Blank iphone screen but phone working behind help!

my iphone 4s screen is blank the phone is working behind it, does anyone know why or what i should do to fix this?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

  • My wifes Ipod Nano has blank white screen but still works

    As the topic says, the nano has a blank white screen but still plays songs and works with iTunes. i have tried reseting it via holding menu and select for 10 seconds without success also i have tried holding select and play/pause after reseting (hard reset i guess) without any success.
    I have tried restoring factory defaluts and loading different versions of iPod update without success.

    You can check you service options here: Apple - Support - Service Answer Center

  • Iphone 4 black screen but phone works

    in this case of my iphone 4, is there still possibility to fix it?
    help me please..
    IPHONE 4

    To make sure that this is not software related, set it up as new device :
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If this does not work, the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
    iPhone - Contact Support - Apple Support

  • Black screen but phone works?

    I dropped my phone with a case on ( a cheap one) outside on gravel. I thought it died when i got to work because it was almost dead anyway. Anywho, my phone is working but my screen is black. The touch screen is working because my mother called me and i swiped where i normally would, and it worked but the screen is still black. HELP

    Hi there afitchchicx15,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    -Griff W.

  • Black Screen but still works? Help!

    I was texting a friend and suddenly the screen starts to fade black. I tried to turn it back on but it just stayed black. But when i want to put it on vibrate, it vibrates or when i want to charge it, it makes that sound effect when you plug it in. So it is still working but the screen isn't. Help please?

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT201263 Drove over I Phone 5.   Screen is completely gone but phone works to call out,  I have replaced phone with a new phone but would like to save or transfer remaining photos and contact information on "crushed iP"  Can you help!

    Accidently drove over Iphone 5.   Screen is completely gone but phone works to call out via SIRI.   Of course I cannot download to itunes as I have a passcode lock.   Would like to save my information, contacts and photos.   Any help or ideas would help!!!

    Welcome to the Support Communities. This Apple doc may be of interest:
    Channel Member Code of Conduct
    Kings74 wrote:
    They told my friend that the phone was not available in Black, that was the 5, and that the 5s was only available in silver and gold..
    A minor point, but it may avoid a little confusion if, instead of saying "black" in reference to the iPhone 5s, say "space gray":
    "iPhone 5s — Available in silver, gold, and space gray" (Source)

  • My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

    My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

    Tony,
    My first thought is to make sure that you are actually logged in using the same AppleID on both devices.  Many folks share one AppleID for their family's iTunes Store account yet use another personal AppleID to log into iMessage settings and iCloud settings.
    To confirm that the AppleID and password you are using is correct I would suggest visiting http://icloud.com and attempting to login there.  If you get in, then you know for sure that that is a valid AppleID/password pair.
    If that still doesn't reveal the issue then I would try opening Notes app on both iPhones, and then typing your password out where it can be seen clearly.  This may reveal if your are typing it differently due to iOS 8 changes in the shift key indicator, or possibly that a screen protector or case is causing your touches to not register the same on both devices.
    I hope these suggestions help.

  • Screen won't light on an iphone 3. Phone works and if I look real closely in just the right light, I can read the dark screen. Any idea where to go to have this fixed and how much it might cost?

    Screen won't light on my iphone 3. Phone works and if I look REALLY HARD in just the right light, I can read the dark screen. Any idea where to go to have this fixed and how much it might cost?

    Have a look here:
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    copied from Apple - Support - Service Answer Center

  • My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • ı buy virtual tenis game but doesnt work 3gs help please

    ı buy virtual tenis game but doesnt work 3gs help please

    ALL U.S. iphones are carrier locked and CANNOT be unlocked at all.  They can ONLY be activated with AT&T in the U.S.  No other carrier, no other country.
    No.  A U.S. iphone would have to be returned to the U.S.
    If possible you need to return the iphone to the U.S. for a full refund and buy one in your country.

  • TS1559 my iphone 4s version 7.0.4 wifi turned out grey. i restored my iphone also but didnt work, what shall i do???

    my iphone 4s version 7.0.4 wifi turned out grey. i restored my iphone also but didnt work, what shall i do???

