Blackboard and Windows Apps

Are there plans to include accessibility to online learning systems, i.e. Blackboard, as well as the MS Windows Office Suite on the iPad?

Blackboard has a mobile app already in the iTunes Store. It's up to your school whether they wish to license the back-end capability from Blackboard.
As to Microsoft's Windows products, that will never happen; it's not technically feasible to run Windows apps on an iOS device. Whether or not Microsoft will ever release iOS versions of their software only Microsoft could say. Initially they said they had no interest in doing so, but they could change their minds.
Regards.
Message was edited by: Dave Sawyer

Similar Messages

  • Nokia and Windows apps error code c101a006

    Just got a Lumia 920 and it is fantastic! But when you get a new phone you need those apps. I got a couple of apps downloaded and then bang! Error code c101a006 - please try again or try later. It's been 24 hours now and have tried rebooting, clearing caches and cookies but no joy!
    I contacted Microsoft support and all they would do is pass me off to Nokia. They even supplied the Nokia Australia support phone number!
    Anyone out there got any ideas or solutions?

    Microsoft have been experiencing issues with Marketplace and I bet their servers are busy with all the new WP phones being sold at the moment. Not sure how Microsoft arrange their servers but trying at different times of the day may make a difference. I presume your phoen is set to Country: Australia and language: English. Try changing your country to UK or Ireland and see if it makes any difference. Can change it back after.

  • U410 booting slow and windows app slow

    My Lenovo U410 is taking a lot longer to boot up nowadays (5-7mins) compared to when I purchased it less than a year ago (about 20 seconds).
    I think the mSATA (24GB) is not working properly, but I am not 100% sure.
    From other threads and other sources on the internet, I have tried the following things.
    Downloaded HDTune and ran Error Check
     - Got 1340 disck errors by the 83 MB mark in 3hrs of scanning.  Decided to abort since scanning the full 24GB would take too long.
    BIOS
     - Rapid Start was Enabled, but the iRST PARTITION STATUS was INVALID, but SATA controller mode was AHCI (when I tried to change to RAID, the system would report an error on startup and be stuck in a restart loop)
    Also read that Lenovo uses expresscache (does it not use intel rapid start technology?)
     - type command eccmd.exe -info
     - returned HFS volume not mounted **ERROR** eccmd exited with error 0x45d (1117)
    However, my computer seems to be able to detect the 24GB mSATA.  It also passes a chkdsk.
    Another problem I am having is with Windows applications.  For example, when i try to run msconfig it takes 5mins to load a simple and small program. 
    In the recent past, Windows wouldn't restart (just hangs there), windows installer wouldn't install some programs (just hangs), but it seem to fix itself recently.
    I am hoping for steps to restore my original boot time. (do i look to install expresscache or intel rapid start?) 
    Is there anything anybody could suggest?  Is there a definitive way to check if the mSATA is defective?

