Blank cdr not recognized (still not answered)

i have a new intel imac 17" 1.83ghz. 2gb ram.
all has been great with this baby, i've been burning both in itunes and finder. no problems at all! and then all of a sudden itunes doesn't show the cdr anymore.
now i've tried changing it to "ask me", open finder and open itunes. when i open in finder, it's there in finder and on the desktop but still not in itunes. if i open with itunes, it will open itunes or flash the screen if it's already open and it won't show up in finder or the desktop.
now i can go to a playlist and ctrl click and burn a cd that way. but didn't it used to show the blank cd in that pane? like if i wanted to burn an mp3 cd, couldn't have i in the past dragged in the songs to the cd and then burn it?
i am fully updated on everything. this might be where it all changed. i recently installed the security update and since then, coincidentally or not, is when it happened.
i have yet to see anyone really address this. what's the deal?!
imac 1.83 intel 17" Mac OS X (10.4.7)
imac 1.83 intel 17"   Mac OS X (10.4.7)  

Is it a problem that you can't see the blank cdr in iTunes? Because you can still burn cds from iTunes... i don't think iTunes usually has or had a blank cd showing up in the source area. In iTunes Help they say that to burn a cd you have to create a playlist and then click "Burn CD" in the upper right hand corner. Then it tells you to insert a blank disk. I haven't seen anything about dragging the songs to the cd... maybe that was something they had a few years back.

Similar Messages

  • HP 5470c Scanjet on Windows 7 not recognized / will not initialize

    Scanner first set up on Windows Xp system. New HP p6710f desktop purchased last year with Windows 7 Home Premium operating system which recognized the scanner on USB and worked flawlessly . Recently rearranged the office which required disconnecting the peripherals, and now the scanner is not recognized .
    The product support area on this website says the scanner is not supported on WIn 7 .  How then did it work previously ?
    And why would HP discontinue support for a product that still has a long useable life ? Is this just a ruse to encourage purchase of new products ? Should the baby be thrown out with the wash water ?
    I am not a computer guru , but suspect a 'driver' is needed to get operational again ?
    Thanks in advance for any help offered . 

    Re: HP 5470c Scanjet on Windows 7 not recognized   / will not initialize

  • Account information not recognized: Could not reach CMS ' MachineName :6400'. The CMS on machine ' MachineName ' was stopped due to a critical error. (FWM 20031)

    I have just installed Information platform services 4.1 sp2 on a windows server 2008 R2 standard service pack 1. having 8 GB RAM.
    Central Configuration manager is in Running status but when I try to login to Cental management Console then I get following error
    "Account information not recognized: Could not reach CMS '<MachineName>:6400'. The CMS on machine '<MachineName>' was stopped due to a critical error. (FWM 20031)"
    I have CMS and AUDIT database on Oracle server and they are getting connected from my machine through SQL developer and the tables are also created under CMS and audit databases.
    I am not able to figure out what Issue is causing the Error. Below is the content of error_cms6400.log file located in the directory <E:\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\logging>.
    33007
    CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)
    35101
    The root server reported an error Initialization Failure. (Reason: CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027) CacheObjectIDs ).
    I have created New databases for CMS and audit and it is saying database is overloaded.
    Please help me rectify the Issue.
    Thanks in Advance

    Hi Ankur,
    As per the error message you entered the issue might occur because the Oracle CMS database reside in a different network or there is a network delay between BO server and database server. Please refer KBA 1706849 and try following steps.
    Confirm that the CMS database and BO server are in same network
    Try to ping database server from BO server and check the reply. The reply should come in 1 ms
    Confirm with DBA whether there are 14 connections established to CMS database
    Stop the SIA and restart your database schema. Then start the SIA and try login 
    Please let us know error messages in Event viewer if this is a Windows server and also is this a clustered environment ?
    Regards,
    Hrishikesh

  • My iPad is not recognized  and not serviced by apple there is aproblem

    That is happen when it connects to iTunes
    I try by remove and restore iTunes
    And by changing the computer
    But the problem still exist
    Thank you

    Based on what you posted, I don't understand what your problem is.
    Are you saying that when you connect your iPad to your computer, iTunes does not recognize your iPad?
    Are you trying to restore your iPad?
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • Creative Zen V won't charge, is not recognized, simply not work

    hey. couple of weeks ago i bought myself a creative v zen. i have win xp prof sp2 and everything was working fine. few days ago suddenly media explorer crashed while i was transfering music to the player. i had to reset my player. since then, my zen is simply not recognized, neither by media explorer, nor by windows itself. there's always a mtp device being found, but it won't install the drivers. i reinstalled all the drivers and all the software, i downloaded all the updates, but it's still not working. my player won't even charge itself. only if i'm lucky enough. and everytime i turn on the zen, it says that it's rebuilding the media library. does anyone know how to fix that thing ?

