Blackmagic Decklink audio problems

I've got two macs exhibiting identical problems. The decklink card will not play out audio unless FCP is running and in the foreground. For example, I can play a song in itunes and I hear nothing. If I cmd-tab to FCP, then I can hear the song. The same goes for all applications except for FCP (Safari, Soundtrack Pro, DVD player, etc).
Settings are correct in System Prefs: all audio plays out of Decklink Audio.
I am currently using driver 6.6.2 for the decklink, but I downgraded to 6.1 and nothing changed. (And then upgraded back)
Mac Pro 2 x 2.66
4GB RAM
Decklink Pro HD (Dual Link)
OS X 10.4.11
FCP 6.0.2
All updates current except QT 7.3.1
These are new builds with the Decklink cards, so the audio problem has always existed in these two Mac Pros.
Anybody out there run into a similar problem?

Sounds like you've done all the right things, so one would assume the Decklink would work for audio playback of other than FCP projects. I'd suggest you post this in the Decklink forum at http://www.creativecow.net
There are a LOT of Decklink users there, and maybe there's a fix for you.
Jerry

Similar Messages

AE CC 2014 and Blackmagic Decklink AUDIO not available in preferences

Hi
I have a Decklink HD Extreme 3D+ installed in an Apple Mac Pro, 12-core, OSX 10.8.5.
I also installed Desktop Video 10.1.2.
In AE CC 2014 the card is available for VIDEO and works.
But in the audio controls it DOES NOT APPEAR.
Can you pleas help me?
Thanks.
Regards,
Uli

Hi Tim
Attached I send you:
OSX, Audio Midi Setup where the BM Outputs are available
AE2014, Video Preview, where the BM card is available and working
AE2014, Audio Hardware, where the BM outputs are missing
AE2014, Audio Mapping, where the BM are missing as well, because they're not in Audio Hardware
Thanks for your help
Best regards,
Uli

Can't playback on Blackmagic Decklink HD extreme 2

Hi all,
I am looking to crossgrade from FCP7 to Premiere CS6 so I have the Master Collection Demo installed on my work station along with FCP. It's on a 2008 Mac Pro with 2 Quad core 3.2G Intel Xeons, 16GB ram, ATi 2600 HD 250mb graphics and a Blackmagic Decklink HD Extreme 2. In the FCP set up this card fed a full HD JVC broadcast monitor via HD-SDI and I had no trouble with it at all and it played any type of sequence. My problem is that I can't for the life of me get a picture on the screen in Premiere. No combination of BM sequence settings or codecs, either BM or otherwise, seem to get it going. Output options seem extremely limited in the application set up with only one box to tick under the playback menu. This seems to have no effect whatsoever. The aplication can obviously see the card because the option to check it as a playback is there and the audio routes through without error. I have installed the latest Premiere updates and am running Desktop video 9.6. AE plays on the monitor fine but nothing in Premiere unless I switch the BM card to extended desktop and use the broadcast monitor as a second LCD and tick that option under the playback menu but then my GFX card seems to struggle and drops frames all over the place. I admit the ATI card is a bit of a slouch but options were limited for Mac unless you want the high end cards, which I am considering, could the fact the card is under powered have anything to do with video not getting to the BM card. I don't know much about the MPBE apart from the fact my card doesn't qualify.
Any ideas on how to proceed would be greatly appreciated.
Apart from no client monitor I'm loving Premiere, I'm finding th realtime stuff quite refreshing after FCP, which was a bit of a joke really in that area...but if I can't monitor, I can't make the switch.
Thanks in advance.

Hello,
You don't need to use the blackmagic presets to play back through your card. What are your settings under preferences>general?playback? You might want to try uninstallig the blackmagic presets and installing the latest Deskstop from BM. The uninstall option will be available when you download BM Desktop from their support site. Having the latest version isn't what is important but uninstalling is.
Cheers,
Gerry

Blackmagic Decklink Studio - No signal in FMLE

Hi. We are trying to set up a live webcast with Flash Media Live Encoder 3.2.1.1122 using a Mac Pro OSX 10.9 and a Blackmagic Decklink Studio card 9.9.3. This has worked in the past but upon setting it up recently, we've noticed that no picture or audio is coming through. We know the card works as the picture and audio come through perfectly in Blackmagic Media Express software. FMLE recognises the device but just shows a black screen. We've checked the settings and re-installed/updated all the software. Are we missing something? Thanks for your help!

