Blank HTML messages in Webaccess

ok I see a few posts about this, and not a lot of answer, but I don't see anyone mentioning what I have found.
Same as others, my users go into webaccess and they can view text e-mails just fine, but HTML formatted messages appear blank. From the desktop client everything works fine, but no in the web client.
Here's what I haven't found mentioned here. I have my agents installed on OES2 (not SP1) and I am using GW 703, and have been since this server was installed, but my / (root) is out of disk space.
I can clean up some log files give the GWDVA a few minutes or a restart and it works until some log files build back up and cause the server to run out of space again. This, unlike on a NetWare or Windows box does not appear to affect the OS. (got to love Linux) but it does affect the GWDVA. If I issue a rcgrpwise status command in an SSH session I get unused next to GWDVA.
So I have moved all of the groupwise logs (POA, MTA, GWIA, WEBACC) to the NSS volume attached to the server that has ample room. It helped a little, but this still rears its ugly head every few days.
What part of GWDVA is dependent on there being free space on / and can I force it to use the NSS volume as well.
One more note for the guy who wrote the EVMS documentation posted at novell.com/documentation, go over your notes again, and please try to write in the future with we newbies in mind. Perhaps a footnote that says, just because you know partitioning in NetWare and Windows, does not mean you understand it for Linux. (sorry had to get that off my chest)
Any help here wold be very appreciated. Thanks everyone.

jtreadwell,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Blank html popups in a mobile webdynpro application

In a web dynpro application, each time we move from one view to
another, or from DC to another a blank html page in being opened
(besides the target one)
the url of the blank page is : \tcwddispwda\global\SSR\html\blank.html
<b>this is happening when we open the application in a PDA mobile device
(with Win CE 5.00 inside)
and it does not happen in a regular pc.</b>
any adeas ?
thanks
Morad Zeidan

Open an OSS message.
Armin

Blank error message when publishing to YouTube or to mp4 in Captivate 6

I am trying to publish a captivate file to youtube and receive a blank error message box that just says Adobe Captivate with a big yellow exclamation point. I also tried publishing as media (mp4) and get the same error. Screen shot included below.
The Top Issues article (http://helpx.adobe.com/captivate/release-note/top-issues-captivate-6.html) for Adobe Captivate 6 includes the following note:
You may observe a blank dialog box or blank error prompts while publishing projects to YouTube. This issue occurs if the name of the Adobe Captivate installation folder contains unicode characters.
I tried renaming the file and the application so it didn't include numbers or underscores and then realized that even letters are considered unicode - so obviously that didn't work.
Does anyone have any suggestions?

I'm having this same problem! I also tried to change the name of the application folder but this did not make a difference.
Also tried changing the resolution size of the project as recommended by someone and this did not make any difference.
I'm at a loss. Wish I could get my money back for this product!
My resolution of the project is 1145 X 730.
Any other suggestions?
Thanks,
Marlyn

In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

Nurit,
The point is that that button should not be there, if the preference setting is as you say. This indicates the preference setting is stuck, and that is what I was trying to help you resolve.
The full purge is done as follows:
Quit Mail, and in the Finder open Home/Library and locate the Mail folder. Control-click over the Mail folder, and choose Duplicate -- then drag the resulting copy to the Desktop for temporary backup. Next, open Home/Library/Preferences and find the com.apple.mail.plist file and drag it to the desktop.
Relaunch Mail, which will open as though new, and when prompted to import anything DECLINE. Instead, re-enter your account info, and Mail will re-discover the account folders for your accounts, and all should be well, after setting preferences as you desire.
Ask any needed questions, and keep us posted.
Ernie

HTML messages crash Mail

Since this morning, every time I try to open an HTML message in Mail, it crashes. I don't have a problem with regular text e-mails, just HTML. I've repaired permissions, run Disk Utility and Disk Warrior, and I don't know how to proceed.
Can anyone help, please?

