Blackout

I received my new MBA 13" for three day, but it encountered blackout( black screen) twice a day when using in normal condition.
Is this a software or hardware issue? If it is the former, I prefer to waiting for a update. If it is a issue relating to hardware, I must ask for a replacement immdiately.
I install and run on OS only, no windows installed.
Who can help me make decisions?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.
My opinion is that if you don't get an immediate solution from Apple, you should return the unit.

Similar Messages

  • MacBook Air Mid 2013 - Random system blackouts

    Hi,
    I just got the latest MBA 2013 about 3-weeks ago.
    I have been noticing quite frequent system blackouts with regards to the laptop.
    By system blackouts, the system responds as if it had entered a sleep state and returns back to its wake state a few seconds later.
    This problem happens quite randomly, sometimes even when I am simply just typing or surfing the web when it is firmly seated on a table.
    Twice, it entered the blackout and the keyboard died, forcing me to reset the system entirely in order to resume normal functions.
    I have check the web and some say that it is a problem with Mountain Lion that could be observed since 2012. Is this true? Or is it possibly a hardware sensor issue?
    Thanks
    David

    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    Best.

  • ESPN only not working properly (not from "blackout" issue).

    Both of my ESPN channels become fuzzy or just go to unavailable entirely.  It's not a "blackout" issue.  For example I am watching sportscenter right now and the channel goes in and out, freezes up, etc.  ESPN works fine on my bedroom tv.  I have also received a new box to switch out to see if it was a box problem, but the other box does the exact same thing. 
    Again, it's only the one channel.  Any ideas?

    Retighten all coax connectors to the STB, including any splitters in the signal path.  What you describe appears to be a frequency-related problem (I think the two ESPN channels are on the same QAM channel) that loose coax connectors can cause.  It's a physics thing  that can effect only certain frequencies.  This is a solution other have been successfully used to fix problems were only a few channels break up or go away.

  • TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)

