Blank builder screens after upgrade to 4.2

Apologies in advance for another "blank screen" installation post.
Scenario: upgrading from 4.1 to 4.2 on 11gR2 using AS 10.2 as my listener. After an apparently successful upgrade, all my upgraded applications look fine, but the builder login screen comes up blank.
I HAVE been careful to check and double check that the 4.2 images seem to be in the right place. My dads.conf has the following entry
Alias /i/ "/u01/test_10gr2_hm/apex/images/"
I deleted the 4.1 images from this location and copied in the contents of the images folder from my 4.2 download. I have verified permissions. The file names and sizes in place look the same as on the distribution.
On reviewing the installation docs for my scenario, the only thing I seem to have muffed is using the generic apex_4.2.zip instead of apex_4.2_en.zip. My target is English.
Thanks for any suggestions.
and Merry Christmas!
Steve

I reverted to my 4.1 install.....re-tested and the applicaton works fine.
Then re-upgraded to 4.2.1 again and re-test the app again. It fails again on the same error in the debug table....Error when setting security_group_id: APEX.AUTHENTICATION.WORKSPACE_NOT_ASSIGNED
Are there any upgrade steps I am missing? The upgrade log looks good and reports that the upgrade was successful.
@apxrtins.sql TBSP1 TBSP2 TEMP /i/

Similar Messages

Blank black screen after upgrade

Ready for chucking BT Vision box through the window. Ever since BT Vision upgraded earlier in the year it keeps shutting down and restarting for no apparent reason, sometimes up to six times a day. Sometimes it goes for days with no problem. The current problem is that yesterday it shut down and restarted with a message that it was going to install a new upgrade. It then went through the process of downloading an upgrade tool. At the end it displayed a message that the download was successful and it would now begin installing the new upgrades. The screen then went black with no error message. It would not respond to any commands and wouldn't switch off. I tried forcing a restart and switching off and unplugging everything and restarting the hub to no avail. All it does is go through the whole routine again with the same end result. I tried leaving it in that state overnight, thinking that it might update or correct itself through time but still the same. It just sits in the corner of the living room staring at me malevolently.

In the end we gave up and did a factory re-set (left and bottom button) so lost all our recordings - what a stupid system!
We had tried every method of resetting and rebooting before then and nothing worked. Plugs in and out, hub rebooted, black adapters reset, power cables in and out, OK and bottom buttons etc and every time when it restarted it downloaded new software (or so it said) and then kept rebooting until every time it just stuck on a black screen which we seem to have spent hours looking at since Wednesday!!!
Anyway all is working OK now - fingers crossed - just no recordings to watch. I'm trying not to think of all the lovely interesting programs I had saved for a 'rainy day'.

I have blank iTune store screen after upgrading to 10.5 on my Window 7

I have a blank iTune store screen after upgrading to 10.5. Can only see the account details but no apps nor podcasts.

Try rebooting your computer and then your iTunes.

Black Screen After Upgrading to Windows 8

Hi
I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
Urgent assistance needed

This problem is solved...
I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company.
But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so...
1) Boot the Laptop/PC.
2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
3) Wait for 1 minute so that drivers load into the memory.
4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
5) This will force the laptop/PC to go into Sleep mode.
6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
7) After 4-5 seconds, press the power button again & release it quickly.
8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P
This is not the permanent solution. It just lets you start you Laptop/PC.
After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

There is a blu line at the top of my screen after upgrading to iOS 8.3. How can I get rid of it?

Why is there a blue line at the top of my screen after upgrade to iOS 8.3?

Try the basic troubleshooting:
Restart / Reset
http://support.apple.com/en-us/HT201559
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252

Lost you tube from home screen after upgrading to os6?

I've lost you tube from home screen after upgrading iPad software. Is this normal?

Sorry, no YouTube in IOS 6.
You can use the iPhone version of YouTube or Jasmine
http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

Blank Email Screen after 4.3.2 upgrade

After upgrading my iPhone 4 to version 4.3.2, mail opens with a blank screen for a couple of seconds then goes away. Any idea why? Resetting/rebooting is without effect and it works fine on my iPad.
Joseph