Hi lsgmilano, and a warm welcome to the forums if you han't been already!
First I'd backup your whole Mail folder, by right clicking on it in the Finder, then choose Archive/Compress.
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip..
Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
/Users/YourUserName/Library/Caches/Mail
Move to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index

Windows 7 blank error message at logon

Good day computer folks!
I have had a problem for some time with my Asus G74sx, with Windows 7 Home. After boot up, my logon time has gotten fairly long and I get a blank error message box titles only "error". Process explorer groups it under csrss.exe and
calls it only error by way of title, with no file path.
I logged a boot and it says did not load driver: srv.sys, vga.sys, and it attempted to load NDProxy.sys 4 times.
I am at a loss as to what's up with the comp... thanks in advance.

Hi,
In addition to startup repair, regarding slow boot/slow logon issue in Windows 7, please also take a look at the following related articles:
1. Check if we have those Hotfixes installed:
Windows 7 Slow Boot / Slow Logon (Why I do what I do)
2. try the Windows Boot Performance Diagnostics:
Troubleshoot Slow Start Ups with Windows Boot Performance Diagnostics
3. Related blog:
Slow Boot Slow Logon (SBSL), A Tool Called XPerf and Links You Need To Read
Best regards
Michael Shao
TechNet Community Support

Blank error message in Adobe Reader

I have Adobe Reader 9.1 on Windows 7 OS. Often when I click on a link that opens a Adobe file I get a blank page and a BLANK error message from Adobe with only an "OK" to click. If I go back and try again, I get the same thing but as they say, "third time is the charm" and the file will open.
Any suggestions?

Reader 9.1 is not compatible with Windows 7. Update to Reader 9.4.4 or the latest Reader X.

When viewed on QHD display, HTML messages are very narrow and zooming doesn't change width.

I am migrating to a Lenovo Yoga Pro 2 with 3200x1600 13.3" display. I am using ESR17 due to plug-in compatability issues with newer versions (primarily the Funambol plugin for Calendar sync.) I have had to increase the font size to 24 to be able to see the folders and message subjects. I increased the font inside normal text messages using <ctrl><+> but when I view HTML messages, the formatted message body only fills 1/3 of the message pane and using <ctrl><+> only increases the size of the font inside this width resulting in more and more wrapping until single words have to be wrapped.o
Is this issue fixed in a newer version of Thunderbird? Is there a Calendar sync client for Funambol (OneMediaHub) or Google Calendar that works with the newer version? (I have used Funambol to sync my Calendar with my phone (was BB, now Android) for many years.
Thanks
Gerard

I have DPI set to 200. Most of Thunderbird 17 respects this but HTML messages do not. The scroll bar for message body is also verrry narrow. And the icons on the menu bar (e.g. Switch to Calendar Tab) are mircoscopic.
You didn't say which version of Thunderbird addresses these QHD display issues.
I have tried Google Calendar sync but I have had trouble with offline use. Last time I tried it Google's address book seems to be missing fields supported by Thunderbird's address book.

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!

Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do..

Using images in an HTML message

Dear All,
I want to embed 2 .gif files as part of the HTML message which is being sent from one client to another..My clients want me to give them the same effect as Outlook express utility: New Using->Select Stationery->Filename...so that the text can be typed on the image & then sent...i have hardcoded the structure of the message but the problem is that i am only able to send this message & view it only on my m/c & my e-mail id....if i send it to some other id the picture is not displayed how do i handle this
Thank You
Chaitra