    this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
    Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
    and extracting .. found Error1 at the point Verify firmware . AGAIN AND
    and this is the log ..
    2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
    [13:47:25.0555] Changing state from 'Idle' to 'Restoring'
    [13:47:25.0555] device software does not support nonce generation
    [13:47:25.0555] requested restore behavior: Erase
    [13:47:25.0570] requested variant: Erase
    [13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:27.0333] <DFU Device 0562C260>: production fused device
    [13:47:27.0333] requested restore behavior: Erase
    [13:47:27.0333] device software does not support nonce generation
    [13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
    [13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
    [13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
    [13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
    [13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
    [13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
    [13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
    [13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
    [13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
    [13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
    [13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
    [13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
    [13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
    [13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
    [13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
    [13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
    [13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
    [13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
    [13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
    [13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
    [13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
    [13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
    [13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
    [13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
    [13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
    [13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
    [13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
    [13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
    [13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
    [13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
    [13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
    [13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
    [13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
    [13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
    [13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
    [13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
    [13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
    [13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
    [13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
    [13:47:27.0942] WinDFU::UploadData: ZLP
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:30.0968] WinDFU::ResetDevice: resetting...
    [13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
    [13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
    [13:47:31.0046] Finished DFU Restore Phase: Successful
    [13:47:31.0218] DFU mode device disconnected
    [13:47:31.0218] Device removed when in state Restoring, moving device to transition state
    [13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
    [13:47:31.0218] Creating timer to monitor transition
    [13:47:32.0175] DFU mode device connected
    [13:47:32.0175] Transitioning device returned, continuing restore.
    [13:47:32.0175] Canceling timer
    [13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
    [13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:32.0175] requested restore behavior: Erase
    [13:47:32.0175] requested variant: Erase
    [13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
    [13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
    [13:47:33.0532] requested restore behavior: Erase
    [13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
    [13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
    [13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
    [13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
    [13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
    [13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
    [13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
    [13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
    [13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
    [13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
    [13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
    [13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
    [13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
    [13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
    [13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
    [13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
    [13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
    [13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
    [13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
    [13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
    [13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
    [13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
    [13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
    [13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
    [13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
    [13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
    [13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
    [13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
    [13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
    [13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
    [13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
    [13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
    [13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
    [13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
    [13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
    [13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
    [13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
    [13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
    [13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
    [13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
    [13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
    [13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
    [13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
    [13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
    [13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
    [13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
    [13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
    [13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
    [13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
    [13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
    [13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
    [13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
    [13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
    [13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
    [13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
    [13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
    [13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
    [13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
    [13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
    [13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
    [13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
    [13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
    [13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
    [13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
    [13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
    [13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
    [13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
    [13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
    [13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
    [13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
    [13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
    [13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
    [13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
    [13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
    [13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
    [13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
    [13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
    [13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
    [13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
    [13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
    [13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
    [13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
    [13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
    [13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
    [13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
    [13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
    [13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
    [13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
    [13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
    [13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
    [13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
    [13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
    [13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
    [13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
    [13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
    [13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
    [13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
    [13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
    [13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
    [13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
    [13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
    [13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
    [13:47:35.0732] WinDFU::UploadData: ZLP
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:38.0758] WinDFU::ResetDevice: resetting...
    [13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
    [13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
    [13:47:38.0836] Finished DFU Restore Phase: Successful
    [13:47:39.0039] DFU mode device disconnected
    [13:47:39.0039] Device removed when in state Restoring, moving device to transition state
    [13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
