Blackberry Z10 won't turn on after software update. Black screen and LED light blinking

Im using BB Z10 (stl-100-1 ) os version 10.3.1 for 9 months, recent days it hangs a lot and it hanged later not turning on and red led has been blinking simultanously. please help me

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please do it again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

IPhone5S won't turn on after software update

iPhone5S is bricked after software update. Apparently this is becoming widespread. Hello, Apple?????? http://www.techienews.co.uk/976861/apple-ios-7-0-6-update-allegedly-bricks-iphon e-5s-ipad-air/ http://www.thebitbag.com/iphone-5s-and-ipad-air-bricked-by-apple-ios-7-0-6-updat e/70286

Hey Stheus3,
Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If your device is not recognized in iTunes for Windows while in recovery mode, see this article (Specifically Step 5, sub-step “If the device is not recognized while in Recovery Mode”)
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Crash during software update = black screen and no way to Restart

Had to rebuild my hard drive and system from original Leopard install CD.
Subsequently, initiated internet Software Update which transferred OK.
After Software Update restarted to finish installation the process locked up at "54% complete". Restarting to break out of frozen state, (what else might I have done?!) machine begins to come up but screen goes black then text/code at top of screen scrolling down to a message that I need to Restart but such is repeatedly unsuccessful + no way to open CD drive to perhaps begin again from scratch.
Machine is in a partially updated and therefor scrambled state. Suggestions anyone??

You can open the drive by restarting while holding down your mouse button, wired mouse only.
Perhaps you had the following?
You may be experiencing a Kernel Panic as seen and described in Apple doc. HT1392. If not, disregard.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
 Luck! DALE

Mac won't turn on after software update ( newest update if mountain lion)

Update my Mac book pro with newest software update if mountain loin and now won't turn on?!?!?

Intel-Based Apple Portables: Troubleshooting a computer that will not power on

Computer won't turn on after Software Updates

About a month ago my computer had some Windows Updates, I installed them as per usual, it asked to restart the computer, but once it shut down, it wouldn't turn back on. I tried a few different outlets, no change (all of these outlets work). I left it unplugged overnight (8-10 hours) and when I plugged it in the following morning, it turned on and was fine until this past weekend.
Again, there were more updates, this time it was for AVG and when it went to restart, it again wouldn't turn on. I tried the same thing, and it's not coming on. The light by the power button will flash when I push the button, real quick, but nothing. The light in the back shows power going to it. I believe my computer is in the HP All-in-One 200 family, but I'm not sure which one (and though I've registered it, it doesn't tell me on my account which one I have, or I just can't find it).
Is the motherboard done, maybe the RAM, or the HDD? I don't have the money to get a new computer at the moment so I really want to try and get a few more years out of this one (I have had it for 5 years). Any thoughts would be appreciated. Thanks.

XstreamINsanity, welcome to the forum.
I always begin with the easiest possible solution. If you have System Restore enabled, I suggest choosing a Restore point before the first software updates. This may solve your problem if it is the updates causing the problem.
If this doesn't solve your problem, we will try some other possible solutions.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

IPhone won't turn on after software update

Last night I went to update my iPhone 4S to the latest iOS 7. I went to sleep while it was updating and it was charging and when I woke up it wasn't on and it kept vibrating every few seconds when it was charging. I tried to turn it on, then I tried to restart it and held the home and sleep buttons for 20 seconds. I tried connecting it to iTunes and iTunes won't detect a device. Any help??

I tried to restart it and held the home and sleep buttons for 20 seconds.
Try it this way ...
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.

80G iPod won't turn on after software update

Downloaded new software for 80G ipod. Walked away while it was downloading. When I returned, ipod no longer showed in itunes and now ipod will not turn on or show up in itunes. Help!!

Deleted iTunes and Reinstalled Works Fine Now.

