Blank cdr and dvdr not being "detected"

I can insert a DVD or CD with data on it, But when I put in a cd/dvd with nothing on it none of my burning applications detect that its in there. Also, nothing in thunar is shown about it. I have not been able to find anything on the forums about this.

same happens to me, after having some problems to start brasero: http://bbs.archlinux.org/viewtopic.php?id=84244
this is the output of dmesg. I guess it shouldn't be an error as I inserted a blank CD:
cdrom: This disc doesn't have any tracks I recognize!
sr 3:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 3:0:0:0: [sr0] Sense Key : 0x5 [current]
sr 3:0:0:0: [sr0] ASC=0x21 ASCQ=0x0
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Recently brasero has been updated, I don't know if it has to do with this issue. Now I'm using brasero-lite package from AUR but with not success. I'll try XFburn...
Last edited by pichulines (2009-11-11 14:28:23)

Similar Messages

HT4061 my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

USB buss and monitor not being detected

I've been having an issue this last week, where when I start up my Mac Pro does not output video. Judging by the hard disk sounds, it is booting up, but it doesn't detect the video. I think there is an issue with the USB bus, because if I remove all usb devices (including the keyboard) when it boots up it will send video to the monitor.
I've felt since I bought the computer that something hasn't been right with the usb system, it isn't entirely hot pluggable as it should be, and sometimes some peripherals seems to be competing for resources, i.e. if I hook up a phone to sync via USB my USB midi system will won't be detected. Since Snow Leopard these issues have gotten worse, but it could just be coincidence and be an underlying hardware failure that has chosen become worse.
The times when the monitor isn't being sent video, if I press any key on the keyboard it will make a clicking sound through the built-in speaker.
Anyone experience anything similar? I would run the hardware diagnostic utility, but because I need to hold down the 'd' key on the keyboard, and having anything plugged into USB prevents it from detecting the monitor I can't run it. Thanks.
Message was edited by: Eugene Scalisi

Hello Eugene,
Interesting - possible - coincidence. I just posted about a similar seeming issue here:
<http://discussions.apple.com/thread.jspa?messageID=10425731#10425731>
Notice that I've checked Disk Utility's repairs report as well as the System Log with Console: both show mention of USB related items.
This may not have anything to do with your issue but I thought it worth mentioning.

Blank CDR and DVD not shown in finder - impossible to burn from Burn Folder

Since I have installed Snow Leopard on my Imac, Blank CD's and DVD's are not seen in the finder. No matter what I select in:
Systempreferences > CD's and DVD's (ask task / show finder etc...) the discs do not appear (I tried with all sorts).
Yet the disks are seen in Utilities > Disk Utility and also recognized in System profile.
When I make a New Burn Folder, after getting the prompt: insert disk,and inserting, nothing happens. Then I cancel, and finally get the message "The disk cannot be used because it is not recognized". I get this message with any disk type.
Using the same disks, but burning from I-tunes, I-movie, I-DVD I have no problem at all.
The exact same things happens on my Macbook, since Snow Leopard has been installed.
Smells very buggy. Anyone knowing a solution?
Thanks,
Vincentini

I am having the same problem but get no error messages.
Burn command given from burn folder on desktop, insert disc message appears, insert disc, 30 seconds later disc ejects, no message, no burn?

My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

IPhone 6 and iPod Touch 5 not being detected by iTunes 12

iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2
Tried changing the lightning conductor, that didn't help either.
Re-installed iTunes but it was of no use. :/

See iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Iphone 4s not being detected by windows 8 laptop and itunes

Hey all,
My iphone 4s is stuck in recovery mode and my laptop is not detecting the iphone when i plug it in. I plug in my other iphone and ipods fine but this iphone 4s is not being detected so i know it is not the cables. I have uninstalled all of the apple apps and drivers from my computer including itunes and re-installed them again and still nothing. When i turn on the iphone it shows a blue itunes logo with a cable indicating for me to connect it to my laptop, but it turns off after 30 seconds which doesn't allow it to restore thus a notification shows up on itunes saying that the iphone could not be found.
I downloaded the latest version of ios, but could not install it since the iphone is not responding. so right now it is basically a paper weight.
Is there anything i can do?
thanks all....

