Blackmagic removed desktop audio functionality from Declink cards on Windows.... now what?

So, Blackmagic removed desktop audio functionality from Declink cards on Windows.... now what? After Effects is not programmed to talk to Decklink cards directly on the audio part, there is no ASIO, or mercury playback for the audio part, Blackmagic says it was never intended to be used as an audio card, yet up to last version of version 9 provided an audio driver for it, as a result, now any application not written to talk to the Decklink card directly, can't use the card for audio playback. I'm wondering if they think that the people that uses After Effects don't need audio at all....   rewiring all the rooms in  the post productions facilities that had all the audio of all the system going out via the decklink cards it is not an option.
I'm wondering if Adobe is aware of this and if it have plans to support direct connection to the Decklink cards on the audio side of After Effects. This is a huge problem for all the people that uses AE and Decklink on windows and wants a profesiona quality audio monitoring.  Audition, Premiere, all of those can work now, but not AE. I remember some time ago AE used to support ASIO, but I do not see that option anymore.

Adobe talks with Blackmagic regularly and we were recently made aware of this change. It is, clearly, not something under our control but we can provide feedback to them about your responses to the change.
You are correct, After Effects does not play back audio through Mercury Transmit like Premiere Pro does. This was something we considered for After Effects CC 2014 (CC), but at the time we were developing this release there was no urgent need to do so, and this would require significant work to re-wire how After Effects plays back audio. We will continue to talk with Blackmagic and evaluate what the best plan is going forward.
Please don't hesitate to file feature requests for us about these issues: http://adobe.ly/feature_request

Similar Messages

  • How do I remove iCloud music function from iPhone?

    How do I remove iCloud music function from iPhone?

    Thanks, operative word here is hide.
    iTunes wants to keep music on the iPhone even after you want to clear it out and start over. I wish they had a "flush" function. At present after wiping it basically clean, down to one album, then checking the fill option, iTunes fills up the iphone with the same albums I just got rid of... I have a huge selection in my library to choose from. But it keeps returning to the same albums even though I have not checked them or artist. Frustrating.

  • IMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?

    iMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?

    Please give us some more details on what exactly has gone wrong with your iMac.
    What size RAM module/s are you trying to install and where did you purchase the RAM module/s from?
    RAM has to be installed in matched size pairs.
    Make sure the RAM module clicks into place. You need to apply a little bit of force to get the module to slide in and clIck into its module slot location.
    Correct, compatible and reliable Mac RAM can ONLY be purchased from online RAM sources Crucial memory or OWC (macsales.com).
    If you purchased RAM from ANY other source and still can't get the RAM to work, return it for a full refund and buy RAM from the sources I have listed.

  • Having upgraded from 8.1 to windows 10, what is on the recovery drive?

    I am new to the forum, I hope I have posted in the right place.   Having upgraded from 8.1 to windows 10, what is on the recovery drive? if its not windows 10 what must I do to create a new recovery drive? or should I delete it? I have a USB recovery for windows 8.1 if I should need it. I have created a windows 10 repair disk and have a system image on an external hard drive. I dont beleave I actually need the recovery drive as I have a backup option, but I would be good to have the option to recover from the drive. I understand the backup otion I have will allow me to recover if I lose the drive. Please advise Thank you in advance.

    Your recovery partition will still be Windows 8.1.  Hp wont give you free Windows 10 recovery media even if your laptop is brand new with Windows 8.1 installed.

  • HT3702 how can i remove the authorization hold from my card...

    how can i remove the authorization hold from my card

    You can try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
    How much was the amount ? A 'normal' holding charge is a small amount (e.g. equivalent to about $1), and usually happens after you add or change credit card details on your account. Here in the UK it can take a few working days for it to disappear (so a weekend can extend the elapsed time).
    Edit : I don't know what a non-liability certificate is and/or whether Apple can do one.

  • Help removing an audio book from itouch

    I have a new itouch and do not know how to re-move a audio book from the itouch

    Hello Lookin4ud,
    And welcome to Apple Discussions!
    The article below provides excellent explanations and instructions on how to delete or remove items from your iPod whether you have it set up to sync automatically or manually. It says songs, but can be applied to audiobooks as well. Check it out. Hope it helps.
    [Adding and Deleting Songs and playlists from your iPod|http://support.apple.com/kb/HT1855]
    B-rock

  • Did Apple remove the search function from this forum?