    hi leon09,
    In addition to what have already been suggested, I'm positive that the cause of the slow boot-up is the SSD drive. The 1340 disk errors that you received after running an error scan on the SSD proves that the SSD needs to be replaced.
    If you're still able to boot into Windows, try to go to the Control Panel (large icon view) > Programs and Features and uninstall Diskkeeper Expressache. After uninstallation, reboot the PC and observe.
    For the SSD, you may need to contact lenovo for service on how to go about getting the SSD replaced.
    If you purchase the laptop in Canada, here's the number:
    Country or Region
    Product
    Language
    Telephone number
    Hours of operation
    Africa
    THINK-branded products
    English, Afrikaans
    South Africa
    0800 110756
    9AM - 6PM
    Saturday - Wednesday
    Central Africa
    Contact the nearest Business Partner
    Algeria
    THINK-branded products
    French, English
    +33-6-7348 1739
    Argentina
    THINK-branded products
    Spanish
    0800-666-0011
    9AM - 7PM
    Monday - Friday
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    Spanish, English
    0800-266-0570
    8AM - 10PM
    Monday - Sunday
    Aruba
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English
    1-877-4-LENOVO
    1-877-453-6686
    24 hours a day
    7 days a week
    Australia
    THINK-branded products
    English
    1-800-041-267
    6 AM – 8 PM AEST Monday to Friday
    ThinkServer
    English
    1-800-041-267
    6 AM – 8 PM AEST Monday to Friday
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English
    1-800-041-021
    24 hours a day
    7 days a week
    Austria
    THINK-branded products
    German
    0810-100-654
    9 AM - 6 PM
    Monday - Friday
    ThinkServer
    German
    01-211-454-610
    8AM - 4PM
    Monday - Friday
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    German
    0810-151-500
    (zum Ortstarif)
    9AM - 6PM
    Monday - Friday
    Bahamas
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English
    1-877-4-LENOVO
    1-877-453-6686
    9AM - 6PM
    Bahrain
    THINK-branded products
    Kanoo IT :
    00-973-1771-1722
    Bahrain Business Machine LLC :
    00-973-1758-4302
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English, Arabic
    00-9731-749-0330
    9AM - 6PM
    (Sunday - Thursday)
    Bangladesh
    All Lenovo Products
    AWSP Flora Limited:
    19-011-014-918
    88-018-1708-2968
    (Mobile)
    Email: [email protected]
    AWSP Global Brand Pvt Ltd:
    70-200-6853
    88-0171-000-0000 (Mobile)
    Email: [email protected]
    Barbados
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English
    1-877-4-LENOVO
    1-877-453-6686
    24 hours a day
    7 days a week
    Belgium
    THINK-branded products
    Dutch, French
    02-339-36-11
    (Warranty service and support)
    9 AM - 5 PM
    Monday - Friday
    ThinkServer
    Dutch, French
    02-339-36-11
    24 hours/day
    7 days/week
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    Dutch, French
    02-700-73-77 (lokaal tarief)
    9AM - 6PM
    Monday - Friday
    Bermuda
    THINK-branded products
    English
    1-800-426-7378
    24 hours/day
    7 days/week
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English
    1-877-4-LENOVO
    1-877-453-6686
    24 hours a day
    7 days a week
    Bolivia
    THINK-branded products
    Spanish
    0800-10-0189
    8AM - 6PM
    Monday - Friday
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    Spanish, English
    0800-10-0982
    8AM - 10PM
    Monday - Sunday
    Bosnia and Herzegovina
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    Bosnian
    387-3356-3170
    9AM - 5PM
    Monday - Friday
    Brazil
    THINK-branded products
    Brazilian Portuguese
    Calls made from within the Sao Paulo region
    11-3889-8986
    8 AM - 6 PM
    Monday - Friday
    Calls made from outside the Sao Paulo region
    0800-701-4815
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    Brazilian Portuguese
    Technical Support:
    Sao Paulo Brazil
    11-3140-0500 - Toll
    0800-885-0500 -Toll Free
    9AM - 8PM
    Monday - Friday
    General Information:
    Sao Paulo Brazil
    11-4003-5366 - Toll
    0800-888-5366 - Toll Free
    9AM - 5PM
    Saturday (Except holidays)
    Brunei Darussalam
    THINK-branded products
    English, Bahasa Melayu
    Dial 800-1111,
    then dial 866-273-5446
    9AM - 6PM
    Monday - Friday
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English, Bahasa Melayu
    Dial 800-1111,
    then dial 877-404-9661
    9AM - 6PM
    Monday - Friday
    9AM - 3PM
    Saturday
    Bulgaria
    ThinkServer
    359-2-9734618
    359-2-9693650
    8:30 AM - 5PM
    7 days/week
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    Bulgarian
    00800-11-944-26
    9AM - 6PM
    Monday - Friday
    Canada
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English
    1-877-4-Lenovo
    (1-877-453-6686)
    24 hours/day
    7 days/week
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Acrobat Reader 8.1.12 takes over Vista desktop and windows apps

    Install is good, but 90% of my desktop icons become acrobat reader icons. If I double click on one of the icons - a message reads "acrobat cannot open 'pgmname'.exe not supported file format etc. etc. (pgmname is the application I'm trying to open). I un-installed 8.1.12 and everything is fine. I re-installed today and the same thing happens. I have a Dell laptop running Vista Home Premium. I believe this started after I installed XPSEP Vista 32bit. I needed this to print invoices from Quickbooks.

