Blank field getting converted into wrong date

Dear All,
I have one date field in SAP table in which there are some entries and some blank entries.
when Proxy is sending this data from ECC blank entries are converted into 00000000 and through XI in file
this
00000000 entry for date getting converted into wrong date like 30.11.0002 in file.
I have taken data type as string do I need to take data type as date.
My doubt is if there is no entry in table why it is convertng to 00000000 and after passing from XI why it is converting into
30.11.0002 .
Regards

Hi ,
My date format like this
source --yyyyMMDD
target-DD.MM.YYYY
so if
source is
00000000
should comes like this
target
00.00.0000
but it is converting into
30.11.0002
every where in file values for 00000000 is coming like 30.11.0002
Regards

Similar Messages

ALV QUANTITY field Geting converted into decimals ?

Hi All ,
I have developed an alv report .In that the quantity field is made editable after editing the quantity when i save it .It gets converted into decimals.Suppose if i give 77 its getting reflected as .077 all the field name ,table name ,reference field name, reference table name, quantity field data type has been passed but the problem persists.If there is any one whos has come across this kind of scenario please share your thoughts on this.
Best Regards,
Sreeram

Hi Sreeram,
I am not gettin this issue. See below code :
If you are gettiing the same issue with the below code then it has something to do with your user settings.
Go to Menu Item System -> User Profile -> Own Data -> Defaults ->Decimal Notation.
Set it to 1,234,567.89 and save. Now try the program again.
REPORT z_test.
TYPE-POOLS: slis.
TYPES : BEGIN OF ty_ekpo,
          ebeln TYPE ebeln,
          ebelp TYPE ebelp,
          ktmng TYPE ktmng,
          menge TYPE bstmg,
        END OF ty_ekpo.
DATA: it_ekpo TYPE TABLE OF ty_ekpo,
      it_fieldcat TYPE slis_t_fieldcat_alv.
SELECT ebeln ebelp ktmng menge
FROM ekpo
INTO TABLE it_ekpo
UP TO 20 ROWS.
PERFORM add_fieldcat USING 'EBELN'.
PERFORM add_fieldcat USING 'EBELP'.
PERFORM add_fieldcat USING 'KTMNG'.
PERFORM add_fieldcat USING 'MENGE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program                = sy-repid
   it_fieldcat                       = it_fieldcat
TABLES
    t_outtab                          = it_ekpo
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM add_fieldcat USING p_fieldname TYPE slis_fieldcat_alv-fieldname.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-ref_fieldname = p_fieldname.
wa_fieldcat-ref_tabname = 'EKPO'.
IF p_fieldname EQ 'KTMNG'.
    wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM.                    " ADD_FIELDCAT
Regards,
Jovito

Excise invoice not getting converted into INR from USD for an IMPORT PO

Hi All
I have posted one Import PO. Did MIRO for custom and CVD. MIRO doc was in USD which is getting converted into INR as per the exchange rate maintained in OB08.
Then I did MIGO with the ref of comm invoice of MIRO. Now MIGO doc is posted in INR as per exchange rate maintained in OB08 for custome duty and Freight and base value.
For Excise invoice , CVD is getting captured but in excise tab, base amount is showing in INR and currency also shows INR which is correct.
Total Basic duty (BED) , Cess and Hecess iamount s coming in USD but curency is showing INR. After posting the doc also it has not getting converted into INR and the same USD amounts got posted in Excise GLs and currency still showing INR.
For example:--
PO value shows
Base Price - 2040.20   USD
Custome   -     204.20    USD
CVD         -      179.54    USD
Cess on CVD      3.59    USD
H Cess on CVd 22.44 USD
Now in excise invoice in Excise item tab
Base value - 99960 INR (converted at teh rate of 49 , exch rate type M)
BED -   179.54 INR
CESS - 3.59 INR
HECESS 22.44 INR
Here only currency is changed to INR but amounts are still in USD. After posting the doc also same result is coming, hence Registers are getting updated with wrong values.
Can any one suggest what to do to correct this.
Regds
Mukta
Customization for CVD maintained in Excise config -- company code setting- exchange rate type for CVD is M.
OB08 maintained for USD to INR for the current date.

