Blackbrry Q5 Camera does not start

Hi. I recently bought a Q5 and from the beginning the camera would not work...I used to get an error saying "the camera can't be started" I then submitted it to the authorized service centre & they said it was a software issue & proceeded to upgrade my phone to 10.2.1.2102 post which my cam started working (for about 10 days)
However suddenly yesterday I got the same error message back & my cam is non-functional again
Why is this happening?Is it still a software issue?I'd like to mention that I installed my micro Sim card only yesterday & prior to this when there was no sim card the cam was working fine. Dunno whether it's related but that's the only change i made to the phone. Please advise

The SIM card shouldn't have any affect on the camera, but for a test, please remove the SIM card, and reboot the device and see if the camera works?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Cssd does not start in non-RAC environment Thus we can not bring up ASM

Non-RAC environment
ASM version = 11.1.0.7
HP-UX Itanium 11.23
After power outage, CSSD does not start on non-RAC environment
Running as root "/sbin/init.d/init.cssd start" does not start cssd
Oracle support tried "$ASM_HOME/bin/localconfig delete" and "$ASM_HOME/bin/localconfig add"
but it did not start CSS
Oracle support tried "$ASM_HOME/bin/localconfig reset $ASM_HOME"
It started the CSSD and the "crsctl check css" came back with CSS is healthy
But around 1 minute later it rebooted the server and when it came up again CSS does not start.
They checked /etc/inittab and it looked fine.
Before the reboot we saw this message in the /var/adm/syslog/OLDsyslog.log:
Cluster Ready Services completed waiting on dependencies
Again it is a NON-RAC environment. We only need CSSD for ASM. We do not have CRS installed on this server.
Our test system has been down for a week and we did not get the resolution from Oracle support yet !
Any pointers are greately appriciated.
Thanks,
Dzung

