Blank DVD ejects

Hi all
I've just recently developed problems burning DVD-Rs. When I insert a black disk the drive attempts to spin up about 8 times and then spits the blank disk back out. I've read the posts about using a cleaning disk and am willing to do so, however I am extremely skeptical. Here's why: I have an old AL 12" laptop and after a year of using it the CD/DVD drive crapped out. I replaced it with an aftermarket drive. It worked for a few months and then stopped working again(with a disk stuck). A few months later I did a software update and low and behold the drive started working again. It still works today a few years later. What I eventually figured out is that I'd done a system update which caused the drive to stop working. Fast-forward to now, my drive mysteriously stops writing, still reads fine. I've just recently updated with software update. gotta say I suspect a bug. Apple?

This is a user forum and as such Apple does not answer any questions or respond in the forum. Just users like yourself. Have you tried a variety of DVD's with what results? i would take it to the genius at the Apple store and have him check out the drive.

Similar Messages

Blank DVD ejects instead of opening FINDER help please,sending it away 2mro

Hi, My macbook is getting sent away tomorrow to be repaired so i am trying to back up my documents before it goes but as soon as i insert a blank DVD instead of opening finder like it should (i have checked settings on syst prefs) it just ejects, so i have no idea what to do.
Please help...
Cheers
P.s
is it okay that im using a dvd instead of cd ??

I just tried a movie and it just started playing and was fine,, its just the blank dvds, have tried a few of them and they all seem to eject ?? :S

Blank DVD ejects itself when inserted

I'm trying to upgrade my computer, so I inserted a blank DVD to back up my data... But all it does it go in, make bit of noise for about 5 seconds and then eject itself. I get no message on the screen about a problem... am I using the wrong DVD or something? My brother got it.... sigh it says: "DVD +R 1-16x speed 4.7GB"
haha i really dont know what that means, but anyway, if anyone has any idea how to solve the problem please reply....
thanks...

nikkiiiii,
A couple of questions here might help narrow down the problem.
What eMac model exactly do you have? Is it a cd-rom or combo or superdrive? I assume it is a superdrive in that you are trying to burn a dvd but I ask as some users think that a combo or cd-rom drive can burn to dvd disks.
Also, have you ever been able to burn dvds on this eMac before?
Have you tried inserting the disk multiple times and it keeps getting ejected?
Sometimes, when drives are going bad or are dirty, they will take multiple times to actually recognize the disk.
Also, how much free disk space do you have on your HD? You can find this by doing a Get Info from the File menu once you have selected the HD once by clicking on it.
littleshoulders
Message was edited by: littleshoulders

Blank dvds eject and no icon after installing mavericks

I have a late 2008 (aluminum) 13 inch Macbook and recently installed the new OSX Mavericks. I wanted to put some pics onto a dvd. Inserting a new blank DVD (tried more than one DVD), the internal drive sounds like it is trying to play/open the DVD ( no icon shows on desktop) ,then a window pops up asking for password. After putting in password, hit ENTER. The DVD ejects immediately. Looked into -System Preference - CD/DVD check settings nothing corrects problem. When I put a pre-recorded DVD (movie) Icon comes up and it will play the movie.
Does anyone have any suggestions\
Thanks DJ

Hi,
Insert a blank CD and boot up your Mac. When it boots to the Desktop, drag that CD icon to the Trash, empty the Trash and restart your Mac.
Caroyn
Message was edited by: Carolyn Samit

Blank DVD +R eject from drive

Alright, I've been burning things with these same dvd's for the past couple days without a single problem, but all of the sudden today, my drive keeps ejecting the blank dvd's. It still works fine with movie dvd's, cds, and even the same dvd+r's that have data on them. What happens is, I put a blank dvd in, it sounds like it's trying, then makes a noise like a rock is in there skipping around, then it tries again and ejects. I have a macbook pro bought december 2009 brand new. Any help would be great, thank you.

If there was something that just needed to be cleaned, I don't think that the other types of discs would be working. Everything gets read just fine except for blank dvd's...

