Blank error message Message no. M7001 while doing MIGO

Hi All
I am performing goods receipt using MIGO tcode, everythings seems to be ok.
even after clicking on Check button system is giving doc is OK.but when i click on post button a error message appears with no text, its blank. the message number is M7001. if any one of u have idea about this please let me know.
Regrds
Yogesh

Yogesh,
Hmm....I have seen this message before but I have no idea why the message text is blank. Message M7001 can be triggered in MIGO because of missing entries in various check tables and hence it it hard to pinpoint exactly what the issue is without knowing the message text.
For example, it could be due to incorrect copy of your company code or plant, or something to do with the movement type you are using in MIGO.
I would suggest you to check OSS notes for your SAP version/IS Solution or have an ABAPer debug the code to determine where exactly the error message is being triggered.
H Narayan

Similar Messages

  • "HKONT is empty" error message is getting while doing MIRO

    Hi Gurus
    While i am doing MIRO, i am getting the error message of "HKONT is empty". What is this error & how can i resolve and where can i check this G/L Account belongs to what?
    Thanks in adv,
    Regards
    BADRI

    Starting in release 4.6C, MM delivers complete tax information to
    the tax modules. But we are performing some consistency checks. Part of those checks is the test if HKONT is empty and
    T007B-STAZF has not been filled, otherwise we expect to get a correct
    account. There are no further issues in dealing with the flag.
    The error message may occur because of wrong customizing in the
    transactions FTXP and OBCN for non-deductible tax:
    1) FTXP: for the used tax code, please check / set with the button
    "accounts" the accounts.
    2) OBCN: please check for all the account keys of FTXP if some of
    them have the value 3 for the setting "Posting indicator". In that
    case, please check / set the flag 'not deductible' (= T007B-STAZF).
    Please refer to attached note
    377271 MR1M, MIRO: error FF804 'HKONT is blank'
    Please use transaction FS02 to set the tax relevancy on the control datatab for the G/L Account in question. Please see the solution in point
    2 of SAP Note 395919 for more detail.
    395919 MIRO, MR1M: Error messages when calculating tax
    Please also, review the standard system design as outlined
    in Note 39591. In the standard system design, must have the accounts
    set as relevant to tax.

  • Error message while doing MIGO.

    Hi,
    I am getting error message while doing MIGO. Can some one help me out in this issue.
    Consolidated companies 0 and 5686 are different
    Message no. F5 080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
    Thanks in Advance,
    Subhajo

    Check Fi customizing in OBA7.
    As you mentioned MIGO, I assume you are doing goods receipt, so you use document type WE.
    Within WE you must not have selected  the field inter-company posting .
    Best you place the cursor into this field and press F1 for detailed explanation,

  • Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

    Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
    Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
    Uninstalled Acrobat 9, reinstalled, still same problem.
    Help please!

    Yes I can it only happens in the browser..
    I reinstalled Windows on my machine and started over a couple of weeks ago.
    When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
    I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
    Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
    Ever since then I get the error when something is downloaded and opened in the browser.
    Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
    Not sure what to do..

  • Blank error message in R-CNR tree

    Hi All.
    We are getting a blank error message while viewing the visualization of R-CNR tee graph whereas we can see the summary without any issue. I have attached the screen shot for more clarification.
    Thanks,
    M.Sumesh

    Hi Sumesh,
    You are right that doesn't look right.
    A quick suggestion:
    Check the log file for more information, (if you need help to do this it is already discussed in this forum).
    Please also send a screenshot of the data and the R-CNR configuration (chosen fields). The algorithm summary what does that say?
    Best regards,
    Kurt

  • Blank error message when publishing to YouTube or to mp4 in Captivate 6

    I am trying to publish a captivate file to youtube and receive a blank error message box that just says Adobe Captivate with a big yellow exclamation point. I also tried publishing as media (mp4) and get the same error. Screen shot included below.
    The Top Issues article (http://helpx.adobe.com/captivate/release-note/top-issues-captivate-6.html) for Adobe Captivate 6 includes the following note:
    You may observe a blank dialog box or blank error prompts while publishing projects to YouTube. This issue occurs if the name of the Adobe Captivate installation folder contains unicode characters.
    I tried renaming the file and the application so it didn't include numbers or underscores and then realized that even letters are considered unicode - so obviously that didn't work.
    Does anyone have any suggestions?

    I'm having this same problem! I also tried to change the name of the application folder but this did not make a difference.
    Also tried changing the resolution size of the project as recommended by someone and this did not make any difference.
    I'm at a loss. Wish I could get my money back for this product!
    My resolution of the project is 1145 X 730.
    Any other suggestions?
    Thanks,
    Marlyn

  • Error message FI 759: Fund does not exist in FM area

    Hill!
    I have to make a distribution in CO-OM (tr KSV5) according to fund
    But if I customize fund as sender, choose fund from the fund catalog  and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