    ChrisJ4203, thanks very much for your input.  I don't mean to turn this post into an endless debate, but frankly I am still having a hard time believing that the WiFi died as a result of a hardware failure.
    My logic might be flawed, but here it is:
    While the iPhone 4S got very hot when wirelessly downloading and installing iOS 7.0.4 over the WiFi network, the WiFi chip and antenna had to be functional to complete the wireless iOS update.  Apple was very clear that iOS 7.0.4 is too large to download and install via cellular service.  Accordingly it would appear that any hardware failure had to occur in the few minutes between the download/installation of iOS 7.0.4 and its first use.  That window of opportunity is incredibly small in an otherwise flawless hardware performance.  I am not a big believer in long shot coincidences, so a WiFi hardware malfunction seems highly improbable to me, but not impossible.  A firmware/iOS conflict still seems more plausible to me.
    I also don't read much into Apple's "out-of-warranty" replacement offer at $199.  AT&T tells me that anyone walking in off the street (with or without a hardware or iOS malfunction) would receive the same offer.
    I appreciate that some iPhone 4S users did not experience any WiFi issues when they updated to iOS 7.0.4, but such difference could easily be explained if Apple used more than one WiFi chip and/or firmware in the iPhone 4S series.  Such an explanation would also account for iOS 7.0.4 (and 7.0.6) not recognizing the WiFi chip after the iOS update.
    Still perplexed, but thanks again for your kind efforts to help.
    Wonder if I can limp along long enough to spend my money on an Apple iPhone 6 ... but then again I don't want to be anyone's beta-tester.
    I am tempted to switch to a Samsung Galaxy or some other smartphone as long as I will be buying new accessories, but frankly I don't want to waste my time learning a new OS or core apps.

  • I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was tking too long and my itouch turned off. now, i can't turn it on.went online and tried everything but nothing works. HELP PLEASE!

    I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was taking too long and my itouch turned off. now, i can't turn it on.went online and tried everything from the troubleshooting assistant but nothing works. HELP PLEASE!

    Have yu tried everthing here:
    iOS: Not responding or does not turn on
    Next see if placing the iPod in DFU mode will allow iTunes to see the iPod so you can restore the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Last, make an appointment a the Genius Bar of an Apple stroe.

  • Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.

    Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.

    alway say it was corrupted
    Restore the iPad as a new device....
    How to set up your iPhone, iPad, or iPod touch as a new device

  • What does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    what does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
    http://support.apple.com/kb/HT1311

  • HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    Many thanks.
    Error 7 (Windows error 127)
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • Delivery address to be defaulted to that of vendor address in returns PO.

    Hi mates, My client is using sap 4.7 . His requirement is that the delivery address in the delivery address tab (item details) during the returns PO should be defaulted with that of the vendor given at the header. At present it is defaulted with the

  • How to Assign Customized BADI to Standard T.Code  Example ME51N

    Dear all, It would be really appriciate if you provide me a solutions. I have Created Customized BADI using SE18,SE19. But I am not aware How to Use those BADI in Standard Transaction. Example : I have Created PR Related BADI (ZPURREQ_ACC_CHK). How t

  • Adding an icon to a custom panel

    Hi, I have created some WindowSWF panels, and want to add an icon to them, so that when they are minimised I can tell what they are. I've googled and checked the 'Extending Flash' docs but can find no reference on how to do this. Anyone have any idea

  • Timed Out Requests

    I turned on performance monitoring on our CF server this morning to hunt down a slowdown and noticed that the counter for timed out requests is constantly sitting at 125 no matter what any of the other counters do. Is this normal or is this an indica

  • Materl. Determinat. not working

    D/ Friends, The doc flow is Q Contract-> Sales Order-> Delu2026In Q Contract we need to capture qty with a dummy material. In Sales Order the dummy material has to be replaced by the actual materials. To map that, Iu2019ve configured mat. determinati