    [13:47:39.0039] Creating timer to monitor transition
    [13:47:41.0674] Recovery mode device connected
    [13:47:41.0674] Transitioning device returned, continuing restore.
    [13:47:41.0674] Canceling timer
    [13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
    [13:47:41.0684] requested restore behavior: Erase
    [13:47:41.0684] requested variant: Erase
    [13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:42.0528] iBoot build-version = iBoot-1940.10.58
    [13:47:42.0528] iBoot build-style = RELEASE
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:42.0543] AMDeviceIoControl: pipe stall
    [13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
    [13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
    [13:47:42.0543] radio-error not set
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] interface has 1 endpoints, file pipe = 1
    [13:47:42.0543]
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
    [13:47:42.0606] unable to open device_map.txt: No such file or directory
    [13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
    [13:47:43.0994] unable to open device_map.txt: No such file or directory
    [13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:43.0994] AMDeviceIoControl: pipe stall
    [13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
    [13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
    [13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
    [13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
    [13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
    [13:47:46.0958] unable to open device_map.txt: No such file or directory
    [13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
    [13:47:46.0958] Finished Recovery Restore Phase: Successful
    [13:47:48.0409] Recovery mode device disconnected
    [13:47:48.0409] Device removed when in state Restoring, moving device to transition state
    [13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
    [13:47:48.0409] Creating timer to monitor transition
    [13:47:52.0895] RestoreOS mode device connected
    [13:47:52.0895] Transitioning device returned, continuing restore.
    [13:47:52.0905] Canceling timer
    [13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
    [13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
    [13:47:52.0905] requested restore behavior: Erase
    [13:47:52.0905] requested variant: Erase
    [13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:53.0792] requested restore behavior: Erase
    [13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0792] device did not return saved USB log
    [13:47:53.0792] device did not return saved panic log
    [13:47:53.0792] previous restore failed with exit status 0x100
    [13:47:53.0792] connected to service com.apple.mobile.restored
    [13:47:53.0808] using protocol version 13
    [13:47:53.0808] unable to open device_map.txt: No such file or directory
    [13:47:53.0808] board config = n42ap
    [13:47:53.0808] no value returned for BootArgs
    [13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
    [13:47:53.0824] no value returned for MarketingPartNumber
    [13:47:53.0824] _copyDeviceProperty() failed for mpn
    [13:47:53.0824] requested restore behavior: Erase
    [13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
    [13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
    [13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
    [13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
    [13:48:10.0360] L2TP domain init
    [13:48:10.0360] L2TP domain init complete
    [13:48:10.0360] PPTP domain init
    [13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
    [13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
    [13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
    [13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [13:48:10.0360] [NAND] WMR_Start:174 FIL_Init  [OK]
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
    [13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
    [13:48:10.0360] [NAND] WMR_Open:371 VFL_Open    [OK]
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] AppleMultitouchN1SPI: successfully started
    [13:48:10.0360] AppleH4CamIn::start - back camera expected
    [13:48:10.0360] AppleH4CamIn::start - front camera expected
    [13:48:10.0360] AppleH4CamIn::power_off_hardware
    [13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
    [13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
    [13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
    [13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
    [13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] display-scale = 2
    [13:48:10.0360] display-rotation = 0
    [13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
    [13:48:10.0360] found display: primary
    [13:48:10.0360] display: 640 x 1136
    [13:48:10.0360] found PTP interface
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioControl
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
    [13:48:10.0360] IOAccessoryPortUSB::start
    [13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
    [13:48:10.0360] init_waste
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
    [13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
    [13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
    [13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
    [13:48:10.0360] [NAND] WMR_Open:420 FTL_Open    [OK]
    [13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
    [13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
    [13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
    [13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
    [13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
    [13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated():  Received power state change before driver has initialized, ignoring
    [13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
    [13:48:10.0360] Started logging for intf
    [13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
    [13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
    [13:48:10.0360] start:156
    [13:48:10.0360] start:156
    [13:48:10.0360] AppleARMBacklight::start: No AAP function
    [13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
    [13:48:10.0360] recv(13, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
    [13:48:10.0360] recv(14, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
    [13:48:10.0360] unrecognized key 'BootArgs' in value query
    [13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
    [13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
    [13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] client protocol version 13
    [13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
    [13:48:10.0360] Restore options:
    [13:48:10.0360]  UUID                           => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
    [13:48:10.0360]  MinimumSystemPartition         => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionSize            => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionPadding         => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
    [13:48:10.0360] entries =>
    [13:48:10.0360]  2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
    [13:48:10.0360]  3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
    [13:48:10.0360]  4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
    [13:48:10.0360]  5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
    [13:48:10.0360]  8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
    [13:48:10.0360] }
    [13:48:10.0360]
    [13:48:10.0360] entering load_sep_os
    [13:48:10.0360] device has no sep
    [13:48:10.0360] entering partition_nand_device
    [13:48:10.0360] device supports boot-from-NAND
    [13:48:10.0360] nand device is already partitioned
    [13:48:10.0360] entering wait_for_storage_device
    [13:48:10.0360] Searching for NAND service
    [13:48:10.0360] Found NAND service: IOFlashStoragePartition
    [13:48:10.0360] NAND initialized. Waiting for devnode.
    [13:48:10.0360] entering clear_remap_variable
    [13:48:10.0360] executing /usr/sbin/nvram
    [13:48:10.0360] entering format_effaceable_storage
    [13:48:10.0360] effaceable storage is formatted, clearing it
    [13:48:10.0360] effaceable storaged cleared
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Sochi11D257.N42OS
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] entering check_for_restore_log
    [13:48:10.0360] found restore log (size = 28347)
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] error unmounting '/mnt2': Invalid argument
    [13:48:10.0360] entering clean_NAND
    [13:48:10.0360] NAND format complete
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
    [13:48:10.0360] entering format_storage_for_LwVM
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] unexpected partition 'LwVM' - skipping
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
    [13:48:10.0360] entering create_filesystem_partitions
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] system partition padding size is: 167772160 bytes
    [13:48:10.0360] unable to open : No such file or directory
    [13:48:10.0360] creating 2 partitions
    [13:48:10.0360] creating encrypted data partition
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] block size for /dev/disk0s1s2: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering mount_filesystems
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s2
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Data
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Data appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
    [13:48:10.0360] entering resize_system_partition_to_options
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
    [13:48:10.0360] Erasing system partition prior to resize operation.
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:0 requiredSize=465920
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized the system partition
    [13:48:10.0360] entering maximize_data_partition
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
    [13:48:10.0360] maximizing data partition to 13946060799 bytes
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=3404800
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized data partition to consume free blocks
    [13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] entering ramrod_ticket_update
    [13:48:10.0360] looking up root ticket hash
    [13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
    [13:48:10.0360] received valid ticket (2741 bytes)
    [13:48:10.0360] entering restore_images
    [13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
    [13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
    [13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
    [13:48:10.0360] void AppleUSBDeviceM