import java.io.*;
import java.util.*;
import java.text.*;
import javax.mail.*;
import javax.servlet.*;
import javax.activation.*;
import javax.servlet.http.*;
import javax.mail.internet.*;
public class MailServlet
extends HttpServlet
protected void printForm(String form,
HttpServletRequest request,
HttpServletResponse response)
throws IOException
PrintWriter writer = response.getWriter();
form = MessageFormat.format(form,
new Object[] { request.getServletPath() });
writer.print(form);
writer.flush();
protected void doGet(HttpServletRequest request,
HttpServletResponse response)
throws IOException
printForm(request.getParameter("SendMailForm"),request,response);
protected void doPost(HttpServletRequest request,
HttpServletResponse response)
throws IOException
try
if(request.getContentType().
startsWith("multipart/form-data"))
doUpload(request,response);
else
response.sendError(
HttpServletResponse.SC_NOT_FOUND);
catch(Exception e)
PrintWriter writer = response.getWriter();
writer.println("<HR><B>Oops!</B><PRE>");
e.printStackTrace(writer);
writer.println("</PRE>");
writer.flush();
protected void doSendMessage(HttpServletRequest request,
HttpServletResponse response,
Dictionary fields)
throws IOException, MessagingException
String host = "10.10.40.6";
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
Session session =
Session.getInstance(props, null);
Message msg =
new MimeMessage(
session); /*.getDefaultInstance(
System.getProperties(),null));*/
msg.setFrom(
new InternetAddress(
(String)fields.get("from")));
InternetAddress[] tos =
InternetAddress.parse((String)fields.get("to"));
msg.setRecipients(Message.RecipientType.TO,tos);
if(fields.get("cc") != null)
InternetAddress[] ccs =
InternetAddress.parse((String)fields.get("cc"));
msg.setRecipients(Message.RecipientType.CC,ccs);
msg.setSubject((String)fields.get("subject"));
msg.setSentDate(new Date());
String msgText ="<HTML><HEAD><TITLE id=ridTitle>Eximbirthday</TITLE>";
     msgText+="<META http-equiv=Content-Type content=\"text/html; charset=windows-1252\"><BASE ";
     msgText+="href=d:/Tomcat/webapps/Project/>";
     msgText+="<META content=\"MSHTML 6.00.2600.0\" name=GENERATOR></HEAD>";
     msgText+="<BODY id=ridBody bgColor=#e7e4d9 leftMargin=0 topMargin=0 marginheight=0";
     msgText+="marginwidth=0>";
     msgText+="<CENTER></CENTER>";
     msgText+="<P></P>";
     msgText+="<TABLE cellSpacing=0 cellPadding=0 width=\"100%\" border=0>";
     msgText+="<TBODY>";
     msgText+="<TR>";
     msgText+="<TD vAlign=top align=left colSpan=2><IMG height=69 src=\"cid:hbday.gif\"";
     msgText+="width=366 border=0></TD></TR>";
     msgText+="<TR>";
     msgText+="<TD vAlign=top align=left width=\"65%\" height=2>";
     msgText+="<br><br><FONT color=#0000ff size=5>";
     msgText+=(String)fields.get("body");
     msgText+="</font></TD>";
     msgText+="<TD vAlign=bottom align=right height=2><IMG height=394 src=\"cid:flowers.gif\"";
     msgText+="width=296 border=0></TD></TR></TBODY></TABLE>";
     msgText+="<DIV> </DIV></BODY></HTML>";
     if(null == fields.get("attachment"))
// msg.setText((String)fields.get("body"));
          msg.setContent(msgText,"text/html");
else
BodyPart body = new MimeBodyPart(),
attachment =(BodyPart)fields.get("attachment");
//body.setText((String)fields.get("body"));
          // body.setHeader("Content-Disposition", "inline; filename=flowers.gif");
          body.setContent(msgText, "text/html");
MimeMultipart multipart = new MimeMultipart("related");
multipart.addBodyPart(body);
multipart.addBodyPart(attachment);
          body=new MimeBodyPart();
          DataSource fds = new FileDataSource("D:/Tomcat/webapps/Project/hbday.gif");