Same issue here on an iPhone 4 16gb. Was having minor issues here and there with 3G connectivity and signal strength to AT&T. Saw the update released for 4.3.2 and that some issues were fixed with connectivity so decided to upgrade to it hoping it would be fixed. BIG mistake.
Now on 4.3.2 where I used to get 4-5 bars standing on my 2nd floor balcony outside I am stuck at 1 bar sometimes 2-3 very very briefly and then back stuck at 1. 4-5 bars I haven't seen since the update and reception quality and 3G speed/reliability is gone. This phone now isn't a very mobile device if I cannot use the Internet/gps unless I'm on wifi and call/texting is just down the ******* now especially if I'm inside ANYWHERE. In the silicon valley California near plenty of towers daily but 1 bar is all I can yield from the phone now regardless.
I'll be going into the apple store nearby tomorrow to either get this phone downgraded to 4.3 or 4.3.1 even as it was never this bad where I cannot rely on it while mobile OR get it exchanged for a brand new one that is not on that firmware version.
I'm not going to even get into the other problems I've already seen in 4.3.2 as they are unrelated to the topic. But wow apple, do you even test your firmware updates ONCE aside from turning on the phone post update and being like "oh it works, alright it's ready" before releasing them to the public?
Comparing my girlfriends iPhone 3GS next to mine on the desk she has 4-5 bars steady while mine sticks at 1 and jumps to 2 or 3 for a second before falling again. She is still using the 4.3 firmware. I think you broke somethin apple, get it fixed ASAP.
Missing this kind of bug/issue makes you wonder if Apple actually has a quality control team employed there anymore lately.

Arabic calender blank in GL after upgrade to 12.1.1

Dear All,
Arabic calender blank after upgrade from 12.0.6 to 12.1.1 in GL application screen, how could i troubleshoot.
english calender working fine,
this arabic calender showing, its blank when we click the date.
please advice me pls

Hi;
Is there any error message at apache,application log file?
Regard
Helios

BPS screens after Upgrade to NW04s

Hi,
After upgrade to NW04s, the BPS screens that we were using to input data to transactional infocubes, doesn't work any more
it says :
Message Number UPP_LB009
Long Text Diagnosis
The environment (planning area or level) of layout ZMACTI1 () has changed. In this form, the layout can no longer be used for planning.
System Response
Procedure
Call up the layout in change mode and make the necessary adjustments.
Is there any note talking about this issue ?

Hi mohamed,
Did you try going in change mode in the three screens of the layout builder? At that time it may also point out the characteristic which is creating the issue.
Cheers,
SK

Cannot open customize OAF screen after upgrade to 12.1.3

Hi,
After upgrade to 12.1.3, I am not able top open customize OAF screens from Applications.
By following some documents from MOS, I have done the following.
1)-applied patch 9879989 on Linux server.
2)-I am able to install JDeveloper,open and compile my customize programs from JDeveloper installed on Linux server. I compilation, new *.jpx files created from *.jpr
From Oracle Applications, I am getting the same error that I was getting without compiling customize program.
My question is that, how Oracle applications will read the new compiled program. Do all program need to be in specific unix directory ?
I copied all the customized program under " /u01/oracle/jdev_install_dir/jdevhome/jdev/myprojects" .
I think the problem is now to place OAF files in the problem directory, which I don't know.
Do I need to set environment variable like JDEV_USER_HOME in the environment file ?
Please help.
Best Regards

Not sure if your issue is resolved. Did you compile the java sources in JDeveloper and moved all files from myclasses folder to unix under $JAVA_TOP or appropriate directory and deployed the PG files using xmlimporter?
Thanks
Shree

Blank White Screens After Installing Lion in Software

Before I start, I have a Macbook Pro 5,1 -- 2.66Ghz Core2Duo with 8GB of RAM, 500GB 7200rpm HDD, and an nVidia 9600GT M Graphics card
I installed Lion. This install was an UPGRADE from 10.6.8. Most of my apps arent working at all. Adobe CS 5.5 Master Collection, Final Cut Pro, Ableton Live, and even Time Machine.
They all just open up and give me a blank white screen (literally, a window, and instead of there being stuff inside the window its just a big giant WHITE BOX OF NOTHING). Time machine actually shows me the selected finder window but i couldnt select any older time machine dates.
Additionally I tried dragging icons off the dock, and it froze up my entire machine just by dragging them off the dock. I had to right click on icons to remove them.
I finally booted up into the "Recovery HD" and recovered my Time Machine backup to Snow Leopard 10.6.8 that I was using before.
I would very much like to use Lion, but it seems to have alot of problems with my machine. Should I do a completely fresh install maybe?
Any other solutions?

I have reverted to a backup from yesterday in which Lion was first installed and ran without problems. But this time, the windows of my apps were still white.
I also tried creating a new user account, thinking that there was a chance that it was a conflict with a piece of 3rd party software. Not that I can rule out software conflicts, but I still had the same problems.
So I'm now reverting to Snow Leopard. Ugh…
At least the "Recovery Partition" is pretty cool ;)
-Chris

Build error after upgrading from 8.2.1 to 8.5 "Error 1055 occurred at Invoke Node..."

After upgrading to 8.5, I'm getting the following error when trying to build an EXE:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1055 occurred at Invoke Node in AB_Source_Library.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Object reference is invalid.
I have been building this application for both Windows and Mac OS, and I even get the same error when building the .app on an Intel Mac.
Things that I've already tried:
* Mass-compiling all my code
* Created the project from scratch
* Enabled each panel of the "diagram disable structure" one at a time and compiled again
Any ideas?

