything.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Hi ive just reset my iphone 4s as i was planning to sell it on and after the normal stuff you see on a reset ive been left with a phone the just has the apple logo on the screen and it appears tpo be frozen and wont do anything?? any ideas?

    Hi
    I've just reset my iPhone 4s as I was planning to sell it on. After the normal stuff you see on a reset I've been left with a phone that just has the apple logo on the black screen and it appears to be frozen and wont do anything?? any ideas?
    I've tried holding down top button and round button which makes it go off but as soon as you push top button again it comes back and again its frozen.
    Thanks for any ideas in advance?

    You need to put your iPhone into recovery mode to restore it: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Help! My iPhone 5 wont turn on after battery died. iPhone is not reponding to charger or anything I have tried...

    Help! My iPhone 5 wont turn on after battery died. iPhone is not reponding to charger or anything I have tried... Hard reset is not in option beacuse iPhone is turned off.

    Your only chance is letting it charge for about 10min, then connecting it in recovery mode, explained here:
    http://support.apple.com/kb/HT1808
    If it does not charge at all, you'll have to get it serviced by Apple.

  • Issue on IPhone 4. All App Updates or New Install that I have tried to update go under the waiting mode and wont do anything

    I'm having an issue with downloading and updating apps on my iphone 4. It did not start immediately after updating to iOS 5.1. Just started a couple of days back and is driving me nuts. Any apps that I have tried to update or install new apps will go under the waiting mode and wont do anything. I've tried to delete some of them and re-installed but like the others have mentioned in other post the app installation again goes under waiting and nothing happens.
    I've checked my settings and I've tried several restarts on the phone but still no good.
    Any suggestions???

    Try this support document http://support.apple.com/kb/HT1808. You may have to do it more than once.

  • HT1212 my ipod is frozen and wont do anything!!! what do i do????

    my ipod is frozen and wont do anything!!!!!! i need help on restarting it. it is stuck on my lock screen

    If still problem try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Update lion after restart white screen, no logo

    I have a 2 weeks old:
    MacBook Pro 15", Intel Core i7 Quad 2.2 GHz
    Yesterday i tried to update Lion with the update apple released that day. It downloaded the update and it asked me to restart the computer. After hitting the restartbutton my screen turned white. The only thing left was the mouse arrow.
    I waited at least an hour but nothing happend. I tried to restart my computer pressing the on/off button. It tried to restart but got stuck at the startupscreen with the apple logo. Today i had to reboot my computer and installed lion again. Finally i got back on my desktop. But the software update still asked me to instal the new macosx. So i tried again. And now i have this white screen again.
    What can i do to fix this?

    i called apple today and i got this problem fixed
    I was not able to restart my computer so I had to hold down the alt key when i turned on my computer. Than these 2 harddrives appeard and i had to choose "recovery harddrive"
    In the next step i could choose in a menu to reinstall os lion. So i did.. That took almost 2 hours.
    Ik finally got back in my computer.
    In the menu "system updates" i still got the announcement of a new Mac OSX update. But also 4 other updates.
    • lion recovery update
    • update remote desktop
    • itunes
    • something with raw files
    The lady on the phone told me to seperately install these updates and that did the trick.
    There seemed to be a conflict between those updates. I dont know why. But she told me that i had to install the small updates first and the recovery update as 4th and as last the mac osx update.
    So maybe if you reboot your computer with the alt key and try to install lion again, and than install the updates seperately it will work. And the most important thing.. Your files will still be on your computer. You wont lose anything by doing this.

  • TS1363 I'm trying to update to newest software, but during proccess, an error accured, now the iphone 4s wont do anything, it only shows plug into itunes. when i do, the device is not recognized by windows or itunes. any ideas?

    im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • ITunes RADIO is not working.  "iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again." Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so -  iTu

    iTunes RADIO is not working.
    “iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
    iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
    Simply put, firstly, I can't connect to the internet when I click on Radio.  People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
    Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
    Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
    Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
    Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
    Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
    Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
    ===============================================================
    NOTE:  no password for iTunes exists in my Keychain. Is this a problem?
    Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
    Apple store id It works via direct internet connetion but not through iTunes.  Very strange.
    ===============================================================
    FYI, Hardware Overview:
      Model Name:                       MacBook Pro
      Model Identifier:                 MacBookPro8,2
      Processor Name:               Intel Core i7
      Processor Speed:               2 GHz
      Number of Processors:    1
      Total Number of Cores:    4
      L2 Cache (per Core):         256 KB
      L3 Cache:                            6 MB
      Memory:                              16 GB
      Boot ROM Version:            MBP81.0047.B27
      SMC Version (system):      1.69f4
      Serial Number (system):   C0*******F8V
      Sudden Motion Sensor:
      State:   Disabled
    Intel 6 Series Chipset:
      Vendor: Intel
      Product:            6 Series Chipset
      Link Speed:       6 Gigabit
      Negotiated Link Speed:           6 Gigabit
      Description:      AHCI Version 1.30 Supported
    M4-CT512M4SSD2:
      Capacity:           512.11 GB (512,110,190,592 bytes)
      Model: M4-CT512M4SSD2                         
      Revision:           040H   
      Serial Number: 0000000012330912E75A
      Native Command Queuing:    Yes
      Queue Depth:   32
      Removable Media:        No
      Detachable Drive:        No
      BSD Name:         disk0
      Medium Type:      Solid State
      TRIM Support:     Yes
      Partition Map Type:     GPT (GUID Partition Table)
      S.M.A.R.T. status:         Verified
      Volumes:
    disk0s1:
      Capacity:           209.7 MB (209,715,200 bytes)
      BSD Name:         disk0s1
      Content:            EFI
    disk0s2:
      Capacity:           511.25 GB (511,250,432,000 bytes)
      BSD Name:         disk0s2
      Content:            Apple_CoreStorage
    Recovery HD:
      Capacity:           650 MB (650,002,432 bytes)
      BSD Name:         disk0s3
      Content:            Apple_Boot
      Volume UUID:   600737FB-7A29-3BAE-859E-CBFE2E90C39A
    <Edited by Host>

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

Maybe you are looking for

  • How do I get a case to run only once

    I am using an e-series DAQ board to bring a pwm signal, then I use labview to use that signal to pick one of three cases. depending on the case picked a finite pulse stream is sent out. Currently the finite pulse vi keeps repeating because the the pr

  • Correspondence Type for F.27 with ADOBE form.

    Hi All, I am stuck into one issue. See the below details: Requirement: I want to create a new correspondence type with new PDF form which can be attached to F.27. What I did so far: I have created a new ADOBE form to fulfill the PDF requirement and c

  • Is there a way to mute audio when capturing video?

    I have the FCPX installed and want to background capture video without listening to the audio.  There was a small preview checkbox with the audio meteres in FCP 7.  Is there a similar option in FCPX?

  • My 4s shut off and I can't get it started

    how can I get my 4s to turn on?

  • How to set one default "reply-to" email address for multiple accounts

    I have an iPhone 3GS. I have my own domain name which I want to use as my primary "public" email address. It is forwarded from the hosting ISP to my ATT/Yahoo email address. I also have a Gmail account. I would like recipients to see that it comes fr