Blacks out after playing video

My ipod blacked out after playing a video I downloaded from Itunes music store. Not responding, does anyone know how to solve this?

There is no screen event triggered when the video finishes playing that you can use to jump to the next slide or unhide a button to enable the user to navigate forward at a time of their own choosing.
If you know the duration of the video, you can place a navigation button on the timeline at that point so that it appears just after the video finishes playing. However, you may find that on different PCs with different system specs the video may take slightly more or less time to play.

Similar Messages

Black screen while playing video in itunes

I am currently running itunes 11.1.2.32 on a windows 8.1 (64 bit) pc. I had to reinstall itunes when switching from 8.1 preview to 8.1 due to download issues. I now have a black screen when playing videos in itunes. Audio still works. Suggestions?

I've had the same problem. Tried switching from the built in Intel video to an nVidia graphics card, reinstalled cursed a lot.
Finally got it working the hard ware. Built a virtual XP machine (like the SP support system in Windows 7). Installed itunes in the virtual machine and can now watch my movies and tv shows. Both itunes and Windows 8.1 seem to be "not ready for prime time". I wish MS wouldn't have tried to make a computer look like a cell phone/pad.

Ipod 4g goes black out while playing games

i dont know whether you guys have experinced this but my ipod 4g goes black out while playing some games. its like when im playing games half way, the ipood will auto close the app that im playing. Does this means that my ipod is having problem?
Btw My IPOD 4G WAS JAILBREAK BEFORE.BUT I RESTORE BACK NORMALLY

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Black screen after music videos shuffle ends

1. After playing music videos that have been synced, the screen went black. (Videos were purchased via iTunes.) Since no menus were visible, had to reboot to get menu back. 2. How do you turn off the music sound after moving out of "my music" menu?

oldephart wrote:
1. After playing music videos that have been synced, the screen went black. (Videos were purchased via iTunes.) Since no menus were visible, had to reboot to get menu back.
Is this repeatable, or perhaps a one off glitch.
2. How do you turn off the music sound after moving out of "my music" menu?
Sometimes I find that annoying too, however that's what it's supposed to do. You can either begin to play some other content (excluding photos) or go back to the music selection and stop the track that's playing.

Pinwheel when trying to close safari/firefox after playing video

i've only noticed this on the nytimes.com website after playing their video content (youtube works fine). in both firefox and safari: every single time i play a video, if i pause it or stop it and then try to close the tab it is in or the application, i get the pinwheel and no matter how long i wait for it, it does not come back so i force quit. i've tried updating/reinstalling, but nothing seems to work. also episodes/shows via abc.com do not play at all - tried reinstalling/updating those plugins/apps as well. this is happening on both macbook pro and macbook with updated versions of leopard... thoughts?

This seemed to come out of the blue, very much as described by anima42. I also am a Ubuntu 10.04 user. I have pondered on the first reply above, and though I don't, and didn't, use Tabberwocky, I was using Tab Mix Plus. Having removed this, the problem seems to have gone away. Another possible clue as to what went wrong: I use a constant Firefox profile located in my home directory. I dabbled with Ubuntu 11.04 a week or so ago, which runs (I think) a more updated Firefox. This Firefox was operating on my default profile, as you would. It may have broken something so it now doesn't play nicely with the 10.04 setup. Just surmising.

Most of apps blacked out after I transferred purchased items??

When updating my iPad Air, a message popped up, saying that I may need to transfer my purchased items to the iTunes library before updating, so I did so.
First, why do I need to do this? Will I lose anything after I update?
Second, after I did this and all items were copied to my library, my storage was full (0 bytes available) after having 980 MB free. However, this isn't the issue; most of the apps during the transfer were blacked out like apps are before they are downloaded from the AppStore. I tried to open one of them, iBooks. It told me 'waiting' and is still like that ever since. Why is that? How do I open them again?
Thanks for any help.