Hi Travis,
Ben’s advice if definitely the best place to start. Error 1055 is a very general LabVIEW error for “Object reference is invalid.” The cause is usually a bad install where important LabVIEW function aren’t placed in the right directory or aren’t installed at all.
Charlie M. CLD

Satellite L500 - blank blue screen after login to Win 7

Hi
I have this laptop and i can start up the laptop and it loads fine to the login page i then can login but when the screens opens after login it appears as a blank blue screen with the document folder open i have no background picture and no startup menu nothing else except the document folder.
From there i can access my files etc and anything else internet etc everything but i dont know how to get the screen back to normal.
If i go on background display i can see the image that should be on the background and change it but nothing happens on the full screen.
I have no restore point as yet as new laptop for xmas, i do have backup discs but think its just something to do with the display.
If go into files and folders it shows me the icons on the desktop but all i see is this blank screen.
Any ideas please, if not would restore files work or full back up disc
Thanks very much for any help

Hi
Check this:
Click right on the desktop and choose Personalize.
There you should check the area: Basis design and design with high contrast
Choose Windows 7 basic.
Then reboot the unit.
Usually this should help to get the Windows 7 common design and desktop settings.
But if this will not help then you could use an fast solution which would be a usage of the recovery disk of HDD recovery option.
This would format the HDD and would reinstall everything again

Black screen after upgrading ram (macbook pro late 2007)

Dear Community,
I am willing to donate 100 USD to anyone who is willing/able to provide concrete resolution to this problem.
I am a professional freelance videoeditor and my job is currently stucked due to inability to boot my macbook pro again.
After upgrading the RAM of my MBP (late 2007 model, 17'' display, Intel 2.4GHz Dual Core processor), the screen went black and the system did not boot any more.
I tried to replace the orginal 2 x 1GB DDR2 533 CL=5 SODIMM (single rank) with 2 X 2GB DDR2 800 CL=6 SODIMM (dual ranks).
After the memory upgrade, the system was restarted, I heard a short beep, but the macbook showed a black screen instead of booting properly. The mainboard was powered, the fan was moving. I saw a green led turned on on the center of one side of the macbook.
I tried to mount the previuos 2 x 1GB DRAM SODIMMs, but nothing happened. The system keeps not booting even with the original memory.
I tried already several procedures suggested by the user manual, related to SMC Intel controller reset (with battery and without battery and charger), but those were not effective in restoring the normal operation of the macbook. The system keeps not booting with exactly similar issues (black screen, fan on, short beep after power-on, green LED on).
I also tried to swap the memory DIMMs into the memory sockets. I tried to use a different combination with 1 NEW 2GB and 1 OLD 1GB DIMM. But the problem is still there with similar sympthoms.
DOES ANYONE HAVE ANY CLUE OF HOW TO SOLVE THIS?

My best guess is that you have fried the RAM with static electricity charged up in your body. According to OGELTHORPE a beep on startup is because of no RAM, if when installing you did not do it correctly, you could have fried the RAM, which then your mac will not recognize it. The same with the old RAM, if you tried to re-install it and didn't pull up your sleeve and rest your arm on the inside of the chassis, then it is fried, or if you didn't wear an ESD band and connect it to the the chassis, then it is fried.
Seen as though you can't startup your mac, I can't say to do an AHT, buy some new ram, and start with the lowest one you can, so its cheap for ya use a different company incase is that;) Crucial.com is really good, I got an 8gb upgrade from 2gb. Let me tell you, it's great!
Reply back;)
Chris

Build problems after upgrade to 8.1 SP4

I have a web application that uses custom tag libraries. The source files for these are in my web project's WEB-INF/src.
With SP3, everything built fine. With SP4, the only way I can get the application to compile is to deactivate "precompile JSPs." Otherwise, I get errors such as
<b>ERROR: admin-projectDynList.jsp:36: The tag handler class was not found "ossrm.tags.TextBox".</b>
I'm assuming this happens because the JSP is compiled before the classes in WEB-INF/src, though I'm not entirely sure this is the case. During the build, I am also seeing errors with the NetUI tags--but I think those stem from the earlier errors.
I am using the IDE build. The application has one web project. I did upgrade the project libraries after upgrading to SP4.
Could this be an upgrade issue? A stray setting? This is a show-stopper, as I cannot build the full EAR for test deployment ... your help is greatly appreciated.
Thanks,
Steve
Message was edited by:
sdorato

Hi lottpaha,
Sorry to hear that you are having issues with your iPad not seeing the SIM card. For that, take a look at the article below to give you some troubleshooting to get it working again. If it does not work, then you will need to contact Apple for additional help.
Get help with the cellular data connection on your iPad (Wi-Fi + Cellular Model)
http://support.apple.com/en-us/HT203613
Take it easy,
-Norm G.

Blank builder screens after upgrade to 4.2

Similar Messages

Maybe you are looking for