    I'm trying to find out if a topic has already been posted here, but I can't seem to find the Search Discussions function, which I'm certain used to be on the right of the screen.
    Did Apple remove this functionality from the Discussions forum?

    It's been temporarily disabled while they address some issues we're having with the forums lately.
    Cheers!
    -Bryan

  • Drag & drop audio clip from timeline to project window ?

    i no longer can drag a clip from timeline to the project window & then breakout the clip to mono by selecting clip - audio options- breakout to mono - now when i drop an audio clip from timeline into the project window it does not show up anywhere in the project window - did an update get rid of this function ? it was much better than having to go back to the unedited original source & start from scratch ...

    thanx for your time Jim - i understand that would be the preferred method but that was a quick fix until recently i have noticed that i can no longer do it by just grabbing the edited clip & drop it in project window so that i can modify just that portion of the original files properties - it still functions that way on a friends machine - was just kinda weird that i can't get it to work that way any more …

  • IPhoto hung importing photos from SD card and is now not responding

    Importing photos from SD card (canon raw format) and iPhoto hung and is no longer responding have to firce quit to get out of it.  Suggestions on reinstalling iPhoto. or?

    I was able to resolve the issue through forcing the image capture program to quit through the activity monitor and reboot the machine and everything seems to function fine now.  Imported the pics, all 240 of them in RAW format.

  • Is it possible to prevent the See Also function from displaying the topic window when only one "see also" topic exists?

    When you have several topics assigned to a see also button,
    the see also button displays several topics within the pop-up
    window in the compiled help. However, if you have only one see also
    topic assigned to the button, the button automatically displays the
    topic window for that topic. The first time I saw this, I thought
    it was a bug. When I've asked other people to test my help
    projects, they also think this is a bug.
    Is it possible to "make" the see also function display the
    pop-up window, regardless of how many topics are assigned to the
    button?
    thanks in advance,
    ChristyG

    Are you sure that you can change the permissions of symlinks themselves? I think I've tried to make files read-only via symlinks on a local server but ended up using bindfs because it wasn't possible. Even if you can, symlinking everything that might be necessary for a given environment would not be ideal, plus I don't think symlinks can be used across different filesystems.
    If a real-life human can figure out if it's he/she is in a chroot and break out of it, then he/she can write a script to do the same. I want a sandbox that could run malicious code with no effect on the system (if that's possible). Also, I think if the chroot idea were truly feasible, makepkg would have been using it for years already to simply install packages in the chroot as you normally would and then package them. There would also be several sandbox applications that could run applications safely. So far I have yet to find any.
    I admit that I haven't looked into using a chroot in detail though and of course I may have missed some application which creates such a setup. Right now I think using per-application namespaces with fuse seems the most promising but I won't know until I've finished implementing a test application. If it turns out that it's a dead end I'll take harder look at chroot but it really doesn't seem to be able to do what I want.

  • I have problems with pci-gpib card under windows me, What I need to know what to do in order to fix this problems?

    Hi, I have installed a pci-gpib card in my computer, I have a problem with
    installation, the message of troubleshooting wizard is as follow:
    "One or more missing GPIB interfaces.
    There are several reasons why you might encounter this problem:
    Reason: Your GPIB interface is incorrectly installed.
    Solution: Please verify that your GPIB interface is correctly installed
    and rerun the NI-488.2 Troubleshooting Wizard.
    Reason: You are using a non-Plug-and-Play interface (e.g., AT-GPIB/TNT,
    GPIB-PCII/IIA, GPIB-ENET) and you did not use the Add New Hardware Wizard
    to add the interface to your system properly.
    Solution: Click th
    e Add Hardware button and the Add GPIB Hardware wizard
    will guide you through the process of adding GPIB hardware.
    Reason: For the GPIB-USB and GPIB-1394, the host controller (USB or 1394)
    must be working properly in order to use the GPIB interface.
    Solution: Click on the System Details button for details about the USB and
    1394 host controllers.
    Reason: For the PCMCIA-GPIB and PCMCIA-GPIB+, the PCMCIA host controller
    must be working properly in order to use the GPIB interface.
    Solution: Use the Windows Device Manager to verify that your PCMCIA host
    controller is functioning correctly. Start the control panel by selecting
    "Start>>Settings>>Control Panel", open the System icon and select the
    Device Manager page. If you select "View devices by type", you can look at
    the PCMCIA socket properties to ensure it is correctly enabled."
    And on system details the message is the next:
    "USB Driver type: USB universal host controller"
    "This version of windows does not su
    pport IEEE 1394."
    I am using Windows Me, so i want to know what i need to do to fix this
    problems.
    Best regards.

