BlackBerry Z10 Native Browser not supporting to Phonegap Application

Hi,
i have PhoneGap app which is working in android and iphone platfrom. but when i check this app with blackberry Z10, pages are flickering from one page to another page, full screen page will load properly and blink ones,
so i am not getting is it a coding issuse....? or else the blackberry Z10 native web kit (Browser) not supporting, becuse the app is working fine in other BlackBerry smart phones.
Please let me know why its happening only with blackberry Z10.
thanks in advance
Umesh lakka

You're right!
I tried the link in my phone ...but it didn't work however its working with Opera Mini. I will verify the issue and will let you know.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

View Wiki and Webcal on iPhone - Browser not supported

As the title suggests, I would like to use the wiki and webcal on an iphone. Ideally, I would like to turn off the browser tests the server does so it just serves the page to an iphone just as it would to any other window.
FWIW, in an android phone, the wiki services give a "browser not supported notice" but still serves the page like a regular page, and it works fine.
I have many users, so a server side change would be better than trying to get all of my users to use an emulated browser.

What do you mean by "When I do a search on my browser, I get a message that it is not supported and the message suggests to use FIREFOX"?
Where are you searching?
You're right, FireFox cannot be used, but your 8520 browser can emulate FF.
Tell me more.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Native signing not supported on mac!!

To sign both the installer and its executable we're using Thawte and Comodo certificates. For MacOS we've Thawte and Apple. This following command builds a proper signed installer version (along with its executable .exe) with the combination of both the certificates, in Windows:
adt -package -storetype pkcs12 -keystore myCert.pfx -target native -storetype pkcs12 -keystore myCert.pfx myApp.exe myApp.airi
(http://help.adobe.com/en_US/air/build/WS789ea67d3e73a8b22388411123785d839c-8000.html)
When running the same command to compile a .dmg file - ADT reported an error:
Native signing not supported on mac
I'm not sure if the adt doesn't has the ability to do such process in MacOS unlike Windows! Any idea?

Hello Ken,
Thanks for commenting. But that 'solution' already tested and its found not true with recent AIR SDK version.
If you do this:
adt -package -storetype pkcs12 -keystore myCert.pfx -storetype pkcs12 -keystore myCert.pfx myApp.exe myApp.airi -target native
You'll have compiler error:
"-storetype already specified", and you can see why in the command
If you do this:
adt -package -storetype pkcs12 -keystore myCert.pfx native -storetype pkcs12 -keystore myCert.pfx myApp.exe myApp.airi -target
You'll again have compiler error:
"not enough argument"
I don't think this have a fix yet.
I lodged a bug at: https://bugbase.adobe.com/index.cfm?event=bug&id=3655573