Here is the message in $ASM_HOME/log/<hostname>/alert<hostname>.log :
2010-07-16 09:42:02.956
[client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
2010-07-16 09:42:02.971
[client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
2010-07-16 09:42:03.054
[client(11930)]CRS-1013:The OCR at /db/app/oracle/product/11.1/cdata/localhost/local.ocr was successfull
y formatted using version 2. Ignore earlier CRS-1006 messages if any.
2010-07-16 09:42:46.379
[cssd(12297)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rmodbd01 .
Here is the message in $ASM_HOME/log/<hostname>/cssd/cssdOUT.log:
setsid: failed with -1/1
s0clssscGetEnvOracleUser: calling getpwnam_r for user oracle
s0clssscGetEnvOracleUser: info for user oracle complete
07/16/10 09:42:36: CSSD starting
Here is the message in $ASM_HOME/log/<hostname>/cssd/ocssd.log:
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 7, from 6, changes 6
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmSetVersions: properties common to all peers: 1,2,3,4,5,6,7
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmEstablishMasterNode: MASTER for 174732166 is node(0) birth(174732166)
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 8, from 7, changes 7
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 9, from 8, changes 8
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 10, from 9, changes 9
[    CSSD]CLSS-3000: reconfiguration successful, incarnation 174732166 with 1 nodes
[    CSSD]CLSS-3001: local node number 0, master node number 0
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssscSAGEInitFenceCompl: Completing kgzf fence initialization
[    CSSD]2010-07-16 09:42:46.394 [12] >TRACE: clssgmUpdateEventValue: Client listener incarn val 174732166, changes 1
[    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c7120) allocated
[    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c73a0) allocated
[    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user oracle
[    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user root
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7120 - 1,2,3
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2810) proc(60000000003c7120) pid(12350) version 11:1:1:4
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c73a0 - 1,2,3
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c73a0) pid(12131) version 11:1:1:4
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(1/600000000096e7c0)
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e7c0)
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmJoinGrock: local grock CSS_INTERNAL_NODE_GROUP new client 600000000096e7c0 with con 60000000003b2b10, requested num 0
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmAddNodeGrpMember: member (60000000009e0030) added
[    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
[    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
[    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDeadProc: proc 60000000003c73a0
[    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c73a0) con(60000000003b2990) skgpid ospid 12131 with 0 clients, refcount 0
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of unknown group MASTER#DISKMON#GROUP
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of group MASTER#DISKMON#GROUP, member count 0
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: KGZF: context successfully initialized, API version 1.4, using pipe default
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: CSS/GM open for global group registrations
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: completed for reconfig(174732166), with status(1)
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmUpdateEventValue: Reconfig Event val 2, changes 2
[    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmWaitOnEventValue: after Reconfig Event val 2, eval 2 waited 47
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(2/600000000096e870)
[    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmUpdateEventValue: Reconfig Event val 0, changes 3
[    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmStartNMMon: previous reconfig complete, incarnation(174732166)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP#MX new client 600000000096e870 with con 60000000003b2990, requested num -1
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP#MX
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/MASTER#DISKMON#GROUP#MX)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmQueueGrockEvent: lockName(MASTER#DISKMON#GROUP#MX) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmCommonAddMember: global lock grock MASTER#DISKMON#GROUP#MX member(0/Local) node(0) flags 0x2 0x2
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(3/600000000096e920)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 3 (600000000096e920)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP new client 600000000096e920 with con 60000000003b2bd0, requested num 0
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: new master 0 for group(MASTER#DISKMON#GROUP)
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group MASTER#DISKMON#GROUP, death 1, SAGE 0
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: member (0/60000000009e0230) added. pbsz(72) prsz(0) flags 0x0 to grock (600000000098a170/MASTER#DISKMON#GROUP)
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmQueueGrockEvent: groupName(MASTER#DISKMON#GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x78, state 0x0
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmCommonAddMember: global group grock MASTER#DISKMON#GROUP member(0/Local) node(0) flags 0x0 0x1e00
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock MASTER#DISKMON#GROUP#MX, member 0
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock MASTER#DISKMON#GROUP#MX
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmRemoveMember: grock MASTER#DISKMON#GROUP#MX, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
[    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:58.354 [12] >TRACE: clssgmAllocProc: (60000000003c7ee0) allocated
[    CSSD]2010-07-16 09:43:58.355 [14] >TRACE: Connect request from user oracle
[    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7ee0 - 1,2,3
[    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c7ee0) pid(13157) version 11:1:1:4
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(1/600000000096e870)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_GROUP new client 600000000096e870 with con 60000000003b2c90, requested num -1
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_GROUP
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: new master 0 for group(CLSSSCHECK_GROUP)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group CLSSSCHECK_GROUP, death 1, SAGE 0
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: member (0/60000000009e0130) added. pbsz(8) prsz(8) flags 0x0 to grock (6000000000989e50/CLSSSCHECK_GROUP)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmQueueGrockEvent: groupName(CLSSSCHECK_GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x0, state 0x0
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmCommonAddMember: global group grock CLSSSCHECK_GROUP member(0/Local) node(0) flags 0x0 0x0
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 1 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 1 (600000000096e870), grock CLSSSCHECK_GROUP, member 0
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_GROUP
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_GROUP, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 2
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(2/600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_LOCK new client 600000000096e870 with con 60000000003b2c90, requested num -1
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_LOCK
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/CLSSSCHECK_LOCK)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmQueueGrockEvent: lockName(CLSSSCHECK_LOCK) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmCommonAddMember: global lock grock CLSSSCHECK_LOCK member(0/Local) node(0) flags 0x2 0x2
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock CLSSSCHECK_LOCK, member 0
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_LOCK
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_LOCK, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
[    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDeadProc: proc 60000000003c7ee0
[    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c7ee0) con(60000000003b2990) skgpid ospid 13157 with 0 clients, refcount 0
[    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
[    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
Here is the message in $ASM_HOME/log/<hostname>/diskmon/client.log:
[ DISKMON] 07/16/2010 18:33:32.050 dskm_send_command: process 23246 sending command 8 to master diskmon listening on default pipe
[ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: skgznp_connect failed with error 56815
[ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Connection refused
Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmonOUT.log:
setsid: failed with -1/1
dskm_getenv_oracle_user: calling getpwnam_r for user oracle
dskm_getenv_oracle_user: info for user oracle complete
07/16/10 18:33:31: Master Diskmon starting
Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmon.log:
[ DISKMON] 07/16/2010 09:42:35.573 dskm main: starting up
[ DISKMON] 07/16/2010 09:42:35.588 [12350:3] dskm_rac_thrd_main: running
[ DISKMON] 07/16/2010 09:42:35.588 [12350:1] dskm_rac_thrd_creat2: got the post from the css event handling thread
[ DISKMON] 07/16/2010 09:42:35.589 [12350:1] dskm main: startup complete
[ DISKMON] 07/16/2010 09:42:35.589 [12350:1] listening on -> default pipe
[ DISKMON] 07/16/2010 09:42:35.792 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:36.385 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:36.906 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:37.426 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:37.945 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:38.465 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:46.376 [12350:1] dskm_slave_thrd_creat: thread created
[ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_slave_thrd_main1: slave 0 running
[ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_process_msg5: received msg type KGZM_IDENTIFY (0x0001)
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_identify8: client kgzf/12297, version 0x01020000, slave 0, reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=0,gin=0,gmn=0,umemid=0,opid=0,opsn=0,lvl=node
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version1:
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version4: done
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_IDENTIFY (0x0001), retcode 0
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg5: received msg type KGZM_KGZF_HANDSHAKE (0x0010)
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_kgzf_handshake3: client kgzf/12297, kgzf version 0x00010004, slave 0
[ DISKMON] 07/16/2010 09:42:46.401 [12350:3] dskm_clss_ini2: successful clsssinit(), clssvers 2.1
[ DISKMON] 07/16/2010 09:42:46.402 [12350:3] dskm_clss_ini12: node rmodbd01 (0) registered in cluster
[ DISKMON] 07/16/2010 09:42:46.403 [12350:3] dskm_reid_ini12: diskmon reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=-1,gin=-1,gmn=-1,umemid=-1,opid=12350,opsn=1279291355,lvl=process
[ DISKMON] 07/16/2010 09:42:46.424 [12350:3] dskm_sage_config: CELL storage configuration file cellinit.ora not found
[ DISKMON] 07/16/2010 09:42:46.425 [12350:3] dskm_nfy_kgzf1: notified thread kgzf enabled
[ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake5: got the post from the hb thread
[ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake9: done, kgzf enabled
[ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_KGZF_HANDSHAKE (0x0010), retcode 0
[ DISKMON] 07/16/2010 09:42:46.426 [12350:3] dskm_rac_ini22: CELL storage not configured in the cluster; registered in group MASTER#DISKMON#GROUP as memno 0 (GSDGRPSZ 512)

