Blank Form Printing at the beginning of Print job

I'm using Adobe Output Designer 5.5 and have made some changes to an existing form, recompiled the form, and performed a test presentment. The problem is that I have a blank page that prints at the beginning of the print job. How can I get rid of the blank page? The problem did not begin until I made changes to the existing form. Do you have any idea why the blank page is suddenly printing? I didn't change any system settings.

Hi,
I currently have the same problem. I updated an existing template with an JFMain page, and AOD just puts the page in front of the original page. I will post a piece of the log here, maybe you can see what the problem is?
[423]Data:^comment * Preamble overrides...
[423]Data:^field SubscriberName
[289]MDF file `C:\DOCUME~1\APB7D8~1.ARN\LOCALS~1\Temp\MDF123.tmp' opened.
[201]Event group:JFDEFGROUP!OnTOF looking for event macro.
[204]Event group:JFDEFGROUP!OnTOF not found.
[108]Field 'SubscriberName' not found on subform/page 'JFMain'.
[423]Data:Alex Inc.
[201]Event group:JFDEFGROUP!OnTOF looking for event macro.
[204]Event group:JFDEFGROUP!OnTOF not found.
[201]Event SubscriberName!Format looking for event macro.
[201]Event group:SubscriberName!OnEntry looking for event macro.
[204]Event group:SubscriberName!OnEntry not found.
[201]Event group:JFENDDATA!EndData looking for event macro.
[201]Event group:JFDEFGROUP!onExit looking for event macro.
[204]Event group:JFDEFGROUP!onExit not found.
[290]Laying down globals for subform/page '2'.
[208]2 surfaces were printed.
523]Processing PDF input data file: 'C:\DOCUME~1\APB7D8~1.ARN\LOCALS~1\Temp\JFM13A.tmp'.
[521]Progress Report: 'Starting a new form (mdf138).'.
[522]Progress Report: 'Processing Page 1'.
[522]Progress Report: 'Processing Page 2'.
[524]Completed.
I only posted the rows that seem to be different from the regular data and event rows
Thanks!

Similar Messages

  • Friends need help desperate-- Second page not printing from the beginning

    Hi Friends,
    I have a large layout whose main-section is 8.5x20 (Width&height) which has 2 frames each having 2 repeating frames and about 20 fields in each repeating frame. When I run the report it shows the report right, but when I print, it prints only the first half since the report is long. When I change the property of the second frame of 'Page break before' to 'yes' it prints the second frame on the second page but print it at the same position as it printed on the first, and top of second page is all blank. How do I make to print from the beginning of the second page. Need your help.
    Thanks
    Joe.

    Hello,
    Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
    Regards

  • In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards.

    In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!

    You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
    If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
    https://www.macupdate.com/app/mac/15485/labels-&-addresses
    I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
    Regards.

  • I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    There may be some security issues related to the USPS PDFs.
    http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
    I can't help with the scan/print problem. You seem to have done everything I would try.
    I don't know if maybe using a registry cleaner would help.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • My story file stuck a blank page 1 at the beginning.

    How do I get rid of a blank page 1 at the beginning of my story file? It won't let me get rid of it.

    I'm having the same problem, only it's the page immediately after the title page.  Everything had been working beautifully with Adobe Story but coincidentally, when I got on Adobe Story this morning, it asked to update.  Is this just a coincidence? 
    Also, this glitch is several years old, per previous forums.  Was it ever fixed???
    I tried both copy and cutting and pasting to that second page to work around it.  Instead, it added some of the beginning of the script to the title page and did not paste the rest of the script, however, it did paste this same peice on the second page.  I couldn't edit this either, nor delete it.  I could only undo to get back to the original problem.

  • Hi my Canon ix6550 has started to stop printing in the middle of a job, what can I do?

    Hi my Canon ix6550 has started to stop printing in the middle of a job, what can I do? If I turn off the printer and turn it on again it will print but then it will do it again. Help please.

    I have tried re-installing the software and have unplugged and replugged the USB cable but to no avail. It keeps stopping after printing a couple pages. Is there no one from Cannon who can help me??