Native VM not supported error when start WebLogic Server on Solaris

I created a weblogic domain and server using configuration wizard from workshop 8.1, the JVM is jdk142_05. When I start weblogic server, get follwing error: native VM not supported. The enviroment is
Solaris.
We used the same jdk started medrec example without problem. Any idea for the possible cause?
Thank any one who can help.
Zhong
uberpeer% ./startWebLogic.sh
JAVA Memory arguments: -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=:/rg2/opt/bea/weblogic81/server/lib/weblogic_knex_patch.jar:/rg2/opt/bea/weblogic81/common/lib/log4j.jar:/rg2/opt/bea/weblogic81/server/lib/debugging.jar:/rg2/opt/bea/weblogic81/server/lib/knex.jar:/rg2/opt/bea/weblogic81/javelin/lib/javelin.jar:/rg2/opt/bea/weblogic81/server/lib/wlw-lang.jar:/rg2/opt/bea/jdk142_05/lib/tools.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic_sp.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic.jar:/rg2/opt/bea/weblogic81/server/lib/ant/ant.jar:/rg2/opt/bea/jdk142_05/jre/lib/rt.jar:::/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient+ssl.jar:/rg2/opt/bea/weblogic81/server/lib/xbean.jar:/rg2/opt/bea/weblogic81/server/lib/wlxbean.jar:/rg2/opt/bea/weblogic81/server/lib/xqrl.jar:/rg2/opt/bea/weblogic81/server/lib/netui/netui-compiler.jar:/rg2/opt/bea/weblogic81/server/lib/wli.jar:/rg2/opt/bea/weblogic81/server/lib/fop.jar:/rg2/opt/bea/weblogic81/integration/adapters/sample/lib/sample-eis.jar:
PATH=/rg2/opt/bea/weblogic81/server/bin:/rg2/opt/bea/jdk142_05/jre/bin:/rg2/opt/bea/jdk142_05/bin:/opt/bea/weblogic700/server/lib/solaris:/opt/bea/jdk131_03/jre/bin:/opt/bea/jdk131_03/bin:/rg1/users/zhongw/weblogic/PMDomain:/rg2/opt/bea/weblogic81/workshop:/rg1/users/zhongw/bin:/bin:/usr/bin:/usr/sbin:/usr/java/bin:/usr/openwin/bin:/opt/local/bin:/usr/ccs/bin:/usr/per15/bin:/usr/local/SUNWspro/bin:/usr/local/accurev/bin:/opt/jakarta-ant/bin:/usr/local/accurev/bin:/usr/ccs/bin:/usr/local/bin:/opt/enJin/2.3.1/bin:/usr/java/bin:/usr/openwin/bin:/usr/dt/bin:/rg1/users/zhongw/Borland/JBuilder2005/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
/rg2/opt/bea/jdk142_05/bin/java -client -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -native -Xverify:none -da -Dplatform.home=/rg2/opt/bea/weblogic81 -Dwls.home=/rg2/opt/bea/weblogic81/server -Dwli.home=/rg2/opt/bea/weblogic81/integration -Dlog4j.configuration=file:/rg2/opt/bea/weblogic81/common/lib/workshopLogCfg.xml -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ignoreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=/rg2/opt/bea/weblogic81/server/lib/weblogic.policy weblogic.Server
Error: native VM not supported
Stopping Pointbase server...
Pointbase server stopped.

I believe this is the error you get when you try to start up a JVM with the commandline option '-native'.
Remove this flag from your startup script and retry.
By the way, it may be that you have the environment variable 'JAVA_OPTIONS' set to '-native' in which case:
(first confirm this is the case)
$ echo $JAVA_OPTIONS
-native
(Then edit the startup script if you get the result above)
add in a line:
# To remove '-native' flag
unset JAVA_OPTIONS
and retry.
I have to confess I don't know what the '-native' flag is actually supposed to do, but my JVM also reports back that this is unsupported.

How do I upgrade my browser? It is apparently outdated and not supported by many applications.

How do I upgrade my browser for MacBook Pro, Safari 5? It is apparently outdated and not supported by many applications.

You need to either upgrade the computer’s OS(this isn't possible on a Core Duo Mac) or switch browsers.
(117225)

I8.0 Browser Not Supported

Is it possible to catch exception (rather than system dump 'Sorry program/browser not supported" )gracefully when incompatible browser [for e.g IE 8.0] is used for calling Web Dynpro ABAP application?
thanks,
Sanketh

I don't believe that this can be caught becuase the error is thrown very early in the framework startup and your particular application hasn't even been started yet.
You can build custom error messages and attach them to the SICF node, but this isn't going to let you by pass the error.
The offical SAP response (from note 1294877) is that you can use the IE8 blocker toolkit provided by Microsoft to keep users from installing IE8.
Even if you could bypass the error or change the client string identification; IE8 isn't supported and you could run into problems and inconsistencies in the rendering.

Error: native VM not supported

Hi
I have just run the blackbox application in the javacomms API download:
1) I invoked it using the prescribed command java -native blackbox to which I got the error native VM not supported.
2) I then ran it again without the -native switch and got the error Exception in thread "main" java.lang.NoClassDefFoundError: blackbox.
Can anyone help please? Is there something I have not installed correctly? I am using Windows XP professional service pack 1.
Thanks
Chris Wilson

java.lang.NoClassDefFoundErrorThat always means that either your classpath is wrong or that isn't the name of the class.

Netflix & Amazon-Mac & Browser Not Supported Issues

Hello! I am having issues with both Netflix and Amazon's "Search Inside" with my MacBook Pro. I have all the lastest OS (10.7.2), browsers (Safari, Firefox, Chrome) and according to their (Netflix and Amazon) requirements everything is fine. I even have Silverlight (which I couldn't download from Microsoft because it kept saying "browser not supported.").
It can't be a coincidence that I am having the same exact issue on all three browsers on these two sites.
What could the connection possibly be? I am absolutely stumped!
Thanks for the help!