    Read this:
    http://support.microsoft.com/kb/950505/en-us/

  • Windows 10 Mail and Calendar app will not sync with Office365 account

    I'm playing around with a Windows 10 PC build 10130. I want to try out the mail and calendar app to see if it's good enough for daily use, in lieu of Office.I keep getting the "Make My PC more secure popup box" and clicking enforce these policies does nothing.Opening mail and calendar, I get the "This device doesn't meet the security requirements set by your email administrator" error.I am logged inusing a domain account (but with local admin rights)The machine is using Bitlocker.I used just password, now using PIN too to log-on.Based on another post in Office365 forums I removed the setup account from the machineOur mobile device mailbox policy is pretty standard-Allow mobile devices that don't fully support policies to synchronize.OWA for Devices blocks devices that don't support device encryptionPassword: Required, 4 characters,...
    This topic first appeared in the Spiceworks Community

    I'm playing around with a Windows 10 PC build 10130. I want to try out the mail and calendar app to see if it's good enough for daily use, in lieu of Office.I keep getting the "Make My PC more secure popup box" and clicking enforce these policies does nothing.Opening mail and calendar, I get the "This device doesn't meet the security requirements set by your email administrator" error.I am logged inusing a domain account (but with local admin rights)The machine is using Bitlocker.I used just password, now using PIN too to log-on.Based on another post in Office365 forums I removed the setup account from the machineOur mobile device mailbox policy is pretty standard-Allow mobile devices that don't fully support policies to synchronize.OWA for Devices blocks devices that don't support device encryptionPassword: Required, 4 characters,...
    This topic first appeared in the Spiceworks Community

  • Windows App developer account and .aetx file, Unknown error while generating AET

    Hi Everyone,
    firstly, sorry for my not perfect english, but I hope that somehow understand what i  want to say.
    So, I am a student (I do not know if it makes a difference but inform you), and I wanted to write a universal windows app for company (This would be the first application WP and Windows this company, previously did app on Android and IOS, and websites).
    I wrote a little bit and I wanted to throw the first version on hockeyapp.net to the head of the company and the customers can test it and i have problem. I upload .appx file bu i have problem with generate .aetx file. When I run this command AETGenerator.exe
    PFXFilepath PFXFilePassword it gives me an error in command prompt
    Unknown error while generating AET
    startIndex cannot be larger than length of string.
    Parameter name: startIndex
    I've read about these certificates but did not find a specific answer (a very specific answer). So what I need to do, What do I need,  what to buy and etc.
    What are my solutions?
    What should I do?
    Is it enough that I register and I buy individual developer account?
    I hope someone answer me, 
    thank you :)

    Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
    Another member has same question.
    https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
    If you want to test your app, you can also send to beta store and you can get response from the testers.

  • Is it possible to syncronize iphone contacts and windows 8 app PEOPLE?

    I can't syncornize the iphone contacts with the app PEOPLE in windows 8. That app contains the contact that I can see in the APP MAIL.
    Well, I can syncronize iphone contacts with gmail or windows contacts.
    If I use the gmail way I can link a microsoft account to gmai land syncornize it with the app people. Ther e is a problem, The syncronization between the app and the microsoft account works well, but the syncronization between gmail and Microsoft account (outlook.com) doesn't work.
    If I use the windows contact way I can't syncronize tose contact with those of the app PEOPLE.
    Is there anyone who can help me?
    thanks a lot
    Marco

    Hey andre67,
    Thanks for the question. The following article outlines the system requirements for each version of Boot Camp and Windows:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Thanks,
    Matt M.

  • Windows 8.1 Enterprise and unattended answer file and missing apps

    Hi,
    Have just created a new WIN8.1 x64 enterprise image on a vm and captured it using the capture media.
    I have imported it into SCCM 2012 R2 and have created a new deployment task and have sent it out to a test computer.
    Once the computer has reimaged, and the task completes, a user logs on and no apps appear at all. not even the default apps like bing, news, weather etc. Just IE, Desktop etc.
    In my task sequence, nothing really special happens, other than install image, apply drivers and join domain. I have also made a unattended file to skip through OOBE stuff that happens and to
    make sure locale is EN-AU. This is set at Apply Operating System.
    What am I doing wrong or missing?
    I all I want is the default  windows 8.1 apps to appear for each user who logs on.  There is no need to do a copyprofile as i have not made any modifications to the user account
    during image build.
    I did not update the apps before taking the image.
    Here is a copy of the unattend.xml file
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
    <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <TimeZone>Tasmania Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-AU</InputLocale>
    <SystemLocale>en-AU</SystemLocale>
    <UILanguage>en-AU</UILanguage>
    <UserLocale>en-AU</UserLocale>
    </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:c:/downloads/windows%208.1%20ent/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>