VIPCA does not start from root.sh

Hi all,
I've a problem in installing RAC 10g on ia64 architecture.
S.O.: RH Enterprise Linux AS 2.1
Oracle CRS install completed successfully.
The problems came up during DB installation when I need to run root.sh script that should automatically invoke VIPCA.
Here's what I see when I execute root.sh. :
[root@rx5670 root]# /u01/app/oracle/product/10.1.0/db_1/root.sh
Running Oracle10 root.sh script...
\nThe following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.1.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
\nCreating /etc/oratab file...
Adding entry to /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Exception in thread "main" java.lang.UnsatisfiedLinkError: allocHASContext
at oracle.ops.mgmt.has.HASContextNative.allocHASContext(Native
Method)
at oracle.ops.mgmt.has.HASContext.<init>(HASContext.java:93)
at oracle.ops.mgmt.has.HASContext.getInstance(HASContext.java:223)
at oracle.ops.mgmt.has.ClusterUtil.<init>(ClusterUtil.java:46)
at
oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:164
at
oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:213
at oracle.ops.mgmt.cluster.Cluster.getNodes(Cluster.java:267)
at oracle.ops.vipca.VipCA.getNodeList(VipCA.java:532)
at oracle.ops.vipca.VipCA.processGUIArgs(VipCA.java:242)
at oracle.ops.vipca.VipCA.runApplication(VipCA.java:2141)
at oracle.ops.vipca.VipCA.main(VipCA.java:2423)
[root@rx5670 root]#
Thanks a lot,
Simone

CSSD does not start (Cluster Manager)
CSSD does not start (Cluster Manager)

Macbook does not start

Greetings. This is my issue:
I don't know why the macbook does not restart, if you try to restart it, it comes to black screen and i had to press the power button twice (Turn it absolutely off and turn it up), i took it to an apple authorized service center and he put an external HDD and restart it from this HDD then restart my macbook and it restarted normally, a few days later the problem persist.
Now the big deal: I turned it on, open safari and immediately it comes black screen and the status white led start blinking, i press the power button and stop blinking and press it again but it does not start, the blinking comes again... I left it off for an hour or so.
One hour later it boots normally but in few seconds it freezes and becomes a message in the screen that reads: " You need to restart your computer. Hold down the Power button for several seconds or press the Restart button". Then i press the power button, when i tried to restart it again there came a lot of strange stripes in the screen, gray and black with some color dots, a very weird thing, the "Start up chime" sounds about tree times and the stripes keep changing, always stripes. I restart it again, and the same thing happens one more time, and the third time i restart it it does not show anything on screen, all black and no sound, i tried putting out battery and everything Apple says to do when macbook does not boot, but nothing happens... i press the power button the sound of the HDD (I guess) that always sound, i can hear it, and the status white led is on, but not blinking, but nothing else....
what should it be?
it is a late 2007 macbook and out of warranty, does not have apple care.