The fact that you only have 980 MB available is a problem. You need to leave some space on the device for fragmentation and that's just not enough space at all. So that means that your device is overloaded at this point. When you transferred the purchases and then tried to sync them back, the storage was at its limit. Maybe something got fragmented and put you over the top but now you need to delete some content before those "waiting" apps will finish syncing.
You always want to transfer purchases into iTunes in the event that the app, song, video, book, etc., is no longer available for download, you will still be able to sync it back to your device if you remove it from the device for any reason. Also, If you don't transfer it into iTunes and you sync without doing so, that will erase it from the device because when you sync with iTunes, you transfer the contents in iTunes to the iPad. If the content isn't in iTunes, it will be erased from the device when you sync. Does that make sense? I hope I explained that clearly enough.

27 inch thunderbolt display blacks out after Thunderbolt Firmware Update 1.2

Bought 2 new 27 inch TB displays for two different machines and after a couple of days the Thunderbolt Firmware Update 1.2 appears on my Mac Pro with one of the displays installed. So I install the firmware update. Now my display blacks out periodically and I keep getting Graphic Display Errors with a request to sent the errors to Apple. Running a 32 GB Mac Pro (late 2013 circular style) I have three monitors connected (two 20 inch cinema displays and the new 27 inch display). This machine is supposed to be able to handle three 4k monitors or 6 standard TB displays. I've seen the posts about the blacking out with this monitor but I didn't have any problems before the firmware update and now I've got them pretty regularly. I had the blacking out problem on an earlier monitor and took one of the monitors back and Apple gave me another one and this is the replacement. Same problem, but this one only started after the update. I'm hoping someone from Apple reads these messages and can let me know what's up.
BTW, I also have an older 27 inch Apple monitor that ran perfectly on this machine so I'm disappointed that I spent all this money and now get the blacking out issue.
Mac Pro (Late 2013)
Processor 3.7 GHz Quad-Core Intel Xeon E5
Memory 32 BG
Graphics AMD FirePro D300 2048 MB

I have my Thunderbolt display connected to my MacBook Pro and have been experiencing the same issue, getting worse over time. The folks at my local Apple store did not know what to do about it. So, I looked around and tried different thing.
The one thing that seems to be working is to System Preferences > Build-in Display > uncheck “Automatically adjust brightness.”
I hope this helps.

Screen blacks out after a few seconds and won't return to normal state.

I have the 30 gig ipod photo that i got about a year and a half ago. Whenever I look at the screen to access music or anything, the screen blacks out like there's a screensaver or something and won't return back to normal. Even after I reset it, it stays normal for a few seconds and then blacks out again. The backlighting still works so it's just a bright black screen and I have function of the click wheel because it clicks everytime I move up or down. I already tried restoring it so I am all out of options. Anyone PLEASE HELP!!! Thanks
Steve

This happens rarely but consistently! I't seems to happen about 5% of the time waking from sleep. It MAY be more prone to happen if I had been moving with it in my bag, but it can happen at any waking time after any duration of sleep.

Freezes after playing video playlist

My 60G freezes after playing my video playlist. I have to wait until the battery runs down then plug it in to reboot it for it to work again. I took it back to Best Buy where I purchased it, and they installed the latest update. They claimed this would fix the problem. Wrong! Any suggestions?
Thanks!

There is no screen event triggered when the video finishes playing that you can use to jump to the next slide or unhide a button to enable the user to navigate forward at a time of their own choosing.
If you know the duration of the video, you can place a navigation button on the timeline at that point so that it appears just after the video finishes playing. However, you may find that on different PCs with different system specs the video may take slightly more or less time to play.

