BlackBerry z10 switching off automatically when the battery is less tha k 50% and opening when connecting to a charger
BlackBerry z10 is switching off automatically when the battery is between 40 to 50%. And opens when I connect the charger.
First it gives a logo of a red sign. And the light. Then after few red light it opens. Pleaseee help.
I had the same problem, it happened as soon as I got my phone so Telus replaced it under the 30 replacement policy. If past 30 days they repair it.
Have it repaired or replaced.
Similar Messages
-
I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.
I had that happen with a MacBook. It turned out that the metal case above the slot was slightly bent down.
Putting a flat blade screwdriver in the slot and gently twisting it to move the metal case up allowed it to eject. Don't put it in too far you only want to bend the case not the drive.
The case can get bent down by picking it up with your thumb pressing down on the case above the slot. -
My z10 is being switch off unexpectly while the battery is above than75%
z 10 is being switch off unexpectly
while the batterry is more than 75%
sometimes the phone is overheating too
what can i do...pls hlp meHi akhand
Your question has been answered in http://supportforums.blackberry.com/t5/BlackBerry-Z10/My-Z10-turns-off-before-60-battery-level/m-p/2...
One post is enough. Thanks.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution -
BlackBerry Z10 switches off itself!
I have been using this phone for 2 months...and it switches off when the battery percentage is 40-50%....need help!
Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please re-try, but increase the wait time in step 4 to at least 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Blackberry z10 tuning off automatically
my blackberry z10 is turning off automatically and it is opening when i press the power button, some times it is tuning off and tuning on automatically it is ocurring 1-2 times at once charge. i have also factory reset it, still the problem is same. so can u tell me that what should i do?????
Solved!
Go to Solution.Fold a small piece of paper and wedge it along the top edge of the battery (the top, opposite the end with the contacts). See the image below where the red arrows are.
Try that a few days and see if the restarting persists.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Blackberry z10 turning off automatically
my blackberry z10 is turning off automatically every day 1-2 times, i have also factory reset it still the problem is same.what should i do?????
Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know! -
Reg : Blackberry Z10 switched OFF
Hi I got my blackberry mobile in Amazon at last month, I am facing the problem that the battery is having 20% of charge eventhough my phone is gng to sitched OFF for some time
Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If that does not cure it, then do the process again, but this time increase the wait on step 4 to 2 hours, and perhaps as long a 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My ipod display screen only shows a green light and the buttons are unresponsive. When i connected it to the computer , Itunes would not recognise it. Please can you help or seggest things that may help.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
When I start my imac all programms open and starts. It is annoing
When you shut down or restart, uncheck this option to restart open windows.
-
My Iphone 4 switches off automatically with 60% battery balance and doesnt start, also when i connect it to my laptop it starts back and shows the battery balance and it stay on for another few hours even without recharging.
what is the reason for this. do i need to take it to the apple store to get it checked
pls inform as its a costly phone and i cant just take it to any roadside person.
awaiting your replyThese features are most likely result of faulty battery. Make Genius reservation and take to Apple Store for free quick battery diagnostic testing.
-
My z10 switches off at 50% battery
I don't understand why my device switches off at half the battery even when it has half charge left . could anyone help me.
charles71421 wrote:
I don't understand why my device switches off at half the battery even when it has half charge left . could anyone help me.
What is happening is that your on-device battery meter is off-sync with the actual battery charge. Connect to your OEM wall outlet battery charger and while still connected and powered on, remove the battery a minute to reboot. After reboot leave to fully charge to 100%.
Thus will reset the false charge reading. You may need to do perform this procedure 2-3 times.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...
Hello s0ha1b
If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?
Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.
-
How to switch off automatic creation of the business partner?
Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya -
my phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help
These are usually the features of a faulty battery. Restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if better. If not, and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution. If no Coverage, still make Genius reservation and take iPhone to Apple Store for free quick (minutes time) battery diagnostic testing.
Maybe you are looking for
-
Any having the Experiance with message type UTILMD and REQDOC in ALE Idoc
Hi experts , I am working with SAP ISU ,in ALE Idoc message types UTILMD and REQDOC, ver 3.0 and 4.0 ,I got the almost all necessary details of UTILMD MESSAGE TYPE..but REQDOC is pending.If any one having the format of REQDOC segments and objectypes
-
Syncing purchased tv shows from mac to atv
My husband purchased several tv programs, which were immediately loaded onto the mac. How do I get them off the mac and back onto the ATV and into the shared file?
-
Entering data into custom table programmatically
Hi, I want to send data in internal table to a custom Z-table through a report program. How can I do this? Thanks in advance.
-
Third Party keyboard- possible to "Use all F1, F2, etc. keys as standard function keys"?
I've got a 3rd party Anker slim mac keyboard (http://www.amazon.com/Anker%C2%AE-Bluetooth-Wireless-Keyboard-Tablets/dp/B005ONM DYE). I really need to be able to use the F7 and F8 keys for my audio program (Pro Tools 10), but they always do the consum
-
Invoice date(future date) in billing shouldnt be allowed
Hi All, In VF01 , the user can make the invoice date in the future date. there are few cases which has happened esp. in export invoices. Need to block this facility. i.e. User shouldnt allowed to enter future date and it should allowed to enter back