    If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
    If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

  • Lost sound, uninstalle​d sound card (forum advice) now what?

    I lost sound on my system and automatic driver repair did nothing, another forum said to uninstall the sound card and reinstall. I uninstalled and now what? where do i find the card to reinstall. the card is IDT High Definition Audio CODEC.
    Also having trouble installing updates, constantly get the error message 80070BC9

    BDF2, welcome to the forum.
    Here is the Software and drivers page for the computer.  The only driver that is available for the sound card is for Win 8.0.  Therefore, you should use the original driver.  You can have the program scan you system to find the appropriate driver, also.  Click on "Check now" and install the additional software.  Then, follow the instructions and the program will scan your computer for driver updates or for missing drivers.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Home Theater need. Multiple Audio Streams from 1 card or possible to use 2 car

    I currently have 2 SB Li've's installed and a SB Audigy in the box.
    I would like to be able to send different audio out to different devices. I need to send audio from a game interface called MAME 32 to a speaker system connected to the PC. I also use this PC as a home theater PC and want to send audio from my DVD playing software out to my TV(in analog stereo mode) and/or to my receiver(in Dolby Digital mode using the digital connector).
    I would like to be able to run these seperatly without having to go into the Control Panel and switch the default sound card like I am doing now. I do not need to run them at the same time.

    Bummer. Are you guys working on something that might have this capability? Seems to me that the closer we integrate PC's into our entertainment systems the more need we will have for the ability to do multiple audio streams, i.e. MP3's to the living room. DVD movie audio to the family room, XM radio classical station to the kitchen for mom etc..
    Intel is offering this as an onboard solution that has the ability to do at least 2 different streams.
    http://www.intel.com/design/chipsets/hdaudio.htmMessage Edited by relay on 0-26-2004 05:02 PM

  • Remove Saved Search functionality from Web IC

    Hi Experts,
    I have a view where in there is a component related to Saved Searches functionality that is appearing on the Web IC. Now, for my client, they do not want those fields to be visible.
    So, I wanted to know how can those fields related to Saved search be removed from the Web IC.
    I checked the configuration of the components used in that view and also for component usages of the component. But I did not find any component usage for the Saved search component. This sounds weird but I am not able to find out from where this Saved search component is displayed on the Web IC screen.
    We didn't have this earlier in our system. This is introduced after we upgraded our system from CRM 6.0 to CRM 7.0 EHP2.
    I have attached the screen shot of my view where the Saved Search fields are available.
    Please suggest me some method by which these fields can be removed. Also, if there is any configuration in SPRO where this can be checked.
    Thanks,
    Preeti

    Hi Preeti,
    Can you check if your view belongs to a viewset? If so, try to find there in correspoding html code for tag "thtmlb:searchSavingArea", something like this:
    <thtmlb:searchSavingArea>
       <bsp:call comp_id = "<%= controller->GET_VIEWAREA_CONTENT_ID( 'SavedSearchRegistration' ) %>"
              url     = "<%= controller->GET_VIEWAREA_CONTENT_URL( 'SavedSearchRegistration' ) %>" />
    </thtmlb:searchSavingArea>
    Try to comment it and check if it works (I've never tried it ).
    Kind regards,
    Garcia

  • Photos sent to file on desktop when importing from memory card

    The photos sent to a file when importing from a memory card appear in the file as Adobe documents and cannot be opened.  If I try to open a message appears 'Adobe Reader cannot open this document as it is not a supported file/
    What has gone wrong?

    You have already opened a thread on this issue, we don't need a second thread on the same issue.

Maybe you are looking for

  • How to pass mysql query id through url parameter to a detail page

    Hi there, I am a newbie to JSP and I am trying to pass a url parameter to a detail page so that it will query a mysql data query to show the details of that query. How can I write the query on the details page so that it will display the query result

  • ABOUT getImage

    how to use this function? where to find some example?

  • Firefox will not open a window

    I have reinstalled firefox and removed my preference file. the application boots but no window opens.

  • Restarting on its own while on the internet

    while on the internet twice in one day i got a message saying your computer will restart because there was an error something like that and it restarted on its own?

  • Thread.suspend and Thread.resume

    I'm trying to build a class to replace the use of Thread.suspend() and Thread.resume() deprecated methods. I tried to as recommended on sun web page but it doesn't work : illegate state monitor exception. Does anyone have a solution ? Note : Source c