Hi Pi,
Did you manage to resolve the problem? We're having similar issue. BM Media Express software recognises the card, but FMLE just reports it as Decklink and gives a blank input display. Any attempt to change settings causes FMLE to crash.
Thanks,

Premiere CS4 4.1 and Blackmagic Decklink

I've loaded CS4 4.1 along with the latest Blackmagic Decklink 7.2 update software. I can see my timeline playing on my production monitor but I have no audio. If I load a clip into a new project using just the DV-NTSC 4:3 option then I get audio but I don't see my playback on my production monitor. If I select new project and select the Blackmagic DV-NTSC 4:3 option then I see the playback on the monitor but I get no audio. I've tried to change the preferences in CS4 in the audio section to recognize the Blackmagic Audio output and still nothing. I've checked the Blackmagic audio drivers on my machine and they are recognized. Anyone have similar problem or ideas how to fix. Greatly appreciated.
Thanks

Have the same exact issues in our rig. Have the HD Extreme 3, with with our P6T7 WS SuperComputer MoBo with the intergrated SoundMAX HD audio and the Bose Companion 5 multimedia speaker system. I have contacted BM about this. Their support has been terrible to say the least. I have sent a couple emails in the past week with no response. I should have gone with the AJA Kona but thats another story. Our issue, which is similar to yours:
(my email to BM)
We have the HD Extreme 3 and we just purchased a Panasonic BT-LH1710 LCD reference HD monitor. We have it connected via BNC in the SDI on the monitor and out of the Extreme card in the first BNC slot (closest to the breakout cable input). We just shot footage with the Panasonic Varicam 2700 and if we choose DVCPROHD 720p from the presets in Premiere 4.1, we can view the material that is in the source monitor on the Panasonic but once we put on the timeline and thus program monitor, we cannot see the footage on the Panasonic reference monitor. If we choose from the Blackmagic presets it does work. Do we have to use the Blackmagic presets for our footage to be seen on our Panasonic monitor even though we should be using what we shot in, which in this case was DVCPROHD 720p 24fps P2?
-Answer to this from what I gathered from others is: "You must always use a Blackmagic Design preset when you create a new Sequence. You will never ever get any out put from any other Timeline" Which I really don't know how that effects the project when cutting, if at all since we are not capturing from the card (thus using BM's CODEC but rather, using footage shot from our Panny P2's.
Second issue is audio, even when using the blackmagic presets, we cannot hear audio. I have the settings all correct in Premiere and can see the levels moving, just can't hear anything out of our speakers. The audio works fine with our speakers in every other preset but Blackmagic's (if we choose Premiere Pro Sound as the Audio Hardware and Audio Output Mapping). Once we switch to Blackmagic, we do not hear any audio.
-Answer - I have tried everything and am still unsuccessful and getting audio to play out o our BOSE speakers. It does play (not well) our of the Panny reference monitor but am still searhing for a solution. Under control panel for audio, it does show blackmagic audio and working but nothing as of yet. Kind of driving me crazy.
If you read the third post down http://forums.adobe.com/message/1989667#1989667 from Roger he kind of touches on it but still doesn't solve the issue.
I'd be interested to hear if you have a solution or really anyone has a solution.

