Blackberry Wont Turn On Light Blinks Twice

i was updating my blackberry connected to the computer and it disconnected by mistake and now this is a red light blinking twice on my blackberry. when i try connecting it back to the computer it says it doesnt reconize the device plugged up. Please Help !!!!

help me also because i was also victimed by the software.help me to on it.plsss

Similar Messages

  • IMac powers up fine.  Wireless keyboard and tracking pad not recognized. Power lights blink twice, repeatedly. Any ideas?

    My iMac was off during a recent thunderstorm. When I power up the computer all is fine.  However the wireless keyboard and track pad are not recognized by the computer.  Their power lights blink twice, go off, then blink again. Any suggestions?

    Turned out that I had to disconnct the keyboard from the new iMac in order to show in the old iMac.

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • Q10 Red Light blink twice, Mac wont detect

    I tried to do a reload by connecting my phone to bb link, but I end up getting a message that says repair not successful.
    I have a black screen and a red light that blinks twice.  Is there anything that can be done to my phone up and running again?

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs. If not, then please increase the wait time in step 4 to 2 hours, and possibly 4-5.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry wont turn on.

    I have a blackberry. it died and i tried to turn it on and it wouldnt turn on. ive treid taking out the battery and have tried charging it for a few hours, still wont turn on. when i have it plugged into charger the LED red light comes on as well the flashlight(camera flash). A few times it wanted to turn on and start loading then go back to the black screen and lights on. PLEASE help me..

    Hi Mmariana20 and welcome to the BlackBerry Support Community Forums!
    Did you get your BlackBerry® smartphone wet while you were at the beach? Was it working before you went to the beach?
    I would also suggest plugging your device into the wall charger, removing and re-inserting the battery then holding down the end call button.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Caps Lock Light Blinking Twice

    hi everyone, 
    I have a hp Pavilion dm4-3011Tx with beats which is about 7 months old. Yesterday I woke it up from sleep and the keyboard lit up and the caps lock light would blink twice every few seconds. I held the power button down and rebooted it and when it started up the fans were running and the light was still blinking. I tried a hard reset and everything and several hours later it started again randomly...A short while later it happened again and this time I was unable to fix the problem. I have already read that it a Bios corruption but I don't know what that means. Can anyone help? Thanks. I have already tried doing a hard reset, taking the battery and the plug out, pressing the windows key and b while turning it on. Any help would be appreciated. 
    Thanks.

    This is for anyone who reads this forum in the future. A corrupt bios fix can be simple or a pain in the butt so stay calm and patient. I've read forum after forum and had any luck with any of the suggestions people have come up with. One way(the easy way) is to power down if you havent already. Remove the battery, and charger if plugged in. Then hold the power button for 30sec, this drain the laptop of any excess life in the computer. Once done, place the battery back in its designated place, and connect charger again if needed. I've heard this has fixed some peoples issues. If you're having my luck, it will be a little harder to fix. Nothing I read helped at all, so i had to rely on my own smarts. Now I'm saying this will work for anyone, but it did for me, so you can try, but im not responsible for any problems you may cause or come across because of it. This should only be done by someone with some computer know-how. What i did was remove the bottom cover of the laptop so i could get to the motherboard and other components. (Make sure power source is removed) This will take time, so be patient and be careful. You dont want stress any cables or circuitry inside the computer. Once you remove the cover, look for a small circular li-ion battery, this is called the CMOS Battery. This is the battery that powers your motherboard while the laptop itself is powered down. So while one would think that having your laptop off for long periods of time is fine, youre actually using up energy stored inside that small battery. Once you locate the CMOS Battery, remove it from the motherboard, remember to be careful though. Now wait about 30sec, thats what i did at least. Once time has passed, put the battery back in its place. After that re-place the the cover and anything else you may have removed. Once done, re-place the battery and/or charger and power on. This is what worked for me, it may or may not work for you, but let me know if it helped or if you have any other questions. Good luck everyone!
    -B
    QAZB wrote:
    hi everyone, 
    I have a hp Pavilion dm4-3011Tx with beats which is about 7 months old. Yesterday I woke it up from sleep and the keyboard lit up and the caps lock light would blink twice every few seconds. I held the power button down and rebooted it and when it started up the fans were running and the light was still blinking. I tried a hard reset and everything and several hours later it started again randomly...A short while later it happened again and this time I was unable to fix the problem. I have already read that it a Bios corruption but I don't know what that means. Can anyone help? Thanks. I have already tried doing a hard reset, taking the battery and the plug out, pressing the windows key and b while turning it on. Any help would be appreciated. 
    Thanks.

  • My blackberry wont turn on, URGENT

    i went to reboot my blackberry but now it will only load 2/3 of the way across the loading bar and not turn on, ive charged it up for an hour and ive been rebooting it for 3 hours but it still only gets to the same point thats 2/3 of the way across the loading bar! i have important business coleagues that i need to get in touch with but i cant as my phone wont turn on, please help

    Looks like you will have to reload your device software then.
    Head to http://us.blackberry.com/support/installpc.jsp
    and perform the three steps.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Pearl Flip wont load - Red LED blinks twice, nothing on screen

    My Pearl Flip refuses to load, and the only activity it shows is the red LED blinking twice every few seconds. I have tried the following
    -tried reinstalling the two most recent versions of the OS using the Blackberry Desktop Software, but the installation hangs at the point of loading the system software
    -tried using the application loader, however the installation hangs at loading the system software
    -tried to use JL_Cmdr to wipe the device. As far as I can tell it did not wipe it (although it doesn't really provide any errors either)
    EDIT: Should also say Ive tried all the above from multiple computers and using Win7 and XP
    What other methods can I try to restore this device? I appreciate any suggestions that might be out there.
    Thanks!
    Scribs

    Hey Scribs,
    Welcome to the forums!
    Have a look at this article for help reloading the software using loader.exe http://bbry.lv/9fsGPK If this method does not work you can try doing a reset to factory using the switch found in this article http://bbry.lv/dpNb1j
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • 8320 red light blinks twice then wont turn on

    I tried to do a data backup and software update but it quit right in the middle now my phone wont even turn on please help my husband is going to kill me

    Remove the device battery, wait a minute and turn the battery back.
    Does it help ?