  • Problem with the garbage record getting printed at the beginning

    Hello Friends,
    I know that this problem is very difficult to solve without looking at my script and its program. But I will try asking anyways.
    I have written the following code (Driver program) which uses to tables ZRAMCUSTMAST AND ZRAMCALLMAST.
    ZRAMCUSTMAST has customer details like address etc.,
    ZRAMCALLMAST has the call details that each
                 customer has done.
    But when I print the details, it prints everything correctly but for each customer it prints some garbage
    values as the first row.
    Any feedback will be greatly appreciated. You can mail me the response also (singer_ram AT yahoo DOT com)
    CODE in my driver program (SE38) -
    *& Report  ZRAMPROJSCRIPT                                              *
    REPORT  zramprojscript                          .
    TABLES : zramcustmast, zramjuncmast, zramcallmast.
    DATA : itabcustmast LIKE zramcustmast OCCURS 1 WITH HEADER LINE,
           itabjuncmast LIKE zramjuncmast OCCURS 1 WITH HEADER LINE,
           itabcallmast LIKE zramcallmast OCCURS 1 WITH HEADER LINE.
    DATA: type_of_call(1),
          CALL_CHARGE type i, CALL_CHARGE_STRING(5), TOTAL_CHARGE type i,
          hour(2), min(2), sec(2).
    SELECT * FROM zramcustmast INTO TABLE itabcustmast.
    *SELECT * FROM zramjuncmast INTO TABLE itabjuncmast.
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      APPLICATION                       = 'TX'
      ARCHIVE_INDEX                     =
      ARCHIVE_PARAMS                    =
      DEVICE                            = 'PRINTER'
      dialog                            = 'X'
       form                              = 'ZRAMPROJSCRIPT'
       language                          = sy-langu
      OPTIONS                           =
      MAIL_SENDER                       =
      MAIL_RECIPIENT                    =
      MAIL_APPL_OBJECT                  =
      RAW_DATA_INTERFACE                = '*'
    IMPORTING
      LANGUAGE                          =
      NEW_ARCHIVE_PARAMS                =
      RESULT                            =
    EXCEPTIONS
      CANCELED                          = 1
      DEVICE                            = 2
      FORM                              = 3
      OPTIONS                           = 4
      UNCLOSED                          = 5
      MAIL_OPTIONS                      = 6
      ARCHIVE_ERROR                     = 7
      INVALID_FAX_NUMBER                = 8
      MORE_PARAMS_NEEDED_IN_BATCH       = 9
      SPOOL_ERROR                       = 10
      CODEPAGE                          = 11
      OTHERS                            = 12
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    LOOP AT itabcustmast.
      CALL FUNCTION 'START_FORM'
       EXPORTING
      ARCHIVE_INDEX          =
         form                   = 'ZRAMPROJSCRIPT'
         language               = sy-langu
      STARTPAGE              = ' '
      PROGRAM                = ' '
      MAIL_APPL_OBJECT       =
    IMPORTING
      LANGUAGE               =
    EXCEPTIONS
      FORM                   = 1
      FORMAT                 = 2
      UNENDED                = 3
      UNOPENED               = 4
      UNUSED                 = 5
      SPOOL_ERROR            = 6
      CODEPAGE               = 7
      OTHERS                 = 8
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'WRITE_FORM'
       EXPORTING
         element                        = 'MAINPAGE'
         function                       = 'SET'
         type                           = 'BODY'
         window                         = 'MAIN'
    IMPORTING
      PENDING_LINES                  =
    EXCEPTIONS
      ELEMENT                        = 1
      FUNCTION                       = 2
      TYPE                           = 3
      UNOPENED                       = 4
      UNSTARTED                      = 5
      WINDOW                         = 6
      BAD_PAGEFORMAT_FOR_PRINT       = 7
      SPOOL_ERROR                    = 8
      CODEPAGE                       = 9
      OTHERS                         = 10
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      clear itabcallmast.
      refresh itabcallmast.
      SELECT * FROM zramcallmast INTO TABLE itabcallmast WHERE customerid = itabcustmast-customerid.
      SORT itabcallmast by calltype.
      TOTAL_CHARGE = 0.
      LOOP AT itabcallmast.
    Local Call : 1 Rupee per Minute.
    STD : 1.5 Rupees Per Minute
    International calls : 5 Rupees Per minute
    hour = itabcallmast-CALLDURATION+0(2).
    min = itabcallmast-CALLDURATION+2(2).
    sec = itabcallmast-CALLDURATION+4(2).
    CASE itabcallmast-calltype.
    WHEN 'L'.
        CALL_CHARGE = ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) / 60.
    WHEN 'S'.
        CALL_CHARGE = ( ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) * 2 ) / 60  .
    WHEN 'I'.
        CALL_CHARGE = ( ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) * 5 ) / 60   .
    ENDCASE.
    CALL_CHARGE_STRING = CALL_CHARGE.
    TOTAL_CHARGE = TOTAL_CHARGE + CALL_CHARGE.
        CALL FUNCTION 'WRITE_FORM'
         EXPORTING
           element                        = 'MAINPAGE'
           function                       = 'SET'
           type                           = 'BODY'
           window                         = 'MAIN'
    IMPORTING
      PENDING_LINES                  =
    EXCEPTIONS
      ELEMENT                        = 1
      FUNCTION                       = 2
      TYPE                           = 3
      UNOPENED                       = 4
      UNSTARTED                      = 5
      WINDOW                         = 6
      BAD_PAGEFORMAT_FOR_PRINT       = 7
      SPOOL_ERROR                    = 8
      CODEPAGE                       = 9
      OTHERS                         = 10
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDLOOP.   " ************ itabCALLmast
      CALL FUNCTION 'END_FORM'
    IMPORTING
      RESULT                         =
    EXCEPTIONS
      UNOPENED                       = 1
      BAD_PAGEFORMAT_FOR_PRINT       = 2
      SPOOL_ERROR                    = 3
      CODEPAGE                       = 4
      OTHERS                         = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    clear itabcallmast.
    ENDLOOP.   " ************** itabCUSTmast
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT                         =
      RDI_RESULT                     =
    TABLES
      OTFDATA                        =
    EXCEPTIONS
      UNOPENED                       = 1
      BAD_PAGEFORMAT_FOR_PRINT       = 2
      SEND_ERROR                     = 3
      SPOOL_ERROR                    = 4
      CODEPAGE                       = 5
      OTHERS                         = 6
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