    Hi,
    Have just created a new WIN8.1 x64 enterprise image on a vm and captured it using the capture media.
    I have imported it into SCCM 2012 R2 and have created a new deployment task and have sent it out to a test computer.
    Once the computer has reimaged, and the task completes, a user logs on and no apps appear at all. not even the default apps like bing, news, weather etc. Just IE, Desktop etc.
    In my task sequence, nothing really special happens, other than install image, apply drivers and join domain. I have also made a unattended file to skip through OOBE stuff that happens and to
    make sure locale is EN-AU. This is set at Apply Operating System.
    What am I doing wrong or missing?
    I all I want is the default  windows 8.1 apps to appear for each user who logs on.  There is no need to do a copyprofile as i have not made any modifications to the user account
    during image build.
    I did not update the apps before taking the image.
    Here is a copy of the unattend.xml file
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
    <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <TimeZone>Tasmania Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-AU</InputLocale>
    <SystemLocale>en-AU</SystemLocale>
    <UILanguage>en-AU</UILanguage>
    <UserLocale>en-AU</UserLocale>
    </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:c:/downloads/windows%208.1%20ent/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>

  • Sysprep and Windows 8.1 -- missing Metro apps after reboot?

    So, I'm trying to figure out an issue with Sysprep and a clean-install Windows 8.1 64 Enterprise system:
    When I sysprep the computer from my admin account with my unattend.xml file, when it reboots, I'm only getting 7 Metro apps at the start screen and
    14 Metro Apps at the "all apps" screen -- things like Weather, Maps, Calendar, Mail, etc are missing -- and actually look like they aren't installed
    as searching for something like "People" -- gives no results.
    From what I've been able to gather, the behavior of the start screen should controlled by an appsFolderLayout.bin file, but when I first set up the initial
    account (not "administrator", but the initial local admin account), that file does not exist anywhere.
    I've tried creating the file manually by running:
    Export-StartLayout -As Bin -Path C:\Temp\appsFolderLayout.bin
    and either putting it in \Users\<myadminaccount>\AppData\Local\Microsoft\Windows
    or \Users\Default\AppData\Local\Microsoft\Windows
    and sysprepping again (after restoring a snapshot to the pre-sysprep/post-clean install state), but this isn’t making any difference.
    When I run sysprep /generalize — the .bin file is deleted and replaced by some other default one — that I’m not sure where it is generated from.
    Does anybody have any suggestions here?    Windows 8.0 just worked with my unattend.xml file without having to mess with appsFolderLayout.bin, so I’m not sure what I’m missing.
    Thanks!

    If you are still having trouble, this is an outline of the full process I use that seems to be consistently producing good results:
    - Install Windows 8.1 Enterprise with autounattend.xml, in particular, blank administrator password, add user account test, auto-logon as Administrator, run "net user test /delete" immediately after logon to get back to just having the administrator account.
    There should be no reason why all that has to be done in autounattend.xml, but it is the way I do it. There are a few other mandatory settings if you want a fully-automated setup.
    - At this point in time the Administrator account only shows a few tiles on the start screen, all actions are performed using the Administrator account.
    - Run Schtasks.exe /change /disable /tn "\Microsoft\Windows\AppxDeploymentClient\Pre-staged app cleanup" before the task has had a chance to run.
    - Install all applications, updates and settings as you want.
    - Run Sysprep, in particular blank administrator password, add user account test, auto-logon as Administrator, run "net user test /delete" immediately after logon to get back to just having the administrator account. Also importantly we set CopyProfile to
    false under Microsoft-Windows-Shell-Setup specialize pass. I don't know because I haven't tried it, but I imagine that if you run this and copy the Administrator profile to the default user profile then the default user profile may be missing some apps. We
    do all customization of the default user profile explicitly by loading the registry hive and editing it directly.
    After the image is deployed the Admistrator account has all the standard tiles present, but two of them report errors (I think it is Music and Videos). Any other profiles have all tiles present and all apps work.
    The full sysprep XML is included below in case it is useful to anybody. The company-specific settings and passwords have been blanked out, but otherwise it is the full one we use and fairly generic apart from the Australian settings. Note that this one is
    for a 64-bit image.
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="generalize">
    <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SkipRearm>0</SkipRearm>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <ComputerName>*</ComputerName>
    <CopyProfile>false</CopyProfile>
    <ShowWindowsLive>false</ShowWindowsLive>
    <TimeZone>AUS Eastern Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SkipAutoActivation>true</SkipAutoActivation>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
    </OOBE>
    <UserAccounts>
    <AdministratorPassword>
    <Value>XXXXXXXXXXXXXXXXXX</Value>
    <PlainText>false</PlainText>
    </AdministratorPassword>
    <LocalAccounts>
    <LocalAccount wcm:action="add">
    <Password>
    <Value>XXXXXXXXXXXXXXXX</Value>
    <PlainText>false</PlainText>
    </Password>
    <Description>Temp Account We have to Add because setup requires it</Description>
    <Name>temp</Name>
    </LocalAccount>
    </LocalAccounts>
    </UserAccounts>
    <RegisteredOrganization>XXXXXX</RegisteredOrganization>
    <RegisteredOwner>XXXXXX</RegisteredOwner>
    <TimeZone>AUS Eastern Standard Time</TimeZone>
    <AutoLogon>
    <Password>
    <Value>XXXXXXXXXXXXXXXXXXX</Value>
    <PlainText>false</PlainText>
    </Password>
    <Domain>.</Domain>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <LogonCount>1</LogonCount>
    </AutoLogon>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>net user temp /delete</CommandLine>
    <Description>Delete temp user account that we have to create</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-AU</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-AU</UserLocale>
    </component>
    </settings>
    </unattend>