    Hello gamavranje,
    Thanks for using Apple Support Communities.
    The icons you're seeing on your iPhone indicate it is in recovery mode.  Please plug your iPhone into your computer, and restore it with iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • 2011 Macbook Pro Retina Blackouts and constant Auto-Reboots

    Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
    Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
    The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
    I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
    I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
    Thank you so much for your concern and help!

    Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
    Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
    The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
    I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
    I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
    Thank you so much for your concern and help!

  • My iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Ple

    Its been one month, my iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Please help me.

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Random blackout atfer upgrading to xorg 1.6?

    OK, I'm not very sure if this is related to xorg, here is the situation:
    After upgrading to xorg 1.6, I restart X and start firefox to surf the internet,
    atfer a few hours of usage, my screen suddenly blackouts, and it seems like a hard crash,
    I can't use crtl-alt-backspace to kill X nor use crtl-alt-Fn to switch between virtual consoles,
    this is very frustrating since I'm always very proud of my super-rock-solid Arch,
    I have NEVER had issue like this, since it happens after upgrading to xorg 1.6,
    I suspect the incident is related to it,
    does anyone have a similiar situation?
    any suggests or thoughts would be very appriciated.
    Sean

    You have to add the 2 patches given by mlee and recompile xorg-server
    Here's my modified xorg-server PKGBUILD
    # $Id$
    # Maintainer: Alexander Baldeck <[email protected]>
    # Contributor: Jan de Groot <[email protected]>
    pkgname=xorg-server
    pkgver=1.6.0
    pkgrel=4
    pkgdesc="X.Org X servers"
    arch=('i686' 'x86_64')
    license=('custom')
    url="http://xorg.freedesktop.org"
    depends=('hal>=0.5.11' 'libgl' 'libxfont>=1.4.0' 'openssl>=0.9.8j' 'libpciaccess>=0.10.5' 'libxv>=1.0.4' 'pixman>=0.14.0' 'xcursor-themes' 'xkeyboard-config>=1.5' 'xorg-server-utils' 'xorg-fonts-misc' 'xbitmaps' 'diffutils' 'xf86-input-evdev>=2.1.3')
    makedepends=('libx11>=1.2' 'mesa>=7.4' 'xf86driproto>=2.0.4' 'xtrans>=1.2.3' 'libxkbfile>=1.0.5' 'randrproto>=1.3.0' 'renderproto>=0.9.3' 'xcmiscproto>=1.1.2' 'bigreqsproto>=1.0.2' 'resourceproto>=1.0.2' 'videoproto>=2.2.2' 'compositeproto>=0.4' 'scrnsaverproto>=1.1.0' 'resourceproto>=1.0.2' 'libxinerama>=1.0.3' 'xf86dgaproto>=2.0.3' 'recordproto>=1.13.2' 'libgl>=7.4' 'glproto>=1.4.9')
    conflicts=('catalyst-utils<=9.2')
    options=('!libtool')
    provides=('x-server')
    groups=('xorg')
    install=xorg-server.install
    source=(${url}/releases/individual/xserver/${pkgname}-${pkgver}.tar.bz2
    xorg-redhat-die-ugly-pattern-die-die-die.patch
    server-1.6.patch
    hal-wait.patch
    xserver-1.6.0-xinerama-crashes.patch
    xserver-1.6.0-xinerama-cursors.patch)
    md5sums=('aafe73f5807ce8bb534727ecb72467c7'
    '1a336eb22e27cbf443ec5a2ecddfa93c'
    '064559385557ad02432a1e800b92b14e'
    'f16d2caef84e1a9c4075b6c5e145512d'
    'fdb4fb466459c32c897ee3b405b6f849'
    'a30429f7c2114e7170d62858472ec102')
    build() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    # Get rid of the ugly pattern
    patch -Np3 -i "${srcdir}/xorg-redhat-die-ugly-pattern-die-die-die.patch" || return 1
    # Upstream fixes from server-1.6 branch
    patch -Np1 -i "${srcdir}/server-1.6.patch" || return 1
    # Revert waiting for hal, assume hal won't show up when initial connect fails
    patch -R -Np1 -i "${srcdir}/hal-wait.patch" || return 1
    # Avoid Crashes when Xinerama is enabled
    patch -Np1 -i "${srcdir}/xserver-1.6.0-xinerama-crashes.patch" || return 1
    # Avoid Cursors problem with xinerama
    patch -Np1 -i "${srcdir}/xserver-1.6.0-xinerama-cursors.patch" || return 1
    # Fix dbus config path
    sed -i -e 's/\$(sysconfdir)/\/etc/' config/Makefile.* || return 1
    libtoolize --force || return 1
    aclocal || return 1
    autoconf || return 1
    automake --add-missing || return 1
    ./configure --prefix=/usr \
    --enable-ipv6 \
    --enable-dri \
    --disable-dmx \
    --enable-xvfb \
    --enable-xnest \
    --enable-composite \
    --enable-xcsecurity \
    --enable-xorg \
    --enable-xephyr \
    --enable-glx-tls \
    --enable-kdrive \
    --enable-install-setuid \
    --enable-config-hal \
    --enable-config-dbus \
    --enable-record \
    --disable-xfbdev \
    --disable-xfake \
    --disable-xsdl \
    --disable-static \
    --sysconfdir=/etc/X11 \
    --localstatedir=/var \
    --with-default-font-path=/usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1 \
    --with-xkb-path=/usr/share/X11/xkb \
    --with-xkb-output=/var/lib/xkb \
    --with-dri-driver-path=/usr/lib/xorg/modules/dri || return 1
    make || return 1
    make DESTDIR="${pkgdir}" install || return 1
    rm -rf "${pkgdir}/var/log" || return 1
    install -m755 -d "${pkgdir}/etc/X11" || return 1
    install -m755 -d "${pkgdir}/var/lib/xkb" || return 1
    # Needed for non-mesa drivers, libgl will restore it
    mv "${pkgdir}/usr/lib/xorg/modules/extensions/libglx.so" \
    "${pkgdir}/usr/lib/xorg/modules/extensions/libglx.xorg" || return 1
    install -m755 -d "${pkgdir}/usr/share/licenses/${pkgname}"
    install -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/" || return 1
    For now the cursor is ok and I don't experience crashed when I hold keys.