Web dialoge boxes blacked out after safari update

After the last update to Safari 5.1.7 (7534.57.2) web dialoge boxes are blacked out in google Sketchup Ver. 8. The only reason (we) suspect it was Safari is a recent thread at Sketucation fourm in which many users of Sketchup that use Lion 10.7.4 seem to be the only ones effected by this maybe someone here can shed some light. There seems to be a workaroud in Sketchup by changing some css file but it's not working fo all dialoge boxes.
http://www.sketchucation.com/forums/viewtopic.php?f=11&t=45382&sid=6392c06695a2c 69741e9ae1167e197c7&start=15
Thanks much will reply to any good advise

After the last update to Safari 5.1.7 (7534.57.2) web dialoge boxes are blacked out in google Sketchup Ver. 8. The only reason (we) suspect it was Safari is a recent thread at Sketucation fourm in which many users of Sketchup that use Lion 10.7.4 seem to be the only ones effected by this maybe someone here can shed some light. There seems to be a workaroud in Sketchup by changing some css file but it's not working fo all dialoge boxes.
http://www.sketchucation.com/forums/viewtopic.php?f=11&t=45382&sid=6392c06695a2c 69741e9ae1167e197c7&start=15
Thanks much will reply to any good advise

Audio garbles after playing Video

I got a new 30G iPod and downloaded all my iTunes, Audible and mp3 files. I then purchased from iTunes a video. All the audio (mp3, itunes, audible) play fine until I play the video. After I play a few seconds of video and return to playing audible files they garble. It appears going back and playing mp3 or iTunes audio "resets" so I can then play audible files (until I play video).

This is a known defect of the 5th generation ipod. Hopefully they will fix it in a software update.
PC Windows XP 2.8 GHz

Screen blacks out after latest itunes update installed

last year after installing an update for itunes my screen blacked out. it then intermittently worked for a few days before failing permanently. this was later fixed by replacing the inverter board. i didn't suspect the two events were linked. however, yesterday i got the latest update for itunes and again a few minutes after installation my screen blacked out! deja vu... it seems unlikely but is it possible the screen fault is caused by updating itunes?
this morning the screen is working again and i have run system restore to undo the installation. fine, but when i try to open itunes it starts installing again.
AJP 5600D laptop PC Windows XP

Thats odd. Not sure what this error means, but you could always try repairing disk permissions, that seems to solve most of the random errors that occasionally pop up on my OS X macs. Load the OS X install dvd into the drive then restart your machine holding the C key. choose english as the main language. Then go into the utilities menu and select disk utility. Click on your hard disk then click the repair permissions button. Once completed, restart the computer into OS X. Then try your screensaver again. If this doesnt work, post again and I'll take a closer look at it.

My secondary monitor flashes and blacks out after the 10.7 install. Any ideas on how to fix this?

I have installed 10.7 and the secondary monitor flashes and blacks out. I downgraded back to 10.6 and the problem went away. I reinstalled 10.7 and the same problem happened again. The monitor blacks in and out especially when the pointer is placed in the dock area, but it still happens all the time. My secondary monitor is a ViewSonic 22 inch that is connected to a DVI to display adapter. Any solutions??
Thanks

Talked to AppleCare and it's most likely the fact that my MacBook has 3.0 USB ports and my non official charging cable can't support that. So yeah, I'll try a new cable, hopefully that's the fix.

Iphoto 11 thumbnails partly blacked out after importing

My existing library of approximately 12K photos in iPhoto 11 appears fine with no problems. However, now I find that when I try to import new photos into it, the thumbnails as well as the imported photos are partly blacked out. The import process takes longer than it should as well. The same photos are imported correctly into Lightroom so they are not the problem. I've rebuilt the library and the thumbnails, but the problem continues. Any suggestions? Thanks

Have a read of this thread:
RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
It describes how to delete and reinstall the Raw support. It has worked for some folks.

Blur or black out portion of video

Does anyone know how I can blur or black out a portion of an image in a clip? I've got a guy with his company name on the back of his jacket, which he wants to blur out, but the rest of the clip is good. I have no experience with doing this. I am using Final Cut 6. Can someone please help me?
thanks!

you can also search the forum for COP BLUR and similar terms, we see the question at least once or twice a week.
If you need to do this often or with precision or elegance, you probably will want a Cop Blur filter package for Motion. Does anyone have a master list site for all plugins being made for Motion? You may find these helpful
http://www.applemotion.net/
http://www.applemotion.net/
http://www.motionsmarts.com/
http://embryo.me.uk/wp/category/tutorials/
bogiesan

Blacks out after playing video

Similar Messages

Maybe you are looking for