Hello Bethany2
Try creating a different user for your computer and open iTunes to see if shows up in that newly created user. The article below will home a few more troubleshooting steps, some of which you have already tried.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

I am making an iMovie trailer on my iPad 3(updated) and I recorded a few clips on my iPad Camera but they are not being detected on the iMovie Videos section. How can I make them show up?

I am making an iMovie Trailer on my iPad 3 (updated) and I recorded a few clips using my iPad Camera but they are not being detected on the iMovie Videos scetion. How can I make them appear so I can use them in my trailer?

Hi Stuck-in-NY,
If you are looking to transfer your purchases to your computer, you may find the following article helpful:
Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Regards,
- Brenden

HP 550 charger not being detected?

Hi, I currently have a problem with mY HP 550 charger i have not been able to use my computer for over 6 months cos of this. the laptop is around 3 years old, a while back my charger was working normally and then all of a sudden it stopped working... it wasnot charging the laptop at all..... I have tried to put it in again and again...the charger is still not being detected. andi t wont charge the battery.. I had to resort to using libary computers (ughh my god there slow) so now my laptop battery is dead.... I decided to try and fix my laptop today..... when I put my laptop charger in the light goes bue then white and then it just goes blank.... tried it with the another AC adapter which is compatible with my laptop still not working... tried my PS2 AC adapter not working... HOW CAN I FIX THIS?!?!

Please be careful what adaptors you plug into your notebook. Some adaptors have different voltages and amp capability. You can damage your notebook if you apply too much voltage. I believe your adaptor should read 18.5 volts, 3.5 Amps and 65W but that information should be printed right on the adaptor. Make sure you don't use and adaptor you should not be using. Have someone test your adaptor to make sure it is putting out the correct voltage. Try to remove the battery and just plug in the power adaptor and see if you can turn on the machine. Try to reset the machine by removing the battery and the power adaptor and holding in the power button for a full minute, then plug the power adaptor back in and then the battery and try to start the machine. Let us know what happens.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Mat****a UJ-846s drive doesn't play CDRs and DVDRs

I think the drive is a Mat****a drive, uj-846s.
It used to play and read CDRs and DVDRS but now it doesn't.
How can i fix this?
The computer doesn't even aknowledge there is a disk in the drive now when i put one in unless its blank.

It looks a little bit like a hardware problem. What do you think?
Before I will suggest the CD/DVD drive replacement you should remove the drive from device manager and should reboot the notebook.
After new reboot the OS will install the CD/DVD drive again
Furthermore you should access the registry and should remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Last bbut not least you should try different CD and DVD mediums.
If this wil nto help the chances are that the drive malfunctions and must be replaced.

Hp v235r flash drive not being detected on my computer

Hi,
I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

Hello budda48,
Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
Open Computer Management by right clicking on Computer and clicking Manage.
Click on Disk Management. Give it a moment to open the view of the drives installed.
Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
Right-click the unlabeled drive and click Change drive letter and paths…
Click Add and then click OK to select the first available drive letter.
If the Change drive letter and paths… option is not available, make sure that the drive is Online.
If the drive is Offline, right-click the disk number and click Online.
Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
Remove the pen drive from the computer if it’s attached.
Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
Choose the Advanced tab and click on Environment Variables… button at the bottom.
Under System Variables, click on the New… button
Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
Click OK on all the open windows to close them out.
Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

HT203128 My iPad is not being detected by iTunes after I updated to the latest version of iTunes. What should I do?

After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync. Any solutions?

A few things to try. Any one or a combo mayhelp
Reset your iPad.
Hold down the sleep and home keys for about 20 seconds. Then plug it back in and see if it is seen now.
Try a different USB port
Reboot your computer
If you have a PC:
If that doesn't fix it, go into the control panel, add/remove programs. Uninstall iTunes, apple Mobile device service, apple application support.
Then redownload and reinstall iTunes. then try again.

My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
Regards.

Blank cdr and dvdr not being "detected"

Similar Messages

Maybe you are looking for