          body.setDataHandler(new DataHandler(fds));
body.setHeader("Content-ID","hbday.gif");
     // Add part to multi-part
     multipart.addBodyPart(body);
          // Create 2nd part for the image
     body = new MimeBodyPart();
          // Fetch the image and associate to part
          DataSource fds2 = new FileDataSource("D:/Tomcat/webapps/Project/flowers.gif");
          body.setDataHandler(new DataHandler(fds2));
          body.setHeader("Content-ID","flowers.gif");
          // Add part to multi-part
          multipart.addBodyPart(body);
msg.setContent(multipart);
Transport.send(msg);
response.sendRedirect(response.encodeRedirectURL("/Project/OkForm.jsp"));
public void doUpload(HttpServletRequest request,
HttpServletResponse response)
throws IOException, MessagingException
String boundary =
request.getHeader("Content-Type");
int pos = boundary.indexOf('=');
boundary = boundary.substring(pos + 1);
boundary = "--" + boundary;
ServletInputStream in =
request.getInputStream();
byte[] bytes = new byte[512];
int state = 0;
ByteArrayOutputStream buffer =
new ByteArrayOutputStream();
String name = null,
value = null,
filename = null,
contentType = null;
Dictionary fields = new Hashtable();
int i = in.readLine(bytes,0,512);
while(-1 != i)
String st = new String(bytes,0,i);
if(st.startsWith(boundary))
state = 0;
if(null != name)
if(value != null)
fields.put(name,
value.substring(0,
// -2 to remove CR/LF
value.length() - 2));
else if(buffer.size() > 2)
InternetHeaders headers =
new InternetHeaders();
MimeBodyPart bodyPart =
new MimeBodyPart();
DataSource ds =
new ByteArrayDataSource(
buffer.toByteArray(),
contentType,filename);
bodyPart.setDataHandler(
new DataHandler(ds));
bodyPart.setDisposition(
"attachment; filename=\"" +
filename + "\"");
bodyPart.setFileName(filename);
fields.put(name,bodyPart);
name = null;
value = null;
filename = null;
contentType = null;
buffer = new ByteArrayOutputStream();
else if(st.startsWith(
"Content-Disposition: form-data") &&
state == 0)
StringTokenizer tokenizer =
new StringTokenizer(st,";=\"");
while(tokenizer.hasMoreTokens())
String token = tokenizer.nextToken();
if(token.startsWith(" name"))
name = tokenizer.nextToken();
state = 2;
else if(token.startsWith(" filename"))
filename = tokenizer.nextToken();
StringTokenizer ftokenizer =
new StringTokenizer(filename,"\\/:");
filename = ftokenizer.nextToken();
while(ftokenizer.hasMoreTokens())
filename = ftokenizer.nextToken();
state = 1;
break;
else if(st.startsWith("Content-Type") &&
state == 1)
pos = st.indexOf(":");
// + 2 to remove the space
// - 2 to remove CR/LF
contentType =
st.substring(pos + 2,st.length() - 2);
else if(st.equals("\r\n") && state == 1)
state = 3;
else if(st.equals("\r\n") && state == 2)
state = 4;
else if(state == 4)
value = value == null ? st : value + st;
else if(state == 3)
buffer.write(bytes,0,i);
i = in.readLine(bytes,0,512);
doSendMessage(request,response,fields);
class ByteArrayDataSource
implements DataSource
byte[] bytes;
String contentType,
name;
ByteArrayDataSource(byte[] bytes,
String contentType,
String name)
this.bytes = bytes;
if(contentType == null)
this.contentType = "application/octet-stream";
else
this.contentType = contentType;
this.name = name;
public String getContentType()
return contentType;
public InputStream getInputStream()
// remove the final CR/LF
return new ByteArrayInputStream(
bytes,0,bytes.length - 2);
public String getName()
return name;
public OutputStream getOutputStream()
throws IOException
throw new FileNotFoundException();
This is the latest version ....which again doesnt work!!!!!
Thanx..
Chaitra