I inserted a blank dvd and now I can't get it to eject

I inserted a blank DVD +R; I can't get it to eject using the keyboard. The finder window does not show the DVD.

Reboot holding the mouse button down, which should cause the DVD to eject.

Drive keeps ejecting Blank DVDs but will read DVD with media in it

I am at loss what to do. Whenever I put in DVD with media in it (including +R), it plays and reads it all just fine. CD data reads no problem too. However, when I put in a Blank DVD, it chugs and ejects it out completely.
Preferences are fine. It says 'Ask What to Do' is set when 'You insert a Blank DVD'
Here was how it started. Previously, I could put in a blank DVD and it would be just fine but I'm having problems burning after the 10.5.6 update. Read in a post somewhere to try resetting your PRAM which I did and now it won't accept the blank DVDs. Everything else is fine.
Would really appreciate ANY help I can get!
Hardware Overview:
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version: 1.14f5
Serial Number: W86470M9X6C
Sudden Motion Sensor:
State: Enabled
MATSHITA DVD-R UJ-85J:
Firmware Revision: FAV1
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds

Everything in your post indicates you're having the problem with a MacBook Pro. If that's the case, we need to get your post moved to the appropriate forum--it's currently in the iBook G4 forum.
If you're having troubles on the MacBook pro, I'll report your post so the hosts can move it for you.
~Lyssa

IMAC SUPERDRIVE EJECTS Blank DVDs

My Imac Superdrive ejects all blank dvd but can read all movie dvd. Is there anyway to fix it ?

Hi i have the iMac mid 2007, and my superdrive have always been noicy. So i bought an external DVD bruner (samsung) works great, so the interna would not break down. Despite my prudence my internal superdrive are broken now. kjhfhf
Can´t read, can´t write, can´t do nothing.
Several users has hade problems with these drivers, maybe Apple would extend warrent on thise lousy gizmo´s.
Or make the superdrive like a cassette, so just a push on the side of the iMac makes the superdrive "pop out". So you dont have to demolishe the whole computer just to replace it.
Somtime i wish i worked at Apple so i colud show how a knife-grinder sholud be pulled.

How do I eject a blank DVD-R?

I inserted a blank DVD-R intending to produce a DVD using iDVD. My iMac made a lot of noise moving the disk around after I inserted it, way more than normal. I tried to make a DVD, but iDVD said to insert a blank disc and there is one in the computer already. There is no icon for the blank DVD in my desktop, so how do I eject it?
Thanks for your help.

The problem is finally solved. I was using the last blank DVD from the spindle. The manufacturer had attached a piece of cardboard to the back of the blank DVD. I didn't notice it before I put it in my iMac. When I took my iMAC to the Apple store they eventually figured it out and got the blank DVD out. Why the manufacturers feel the need to attach paper to blank DVDs is something hard to understand.
I'm going to look carefully at each blank DVD before I put it in the computer from now on.

I inserted what I thought was blank DVD-R/W to verify. It won't eject.

I inserted what I thought was a blank DVD-R/W to verify. It won't eject.
I have an appointment for tomorrow in the evening to remove DVD-R/W disc at the Grove in L.A.
Phone support declined to assist without $19.00 charge.

Restart the computer and hold the trackpad until the dvd is ejected.
Best.

Blank DVD+R won't mount, always ejects

After installing Leopard, any blank DVD+R that I insert won't mount, it makes noises and always ejects -
yet
1. I can read the Mac OSX Leopard DVD and have installed it.
2. Blank CDs mount and can be burned. And they play as well.
This appears to be happening only after installing Leopard. Help, anyone!!

The specs for this drive are hard to find, but this came up with some Google searching:
MATSHITA DVD-R UJ-835E:
Firmware Revision: GAN7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
This would indicate that this drive does not support double-layer (DL) DVDs. You can confirm this by checking the specs for yours in System Profiler.
bd

Blank DVD-R being ejected

When I insert a blank DVD-R it is ejected. No icon appears on my desktop
System Pref is set to iPhoto, how do I change this to "Open Finder"?