Hi there, I meant that I was getting similar issues with both Netflix AND Amazon...separately.
That said, I figured it out. It was my virus protection. Apparently Netflix and Amazon's "Look Inside" don't like it. I should have figured out that the virus protection s/w was the issue. Netflix suggested it and they were correct.
Yeah, yeah, I know... Macs don't need virus protection. After some of the security issues that have been going on, I say 'better safe, than sorry." ;-)
Thanks for the response and help!

Smart wi-fi browser not supported error by Linksys

Linksys seems to have created a doozy of an issue with this "browser not supported error" they keep displaying. Its as if head office is oblivious to this.
I am running IE 11 with all the updates applied and it gives the error. I downloaded firefox and it gives the same error. I downloaded Maxthon cloud browser most recent version and it does not work except when you log in with your cloud browser ID.
I have the latest version of Java 51 and cookies are enabled.
The strange thing about the Maxthon experience was when I logged out it continued to work. but when I went to another page and came back it stopped working.
There is something screwy in the linksys firmware here. they should have a bypass for this not so smart thing. Its really not worth the aggravation. Can anyone pinpoint where the issue is with this thing please?

Have you tried this?
-start with a turned off/powered down router
-turn on your PC and clear your browser cache with the router OFF
-prior to powering up the router... remove the WAN internet cable connecting the router to the cable modem or DSL unit.
-power on the router
-navigate to the correct ip address (probably 192.168.1.1 if there were no other routers in your network)
-now attempt to log in using the ACCESS ROUTER panel
-from now on it- local login should display as the main log in window with the smart wifi option in a panel below instead of the reverse which was the factory default.
-reconnect your wan cable and use as always.
-now the expectation is that you will always be able to log in through the ACCESS ROUTER panel locally.
Let me know if it works for you.

Microsoft Adcenter says browser not supported

Microsoft Adcenter says browser not supported and tells me to enable cookies and java yet these are enabled

Hello Siborg.
Can you provide me with a link for this site? You may need to contact Microsoft about this, though.
Or you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Saying "browser not supported" - what to do?

Saying "browser not supported" - what to do?

A couple of options:
Turn on the Developer menu. You can do this with a tool like iTweax 2.3 and try changing the user agent.
Download and use Firefox instead.

RDWEB IE11 Browser not supported

I have 2008R2 with RDS. I have a couple Apps on it, and almost everything is fine, except that IE11 users are getting this error:
Browser Not Supported
This Web browser is not supported by RD Web Access. RD Web Access requires Internet "Explorer 6.0 or later.
You can download the latest version of Internet Explorer from the
Windows Update Web site. "
IE 11 is certainly later than 6.0.
I am not seeing anything in the forums, is there a work-around on either the server or client side?
Thx!

Well, I think around Y2K, this would have been at the top of everyone's mind. Because now, in 2014 this is essentially the same kind of problem. Gollygosh, we never thought IE would go past 9.....
(I am kind of surprised it did too... however fairly certain V.11 will be the death of IE. Unfortunately, most users want to be the race car driver, not the mechanic so fussing with the 'strings' ain't gonna happen, the will just load Chrome or Firefox
and it will just work.
"Its an easy fix with changing the string function. When this was written I dont think anyone thought IE would be > then 10 any time soon."