This is what the last Kernel Report says:
Thu Jul 23 09:27:51 2009
panic(cpu 0 caller 0x00195080): "pmapremoverange empty hash removing hashed pv"@/SourceCache/xnu/xnu-1228.12.14/osfmk/i386/pmap.c:2072
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2107fbf8 : 0x12b4c6 (0x45ec20 0x2107fc2c 0x13355c 0x0)
0x2107fc48 : 0x195080 (0x4651d0 0x32cfab0 0x4e33c80c 0x10000)
0x2107fcf8 : 0x1972db (0x32cfa6c 0x1000 0x0 0x105e008)
0x2107fd58 : 0x16abc5 (0x32cfa6c 0x1000 0x0 0x2000)
0x2107fe78 : 0x16b18d (0xffe00000 0x0 0x0 0x0)
0x2107feb8 : 0x13bb81 (0x32b9aa8 0x0 0x0 0xffe00000)
0x2107ff08 : 0x376f2a (0x29b770c 0x0 0x2107ff58 0x19c6b3)
0x2107ff58 : 0x376f58 (0x2c8be44 0x0 0x3169404 0x0)
0x2107ff78 : 0x3e2e3b (0x2c8be44 0x31693c0 0x3169404 0x1213)
0x2107ffc8 : 0x1a1bfa (0x3165520 0x0 0x1a40b5 0x3174208)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffffee8
BSD process name corresponding to current thread: scsid
Mac OS version:
9J61
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CA9)
System uptime in nanoseconds: 18167463710
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.InternalModemSupport 2.4.0 - last loaded 17433441031
com.apple.iokit.IOBluetoothSerialManager 2.1.6f8
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.driver.AppleHDAPlatformDriver 1.6.8a3
com.apple.driver.AppleHDA 1.6.8a3
com.apple.DontSteal_Mac_OSX 6.0.3
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AppleGraphicsControl 2.8.11
com.apple.driver.AppleIntelGMAX3100 5.4.4
com.apple.driver.AppleIntelGMA950 5.4.4
com.apple.driver.AirPort.Atheros 319.10.3
com.apple.driver.AppleHDAController 1.6.8a3
com.apple.driver.SMCMotionSensor 2.1.1d2
com.apple.driver.AppleIRController 110
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.ACPISMCPlatformPlugin 3.4.0d10
com.apple.driver.AppleLPC 1.2.12
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.driver.AppleIntelIntegratedFramebuffer 5.4.4
com.apple.driver.CSRUSBBluetoothHCIController 2.1.6f8
com.apple.driver.AppleUSBMergeNub 3.4.3
com.apple.driver.CSRHIDTransitionDriver 2.1.6f8
com.apple.driver.AppleUSBTrackpad 1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOAHCIBlockStorage 1.2.1
com.apple.driver.USBCameraFirmwareLoader 1.0.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.0.9
com.apple.iokit.SCSITaskUserClient 2.0.9
com.apple.iokit.IOATAPIProtocolTransport 1.5.2
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleIntelPIIXATA 2.0.0
com.apple.driver.AppleFWOHCI 3.8.2
com.apple.driver.AppleAHCIPort 1.6.0
com.apple.driver.AppleUSBHub 3.4.0
com.apple.iokit.IOUSBUserClient 3.3.1
com.apple.driver.AppleUSBEHCI 3.4.3
com.apple.driver.AppleUSBUHCI 3.3.5
com.apple.iokit.AppleYukon2 3.1.12b14
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleSmartBatteryManager 158.10.0
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.4
com.apple.driver.AppleACPIButtons 1.2.4
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.4
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.6.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.0.0
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.6.8a3
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOHDAFamily 1.6.8a3
com.apple.iokit.IOAudioFamily 1.6.9fc3
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0d10
com.apple.driver.AppleSMC 2.2.1d2
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleUSBBluetoothHCIController 2.1.6f8
com.apple.iokit.IOBluetoothFamily 2.1.6f8
com.apple.iokit.IOUSBHIDDriver 3.2.2
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.0.9
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.0.9
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOFireWireFamily 3.4.7
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOUSBFamily 3.4.3
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.4
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6