  • My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

    My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

    Lbo51380 wrote:
    cant find an itunes app for my laptop. is there something i can get that will help with this?
    Go here -> http://www.apple.com/itunes/download/

  • I set the prefferance to show tabs and windows from last session but every time i power down my firefox or my Mac all my app tabs and windows disapear. what's wrong with my settings.

    I set my preferences to '''show all tabs and windows from last session''' and un-checked the box for '''don't load tabs until selected''' but every time I turn off fire fox and power down my Mac all my app tabs disappear.

    Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
    *https://support.mozilla.com/kb/Clear+Recent+History

  • Using the Kobo App for reading FXL on Android and Windows devices?

    Hi, I am just finishing transferring my iPad App into a FXL ebook so I can get it out to a wider audience now that this technology is available, but I have so far only tested it on a Mac with both the iBooks and Kobo Apps. I also tested with Adobe Digital Editions, but this seems to have a bit of a bug when you use a button to click to another page the new page appears zoomed in and cropped off!
    Has anyone tested FXL on the Kobo App on a Android and/or Windows device, tablet, smartphone, laptop etc and if so does it work the same as on the OS Mac version?
    Cheers
    Gia

    Thanks for sharing this.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How Do I Change the Language of Start Menu and Modern Apps After I Installed Windows? Applying Language Pack only Localizes Traditional Applications?

    Howdy,
    I installed Windows 10 Technical Preview with original language settings for the US region.
    No that I need my Windows localized to Espanol - Spanish.
    I type "language' in Cortana, select Add language to this device and click Add a language on the Region & language.
    Then I select added language and click Set as primary.
    After the restart I see that while Windows Explorer is displayed in Spanish, Start menu is displayed in English (including app sections such as Explore Windows), as well as Modern apps that have retained their English names (such as Mail).
    I even set the location to Spain in regional settings (although I didn't like the idea, as I want to browse the US market). To no avail.
    How do I change the language of the Start menu and modern apps?
    Thank you.
    Well this is the world we live in And these are the hands we're given...

    Okay, I ran the in-place upgrade and it worked!
    What I did:
    1. Downloaded and attached Espanol edition of Windows Setup ISO.
    2. Started setup.exe from that ISO.
    TIP: If need be, you can downgrade your installation of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview by changing two registry values, EditionID and ProductName. You may use the following registry file on Windows 10 Enterprise
    Technical Preview:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
    "EditionID"="Professional"
    "ProductName"="Windows 10 Pro Technical Preview"
    Import these settings into registry and start setup wizard from the Windows 10 Pro Technical Preview setup CD. Voila! Windows will offer upgrade of your current setup of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview with
    saving all your settings and applications!
    The only thing that wasn't localized are the new app sections. I still see Explore Windows and Everyday apps. Probably, these UI strings haven't yet been translated.
    Well this is the world we live in And these are the hands we're given...

  • How to distribute my windows phone 8 app and windows store app without publishing in the store

    How to distribute my windows phone 8 app and windows store app without publishing in the store
    any business license or enterprise license needed..
    I am a windows developer talking behalf of my company i.e  wipro
    I have a question about the enterprise license   and  we are building an app for the limited users i.e our company employees and users and we do not want to publish in the store
    How to release the app?
    what are licenses etc needed?

    Hi,
    for developers distributing apps without Publishing in the Store, the sideloding Enterprise key license through volume licensing is required.
    Starting May 1, 2014, customers who want to enable sideloading will be able to purchase an Enterprise Sideloading key for $100 through the Open License program. 
    An unlimited number of devices can be enabled for sideloading using this key.
    thanks
    diramoh

  • Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

    Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Maybe you are looking for