Xtreme Gamer is "not Supported by the Application" Problem. He

My SoundBlaster XFi Xtreme Gamer has suddenly stopping being detected by my creative software, such as Volume Panel. The drivers are installed, and when I hover my mouse pointer over the volume panel is still shows "SB X-Fi Audo [E000]" which is the sound card, but when I doubled click to open the volume panel it says that "The current selected audio device is not supported by the application. Do you want to select another audio device now?". When I click "Yes", it doesn't show anything on list besides "Windows Default Audio". This happened out of no wheres, with no changes at all to my computer. Volume Panel was working yesterday, but when I woke up today it wasn't. I have no idea what could be causing this, or what caused it... I did update the drivers about a week ago, but it was all working fine since, until today.
I haven't installed or uninstalled anything since it was working properly.
I tried reinstalling drivers and software, and it did not fix anything. I also uninstalled everything including drivers from computer, and used my original installation CD to install everything over again. Every installed fine, but then for some reason it would not install the drivers. Windows was detecting the device, but when I went to install the hardware manually, it would ask for CD to find some files to install... it said this twice, I located the files it needed, and each time it would complete the process it would instantly reboot computer without notice. When the computer was booted up, it would ask then ask again for the Creative CD to install the detected hardware. So I for awhile I could not install the drivers, but for some reason out of no wheres it finally installed when I used the update installation file I downloaded from Creative.com, even though I had tried the same thing a few times, it for some reason installed drivers. But now it is all installed again, my software seems imcomplete and will still not work with the sound device. What seems to be the problem here? Only thing I can think of now is the installation for some reason became corrupted. Only way I can think of fixing it is reformatting my whole computer, but as of right now I don't feel like spending a whole day doing so.
Is there anything that you can think of to fix this problem? I have had the sound card for about a year now. As of right now, I am still using headphones in the soundcard, but it doesn't sound good at all as I can't change anything in software. I also noticed that is no longer has as much installed as it would if I used my original CD. It doesn't have an option to switch sound modes anymore. It also doesn't now have "X-Fi Soundblaster" in "Add/Remove Programs" list. All it has in Add/Remove is "Creative Audo Console".
I uninstalled everything I could and deleted left over files in the Creative directory, so I deleted the whole folder after.
Only other thing I can think of is something in the registery is messed up, and causing the sound card not to be recognized. I also have WinXP SP2.

I spent yet another hour or two trying to fix it, and nothing changed.
I put it into a different PCI slot, and made no difference.
PCI slot doesn't seem to be the problem, I am thinking it is something within the registry itself.
I also put in the CD and there was no option to remove drivers, so I just went ahead and tried overwriting them, but that actually made things worse. My computer kept rebooting over and over when it hit the Windows Boot Up logo, and had to go into safe mode and do a system restore to get it back to normal.
It also keeps asking for the CD when windows loads and it detects the soundcard.
It will ask to locate acouple files, I do what it it says, but just as it is finishing installing the drivers it reboots the system.... when windows is loaded again, it will ask the same thing over, and will keep giving same results.
There isn't anything to completely remove all the creative files and folders including the 00's of registry keys. Maybe Driver Sweeper or Driver Cleaner Pro might help? ill try them, but as of now im not bothering with the soundcard.... ill just reformat. I just hope it ain't the card itself, because I am a month over the one year warranty, and the azzholes from creative said there was nothing they can do about it.
That alone made me want to turn to a different brand next time with better support. Creative has some of the worst support I know of.
They tend to leave people hanging with their defecti've hardware. What I don't get is, that the card still installs the drivers at times, and it will still work but the software won't.
I have been using it this whole time, but seems to freeze up my Guildwars alot.
It still sounds good, way better than Onboard, just not as good as before because there were no options for change mode, or couldn't access the equalizer.
Anyone know of any programs that will completely remove everything for the Xtreme Gamer Creative Software? Including everything in registry.
Also, is it possible that there might be a Windows Service that might have an effect on the problem? I tried enabling a few things, then try rebootin and reinstalling, but didn't seem to help.
But then again, I am not sure which services would cause the problem.
Definately something happened with the last Creative Driver update, only took a week afterwards for something to go wrong.

FF4 will not open after download... "you can't open the application "firfox" because it is not supported on this application." If 4 doesn't work on OS 10.5.8, then how do I get the old firfox back?

I downloaded the FF4 update and it has the "no smoking" symbol over the FF icon. When you attempt to open the app it states: "you can't open the application "firfox" because it is not supported on this application."
I have OS 10.5.8
If it will not work, how do I get the old version of FF back?

Are you sure you downloaded the .dmg file? It should have automounted for you and opened in finder. Then all you have to do is drag the FF4 icon over the Applications link in that finder window and it will install.
I seem to recall seeing the error you noted when I accidentally clicked a windows .exe file on my Mac.
Also, if you visit firefox.com from your Mac, it should be prompting you to download the .dmg anyway. The only way you could get the .exe would be to click the "other operating systems" link below the main download button.

Have loaded lion and now cant access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please

Have loaded lion and now can't access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please?

MS-Office for Mac versions 2004 and older do not run in Lion since these are PPC-apps for which Apple has dropped support.
Free alternatives to open Word and Excel files:
NeoOffice http://www.neooffice.org/neojava/en/index.php
OpenOffice http://www.openoffice.org/
Or get the 2011 MS-Office

BlackBerry Z10 Native Browser not supporting to Phonegap Application

Similar Messages

Maybe you are looking for