My imac does not start and asks for bootdisk

i bought a new imac and connected it with internet to upgrade the drivers. Power went off... and now imac does not start.
When it starts it asks for the boot disk and no boot disk came up with my mac.
Please help how can i reinstall mac.
thanks

None of the options work. I press the power on button keeping the option and R button pressed but the only option that appears is
First blank white screen appears as soon as i power on (option R is pressed) and then the following message
No bootable Device -- Insert boot disk and press any key
(Ethernet cable is connected but it does not go for internet recovery either)
No more activity.
Also if you can guide from where I can download OS X Lion for reinstalling it to the imac, please.
Does every mac come with a restore/bootable disk or not? We ordered two macs but did not get any disk with any of them.
Anxiously waiting for help....

MY PHONE DOES NOT START

SERIAL NO 88*******Y7H
MY PHONE IS SWITCH OFF AN DOES NOT START
<E-mail Edited by Host>

Hi shailendrafromgwalior,
If your iPhone won't turn on, you may need to plug it into to a electrical outlet using the charger and power cable that originally came with the phone for 10 - 20 minutes. Here is some additional information.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
http://support.apple.com/en-gb/HT201412
If your iPhone, iPad, or iPod touch doesn't turn on
Your device might not start up correctly, or it might not respond when you press buttons. These steps can help.
If you see a black screenYou might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. Get more helpIf you still need help after trying the steps above, contact Apple Support.
Last Modified: Jan 14, 2015
I hope this information helps ....
- Judy

Portal does not start after RI installation

Hi,
we installed the EP 6 with the RI. The installation went through all steps without problems.
At the end, when the portal should come up, the server does not start. The only message I receive in the trace log is:
arguments   :
    arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_svrsapep6
    arg[02] : -DSAPINFO=J2E_00_server
    arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_svrsapep6
[Thr 2892] Mon Apr 25 13:41:29 2005
[Thr 2892] *** ERROR => Invalid property value [box.number/J2EJC00svrsapep6] [jstartxx.c   808]
[Thr 2892] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   808]
What may be the reason for this and how can we fix this in a way that the server will startup properly?
Thanks in advance

Hi,
the error message didn't mean anything. The only problem was that the JVM had a to high memory setting. We were running the portal in a VMWare with just 1.5 GB RAM. When we changed the amount of the heap memory size in the configtool, the portal came up.

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

SQL Developer 1.1.3 does not start from NT

We were previously running 1.1(2514) and have just started rolling out 1.1.3 (2766) and have found that the latest version does not start under NT. Error shell32.dll error.
Is there a fix / workaround as this will stop our rollout of this version, which has some interesting BUG fixes ?

I thought so too, but just a couple of months ago Brian added another bug for NT in Re: Sqldeveloper failed to start after latest 1.1.2 Patch .
Doing the search I also came across Sue's more official response in Support for Windows NT? . However that post was over a year old...
K.

PC does not start

Hi, the PC was running normal for a few months and suddenly when switching it on the next time it does not start anymore at all.
No leds of D-Bracket lights.
Changed PS with known good and higher Wattage but still nothing.
When taking off the ATX12V power connecter and switching on the PC again, the only thing happening is that the CPU cooler fan is moving, nothing else, no leds or anything else.
Any idea of what could be the reason and/ or of what could be faulty? CPU, MB .....
Thanks
MB MSI K8T Neo MS-6702
Bios which came with MB
AMD Athlon 64 +3000
512Mb Memory
Etec FX 5700
PS ?, 300W, 3.3V 22A; 5V 30A; 12V 14A
2 x SATA 160GB Maxtor mounted Raid0
MSI DVD reader
DVD burner Liteon
MS 2000 Prof latest service pack

Well anything could have broke. Here are some items to try. Reset the Cmos with the jumper (make sure to remove power from the computer first). Reseat the RAM, Reseat cards. Remove anything not needed to boot. What you want to do is to isolate things to the least amount of componatns. Then whatever is left the problem would be likely in that group of componants.