6700 Classic - won't turn on after software update

HELP!!!!!!!!
I decided to update my phone software on my phone (not through a pc/laptop) It said installing 1/3 might go off for 30 secs ........ an hour later it is still flashing a blank gray screen with a line across the top, I took battery out and left for 20 mins but nothing changed when I put battery back in ......
Please help as this is my only form of contact as I'm housebound

Sorry for the delay, I don't check the forums all that reguarly. You have to send the phone back to the retailer who in turn sends it to nokia - the whole process took about 2-3 weeks if I recall correctly.
On a better note, some progress on this has been made! I ordered a 6700 classic on Vodafone through my Vodafone Platinum business provider, but stipulated it must be running v13.1. They came back saying Nokia wouldn't authorise this on the batch of phones they had.
So, as my girlfriend's Sony Ericsson was failing, I took a 6700 classic running v10.5. When I received it, I knew not to attempt the upgrade over the air, so just before handing the phone to her, I plugged it into my Ovi suite and ran the update checker - and v13.1 was available!
Some progress indeed.So, it might not work for all networks, but certainly for a 6700 classic from Vodafone, it seems this can be upgraded to the latest version - OK not over the air, at least I don't think so, I am certainly not going to try that again but there is a solution for some nonetheless using Ovi and being on the right network - its a network/country lottery it would seem.
Perhaps Nokia or someone who has recently used the phone's built-in update method can confirm or deny this method working?
Visit my Technology Blog - amiga600.net

Phone will turn on after ios update, itunes symbol and charger symbol keep showing up on screen

iphone 4 won't turn on after an update, itunes symbol and charging symbol keep showing up but nothing happens when you press any buttons

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPho fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why won't my system won't suut down after software update?

why won't my system won't suut down after software update?

That's an annoying issue. Disconnect all USB devices such as Pen drives and external HDDs before doing the update.

Macbook wont turn on After software update

PPlease help!
my macbook air 11 wont turn on After software update. The screen completely black . Power button is not responding éven if it is fully charged.
THank you
NOra

Have t you tried a SMC reset?
http://support.apple.com/kb/HT3964
It may be helpful if you indicated the EXACT MBA model you have and the OSX.
Ciao.

HT1222 iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

P.S. I just noticed; when I hold the power and home button at the same time while it's plugged in as if I was going to restart it, my computer acts as if I'd plugged it in again (it makes the USB notification sound, itunes opens up again, I get the same "your iphone is in recovery mode" message, etc.), but that's the only response I've been able to get from pressing anything on the iphone. thanks again.

My iphone won't turn on after recent update

My iphone won't turn on after recent update. How do I fix this?

2 more options:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

Phone turns off and led light blinks wont turn back on

I have the 8100 and have had it for about 2 weeks I bought it off line since my old phone broke. This morning I took it off my charger and went to a meeting after the meeting I looked at my phone and the led light was blinking I hit a button and nothing happened. I then tried to turn the phone back on but nothing happened. I removed the battery waited 5 minutes then put it back in and it started to work again. But again the same thing happened. I tried this multiple times but nothing change it still went back after a few minutes. I took the battery out sim card and memory card out for an hour then put them back in and the same thing happened. Has anyone had this happen before and is there anything I can do for it. Again after I turn my phone on it "shuts off" the led light blinks like I have a message but I ca not do anything the only way to get it out of this is to remove the battery and put it back in but it reverts back to this in a few minutes. Any help would be greatly appreciated thanks

Greetings, and welcome to the BlackBerry.com Support Forums.
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Report back?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pro won't start. Instead get a black screen and a beeping every 2 seconds. LIght at front right corner of keyboard flashes in sequence with beeping.

Pro won't start. Instead get a black screen and a beeping every 2 seconds. Light at front right corner of keyboard flashes in sequence with beeping.

If it is giving a single beep every two seconds, then it is not seeing any of the memory. You could try taking the back off, remove the memory module and reinsert to see if that corrects the problem. Or just take it to an Apple store genius bar and have the techs do that for you.
If you are uncertain about working on the memory modules, you can find on-line videos for doing so at OWC, http://www.macsales.com where you can see the procedure for your year, make and model of MacBook Pro.

Blackberry Z10 won't turn on after software update. Black screen and LED light blinking

Similar Messages

Maybe you are looking for