Blackberrycurve 8310 white screen with bleu battery with a lightning bolt
i read many trick on that forumbut no one resolve that problem,
i changed the battery two time(blackberry one) and couldnt fix the bug
My Blackberry dont want to open like he use to be so im confuse now and what should i do
thanks for the help -.-
Similar Messages
-
Nokia 6288 - white screen with battery icon
I've had problems with my Nokia 6288 since very soon after I bought it.
I turn my phone on and it just has a white screen with the battery icon. I can punch numbers into the keypad to call out, but I cannot do anything else.
Any idea how to reset the phone or anything that might help me be able to use my phone again?does it say "phone restricted"? if it does, it is a matter of either updating to the latest firmware via Nokia Software Updater, or just take out your battery and reinsert it and turn the phone back on. i too had similar problem as to what you are describing.
-
Red light for about 3 seconds, then a white screen with a sandclock = continuous (8310)
Hey everyone. I'm new to this whole Blackberry talk, so I'll try to go into as much detail as i can with my problem!
I bought this from product from somebody on the internet. Well, my phone was just on my desk earlier today, working perfectly fine, when all of a sudden the screen became black, and the light at the top of my phone stayed red for about 3 seconds. The screen would then turn white afterwards and the sand timer would be there, and that would happen for about 5-10 seconds, then it would turn black and the red light would appear, then the white screen with the sand timer. Therefore it's repeating itself.
From what i've tried to understand, I have taken the battery out of the phone for a good amount of time, 15 minutes, and yet nothing. When i always put the battery back, it automatically goes to the black screen with red light.
I've also tried to push the reset button at the bottom left beside the battery, and that doesn't work either.
I don't have the slightest clue on what OS, and how to use the desktop manager either.
If someone can help me with this, I'd totally appreciate it!
Thanks!Here's a link to the basics:
http://crackberry.com/blackberry-101-how-lecture-series
look at 12 and 22
Let us know how it comes out!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
STUCK on white screen with battery icon in the middle with RED LIGHT
I have BB curve 8900 and my BB shutdown by itself yesterday and it wont start on again !
so i charged it the red LED start to show and white screen with battery icon in the middle it looks like empty battery, and stuck on it and sometimes it keeps spinning over and over again until it bcome black screen then it starts the same begining !
I tried the hard boot by taking the battery out for sometime and reinstalled it but it didn't work. I even try putting a different battery (friends battery) but still no joy..
and the main catch is if i try taking out the battery and plug the charger or connects it to the laptop it does the same thing without even any battery in it.
So is it really a Battery problem or the OS problem.?? (If its a OS problem, can u install it myself at home.?
Waiting for the reply
Thanks
Jasdeep Jollyjasdeep_jolly wrote:
if it does not boot then..??
Well, you need to do as suggested first.
Then, if not: If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Any solution to a white screen with a battery icon with a lightning bolt through it on the Tour?
My daughters blackberry tour suddenly stopped taking a charge and would not power on. It just shows a white screen, with a battery shaped icon & lightning bolt through it. Went to our local cell store and they did a battery swap for us. The phone worked for about 2 hours then did the same thing. After a couple more swaps with no change, they un installed and re-installed the software. This again fixed it temporarily. When it quit again, we were sent a replacement phone. The replacement did the same thing. We were sent a 2nd replacement, but in the meantime, the first replacement started working. It worked for about a week then did the same thing. Now we have attempted to activate the 2nd replacement and it gets the same screen and will not charge enough to even activate it. I'm working with the customer support (phone is under warranty still), but so far no solution. Anyone else experience this? I find it strange that we now have a 3rd phone, doing the same thing and we have tried new batteries and an new charger.
Here are some good charging tips, please read and you'll see that many of them will apply to you.
http://www.blackberryfaq.com/index.php/Maximum_Battery_Life
And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
Read this article also: http://www.blackberry.com/btsc/dynamickc.do?externalId=KB18223&sliceID=1&command=show&forward=nonthr...
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hey everyone,
This morning i took my phone out of the charger and everything was normal however, once i got in the car i looked at my phone and realized it was turned off. I tried turning it on again as well but all it does is going to the start up screen (The white screen with the apple logo) and then it turns off again as well. I also put it on the charger but it does the same thing but repeatedly. So it just goes to the white screen and off again. At last i resorted to recovering my phone even if it meant losing all my data. Slow internet connection meant it took all night but in the morning i recovered and everything and got to the last step ( It told me its finished but i should leave my phone connected to itunes and it will pop up there) but all that popped up was an error screen. It still broken but now sometimes when i try to turn it on the same white screen with the logo comes on with a bar under it. this bar fills up a little then the screen goes black again. Is there any other way i can try to fix this?