I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

After uptade to ios5 my camera does not work

after uptade to ios5 my camera does not work

I have the same issue. I upgraded to ios5 then the camera was frozen and no longer works. I took it into an Apple store and they said I had some hardware damage that look to be consistent with moisture getting in through the headphone jack. I accepted that answer and went on my way since my warranty was over 100 days past and I did not feel like paying $100 for a repair with the 4s upgrade avaible with my account soon. I started to look at some other apps that use the camera, the Facebook photo share in the FB app, the amazon bar code scan, camera+ and they all work. There is definitely some kind of software bug with ios5, based on my experience, that freezes the camera. I would suggest taking it into apple to have it looked at or just using a camera app like camera+ to take pictures.

Pages does not start any more

Hello
I have a macbook pro running Mac OS X 10.6.8 and I just updated my macbook software and now pages does not start. I double click on the icon and it does not start.
I have tried to open some pages documents and it open unarchiver.
Can someone help?
It was working a couple of days ago I am sure.
Thanks in advance
Ozzy

Hi
Thanks everyone for the input.
I tried all this but nothing worked, then I have tried to reinstall pages from the Iwork 09 disc.
Then pages came up but now it i get this error message
Pages cannot be opened because of a problem
Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for hte application and Mac OS X.
This report will be sent to Apple Automatically.
Comments
Problem details and system configuration
Process:         Pages [1333]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         ??? (???)
Build Info:      Pages-7660000~4
Code Type:       X86 (Native)
Parent Process: launchd [109]
Date/Time:       2013-09-24 22:59:46.631 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          950866 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      3A35CCB0-5BFE-4847-A949-31633205D0DA
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
Referenced from: /Library/Application Support/iWork '09/Frameworks/SFCompatibility.framework/Versions/A/SFCompatibility
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: MATSHITADVD-R   UJ-898, 557.1 MB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000 / 6
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000 / 2
Can any one help?

Smartwatch 2 not working (update does not start, SW is stuck)

Hello. I just bought SW2. I turned on NFC on my phone and placed SW2 on the back of my phone. Phone and SW2 made connection. SmartConnect was installed on my phone BUT then it wants me to install SW2 app (release date 13.12.2013). OK it installs the SW2 app and then progress bar appears on my SW2 and thats it. No progress at all. Phone just saying "downloading updates to SW2" but never starts. I waited two hours but nothing happend.
I try to describe averything I have tried in detail, hoping so that someone can help me.
I tried to use Sony Mobile Update service. I connected SW2 to my PC and Sony Mobile update service said that there is update available. So I do the update, SW2 restarts BUT then all starts over again. SW2 app is still trying to download updates but nothing happens. I tried to uninstall everything and reinstalling SmartConnect and SW2 app but that did not help.
Then I used someone elses phone. I connected SW2 with other phone than mine, pairing worked, SW2 app managed to install the updates (this is where i got stuck with my phone) on SW2 and everything worked. Then I did reset on the SW2 and paired with my phone again. Pairing seems to work. Phone says that SW2 is connected BUT nothing really works. No notifications, facebook app does not show anything. Smart Music Player does not work, Smart Camera does not work. When I click on any app that needs to interact with my phone, a "waiting bar" appears for a few seconds and then nothing, silence. Whe I turn off the bluetooth on my phone, the SW2 app says that SW is disconnected and then I trun on the bluetooth, then it connects again. SW2 and phone seems to be connected but it seems that no information is moving between them. And then there is the battery drain. When SW2 and phone are "connected", the battery on my phone lasts about 3 hours max.
So I tried the Sony Mobile Update service again. Suprisingly. update was available, even tough I did the update befoe AND with my friends phone. So i do the update again and now I am back where I started - my SW2 and phone are "connected" and SW2 app wants to install updates to SW2 but the downloading process does not start and I can not use SW2 without it. So I need my friends phone again just so that I can use SW2 as a regular watch.
My phone:
LG-P940 (Prada 3.0)
Android 4.0.4 ICS
I have heard that people with LG phones are experiencing the same issue...

It seems that we are suffering from the same problem I also have an LG phone aswell.

Camera does not write to SD card

Since mid-October my phone no longer saves photos to my SD card. I am able to save photos directly to my internal memory. My operating system is Android KitKat 4.4.4. I have 49 GB of space on my SD card so space is not an issue. How can I get the camera to save to my SD card again, since that is obviously where most of my free space exists?

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Blackbrry Q5 Camera does not start

Similar Messages

Maybe you are looking for