    Have you try running Cleanup from Rescue mode?
    Jason

  • I have created pages with WYSIWYG 6. Some of hyperlinks work well, some are not recognized (flat, not-hyperlinked text or picture). In IE everything works well. Thanks for advice.

    Hyperlinks created in some pages work normally, in another pages of the same site, they are not recognized by Firefox. Re-publishing of the pages has no effect. Please, see http://www.kramaric.eu/psychoterapia.html (hyperlinked pictures).

    The following line tells me that this is not a template file, but a document created from a template called index.dwt
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    This means that you saved a child document as a template file at some stage.
    If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

  • Usb not recognized, usb not recognized

    Just got a new Gateway windows 7 laptop. Itunes is loaded but when I plug in usb cable it says it is not recognized?

    You mean your idevice not being recognized?
    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Some Japanese keys are not recognized still in new version.

    New version of Remote Desktop client (8.0.14) still doesn’t work good in japanese key board environment.
    This is a kind of fatal trouble for most japanese users.
    In order to use IME in Japanese key board, "かな" key and "英数" key must be used as trigger to switch On/Off of IME.
    But Remote Desktop client doesn't send these key event.
    So I can't use Japanese IME! :-(
    I hope this issue to be fixed as soon as possible.

    Hi,
    Does this key work successfully in older version 8.0.13?
    Apart please note this carefully, the remote PC selects the system language of the device running the remote desktop client and not the keyboard language. When switching the keyboard language on your device, you need to manually switch the keyboard language
    on the remote PC.
    1. Open settings on your device.
    2. Tap General and then tap International.
    3. Tap Language and select the language running on the remote PC.
    4. Open the RD Client and connect to the remote PC and check if the Windows keyboard language matches the language that you selected.
    If you are receiving any error or event log then you can share for further research.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • My ipad not recognized and not displayed in iTunes

    Hello,
    i have a problem with my ipad 1 16 GB Wi-Fi,
    when i try to connect my ipad to my laptop, it nothing happend. its not displayed in itunes, nowhere. its not also beeping.
    I also have problem to charge my ipad, when i plug it in to the electric connector, its showing that ipad is not charging (but i can see that is charging slowly)
    but
    i rty a diagnostic via itunes -> no connected devices found
    i try to connect to another computer -> still same problem
    i try to change a docking cable -> still same problem
    i try restart all settings -> still same problem
    i try to go to recovery mode to detect via itunes -> still same problem
    now when I deleted all data in ipad, i can see only "connect to itunes)
    what i can do now ? is there some apple diagnostic tool, or some special usb mode to get it work ?
    please help me :-)
    thanks Matt

    I too have a problem with my ipad 1 16 GB Wi-Fi, when i try to connect my ipad to my laptop, I get devise not reconized and its not displayed in itunes, (no beeping). I try to connect to a mac pro and get nothing, I try to change a docking cable, still same problem, same problem with all pc's.
    When I connect an ipod it is found and restored no problem.
    I also have had a problem charging my iPad, when i plug it in to the an electrical outlet, its showing that iPad is not charging (but it does charge very slowly).
    Problem is before I new I had a problem I restored the iPad, now all I have is a paper weight with "connect to itunes. 
    Is there any help ANYWHERE what i can do now ? is there some apple diagnostic tool, or some special usb mode to get it work ?

  • DMG Not Recognized - Will Not Open

    After using a time machine backup to transfer my account and data (but not applications) to my new Macbook using Mountain Lion I am unable to open and install the uTorrent .dmg file from their website, (I already had uTorrent installed on my previous backup) recieving the dmg could not be recognized error. I have been able to open other dmg's and I've redownloaded in multiple browsers so it cannot be a corrupted download. I've also chaged the Gatekeeper settings to allow all and used get info to ensure it is opening in DiskImageMounter and this hasn't changed things either. Any assistance with this issue would be greatly appreciated.