  • My blackberry wont turn on, the red light just flashes for about 10 seconds!?

    My battery went too low for radio use last night, so i put it on charge when i got home. My charger is broken so it needs to be in a certain position to charge. I charged it throughout the whole night and when i woke up this morning it wont switch on. The red light just comes on for about 10 seconds. I have tried to different chargers one that does work aswel. PLEASE HELP.

    maybe the charging port is broken? check inside it and see if it looks any different

  • Blackberry curve 9220 screen light blinks

    i was just typing a msg and suddenly screen turns out to white,then after few seconds it started blinking. I dont know what hapens. Sometimes it works fine. but sometimes not.
    i had tried
    1. Wiping data
    2. battery pull

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Dv4-1222nr won't turn on lights blinking and hard disk light doesn't come on

    My dv4-1222nr was working fine last night but this morning is something different.  I turned it on and received a blank screen with caps and scroll lights and dvdr blinking and a funny sound as if the dvdr was trying to come on.  I have taken out the battery, removed and put back the ram, and plugged in the ac cord without the battery too.  sadly nothing has worked does anyone know what causes this problem and is there a way to fix it?  I hope its not the hard drive that has to be replaced  i didn't back up any of my stuff. Now something freaky just happened.  As I'm typing this the laptop turned on by itself with the caps lock and scroll still blinking please help....

    Hello, I'm having similar issues with my Hp pavillion DV7. I've always had to have the cord plugged in for the longest, and just recently would have to rig the cord into specific positions or else the LED light would remain off. My Laptop  would randomly turn off, so I assumed It was the cord. I tried to fix the inside of the charging outlet inside the computer, but now the light won't turn on at all. I removed the battery and It hasn't made a difference, I'm scared to press the hidden button because I don't know if it would wipe my hard drive or not, and I don't have any money yet... Also my DVD drive doesn't always work either. I bought this Laptop in 2008-09 as you may have guessed I cannot afford a new one, I have many issues but I can't have It checked since my mother's car broke down. If I need replacments I would appreciate prices since I'm only a teenager... I have several problems with the laptop and I'm desperately in need of a quick fix. (I'm running behind on a scedule that requires to be complete before 2014) My computer runs super slow and freezes, shuts down, crashes and is used by all 4 of our family members I CANNOT wipe the hard drive, and I need professional Help!

  • My blackberry wont turn on HELP ME PLEASE!

    I tired to update my blackberry but then it said the device could not be recognised so i then took out the usb and now it just won't turn on but it just flashes red some one help me PLEASE!!!! 

    malcolmrmc wrote:
    How do i reboot my blackberry storm??
    Exactly as JSanders described for you above.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT200154 My apple tv is frozen sits on main page light blinks twice fast trying to use remote but will not change just goes to sleep or picture mode untill i unplg it then the same all over

    My apple tv just froze or hung , it was working then nothing, only way to power it up is to unplug then plug it in , but staays on the main screen frozen, if i try to use the remote it just flashes 2 x fast and does nothing, i assume its connected or i would not see my itunes etc

    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • 8500 PHONE WONT TURN ON!!!!

    Hello, my phone wont turn on the red light blinks twice every few seconds, my mac doesnt recognize that its pluged into it help!!!
    -Bbogie

    Hello bbogie,
    Remove the battery from your BlackBerry and connect it to your Mac. The connection can take up to 30 minutes to establish.
    If that fails, you can use a windows computer to try and reload the software as shown in KB10144
    You and download the Windows version of BlackBerry Desktop Manager as well as the software for your BlackBerry from your carrier's download site here.
    Let me know how you make out.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • Windows Vista Ultimate Password

    I have a HP Pavillion Vista Ultimate, Windows. I finally got past the admistrative code,,....and now I am tring to sign in to Windows and the programs I have on my laptop,...unforunately I, apparently keep putting the wrong password in. Once I finall

  • How do i change a pdf document into a word document?

    How do I change a pdf document into a word document?

  • Issue with viewing packages in SQL Developer EA2

    I posted a message when EA1 came out asking why I couldn't see the package's body in EA1. Now I couldn't see the any thing under '$schema/packages' in EA2. Does anybody know why? My OS: Windows XP Pro SP2 Oracle: 9i SQL Developer version: EA2

  • How to recover photos, video and notes from iphone 3G?

    Hi I just tried to back up my iphone from the last couple of weeks and it crashed while syncing and now says I need to restore factory settings.  When connected by USB to my MacBook Pro it says "iTunes has detected an iPhone in recovery mode. You mus

  • Problem using CS5

    I recently uninstalled CS3 before deactivating.  I installed CS5 but I keep getting error #1.  I used the cleaner tool also but to no avail.  Any advioce would be helpful. hanks