    Hi Irina,
    As per the note 489315, you must choose a layout that contains the exact data for the active objects.
    When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
    If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
    Once you add the field Fund and set it to optional you should be able to use planning.
    Note 555134:
    3.  The fields of the Funds Management are defined as 'Required entry
        fields' in the standard layouts, in other words depending on the
        permissibility of the initial value for a field an entry is always
        demanded. To prevent this there are two options:
        a) Copy the desired standard layout into an own (transaction KP65,
           KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
           set the corresponding field to 'Optional". Then, add this layout
           to your planner profile with transaction KP34.
        b) Implement the attached program ZK555134 (correction instruction
           461025). After the entry of planning area and layout all fields
           of the Funds Management are set depending on your selection of
           'Optional' or 'Not optional' (standard system). Like this you can
           also change standard layouts. The check for the fields for which
           'initial' is not a valid value is still carried out.
    If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
    If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
    If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required  entry field in CO, FI-AA and HR for all company codes in the client concern.
    Please also refer to notes 625262 and 659086.
    or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
    I believe this will resolve your issue.
    Best Regards,
    Vanessa.

  • Getting blank error messages for no apparent reason.

    Firefox randomly freezes and the top bar says "Firefox (Not Responding)". This lasts for a little bit, then a blank error message pops up. It has no text anywhere, and the only thing I can do is x out. When I do, Firefox returns to normal. However, this is happening with increasing frequency and lasting longer.
    It only happens with Firefox, all other programs work at the time, so it's a Firefox problem. It actually just happened again while typing this.

    Hi Neolithic,
    If you can fill out the contact us form in the "about me" section of my profile, we can look into this for you.
    Cheers,
    Chris
    BT Moderator Team
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • MARS "Blank Error Message"

    I was wondering if anyone had seen the words "Blank Error Message" while working from the CLI on MARS 4.2.6
    We first saw it while upgrading and later saw the same message while setting the Timezone.
    They don't appear to mean anything as we were able to do the upgrade and set the timezone. Is this a cosmetic bug?
    Thanks!

    CSCsc91430?A blank error message is displayed when you update your client software
    Description: During a service pack or point patch installation, a system prompt tells you to uninstall Security Manager Client. Unless you click the OK button, an error message that contains no text is displayed.

  • I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    JUst experienced the exact  same problem after changing password.Getting same message. Hope someone has an answer for this.

  • I keep getting a popup error message in Ical "server does not recognize name/password

    I keep getting a popup error message in Ical "server does not recognize name/password"  This started after they did the change to Icloud and extended our subcriptions. 
    Tricia

    I guess that the server name is incorrect, then.
    Did it ever work?
    Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password.

  • I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...."  How do I fix this?

    I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel."
    How do I fix this?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Windows 7 blank error message at logon

    Good day computer folks!
    I have had a problem for some time with my Asus G74sx, with Windows 7 Home.  After boot up, my logon time has gotten fairly long and I get a blank error message box titles only "error".  Process explorer groups it under csrss.exe and
    calls it only error by way of title, with no file path.
    I logged a boot and it says did not load driver: srv.sys, vga.sys, and it attempted to load NDProxy.sys 4 times.
    I am at a loss as to what's up with the comp... thanks in advance.

    Hi,
    In addition to startup repair, regarding slow boot/slow logon issue in Windows 7, please also take a look at the following related articles:
    1. Check if we have those Hotfixes installed:
    Windows 7 Slow Boot / Slow Logon (Why I do what I do)
    2. try the Windows Boot Performance Diagnostics:
    Troubleshoot Slow Start Ups with Windows Boot Performance Diagnostics
    3. Related blog:
    Slow Boot Slow Logon (SBSL), A Tool Called XPerf and Links You Need To Read
    Best regards
    Michael Shao
    TechNet Community Support

  • Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • Unable to install photoshop elements 13 on new computer.  Error message is:  This installer does not support installation on a 64-Bit windows operating system.  Please download the 64-Bit version of photoshop elements.  How do I do this?

    Unable to install photoshop elements 13 on new computer (Windows 8.1 OS).  Error message is:  This installer does not support installation on a 64-Bit windows operating system.  Please download the 64-Bit version of photoshop elements.  How do I do this?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Maybe you are looking for

  • Pdf files not opening in Adobe Reader

    As of 3weeks ago, all of my Pdf files are opening in Corel X3. How can I fix this?

  • How to fetch last record from the table to display in screen painter?

    Hi Gurus,               I have a requirement where i have to fetch the last record value in the table. I have a screen where the TEXT name is REQUEST and I/P field name is REQ and SAVE push button. In this I/P field automatically 1 should display whe

  • Motion and Imac for Short Videos (5 min or less)

    I am going to produce short videos for streaming on the web. They should not be over 5 min. I have decided to buy Final Cut Pro Suite and a new computer. Of course I want the best setup for the least amount of money. (for my needs). I have read other

  • How do I open Adobe files on OneNote?

    So, maybe I'm just a Windows 8 dud (Just got my laptop on Sunday...been using a Win7 for....6 years now?) Anyway... I'm trying to get it so I can use a pen on my notes (nifty bend back laptop with touch screen) but uhhh...can't figure out how to acti

  • Autostereoscopic in AE?

    Is it possible to make autostereoscopic video in AE and export it so it can be watched on 3DTV glasses-free? I'v menaged so far to make it stereoscopic with anaglyph tehnique, but my boss wants it to be glasses free? Can anyone help me?