  • IMAC 27" random screen blackout

    my 8 month old iMAC 27" quad core machine recently started to "black out"  Screen goes black for no reason and the only remedy is to hit the power button - usually twice.  This will bring the system back to where it was, all open APPs etc. will be exactly where you left them.   I also tested the speaker volume up/down keys to see if the "system" was still functioning during a screen black out.  THe CPU etc. is still avtive as the speaker volume when maxed out will "beep" at you. 
    I called tech support - they had me do some special resets of power control and PRAM - no luck
    I took the system into Apple store for Genius Bar appointment - 2 hours of running the mac in the store, of course it did not black out....however, they ran other diagnostics and ran a bunch of utilities, graphics etc. to max the RAM and CPU load, heating up the system but still nothing happened.  they suggested I reistall the OS by doing a hard boot and holding down the command key to prompt me to re-install the OS from the "cloud".  This did not solve the problem either.
    I then took the system back to Apple and told them to fix it or replace it.  They kept the system for 5 days, and replaced
    item 661-5948 Board, Logic, 2.7GHZ, Quad Core i5
    item 661-5967 card, video, AMD radeon HD 6770M, 512M
    item 661-6615 LCD panel 27 inch with BLC
    and labor: TOTAL COST $1183.32
    This was all under the first year warranty so I did not have to pay for this out of pocket.  If you look at the list of repairs, they effectively gutted my iMAC except for the HDD and enclosure.  Ahhhhh at last I thought I would be back to a fully functional iMAC.   Two days after getting home and just browsing the internet the blackouts started again.
    Once the system blacks out the first time (which appears to be a completely random amount of time) it will then black out more frequently after hitting the power button. 
    It's time to call Apple again and demand a new system, wondering if the iMAC LCD crystal / video components are suffering from a manufacturing defect....as it seems the new components they replaced are suffering from the same issue.
    APPLE - would appreciate you recognizing this problem and working on resolution.
    thanks,
    Share holder and completely converted MAC power (family) users!!!!

    Hi, I hope you find this information useful:
    A few years ago, we purchased iMac 27" 11,3 (Mid-2010) (with i7 2.93Ghz, ATI 5750 1GB VidRam, etc.) for our offices and software development team. They were originally shipped with Snow Leopard and worked as expected and without any problems. However, a year later, we upgraded to Lion and all of machines immediately exhibited the same problem: the screen would go to sleep by itself and would require a hard reboot or sleep on/off. (Only the screen was asleep and the rest of the iMac continued to function; this was confirmed by screen sharing to the machine.)
    Due to the severity and impact on our business, we immediately contacted Apple and their genius bar staff in New York/SoHo. They were unable to determine the root cause, so they replaced all of the logic boards, video cards, and screens, and got us back online asap. This resolved the problem, but we were curious to know why. After days of rigorous testing, we concluded that the issue is caused by a bug in MacOS. Specifically, faulty Kext files (Kernel Extension files extend the functionality of the MacOS Kernel) for the ATI drivers.  So, why did the replacing the hardware work? We think that the Kext files that were released and distributed with Lion (and later MacOS versions) correctly supported the newer hardware revision of the replacement components, but not the older ones.
    If you're experiencing this problem, short of replacing the components or waiting (for another 3+ years) for Apple to hopefully fix their OS software, you can lessen the effects and be able to recover faster by doing the following: (Please bear in mind that these are not permanent fixes.)
    Turn on "Hot Corners" and assign one corner to "Put Display To Sleep". When your screen goes to sleep, move your mouse (which still works) to that assigned screen corner for a second, then move it again. This will wake your screen. You may have to do this a couple of times, but it's much faster than a hard reboot or a sleep on/off for your iMac.
    Turn the brightness of your screen to a low setting (10%-15% of the total brightness).
    Turn on screen sharing, so you have a last resort method of accessing the machine.
    If you're not convinced that it's a MacOS software problem, then do what we did and see for yourself; install Windows 7, Windows 8, or Linux via Bootcamp or as the only OS on the iMac. Those operating systems and drivers worked flawlessly for us; the bug does not occur and the screen does not go to sleep, but if you dual boot and switch back to MacOS, the bug reappears because the iMac is loading faulty Apple MacOS software.
    Good luck!