P.S. There are no apple stores in my area so i took it to one of the phone stores here and even they said they couldnt do anything about itTry:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Hi
My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than YouIf it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase. -
My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HI
this happened today suddenly while i was working on my iPad it kicked my out of the app that i was using then white screen with black apple logo came out, i thought it was an ordinary thing cause this happens all the time with me, but this time it refused to turn on! After the white screen with the black logo vanished i wad waiting for my lock screen but no, a black screen showed up just like that! And could tell it was black "lighten" screen i tried more than 10 times to do the home+power thing but it wont work, whats wrong with my ipad!If the battery is completely drained it may take some time while on the charger before the iPad responds. Plug the iPad into the charger that came with it and plug that into a good wall outlet. Wait one hour. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is 100%. If it doesn't start up make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. They will examine your iPad and explain your options.
-
White Screen With Apple Symbol and Turning Gear Appears At Startup
I downloaded the most recent software update with Mac OS X 10.5.4, a security update, and some sort of Safari update (not so sure). After I restarted the computer after the update, everything was okay. A few minutes later, I decided to restart it while troubleshooting for a wireless internet problem in the house. As normal I heard the tone and saw the white screen with the Apple symbol on it and the turing gear, but my Mac did not log in and the gear kept on turning for about half an hour. Now, every time I hold down the power button in an attempt to fix it, it always does the same thing. I tried pressing different key combinations at the startup and the process in which I disconnected the AC adapter, took out the battery, held down the power button for 5 seconds, put the battery back in, and connected the AC adapter, and that didn't even work.
What a worse coincidence with out the 10.5.4 upgrade though. Exact same problem. Tried booting into single user mode No shell/command prompt, boot with Leopard DVD. DVD got stuck.
Was so ****** off. Its 1 am in the east coast and I have all my work stuff on the MB
Finally did the Zapping and it booted back. was sweating in a 65 F temperature. **** it.
Now Should I run verify disk or not?? What kind of impact does verify disk has?
It probably is disk intensive but it does not screw up right? Does it run fsck?
*That said, the whole problem came up when I used a flash drive from a windows PC to copy some files to my mac. I have done that innumerable number of times. Why would it freak out now?* -
I get a white screen with blue streaks? Keep turning on and off until it disappears.
I get a white screen with blue streaks? Keep turning on and off until it disappears.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my i phone 5 was dropped, didn't break but went completerly black screen and nonresponsive. I pushed both the home button and top button no response. I plugged it to the computer it gave me white screen with black apple. I pushed the home and the top went black then gave the itune and the charging plug picture. I tried to download and update, the message came as couldn't restore due to unknow error. Any help??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
MMy phone been stuck in recovery mode tried to restore it nothing worked what can I do its at mobile iphone 5sSo I have a tmobile iphone 5s and it's stuck on the white screen with black logo I tried restoring it with iTunes & iTunes is just telling me errors and my iphone would shut down put a blue screen then go back with the white screen
Has the phone been unlocked officially? Has the phone been jailbroken in the past? If yes, these could be reasons for the behavior of the phone.
iPhone: About unlocking
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues -
My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!
You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock -
My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Maybe you are looking for
-
Not able to execute a procedure from Process
Hi I have created a Tabular Form type region. And I have created a Database procedure to insert records into some other table. Inorder to execute this procedure I was trying to create a PL/SQL Page process. When I am trying to enter the procedure det
-
.
-
Bridge preferences causes program crash
Hi I'm on an intel mac running OSX 4.9. I use Bridge CS3 2.1.1.9 When I try to open preferences, Bridge quits. Do I trash the preferences file? If so, what's it called and where would I find it? Will that affect my star ratings? Thanks, Alan
-
Prevent form/timer hanging while holding the minimize button
I got troubles when the customers holding the minimize button (without release) on my form, it make all forms and all timers/controls entirely hanging. And thus make some exception bugs for my application. Steps to Reproduce Behavior: In Form1, cre
-
Dreamweaver CC 2014 unbelievable slow processing changes
Ever since this latest update to Dreamweaver (2014.1) I cannot believe how slow this is when processing the simplest changes in code. I am on a windows 7 platform service pack 1 with 12 GB ram. Does anyone have any suggestions for improving the speed