    I've also have the same problem, a lot of people state that download is incomplete or corrupt. I've installed the same utorrent.dmg on my iMac and it worked without any issues.
    The guys in the uTorrent forum keep saying it's all about the download process, but I have a very stable connection no matter the time and traffic, no downtimes, the MBP is brand new, I have nothing much installed on it, just set up the Mac OS X Lion 10.8.4.
    I personally believe it might be something wrong with the dmg that uTorrent provides.

  • "USB Device Not Recognized" -- iPod Not Recognized.

    "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
    I get this error message everytime I connect my ipod. It just started doing this, it used to work perfectly fine. I uninstalled and reinstalled itunes and quicktime. I restarted and everything and then i connected the ipod first it went to connected and then it ejected a second later. Odd, I disconnected restarted the iPod then connected, now i get the above error. I tried all of the docs I could find but nothing seems to be working, it won't recognize so i can't restore it and I can't even charge it now. Though it works on my roommates computer just fine?
    Message was edited by: Steels

    I have this EXACT same problem. And my ports are definitely 2.0 USB. I've uninstalled and installed all the iPod, iTunes and Quicktime components at least 4 times. I've reset the iPod. I've read everything I can get my hands on... nuthin'... nada...
    Can anyone help?

  • 5th gen Ipod not recognized and not charging on any computer.

    Hello
    I have a 5th gen Ipod with an odd issue. I have an Ihome radio with Ipod dock in which my Ipod charges and plays everthing just fine. I usually just keep it there to charge and only hook up to my computer if I want to buy something or put other music on it. I tried syncing the other day and nothing happened, would not sync, charge, my computer would not even recognize it. I have tried 2 differnt cables, reset, have tried it with itunes started and not running on my vista computer and have also tried just to charge on a computer with XP that doesnt have Itunes installed. My daughter has in Ipod Touch that works just fine with both my cables and computers.
    Any ideas of whats wrong with my 5th gen?
    Thanks

    Try restarting your computer with your ipod plugged in. You might also try using a different USB port. If all else fails downgrade to itunes 6 here http://www.apple.com/support/
    kEat0n

  • IPod is not recognized, will not sync

    Windows XP, iPod Gen 4 U2 edition
    I have tried several troubleshooting efforts. Including the 5 R's - reset, retry, restart, remove itunes, and restore. It takes about 30 minutes for the computer to recognize the iPod when trying to do the restore. I have also tried the following tip from the support site.
    http://docs.info.apple.com/article.html?artnum=93716
    I have followed the above tips exactly as laid out. When resyncing the iPod it will start to sync and then it crashes. The computer starts acting very slow, almost to the point of not being usable. I have searched through the discussion pages and see a few people with similar symptons but no exact solution.
    Any ideas before I delete everything (except the music library of course) - ipod updater files, itunes, ipod s/w, etc.
    Dell   Windows XP  

    after restoring it once again, it has also reverted back to only syncing up to around 400 songs before getting stuck on a track for half an hour before telling me it cannot sync the ipod.

  • Flash in XP Not recognized content not run

    I've got XP SP2 with all updates. I have 1 admin user and 4
    limitied users. Limited users get warning Flash not Detected &
    to install latest version of Flash at websites. I've got the latest
    version, tried uninstalled / reinstalled several times with Adobes
    uninstaller, stilll no luck. This seems like a rights or registry
    issue. Can any one Help???
    Thanks

    Hi, I understand what you are saying about no notice, etc. This first appeared with the Service Pack 1 for Win7 and then carried over to the IE9. I hear an update to IE9 is coming so hopefully they will have a notice appear. I'd like to see a "new changes" when the browsers are updated, right along with the instructions to download/Install it.
    I'm glad that took care of the problem for you and it wasn't anything more serious:-)
    Thanks for marking your thread as answered also.
    Regards,
    eidnolb

  • Do not disturb still not working

    Hi guys,
    I just did the update to iOs 6.1 and the don't disturb still isn't fixed.
    It's showing in sleep settings (half moon at the top) when the times are no where near the sleep time

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

Maybe you are looking for