  • HP Pavilion DV6 2190us Since November constant display blackouts & freezes

    Seriously, I will never ever pay $1000 for another pc and I will never ever buy another HP product.
    Hewlett Packard was my gold standard, but not anymore!
    To begin, a month before my one year warranty ended, the fan on my pc went out and the laptop would
    not let me access my files.  I was in the middle of college finals.
    HP customer service said that i could pay for express service and there was no way I could have someone
    else replace the fan because it was INTEGRATED.
    He assured me that I would get it back with a turn around of 4 days so I could get to my files for my college classes.
    What happened?  I get a call telling me that it will cost me $300 because I have a cracked screen.
    I said it was NOT cracked when I had it.
    The guy told me that he would send me pictures of it which he NEVER DID!
    Bottom line.  I did NOT pay $300.  So what did I get back?  A laptop with a cracked hinge that was not cracked
    when I had it. 
    And an icon on the desktop that was labeled "old files"
    and was EMPTY!
    All my computer files were NOT reloaded.
    I called and what did the various reps I spoke to say?
    Oh, well, there's NOTHING YOU CAN DO.  THEY"RE JUST GONE!
    Wow, what great service!!
    I will spare you all the gory details of what I had to do to complete my college classes.
    It left my hands with a severe case of carpel tunnel and I couldn't pick up anything or use them for over 2 months
    because of all the typing I had to do to re research TWO 22 page essays that were due within 2 weeks...all thanks
    to the idiot that did not reload my files.
    And the whole purpose of paying express fees to get it done was to get those vital files back.
    It also killed my 4.0 gpa I worked very hard to maintain for 5 years.
    Since November, the laptop has had continual blackouts.  Sometimes it recovers, other times it remains black and
    keeps running, other times it goes black and stops running or goes gray.
    The USB ports are dysfunctional and sometimes I boot up and the optical mouse works on one port or the other or
    neither.  Sometimes it works for awhile, then stops and the finger pad works but finally craps out, too.
    Every time I boot up, it is like a different laptop and I have to check the power settings, the USB ports, update the
    mouse drivers,
    It's a mess.
    It may crash in 5 minutes or 5 hours.  It's always a different time frame.
    But it is a given that I have to turn it off and reboot...sometimes several times.
    I can't depend on it for the next semester of college, so I am going to purchase a new laptop
    NOT an HP product.
    The Nvidia display drivers...I've tried them all
    They all suck.
    Why the mouse and USB ports ares dysfunctional, I don't know
    Why the power settings change when I reboot, I don't know
    At first, i thought it was internet explorer 9
    And resetting it seems to work, but only for awhile.
    In fact, everything I try to correct all this stuff seems to work...for awhile.
    I've probably rebooted this **bleep** thing over a thousand times since November.
    I was so desperate that I tried restore image to factory settings
    As soon as it rebooted, the screen froze.
    This has been the worst experience I've ever had with a computer.

    Thanks, 'cat!
    I did buy a Seagate 2 T external drive that was on sale at I think Best Buy.
    I read that other people had the same problem with other hinged laptops
    The thing is that the guy who called me after they got my laptop express told me that the MONITOR
    was cracked and he would send me pictures
    I said the monitor wasn't cracked when I had it!
    then he went away and came back and said the the hinge was cracked
    I told him it wasn't when I HAD IT!!
    I inspected it before I put it in the * box.
    They just wanted $300 and didn't want me to skate with getting a fan replaced on my warranty
    I think HP technical is very corrupt.
    I do not trust any of their phone representatives.
    The girl in India who told me to take a screwdriver to the bottom of the laptop was an idiot
    I rebooted a few times and it finally booted itself back up again
    That was about 4 months after I got it.
    Thanks!!

  • External hard drive not readable anymore after a blackout.

    We had a blackout yesterday and now my external drive comes up as not readable, it has all my iTunes as well as photo's that are not replaceable. When I attempted to repair permissions, it would only allow me to delete and re-format the hard drive, which I haven't done as I don't want to loose all my stuff. I can't even access my time machine to go back to before the black out. Please help.