Understanding the way to connect a MDD to BlackMagic Decklink Extreme card

Hi,
I require some help in the following:
I recently bought myself a Blackmagic DeckLink Extreme™ with 10bit SDI/analog video and audio capture card.
Looking at the specs, http://www.blackmagic-design.com/products/sd/specs/, can someone give me directions as to the best setup I can do from the following sources and what other equipment I may require to achieve it.
- mono stereo audio VHS -> has 1 video/audio in and 1 video/audio out (composite connections)
- stereo audio video camera -> has 1 8 pin S-Video out port to composite connections (Hi8 tape type)
- DVD player -> has composite 2 x 2ch stereo audio out, 1 x 5.1ch stereo audio out, 2 x video out, 1x component video out, 2 x S-video out, 2 x digital audio out; 1 x RCA/OPT
- 2 x 23" monitors connected by ADC and DVI connections to a Apple MDD G4, may relay to 60" Plasma for video monitoring from video card prior to creating DVD final piece for playback.
Basically, I wanted to have multiple source inputs and outputs, but I'm having difficulty in understanding the setup. Please refer to http://www.blackmagic-design.com/downloads/connections/decklinkdiagram.pdf page 5/6.
I purchased the following from JayCar
- 6 x PA3655 ADPT PLG RCA:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=PA3655&CATID=& keywords=PA3655&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
- 1 x AC1668 SWITCH AV 3WAY:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=AC1668&CATID=& keywords=AC1668&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
What other devices do I need to set up the equipment in the following way:
<pre>
Computer ------- Video In + Stereo In -----------> 3WAY SWITCH BOARD
| | ^ ^ ^
| | | | |
Bigpond |---- OUT ---> TV --------|-----|-----|
(Satellite Internet) | | | |
FOXTEL DVD VCR V/CAM
(Satellite TV)
</pre>
Currently I have not succeeded.
I have just done a simple test like so:
<pre>
Computer ------- Video In + Stereo In ---------> DVD (*)
|
Bigpond
</pre>
(*) Tested using the following:
<pre>
From Decklink -- Y IN (from deck) --> DVD Y port
-- B-Y IN (from deck) --> DVD Pb port
-- R-Y IN (from deck) --> DVD Pr port
-- SDI IN (from deck) ---> DVD Digital audio out
ASWELL AS
From Decklink -- Y OUT (from deck) --> DVD Y port
-- B-Y OUT (from deck) --> DVD Pb port
-- R-Y OUT (from deck) --> DVD Pr port
-- SDI OUT (from deck) ---> DVD Digital audio out
</pre>
Not one has seemed to work. What am I missing here?
Thanks
Tiberius
PPC MDD Dual Boot/Dual 1.25GHz Mac OS 9.2.x 2 x 23" Apple HD Display, 2GB RAM, 2x150GB + 1x1TB HD

pomme4moi wrote:
I want to buy a hard disk (not a NAS device) and plug it into my Airport Extreme in order to share data between two Mac computers, and to stream iTunes content to my Apple TV.
One option is to purchase a hard drive (say, a 2TB Hitachi G-Technology drive) and connect it to the USB port on the back of the Apple Extreme. The other option is to purchase a drive with an ethernet connection (say, a 2TB Lacie drive) and connect it to an ethernet port on the Apple Extreme.
In the second case what you'd have actually is a NAS. Apple's AirPort routers aren't known for fast file sharing. The NAS option might be faster.
Is either option better for streaming movies from the hard drive to my Apple TV?
I could be wrong, but an AppleTV may not be able to access content directly from a network drive. It may require that a Mac serve as an intermediary.

Playback Issues with multiple framerates and Blackmagic Decklink 4K Extreme

I recently swapped by AJA Kona Card for a Blackmagic Decklink 4K Extreme in order to get external monitoring in DaVinci Resolve.
I'm working in a 1080p 23.976 project that includes some 29.97 SD and HD footage. When loading this 29.97fps footage into my source footage, I periodically encounter frozen playback (The play triangle in my toolbar becomes a square symbol and remains that way). From there I am unable to playback any footage in any timeline, and requires a full system shutdown to return to normal! The problem is seemingly intermitent, with successful playback happening sometimes.
The 29.97 footage was DVCPRO, I attempted to transcode to Prores to troubleshoot. No dice. I believe it to be an issue related to the Decklink's inability to handle multiple framerates on-the-fly but wanted to submit here, too. I've also experienced intermittent sync delays on my broadcast monitor.
Decklink Driver 10.0
Premiere CC 7.2.1
Mac OSX 10.9.2 (same problem pre-mavericks)