KNOWN ISSUE: HTML Messages with plain-text signatures

To get around the EAS security policy issue, I'm having non-sensitive emails from work forwarded to a GMail account from a redirect set up in our corporate OWA. The redirect seems to send the messages to GMail without any issues; formatting is 100% intact, and in the GMail web client as well as Thunderbird, Entourage, etc., HTML emails with plain-text signature attachments show the plain-text message inline with the rest of the formatted message. All of our internal mailing lists have these plain text attachments that say where the message was coming from (Message sent from [email protected] by listserv). These get affixed to every message, both plain text and HTML.
Here's my problem: The Pre's email client handles both plain text and HTML messages beautifully. But, when I receive a message from a mailing list with a plain text attachment, the HTML portion disappears, and all I see is the signature.
Is there any way to make the Pre show the HTML INSTEAD of the plain text? I can live without the sig, I know where the messages are coming from already. But if I can't read the message, it's useless. I've only begun researching this and so far Google hasn't been much help, nor has searching these or other forums. Any help would be appreciated.
Palm Pre P100EWW
Post relates to: Pre p100eww (Sprint)
Message Edited by HowellBP on 06-16-2009 04:13 PM

1-51626418773
I just got off the phone with Palm Support. Apparently this is a bug in the mail application. It currently does not support parsing both HTML and plain text in the same message. It will read EITHER plain text OR HTML, but not both at the same time. This will be fixed in a future update.

How to send Html message in this procedure?

Hi all,
here is one procedure
DECLARE
v_connection UTL_SMTP.CONNECTION;
BEGIN
v_connection := UTL_SMTP.OPEN_CONNECTION('mail.idealake.com',25);
UTL_SMTP.HELO(v_connection,'mail.idealake.com');
UTL_SMTP.MAIL(v_connection,'[email protected]');
UTL_SMTP.RCPT(v_connection,'[email protected]');
UTL_SMTP.DATA(v_connection,'Sent From PL/SQL');
UTL_SMTP.QUIT(v_connection);
END;
I want to send html message throug this procedure.
Please tell me tjhe solution.
Thanks in advance.
Prathamesh.

I also have a copy of send mail package (modified copy of some code that I found on the net). Originally written with utl_smtp. Converted it to utl_tcp. Supports binary file attachments and formatted html messages now.
You can pick it up at my website... http://www.myoracleportal.com

Mail messages disappear - just a blank mail message for all emails

Mail messages disappear - just a blank mail message for all emails.
This happens sporadically since I upgraded to Yosemite 10.10.2.
It happens on all of my machines (Macbook Air, + iMacs) so it must be a software bug.
Is there an update coming through for Mail?

Back up all data. Rebuild the mailbox.

Possible to display null item value as 'All' in blank HTML region?

Apex 4.1
Theme 21
Hi There,
I have select list which has null and other values. I have created a blank HTML region with the following text
Report for the year &P2_YEAR. and for geography &P2_GEOG.
Now P2_YEAR works fine because, it is always populated with a year. However, &P2_GEOG has 'All' as null value since we can see the report for all geographies. However, if the all option is selected, the above &P2_GEOG. shows as null. Since its not a PL/SQL proc, I cannot put in a NVL. I am guessing one possible way is to write a PL/SQL code before region and then check if its null and then try to populate a new hidden field and show, something like that. Wondering if there is a way to do it directly in the HTML region?
Thanks,
Sun
Edited by: ryansun on Jul 2, 2012 12:49 AM
Edited by: ryansun on Jul 2, 2012 12:50 AM
Edited by: ryansun on Jul 2, 2012 12:55 AM

Hi Morten,
in the validation callback you could use apex_util.set_session_state to modify the page items value. We do that ourself in the "Number Field" native item type plug-in.
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Safari 8 downloads a blank.html file issue

Hi all...
I am new to web developing in jsp. I am facing a issue that safari 8 downloads automatically a blank.html file. while safari 7 does not has this isssue.
what may be the reason for this ?
should i configure safari settings or coding problem ?
What to do to fix this issue..
thanx in advance

While you can try switching Off Safari - Preferences - Extensions; and clearing data for that sitein Safari - Preferences - Privacy... it's often a problem with the site coding or server, and can't be fixed at your end.
Of course, if this happens everywhere - still try without extensions, and also test in a new or Guest user account.

Blank HTML messages in Webaccess

Similar Messages

Maybe you are looking for