    hi
    good
    check the following things-
    1- Check the value for the field in the particular table,
    2- Check the data you r passing from the driver program and the field that is printing the value in the sapscript screen.
    3-check in the debug mode when the value is printing in the first row.
    thanks
    mrutyu

  • Outlook 2010 only pick up the default printer, ignore the manually selected printer.

    when I want to print paper through word or excel, I select printer-A, I got the paper from printer-A, which is fine. but in Outlook 2010, I did the same selection of Printer-A, and the outlook show the printer-A had been selected, but the paper was came
    out from printer-B, which is default printer in the windows 7...
    is anyone having this problem?

    Hi,
    I've seen some add-ins caused this issue, please start Outlook in Safe Mode to print:
    Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
    If then there's no problem selecting the printer to print, disable the suspicious add-ins to verify which caused the problem.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Hp officejet pro 8600 plus stops printing in the middle of printing

    I have the HP Officejet Pro 8600 Plus, it is setup wireless. It will print fine sometimes then it will print half of a page then pause or stop ???? I am using my IMAC computer. Has anyone had this problem, I am wasting too many sheets of paper.

    yes, I have the same problem... and as I print many Invoices at a time, it really slows things down.  It is wireless as well. It never did this at the beginning. It's only a month old.... where's the fix please HP!!!!????

  • How do I get Firefox to recognize my new default printer as the old default printer is no longer connected?

    I have installed a new default printer in my computer which is running Windows XP Pro. When I try to print from the browser it keeps showing the old printer which is no longer connected to the computer. Every other program has recognized the new default printer. The Control Panel indicates that the new printer is the default.

    You can force Firefox into forgetting the old printer.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''print.print_printer''', right-click on it and choose '''Reset'''
    # Restart Firefox

  • Avoiding the 'Save PDF File As' dialog when printing to the adobe PDF printer from a service

    Hello, can someone please help.
    I have Adobe Acrobat 8 Pro installed.
    I have an in house application which (among many other things) effectively monitors a directory and prints the file to the default printer. It works fine when run as an application.
    I have set the defaults on the Adobe PDF printer to put the output PDF file into a directory and not to open it so it works silently without prompts.
    When I run my application as a service, it brings up the 'Save PDF File As' dialog and I would like to avoid this. My impression is that if I put the right registry key in then it will work.
    I do not want to do any scripting if I can avoid it.
    Thanks for all constructive help given.