The drive accepts discs but they do not mount or are automatically ejected
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Reset the Power Manager (PMU) or System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. For example a "combo drive" can read a DVD-R and burn a CD-R however it cannot burn a DVD-R. The utility System Profiler may provide additional information regarding what media your computer supports.
If the discs continue to not be recognized, please contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.

The blank dvd r keeps getting ejected ...

I am trying to burn an imovie to a blank dvd+r. Wnen I click on "burn dvd." ..the computer ejects the disk. This a new set of dvd+r I bought at Staples , specs are 16x. Any thoughts??? Do I need special formated disks to burn an imovie??

At First, I try to do your first option,
Verbatim brand DVD-R is not working.
Next , you said,
"Verbatim should have worked. Typically Apple branded discs are just repackaged Verbatims. One thing to note about that machine, a firmware update supported higher speed burn support DVDs:
http://docs.info.apple.com/article.html?artnum=86130"
-------- Pop up window said, "This update is not compatible with this model Macintosh"
so, Let ms check this DVD Devices & volumes , it is ,
CD-RW/DVD-R
Disc Burning Fully supported.
Unit Number 0
ATA Device Type atapi
Device Serial EA998D08
Device Revision A43h
Product Identification DVD RW DW-U10A
Vendor Identification SONY
The result is ... Mine is Sony brand.
If that doesn't work, and your clock battery has been replaced in the last four years, zap your PRAM:
Finally, if none of the above works, you may want to get an external Firewire burner from http://www.macsales.com/
They have the full range of support from iDVD to other Apple applications, as well as booting.
your last option is the last of my choices.
Is that all?
I have used power mac 6100-66 since 1994 that is still working in my studio, I love MAC, In My Studio, I have two Macs, One is Power Mac 6100-66av and iMAC G4 17" flat Dome.
I have No Idea why my DVD -R Burning Broblem with others brnad blank DVD-R except Apple brand. and you company said, "Typically Apple branded discs are just repackaged Verbatims."
But My DVD Burning is still problem with that Verbatim brands DVD-R.
Really,if you take care of your future customer, Your company needs responsibility to even just, one customer's sound.
Now, I have no solution except to buy external Firewire burner with my money.
Now to Future, who can buy the MAC without the clear solution service in Apple Co.?

Ejecting a blank DVD

Good Morning,
For the first time, I'm trying to burn some pics to a DVD. I insert a blank DVD+R disk into the iMac's disk drive. My system doesn't seem to recognize the blank - it doesn't show up in Devices in Finder. Since it doesn't show there, I'm not able to use Finder to eject it.
Prior to inserting that blank, I had played another DVD video earlier with no problems and Finder showed that disk in Devices.
1. How do I eject that disk?
2. If Finder showed the DVD video disk in Devices earlier, why doesn't Finder see that blank disk?
I have an iMac 24 with Lion installed.
Thanks in advance! Vince.

Hi, I just had a similar problem, and found that Option+Eject would eject a blank dvdrom. (OSX 10.6.8 on friend's recent, big iMac.)
Apparently, if Finder does not recognize a filesystem on media, it does not display an icon for it in the Finder sidebar (and no eject button next to it).
To reproduce: insert blank dvdrom; in about 15s a dialog comes up, asking what to do; choose Ignore. Now try to eject. Eject button does nothing. Option+Eject does eject the media.

DVD drive ejects blank DVD R

Every time I load a blank DVD R into the built in drive it ejects. This has only happened recently. Any thoughts please

yes, there are countless blank media types, and there is NO DVD burner out there that will feed them all.
DID you switch to a new DVD blank media?
Also cheap DVD blank media has about a 10% reject ratio......try further down the stack
hard lessons learned after burning many 10s of 1000s of DVDs.
If it also ejects commercial DVD movies, you have a dirty laser diode lens.

Blank DVD ejects

Similar Messages

Maybe you are looking for