    Do not attempt to perform a permissions repair. That is not related to the problem you are experiencing.
    Do you have that external hard drive set up as a single partition or multiple partitions? If multiple partitions, are all the partitions failing to mount?
    Regardless, you are going to have to move to a more robust (and expensive) method of recovering your data than is available with the tools provided by Mac OS X. Your best chance of recovering your data without spending an inordinate amount of money is DiskWarrior:
    http://www.alsoft.com/diskwarrior/
    If the data is very valuable to you and you really really can't lose it, then you might care to try a profesional data recovery laboratory. It is extremely expensive – thousands of dollars whether they are successful or not. There are many good labs; here's one:
    http://www.datarecoverylabs.com/
    In the future, you simply have to learn to keep redundant backups. Keeping active files on the same device as your backups makes no sense at all; you might as well not bother creating the backups if you're going to do that. Read here for good advice on backups:
    http://www.mac-essentials.info/?page_id=213

  • How do you Blackout texts in Pages?

    How would you blackout text in Pages ? almost like white out but obviously in black.
    OS X Yosemite 10.10
    Pages-5.5

    Follow these steps for Pages v5.2.2 (v5.5.1 in Yosemite).
    Quit Pages
    System Preferences > General > Disable Use LCD font smoothing when available
    Open your document in Pages
    Select the text to black out. (assumption: your text is black)Advanced Options (gear icon adjacent to underline in Styles panel)Character fill color is black
    Click elsewhere in the document to deselect, and reveal the now redacted text.

  • Random screen blackout 2009 24 inch Cinema Display... HELP.

    Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

    Hello, Ertjie.
    The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today.  Click the "Download" link I post here or try the one in the kb article again.  Perhaps it will work for you now?
    However, I note that the kb article expressly states that this firmware update: 
    ...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
    If your Mac is really using Mac OS X (10.6.8)  as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled.   If so, contact Apple or your Apple-Authorized Service Provider for help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • What can I do? my iphone blackout i dont know why I cant open it and also it cant connect to the iTunes. i try to open it time by time buts its not working. please help..

    please help my iphone blackout..i dont know what to do..:(

    You have done what, exactly? If the phone is displaying the iTunes logo/USB cable, you need to connect it to your computer running iTunes. There is no way to bypass that.

  • How to on my screen blackout on iPhone 4s

    My iphone 4s screen is blackout and on voice command at the same time

    Hello, luv_rossy. 
    Thank you for visiting Apple Support Communities.
    This sounds like screen curtain may be enabled.  Screen curtain is a feature that allows display privacy.  To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature.  You may need to press the home button once in order to process these steps.  If you wish to disable VoiceOver, see the link in the article below.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    If the issue persists, see the section labeled Display in the article below for additional troubleshooting steps.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H.

