Blackmagic hyperdeck studio pro bad video with FMLE

I'm using a Blackmagic Hyperdeck Studio Pro over thunderbolt to get video into my iMac. Using the Ustream interface, the incoming video looks perfect. But using Adobe FMLE, it looks pretty terrible. Jerky motion, all sorts of graininess and noise. Any ideas? I've tried just about every FMLE setting I can try.
Also, sort of OT to the above issue...anyone know of a way to run 2 instances of FMLE on the same Mac?

There is no way on a Mac laptop to run two instances of FMLE and make it work with a single video input source. Its not the software, as much as it is a hardware sharing resource conflict.
You could build a PC and install a single Viewcast Osprey Video Card that has SimulStream software enabled (700e). Or simply install two identical cards in a PC box. We do this in my commercial webcast oprations here in Silicon Valley. Takes a Core i7 box to run 2 or even 3 instance of FMLE with HD inputs. Dual core anything can barely run standard def encodes safely.
Harvey Louie
EventCG

Similar Messages

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

Is DVD Studio Pro 4 compatible with Snow Leopard 10.6.8?

Is DVD Studio Pro 4 compatible with Snow Leopard? Project burns fine, simulates fine, works on my two macs (mac pro & macbook pro networked) but when I put the dvd in to a dvd played hooked to a tv it doesn't recoginize it and says "this disc connot be played"!

It's your set top DVD player that won't play the disk... That or it's the type of disk that you're using.
Make sure it's a DVD-R. That's a MINUS.
They pretty much work in all set top DVD players.
The reason your computers play the dvd's is simply because your computer knows what to do with all types of media. Something else to consider could be the optical read capability on your computer is better than that of your DVD player. Perhaps the DVD is a poor quality disk. You computer can read it because it has a higher quality optical pickup unit.
First things first, take your DVD to a place that sells DVD players and try it in a new player. That'll tell you whether or not the disk actually works.
HTH
-Graham

DVD studio Pro 2 work with intel processor?

Will DVD studio Pro 2 work with my new IMac, 2.4 Ghz intel core Duo processor?

No
http://www.kenstone.net/fcphomepage/dvd_sp_2_basicmode.html

AVI Files in DVD Studio Pro come out with no sound

I tried putting some AVI files through compressor and then into DVD Studio Pro only...no sound. I've been told I should convert the files but I was wondering if there was any other way I could go about making DVDs out of these AVIs that would play on any player. Why is there no sound? How I make sure there is sound? Totally lost in this instance and any help would be appreciated. Thank you all.

My guess is that you may have the sound files, but not spotted them...
When you encode your video with Compressor it splits out the sound form the video, making 'elementary' streams for DVDSP. This is perfectly normal. In compressor, if you apply a standard preset for encoding you get to choose what sort of audio you want. If you didn't set up your audio encode then you may only have the video after all.
If so, go back to compressor and re-encode and make sure you get the audio out - in AC3 format. Bring that into DVDSP and all will be well.

DVD Studio Pro recognizes video file as audio only

Dear all,
After encoding a file in Compressor using the HD DVD 60 min encoding setting (H.264 format), DVD Studio Pro recognizes this file as if it's audio, while it is in fact a video (I've checked and tested that).
The strange thing is that I encoded a file a few weeks ago using the same settings and then everything went well.
Any idea what this could be? I'm using DVD Studio Pro 4.2.1 and Compressor 3.0.5.
Thanks in advance and best regards,
Tim Metz

It is very likely that your conversion choices involve CODEC's, that PrE cannot handle.
Can you convert to a DV-AVI Type II, in the conversion program, as a test?
If not, then please run your final converted file through either G-Spot, or MediaInfo, to determine which CODEC was used for the problem video.
Good luck,
Hunt
PS - some players, like VLC, contain many CODEC's for playback, that are not installed on the system, and many of those, even if installed, would not work with PrE.

Re DVD Studio Pro 4: help with color saturation

Re DVD Studio Pro 4: having trouble with the color saturation on the text of menu buttons. been using the same method for years, checked opacity of colors. All of a sudden, the text color is splotchy and looks unprofessional. Clients are complaining and I do not blame them. Any help?