HI Tej
All the Import cycle has created three documents.
1. MIRO doc for custom duties and CVD .--   MIRO posted in USD . I can see the doc in both currency - INr and USD via accounting doc - display currency. I do not have any issue.
2. MIGO doc - for custom duty and Freight -   MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document- Display currency and even in the MIGO -- purchase order history tab.
3. Excise Invoice - for CVD - EX Invoice posted in diifferent way --
In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
Condition type JCV1 is also marked with currency conversion and accruals.
Is there any patch or note I need to apply to getting this converted , or any process issue.
Regds
Mukta

Mangal Fonts and Tunga Fonts in (MS Home and Student 2010) Word 2010 not getting converted into PDF

Why do I get a totally blank PDF file whenever I try to convert any (Microsoft Office Home and Student 2010, Version: 14.0.6029.1000) Word document file containing either Mangal Fonts (Hindi) and Tunga Fonts (Kannada) into a PDF file (by using Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790 MB, Complete/Full Version) after formatting and reinstalling all the necessary software / softwares (Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3 and Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB)?
I'm using
01) Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3
02) Computer: Intel(R) Pentium(R) 4 CPU 3.00 GHz 3.00 GHz, 504 MB of RAM
03) Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB
04) Microsoft Office Home and Student 2010, Version: 14.0.6029.1000, Product ID: 82503-388-0792296-26607, Program File Size: 490 MB
05) Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790.00 MB, Complete/Full/All Version/Features has/have been installed
06) Windows Internet Explorer 8, Version: 20090308.140743, Program File Size: 4.20 MB
Any Word 2010 document file that has been converted into any PDF File unfortunately does not show either the Mangal (Hindi) Fonts or the Tunga (Kannada) Fonts.
The PDF file will unfortunately become/remain totally/fully/completely blank.
When I convert an Excel Workbook having the Tunga Fonts (Kannada) to/into a PDF File, some of the Tunga fonts in the PDF file are legible and some are unfortunately illegible (get superimposed / overwritten on each other).
Perhaps I may get the same result if I try to convert an Excel Workbook having the Mangal Fonts (Hindi) to/into a PDF File with some Mangal fonts being/becoming legible and the rest being/becoming illegible (getting superimposed / overwritten on each other).
Tanveer
Syed Tanveeruddin, Karnataka, India
Message was edited by: tanveerindian
Message was edited by: tanveerindian
Message was edited by: tanveerindian

My chronological sequence of steps to create a Word 2010 Document or an Excel 2010 Workbook:
I first create a Word Document File or an Excel Workbook File and save it by giving an appropriate file name.
Then I right click on the closed Word Document File or the Excel Workbook File in the file folder and convert it into a PDF by retaining the same/original file name.
The font list of Microsoft Word 2010 claims/says/states that both Mangal and Tunga are True Type fonts and also that these fonts will/would be used on both printer and screen.
In case if there is any text content in English in the beginning it will get converted into PDF only till/until either a Mangal(Hindi)/Tunga(Kannada) Font starts.
The remaining English text content does not get converted into/to PDF the moment a Mangal(Hindi)/Tunga(Kannada) Font starts. If the entire matter is purely (100 per cent) in English text it will fully / completely / totally get converted into a PDF file without any problem.
Message was edited by: tanveerindian

Problem with special characters getting converted into '#' in portal

Hi All,
The special characters like " - ", " ' ", " ` ", are getting converted into '#' when the smartform is displayed in portal.
I have a smart form in which the text contains the above special characters and they are getting displayed as ' # ', when the form is invoked in portal. We are not able to trace the problem.
I need your input on this ASAP.
Thanks in Advance,
Sowmya

This could be caused by conversion routine on the field.
in sapscript, can use &FIELD-NAME(K)& to ignore conversion routine
To see this and other options, in text edit of script select menu option Insert>Symbols>New and then type field name and select desired check box options - field will be placed in script with relevant formatting characters
Andrew

HT4236 My pictures get shuffled into wrong events folders when syncing to iPad mini. Any suggestions?

My pictures get shuffled into wrong events when syncing to iPad mini. Any suggestions?

Photos are sorted by date modified when you sync from iTunes. If you have them arranged out of date sequence, they will not sync that way onto the iPad. You can read more here.
http://support.apple.com/kb/HT4221

Date time stamp to be converted into only date

Hi Experts,
when i am using substirng functoin for converting datetimestamp to date it is giving the following error
i am using RNIF pip to be converted into IDOC ORDERS 05
the time stamp value from pip should modified in that so that i can get only the date
by elemiting the time asscioated with it so i used substring functoin it is giving following error
/ORDERS05/IDOC/E1EDK02/DATUM. The message is: Exception:[java.lang.StringIndexOutOfBoundsException: String index out of range: 8] in class com.sap.aii.mappingtool.flib3.TextFunctions method substring[, com.sap.aii.mappingtool.tf3.rt.Context@107c499] com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ORDERS05/IDOC/E1EDK02/DATUM. The message is: Exception:[java.lang.StringIndexOutOfBoundsException: String index out of range: 8] in class com.sap.aii.mappingtool.flib3.TextFunctions method substring[, com.sap.aii.mappingtool.tf3.rt.Context@107c499] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:347) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.StringIndexOutOfBoundsException: String index out of range: 8] in class com.sap.aii.mappingtool.flib3.TextFunctions method substring[, com.sap.aii.mappingtool.tf3.rt.Context@107c499] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:291) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:291) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:309) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: 8 at java.lang.String.substring(String.java:1441) at com.sap.aii.mappingtool.flib3.TextFunctions.substring(TextFunctions.java:33) ... 26 more RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ORDERS05/IDOC/E1EDK02/DATUM. The message is: Exception:[java.lang.StringIndexOutOfBoundsException: String index out of range: 8] in class com.sap.aii.mappingtool.flib3.TextFunctions method substring[, com.sap.aii.mappingtool.tf3.rt.Context@107c499]
thanks
sunil