Hi Andy,
You should not have any issues with Blackmagic handling multiple formats on the fly. However, I believe the frozen playback issues your describing is related to the Desktop Video 10 driver. I suggest rolling back to 9.3.3 for the time being. Blackmagic is looking into this issue now.
Best,
Peter Garaway
Adobe
Premiere Pro

Capturing device offline with BlackMagic DeckLink Quad

Hi guys,
I have a problem capturing with a BlackMagic DeckLink Quad and Premiere Pro CS6. Capturing with the Blackmagic included Media Express software works fine. However, Premiere Pro tells me that my capturing device is offline.
What I did to run the capture:
Open Premiere Pro CS6
New project --> set capture to Blackmagic capture --> press ok
New sequence dialog --> select format exactly like specified in system control panel of BlackMagic (1080 25p).
Open capture dialog with F5 key.
Tells me that the capturing device is offline.
Controlling capturing properties for Blackmagic Capture and ensuring that they match the system control panel specs and the specs used in the other software(1080 25p, Video Format: Motion JPEG)
Final State --> Premiere Pro still tells me that the capturing device is offline and I have a black window.
I read somewhere that the installation order of driver and Premiere Pro is important, therefore I tried already both constalations (Driver, Premiere Pro - Premiere Pro, Driver ) without any success. A driver update of the Declink Quad did not have any effect.
Driver version:
Blackmagic DeckLink SDI - Date: 22.01.2015 Version: 13.4.10.868
Any help would be highly appreciated.
Best

Yes, Component is indeed not a better quality... Interesting because I did plug into a flatscreen, and I have nothing as well... So maybe it is the component out of the z1u that is not even working! Will try with another cable in case, but that may be the answer... Thank you for pointing that out! didn't even think about it...
I'm really trying to capture old HDV tapes, and always get those phantom breaks with Firewire (using another deck since it's broken on the z1u), now I'm wondering if you get less breaks doing 1080i or ProRes?? Although files are way bigger.

Two BlackMagic DeckLink SDI Cards in FMLE

Is it possible to run two BlackMagic DeckLink SDI cards in two separate instances of Flash Media Live Encoder?
I can run one fine, but if I try to select the other, even if card # 1 [Decklink Video Capture in FMLE] is not in use, card #2 [Decklink Video Capture (2) in FMLE] only shows black. I have verified that video signal is working. Finally I installed Wirecast Demo to test if it was software and sure enough it works fine in Wirecast, each card shows the video fine.
I contacted BlackMagic and they stated it was the software. I have successfully done this with Viewcast Cards but now that we went HD BlackMagic are cheaper, but so far no luck in FMLE.
I would appreciate any isnight on this issue.
Thank you!
-Nate

Hi Pi,
Did you manage to resolve the problem? We're having similar issue. BM Media Express software recognises the card, but FMLE just reports it as Decklink and gives a blank input display. Any attempt to change settings causes FMLE to crash.
Thanks,

Audio Problem since upgrading to Mountain Lion

Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though.

Can Apple fix the 12 bit audio problem once and for all?

I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike

Blackmagic Decklink card not showing up in Playback settings

Just upgraded to Premiere Pro CC - my Blackmagic Decklink card is not showing up in the Playback settings box.

Hi Peter - thanks for responding - yes I did install the latest drivers - but finally found a thread that solved the issue. Turns out Blackmagic installs the drivers in its own Adobe folder - but Adobe only wants to see them in its own special folder (Application Support>Common>Adobe). Once I moved everything from the one folder to the other, then Premiere could see the card just fine. They should be definitely look at a better way of dealing with this - so it doesn't become an emergency science project for people like me.
Anyway, case closed - for now. Thanks.

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

Audio Problems in Adobe Presenter: Help Needed Urgently!!

I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
Yogini

This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

Blackmagic Decklink audio problems

Similar Messages

Maybe you are looking for