This issue isn't external drives, it's the mini, and installing the program.
http://www.apple.com/finalcutstudio/dvdstudiopro/specs.html
The specs do not seem to require an internal superdrive.

Will DVD Studio Pro 2 work with Quicktime 7.1.2?

Greetings all ~
Recently purchased a secondhand (and legal!) copy of DVD Studio Pro to run on my G4 iMac running OS 10.3.9. The primary purpose is to burn occasional DVDs of short movie files I'm creating which are visually simple, but have surround sound audio imported from Deck.
When I went to install DVDSP2, I moved too fast and took the manual's advice of updating to the latest version of QT - in this case QT 7.1.2. But the key for QT that came with DVDSP2 is, I discovered, for use with QT6. And as I've learned from other threads, QT 7.1.2 appears to be the only version of QT for which Apple has not made available an uninstaller allowing you to revert to an early version of QT.
From those threads, it appears that one answer is to backup and reinstall OS 10.3.9 with its earlier verison of QT. I'd much much much rather avoid this given all the software I'd need to reinstall.
It would be well worth it to me to pay the $30 to upgrade and get a key to QTPro 7.1.2 — if I knew that it would work with DVDSP2. But from another (unanswered) thread, it looks like there may be compatibility issues.
So ...does anyone know definitively whether or not DVDSP2 will run properly with QT7.1.2 on OS 10.3.9?
Thanks in advance for any help!
imac g4 Mac OS X (10.3.9) also run certain programs in OS 9.2.2. Run versions of ProTools on both systems, use Deck (for surro

Gary ~
Many thanks for this quick and helpful response. Unfortunately, that uninstaller doesn't seem to work with QT 7.1.2 ... it says it "will remove QuickTime 7.0.1" and when I try it on 7.1.2, which I now have, it tells me "You cannot install this software on this volume. This disk is dimmed because it does not contain an appropriate version of QuickTime."
Any other thoughts? Is my only option to reinstall 10.3.9 with its earlier version of QuckTime?
Thanks again ...
-D
imac g4 Mac OS X (10.3.9) also run certain programs in OS 9.2.2. Run versions of ProTools on both systems, use Deck (for surro

DVD Studio Pro 4 USE WITH EXTERNAL DVD BURNER??

Hello
Looking at buying DVD Studio Pro 4 for my mini but apple have just stated it will not install unless my machine has a superdrive. We've got an external firewire DVD burner and i've read mention of other versions of DVD Studio burning through externals so how come we carnt use DVD Studio Pro 4 with an external DVD burner?
Has anyone tried an external DVD burner with DVD Studio Pro 4 ?
Cheers

This issue isn't external drives, it's the mini, and installing the program.
http://www.apple.com/finalcutstudio/dvdstudiopro/specs.html
The specs do not seem to require an internal superdrive.

DVD Studio Pro 4 - Compatibility with Snow Leopard

Since installing Snow Leopard I have been unable to start DVD Studio Pro (4.0.3) - it shuts down immediately. I've tried getting the latest update for both Snow Leopard and DVD Studio Pro but that hasn't helped. Any suggestions?

If it worked and is Non-UB eventually issues could crop up, more so as more into the newer versions of the OS come out I would guess. But if you were running the version of DVD SP on your laptop with Snow Leopard and then after the software updates it stopped running, then in all likelihood it sounds like that one of the updates may have broke DVD SP in SL. Which updates did you install and can you roll back the system prior to the new software updates?
Deleting preferences could be something to also try.
User-> Prefs -> com.apple.dvdstudiopro.plist
You can also try to create another user account to see if that helps.

Please add support for MXF files created by Blackmagic Hyperdeck Studio

We have a Hyperdeck Studio that records DNxHD220 files in a MXF wrapper. Right now it is not possible to import them into Premiere CS5.5.
It would be great if Adobe would add support for those files.
Regards
NFact

It's mostly users here in the forums. Here's how to get Adobe to listen.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Blackmagic HDLink Pro any problems with FMLE 2.5

We are using Blackmagic HDLink Pro with Flash Media Live
Encoder 2.5 "
When we click start in FMLE 2.5 the software closes .
Can you help us and solve the problem?