Hi,
Do as follows.
Use standard date transformation function.In that format of source date give as hh:mm:ss ddMMyyyy and format of targeet date as you wish..It wil solve.
Please award marks if found useful.
Thanks
Hamja

"GWCommanderClass can't get converted into GWCommanderClass"

I'm using a mix of C3PO & GW Token API. My language is C# and the Program is made for archiving into different archive storage systems.
Here my Error Message in German: 'Das Objekt des Typs "GroupWiseCommander.GWCommanderClass" kann nicht in Typ "GroupWiseCommander.GWCommanderClass" umgewandelt werden.'
Translated: 'The object of the type "GroupWiseCommander.GWCommanderClass" can't be converted into "GroupWiseCommander.GWCommanderClass".'
I got a C3PO which is using token API (GWCommander) to:
a) save the mail in mime format on the harddrive (ItemSaveMessage)
b) get the current logged in username (EnvUserID(1;0);)
My Program is first calling the ItemSaveMessage GW token from within the C3PO. Afterwards, it loads a archive dll which will do something with the eml file on the archive storage. The loaded dll is using another gwcommanderclass object to execute the EnvUserID token.
So, I got 1 commander object in my c3po dll and one commander object in a seperate dll which we replace, depending on the connected systems.
I heard, that it's recommended to free the gw commander object as soon as possible. So I set the gwcommander object to "null", directly after using it. But I still receive this weird error.
This behaviour is not 100% reproduceable.
One time it works fine with 10 tries and no error during the archiving process.
Sometimes I get this error after I archived the first item.
Thanks in advance for any kind of help/hint, regarding this issue.

Problem solved: I just moved the Commander Object code from the C3PO Dll into the second DLL.

Requirements for HTML to get converted into masterpage by Design Manager

Hi All, I am new SharePoint Developer. I am not designer, doesn't know much about CSS. I am getting HTML from outside. We have prepared the Wireframe in Visio as how the top and bottom should look like. My question is - Is there anything that I need to give
to the Designer who doesn't know SharePoint? Is there any guidelines to prepare the HTML? Should I need to give them SharePoint CSS Chart or something that I should give it to designer? or It would be just plan basic HTML and CSS and Design Manager would convert
itself?
Please advise.
Regards,
Khushi

Khushi
If your designer has not used SharePoint before then the only thing you need to tell him/her is to take care of the html/xml validation. HTML should be W3C compliant. He can use any online tool to validate his HTML. There is a tool available on W3C.org (??)
as well. All tags should have ending tags. Once you have the validated HTML, SharePoint will take care of the rest. Design manager will convert your default html file into a master page. Remaining html pages will have to be converted into SharePoint pages
manually (Create pages in the Pages library). Ask your designer to layout the site using three sections: Header, Content and Footer. It will make your life much easier if you had these three sections in the master page. Then all you will need to do is
add content in the Content area of each of the remaining site page.
Btw, I have written a complete chapter on this topic in my new book on SharePoint (See my signature below for link). It is available in Kindle edition also if you want to get an immediate access to it.
Saifullah Shafiq
Blog:
Twitter:   LinkedIn:
  Facebook:
  Google+:
  Latest Book:
A Practical Guide to SharePoint 2013

String field value convert into Date with validation

Dear all,
I need some help if someone can please?
Actually I am getting date in string format as 20110315 or 20111025 or so on. I could use to date function for this for conversion but what if 20091432 which is wrong so I can hadle this.
Actually I m using oracle 10g and using anonymous pl SQL block . Can't write function or procedure for this. So I am extracting all the data including date as above and setting some flag so if date is correct then y otherwise no. Pls help. I think I have described everything what exactly I want?
If date is correct then insert in the different table otherwise setting flag if date is not correct. I.e. bdate varchar2
Best regards,
Edited by: Irha10 on 26-Jul-2012 12:29

Why wouldn't you be able to use a function or procedure in your anonymous block?
SQL> declare
2 --
3   function is_valid_date
4    ( p_str in varchar2
5    , p_format in varchar2 default 'yyyymmdd'
6    )
7    return varchar2
8    as
9      dt date;
10    begin
11      dt := to_date(p_str, p_format);
12      return 'Valid';
13    exception
14      when others
15      then
16        return 'Invalid';
17    end;
18 --
19 begin
20    for rec in ( select 20110315 str from dual union
21                 select 20111025 from dual union
22                 select 20091432 from dual
23               )
24
25    loop
26      dbms_output.put_line(rec.str||' '||is_valid_date(rec.str));
27    end loop;
28 end;
29 /
20091432 Invalid
20110315 Valid
20111025 Valid
PL/SQL procedure successfully completed.Just a small example, instead of dbms_output, you could do an update of a 'Valid' column etc. etc...