    Thank for your help Bill, but changing settings in the distiller did not seem to work. As my application prints directly to the default application without using anything specific to Acrobat, I was hoping there was a simple way forward. A colleague suggested copying registry entries from the account I logged on as to the S-1-5-18 entry, then rebooting. This had no effect as the prompt still comes up.
    Aandi, I don't have the Acrobat SDK or any experience of it.
    Also I'm not sure where any code/script would sit since the application is stable and so I would rather not change it.
    If it amounts to a few lines of javascript sitting outside the application then that would be of interest.

  • This is a problem. The new layout for apple mail in iCloud shows the body of a mail or any attachments on the right half of the screen. But it won't print just the attachment, it prints the whole email page, cutting off the bottom of the attachment.

    Even if I try to 'screen shot' just the attachment, the view won't move down as I enlarge the 'screen shot' to get all of the attachment. Previously, I could "SAVE" the attachment and only the attachment would be saved. Now the whole email page including the address info from the top is saved, so when I try to print what should be an 8.5x11 attachment the bottom of it won't print because the top 2" include the email address info.
    Suggestions?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Problem with printing over the shared network printer

    I have a very irritating problem.
    To describe the situation. I have 2 computers and non of them is mine. First one have Windows Vista, and second one have Windows 8.1. There is also a printer which is connected with usb to the computer with Windows 8.1. I managed to share that printer on
    the network, and when I connect to that printer and enter username and password (from Windows 8.1) on the pc that have Windows Vista, I can print without any problem.
    The problem start when I restart the computer with Windows Vista. I can't print unless I connect to that printer again and again enter the username and password. Like Windows Vista for some reason is not storing those credentials. It is very irritating to
    do that all the time, becase everything worked before like a charm.
    Is there something I didn't do about those credentials, or is there some batch script that I could run in startup that will connect Windows Vista PC with that printer without any user input?
    Thank you.
    Development Technician, Microsoft Certified Professional

    Hi,
    When you restart the Vista, have you checked the credential in credential manager (Control Panel\Credential Manager)? Does it exist? You can clear cached unused credential and manually add the printer Windows Credential in the manager and check if it
    helps.
    You can also use a logon script to add the printer automatically every time you logon to the PC, you can refer to thsi example, some content need to be changed depends on your configuration.
    http://gallery.technet.microsoft.com/scriptcenter/10ab836d-4d38-45a5-8d27-ba9af1717930
    http://blogs.technet.com/b/heyscriptingguy/archive/2006/12/12/how-can-i-add-a-network-printer-at-logon-and-optionally-make-that-the-default-printer.aspx
    http://technet.microsoft.com/en-us/library/cc770908.aspx
    Yolanda Zhu
    TechNet Community Support

  • Now I can't print to the Adobe PDF printer

    At the same time I started having problems updating Acrobat (see my post yesterday, please), my Adobe PDF printer disappeared from system preferences. I've added it back using the help>repair option, but the printer no longer works.
    Every time I try to print, the printer pauses, then when I restart it and try to resume the document I get an error...
    Operation could not be completed
    Client-error-not-possible
    I've done a complete uninstall/reinstall of the whole Design Standard CS3 suite 3 times now, including removing my prefs and serial number (so starting from scratch), but this error, and the Acrobat updating problem, won't go away.
    Please can someone help me on these?
    Thanks, Nige

    Try going to Printer Utility and deleting any reference to the adobe Pdf Printer Driver.
    Then you find file anlocate all versions of PDF Printer. remove all traces of version Previous to this version.
    Now open Acrobat and got to help menu repair and replace and have it repair the Printer Driver again.
    Note: PDF Printer does not work within Acrobat nor Reader. only with other applications. (Or at least I've never been able to have it work within Acrobat/Reader.)

  • Why can't I print to the desktop PDF printer from a PDF file?

    I don't know how much more info I can provide.
    Sometimes I want to print one page of a multi-page .PDF document (to the desktop pdf printer) and it looks like it goes, but never appears on the create adobe website.

    The CreatePDF Desktop Printer has been retired. Please see https://forums.adobe.com/docs/DOC-5131 for more information.

Maybe you are looking for