  • Macbook Pro - Display Blackouts

    Just curious if anyone is having this issue on their Macbook Pro 2010 model. I've got an early 2010 model (i7 2.66 with GT330M GPU). Apple AHT shows no problems. All updates installed (10.7.3), including Apple's fix for this problem. However yesterday it just went bonkers all together!
    Sunday, 12 February 2012
    17.06: Display Blackout
    20.43: Display Blackout
    20.46: Display Blackout
    20.54: Display Blackout
    21.47: Display Blackout
    Here's an extract of the report...
    Kernel_2012-02-12-170605_computername.panic
    Sun Feb 12 17:06:03 2012
    panic(cpu 0 caller 0xffffff7f80955907): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff81151f7000 0x0a5480a2, D0, P3/4
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80f1982a60 : 0xffffff8000220702
    0xffffff80f1982ae0 : 0xffffff7f80955907
    0xffffff80f1982b70 : 0xffffff7f80a45a64
    0xffffff80f1982bc0 : 0xffffff7f80a45b24
    0xffffff80f1982c20 : 0xffffff7f80cf2749
    0xffffff80f1982d60 : 0xffffff7f80a64bad
    0xffffff80f1982d90 : 0xffffff7f8095f282
    0xffffff80f1982e40 : 0xffffff7f8095ab84
    0xffffff80f1983030 : 0xffffff7f8095be57
    0xffffff80f19830f0 : 0xffffff7f817c2336
    0xffffff80f1983200 : 0xffffff7f817c282c
    0xffffff80f1983220 : 0xffffff7f817bf989
    0xffffff80f1983270 : 0xffffff7f817ee4ce
    0xffffff80f19836c0 : 0xffffff7f817890aa
    0xffffff80f19836f0 : 0xffffff7f817f1c3e
    0xffffff80f1983770 : 0xffffff7f817dc44b
    0xffffff80f19837d0 : 0xffffff7f817dc846
    0xffffff80f1983820 : 0xffffff7f817dcabb
    0xffffff80f19838b0 : 0xffffff7f817dd80f
    0xffffff80f19838e0 : 0xffffff7f817950b0
    0xffffff80f1983aa0 : 0xffffff7f817ddf68
    0xffffff80f1983b60 : 0xffffff7f81792119
    0xffffff80f1983bc0 : 0xffffff800065239e
    0xffffff80f1983be0 : 0xffffff8000652c7a
    0xffffff80f1983c40 : 0xffffff800065341b
    0xffffff80f1983d80 : 0xffffff80002a3b78
    0xffffff80f1983e80 : 0xffffff8000223006
    0xffffff80f1983eb0 : 0xffffff8000214829
    0xffffff80f1983f10 : 0xffffff800021bb58
    0xffffff80f1983f70 : 0xffffff80002aeb80
    0xffffff80f1983fb0 : 0xffffff80002d8383
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(7.1.8)[94BA87BA-B128-3310-9860-98EC67AB7FAF]@0xffffff7f808 f5000->0xffffff7f80bcefff
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80880000
                dependency: com.apple.iokit.IONDRVSupport(2.3.2)[4B3F84DC-18B3-3897-BC56-4E3940878047]@0xff ffff7f808e3000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[FE536983-1897-3D6B-965E-24B5A67080DA]@0 xffffff7f808ab000
             com.apple.nvidia.nv50hal(7.1.8)[7596DB8C-AE9D-3C87-B11A-0ED8F940CAF8]@0xffffff7 f80bcf000->0xffffff7f80ef0fff
                dependency: com.apple.NVDAResman(7.1.8)[94BA87BA-B128-3310-9860-98EC67AB7FAF]@0xffffff7f808 f5000
             com.apple.GeForce(7.1.8)[61FD1644-DA39-3645-9380-7F490FB000DB]@0xffffff7f817870 00->0xffffff7f81846fff
                dependency: com.apple.NVDAResman(7.1.8)[94BA87BA-B128-3310-9860-98EC67AB7FAF]@0xffffff7f808 f5000
                dependency: com.apple.iokit.IONDRVSupport(2.3.2)[4B3F84DC-18B3-3897-BC56-4E3940878047]@0xff ffff7f808e3000
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80880000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[FE536983-1897-3D6B-965E-24B5A67080DA]@0 xffffff7f808ab000

    That's the classic one. Checkout https://discussions.apple.com/thread/3278966. At the end Logic board replacement is the only solution.

  • I have a blackout covering the red X and minimize window in upper right corner. How do I get rid of it?

    Windows performed an update yesterday and now I have a shield in the corner of my Foxfire icon and I have a blackout over the red X and minimize window in the upper right corner when I sign on to Foxfire. How do I get rid of it?

    The large "X" means that the image is still marked as hidden, but as you see the hidden photos, you now have turned on "hidden Photos" in the "View" menu of the main menu bar.
    To remove the "Hidden" mark, select the image in the event and use the command "Photos > Unhide Photo ⌘L"
    Regards
    Léonie

Maybe you are looking for

  • G4 upgrade now one monitor won't power on

    ANY HELP WOULD BE APPRECIATED! I'VE BEEN UP ALL NIGHT!! I put in 2GB of RAM today along with a super combo (DVD, CDRW) drive. I tested the machine with a single monitor at work, it was fine. When I got it home and hooked it up to my dual monitors, on

  • Why is my memory usage so high?

    This memory usage really shouldn't be okay, from having Chrome, Activity Monitor, Steam, and Skype running. I'm pretty sure the problem isn't that I don't have enough RAM. Does anything here look like is easily fixable?

  • New install creates duplicate files

    I'm new to the IPOD/ITunes combo. I installed everything on the computer, opened ITunes, and it started converting files. I understood when it was doing WAV files, but it seemed to be converting MP3 to MP3 then adding a " 1" to the end of the file na

  • A website is asking me to install Adobe Reader but I've already installed it...

    Hi! I'm trying to access a part of a website and it's asking me to install either Adobe Reader (or Adobe Acrobat) to access the content of the website. Here's what it looks like: It's written in French but it translates to For better results, open th

  • After install wifi profile(802.1X), the wifi network can't automatic connection

    I want to connect a wifi network that uses 802.1X , and this wifi network support profile. when i install this wifi network profile, it can't been automatically connected. Can 802.1X network been automatically connected? or is issue in the profile?