In the USOBT table Field 'Low' is fetching wrong data

Hi All,
I am generating a report for the basis, in that am fetching data from USOBT table there is a field 'Low' . Its not fetchng correct data for the field values like WERKS, VTWEG etc. actaully the values r populating like $WERKS,$VKORG ..... in the database table also the same values r appearing . i Have checked even f1 help in the transaction there it is coming with values .in the F1 help its showing only dataelment WERKS_D.
PLease tell me how can i retreive its actaul Value .Is there any other table i need to search????
Thanks & Regards,
rajesh S.

Problem Resolved by using the table USR12.
Its capturing the org values.
Thanks & regards,
rajesh S.

Exchange rate fields get failed when uploading data

Hi,
I have a problem when uploading purchasing data (2LIS_02_SCL) from R/3 to BW. Basically the exchange rate value is right in the PSA but NOT in the cube.
I just wondering what did they do when transfering the exchange rate data from PSA to cube. I have already checked the transfer rules and update rules, but no logic in there. So the logic should be ONLY pass the value, but somehow different value coming up.
Maybe you can have different think about this ?
FYI, I have already transfered global settings and exchange rates from R/3 to the BW. Is there any settings that I missed ?
Very appreciate of your help.
Thanks a lot
Martin Darmawi

Hi Roberto,
Thanks for your answer.
I think it has aggregation behaviour.
Do you know how I can avoid aggregation behaviour for a keyfigure ? Because I can't edit aggregation field and I tried to change the exception aggregation field with First Value, No Aggregation and Avarage value but it does not work.
Please let me know what you think.
Thanks and Appreciate for your help,
-Martin Darmawi-

How to avoid links/paths get converted into tokens in teststand report

Hi,
I was trying to get The hyperlink for some of The files in The teststand(4.0) report for a particular custom step made in labview 8.5. I was able to get The link correctly when The path specified does not contain any tokens(\N, \T,\R,\n,\t,\r,etc).
For example if my Folder name is "New" inside which my file is present(C:\NEW\test.txt). The teststand automatically converts "\N" and "\t" in The path to tokens.
I am not able to resolve this.
Can anyone help me in this regard.
Thanks,
Praveen
Solved!
Go to Solution.

I got the soultion for my query, working on it for an hour.
Solution:
If the path for the text file which was linked in report was :C:\Testing\New Folder\REPORT\test.txt
and if the report file is parallel to the test.txt file: C:\Testing\New Folder\REPORT\test.xml.
then for the link for absolute path in report :  C:/Testing/New Folder/REPORT/test.txt
               link for the relative path in report : "test.txt"
If the path for the text file which was linked in report was :C:\Testing\New Folder\REPORT\files\test.txt
and if the report file is parallel to the test.txt file: C:\Testing\New Folder\REPORT\test.xml.
then for the link for absolute path in report :  C:/Testing/New Folder/REPORT/files/test.txt
               link for the relative path in report : "../test.txt"
This is working for me, hope this works in every case.
Praveen.

Convert into xs:date

Hi
I want to send date to webservice (ED) in XI.How can i convert my string to xs:date before mapping?
Thanks,
Archana

In some case you can use an Adapter Module, but if I understood your direction
do not allow this:
From the official help.sap.com:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
<i>SOAP Adapter
In the sender adapter, you cannot add your own modules.
In the receiver adapter, if you want to add your own modules to process the request message, you add them before the module specified below; if you want to add your own modules to process the response message, you add them after the following module:
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean</i>
Regards,
Sandro

MRP Generated PR should not be converted into PO before release date.

Gurus,
In MRP generated PR system defines a release date for the PR(date by which the PR should get converted into PO).My requirement is system sholud not allow me to convert that PR into PO before that Release date.
MRP generated PR are not subjected to Release strategy.
Is their any Configuration,User Exit for it.
SN

Hello Sanjay,
please try setting up an error from OMCQ t-code.
If this not helps then please contact your abaper, I m sure he will find out a way out of this.
Hope this helps..
Robin

Blank field getting converted into wrong date

Similar Messages

Maybe you are looking for