I am not sure where exactly the problem lies. Apple, Adobe, or FLEXLM. All three should be charged for the enormous amounts of time spent by the money paying users. By wasting several hours and some help from the other posts, I think that it could be related to one service and 3 files.
The service is:
/Library/Application\ Support/FLEXnet\ Publisher/Service/11.5.0/FNPLicensingService
The files are:
/Library/Application\ Support/Adobe/Adobe\ PCD/pcd.db
/Library/Application\ Support/Adobe/Adobe\ PCD/cache/cache.db
/Library/Preferences/FLEXnet\ Publisher/
Looks to me like the service is working and it can't find some thing in /Library/Preferences/FLEXnet\ Publisher.
When I deleted pcd.db and cache.db, they were re-created when the service is started. When I delete the FLEXnet\ Publisher folder, again the empty folder is created. So, it looks like the problem lies in here (at least in my case). If some one can tell me what is in there and may be give me a file to get going, that might work. May be then it will ask for my license key instead of just choking.
Thank you all.

Blackmagic ultra studio sdi not working with Premiere Pro 8cc or A.E.cc(2014) on win7 GT630m i7 laptop - But works in A.E.cc(12.2.1.5)

There's a problem with the new update, as I no longer can use my BM Ultra Stdio SDI for monitoring. It let me select it but no image just black frame, with the new premiere pro cc 8 or a.e. cc (2014)
But i have No Problem in A.E. cc (12.2.1.5) work find just like it should, So what has happen here ? My system is Win7 Ultmate Laptop i7 Toshiba Satellite p850, dual gpu's GT630m & Intel HD 4000
With the latest blalckmagic drivers installed (10.1.1) This needs to be looked into, there is no way of monitoring accurately .

Problem Solved! (with a small catch)
While searching crashing issues I came across this thread,"Premiere Pro random crashing since update to 2014.2"
Marc_Lec Answered (and I paraphrase here)"...I had the same problem and this is what I did. In 'Preferences Memory' I increased the memory reserved for other application to at least half the installed and changed the optimize render from 'performance' to 'memory."
Thank You Marc_Lec for what has been a game changer for me since my last computer and the beginning of PremiereCC problems.
I changed my Memory reserved for Other Applications from the default 7gigs to 1/2 of my approx.31 available Gigs = 16Gigs. Viola!
No more crashing what-so-ever!
I still have to purchase an older GTX 980 graphics card to take advantage of Adobe's approved code to utilize X=Cuda Cores and GPU, but I think I'll hang onto my new TitanX, in hopes that Adobe will write code and approve it someday in the near future.
Now why doesn't Adobe say this officially about Memory Settings? (I don't know maybe they do and I missed I somewhere)
Mine and probably many peoples computers problems here on this board may be attributed to a simple Memory adjustment, because the computer needs more than 7Gigs to run itself, not to mention Premiere.

Right sequence and export settings in Premiere Pro CS6, video with still images

I am trying to run a video on my website (self hosted). This video, made with Premiere Pro CS6, consists of still images with different video effects.
This video is only 50 seconds, but when I transform this in the ogg, webm and mp4 format, I obtain file with large size and the quality is not good.
Could you please guide me to find out the right sequence and export settings in Premiere Pro CS6 to obtain a video for the best possible quality on the web?
A precise description of the settings would be awesome.
Thank you
Silvia

Make the export setting the resolution you want to use on the web.
Make the sequence settings accordantly to these export settings

DVD Studio Pro 2 works with new MacBook Pro Intel Duo Core 2?

Thanks.

If you get it to run you should not count on it working. Even 4.0.x, you need 4.1.x to have anything that is officially supported. I am not sure if 2 evens runs well on Leopard, let alone an Intel Machine.

Blackmagic hyperdeck studio pro bad video with FMLE

Similar Messages

Maybe you are looking for