Blank mail messages IOS

Hi
Since yesterday I keep receiving some blank mails. (no sender, no subject,... strange date).
Before yesterday everything was working fine.
I've tried everything
- reset the Iphone, hard stop the app mail, re enter the mail accounts...
When I click on the individual inbox, it works. But not in All Inboxes.
Hope someone can help me !
ciao
olivier

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Similar Messages

  • Mail messages disappear - just a blank mail message for all emails

    Mail messages disappear - just a blank mail message for all emails.
    This happens sporadically since I upgraded to Yosemite 10.10.2.
    It happens on all of my machines (Macbook Air, + iMacs) so it must be a software bug.
    Is there an update coming through for Mail?

    Back up all data. Rebuild the mailbox.

  • Blank Mail Messages Problem

    I upgraded to lion on my mid 2010 MacBook Pro a few weeks ago. Now, in Mail, some of the messages show up blank when I open them. The middle column shows the sender and date and all, but when I open the message the reading pane is blank. Solutions?Mail

    Hello Partners in Pain,
    I fixed this by renaming the mailboxes containing the empty emails. I didn't even have to restart Mail.
    After installing Mavericks and 10.9.1 update a week ago, Mail was working fine. Today, however, out of the blue, the email content disappeared from some of my mailboxes inside Mail app -- they were "On My Mac", and had come from a mix of POP and IMAP accounts.
    I was planning to import my back-up mailboxes. To avoid conflicts, I renamed the mailboxes in the Mail app itself. For instance, I just double-clicked mailbox "Clients" and renamed it to "Clients1". After that, all email content was back in the (now renamed) mailbox -- no need to import anything.
    All's well now (knock on wood) and I'm not curious at all to see what happens if I rename them back.
    Best of luck,
    Monkha

  • Blank Mail Messages

    All of my messages that are in my inbox on only one account (my exchange account) have gone blank suddenly. The inbox still shows there is a message but when clicking on it absolutely nothing appears in the preview. When I double click the message to enlarge it nothing happens. I have rebuilt the mailbox, I have deleted and re-added the mailbox. I have restarted the computer. Nothing seems to fix this. Please help!

    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • BLANK MAIL MESSAGES USING OUTLOOK

    Hi - I apologise for throwing this one in again - but I need to get an answer and haven't been able to find anything yet.
    I am using a MacBook Pro with OS x Ver 10.6.8.  For mail within our company we use MS Outlook.  verything was fine up until a few weks ago.  Messages appeared at Yahoo, came through on the Blackberry and came onto the MacBook in Outlook - all was well.
    Something then happened - messages still appear in Yahoo and on trhe Blavkberry - the mesage appears in Outlook but when th emessage is opened there is no text within it!!  The message sender details and the subject are all there - but no text below it.  If I send a message or reply to (a blank message) my response text appears OK.
    Anyone got any ideas please?
    Tony Duckowrth

    Am afraid that none of that helped.  Have tried to get updates for software - but if and when you try you get a response that say's no updates available - what can you do?
    This went on for about three months, tried many forums and groups, tried Apple direct with no response at all.  Tried Microsoft to see if a problem with Outlook - a good forum but no solution.  No response at all from anyone at Yahoo.
    The only thing I could do was to create a completely new profile on the Mac, recreate the mail profile in the new profile and all the mail at Yahoo came through fine.  Then had to copy across all the files etc - from the old profile to the new.  A complete bore.
    You would think that the likes of Apple and Microsoft - who must know that these 'help forums' exist - might monotor what s going on and maybe tried to fix some of these things that just happen - for no good reason.

  • New mail message, tab to body doesn't work

    I have an Automator app. on my desktop that jsut creates a new mail message. It does not pre-fill any information, just a new, blank mail message.
    The problem is, I can type the recipients address, tab to the Subject and type that. Then, when I try to tab to the message area or body, it just highlights the Subject and will not tab forward.
    Any ideas?

    The bug affects all applications that interact with Mail by way of Apple Events. Such apps as iPhoto, Automator, and AppleScript all use Apple Events to compose the buggy message. Until Mail's AE behavior is fixed, the only things I can offer are workarounds.
    The previous script merely emulates user input instead of sending Apple Events. This is a bit of a kludge, and on second read a more precise solution would have been to invoke a blank mailto link:
    click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">open location "mailto:"</pre>A workaround for your iPhoto-to-Mail bridge would be very difficult to conjure (if it's even possible) and unreliable at best. :\

  • Mail message is blank.

    Even after the update 10.5.1 some mail messages send by a PC user are completely empty, I thought.
    But when I look at the version there is a message. When I dig into the /library/mail/mailboxxes and then look for the messages folder and do a quicklook on the .emlx file the message is shown. Not empty at all. Does anyone have solution?

    I don't have a specific reply, but the same sort of problem. E-mail messages sent from someone else with a G5 with Leopard 10.5.1, using a pop e-mail server, come up completely blank! But all my other messages from various other sources, including PCs from the same pop e-mail server are fine. The same person has also tried sending me a message from their machine with their .Mac account and I can see that e-mail just fine.
    Also, ALL of my e-mails do not show me the header information. I have to run the mouse over the header area and click on the drop-down arrow that appears to view who has sent the e-mail, and to whom it was addressed!
    Can anyone help me with this? I am currently at a loss of how to take care of this!
    Thanks!

  • Mail Messages Suddenly Blank!

    New messages display properly, but about 1 hour ago for no reason my older messages are just showing up as blank. It's almost as if it can't find where they are whats happened? When I double click the message just BLANK!!
    Screen Shots Here
    http://windmachine.biz/wp-content/themes/Windmachine/lewsfiles/1.png
    http://windmachine.biz/wp-content/themes/Windmachine/lewsfiles/2.png

    This problem is most probably related to indexing messages and you can simply solve it by following these steps :
    (1) Quit Mail if it's already open
    (2) Copy your ~/Library/Mail folder to your desktop as a backup incase something goes wrong
    (3) Trash or move to desktop that file ~/Library/Mail/Envelope Index
    (4) Open Mail and you will be presented with a Mail Message Import message, click continue and let it do what it has to to
    That would simply import and reindex all mail messages rebuilding the database, Envelope Index is a SQLite database that stores key information about your emails. Over time it can get corrupted in a way that wouldn't knock out your Mail application. Furthermore, that should speed you your Mail application and dramatically reduce your emails size. I hopt that will solve your issue

  • My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
    There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
    Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
    Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
    Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
    In Mail, choose File/Import Mailboxes....
    Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
    It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
    I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
    Problem solved - for me anyway!!
    Hope this helps.

  • Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

    Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • WebI reschedule e-mail message blank

    We have a scheduled report that e-mails to specific users the report link and an e-mail message.  We go to the report - right-click - history; click on the recurring report - actions - reschedule.  In the Destinations Options and Settings the e-mail Message specified in the scheduled report is blank?  Is there a setting to have the e-mail message retained when you reschedule a report?

    Hi
    Most email service providers offer a web based interface to read/write/delete emails. On a number of occasions I've been forced to use my ISP's web interface to delete certain emails. For some reason, the main culprits for me are "Undeliverable" notifications sent from my employer's Exchange server. Invariably I'm unable to delete them via Mail and I have to login to the web server instead.
    Bob

  • Since I have updated to ios 6 I cannot read the full text of mail messages

    Since I have updated to ios 6 I cannot read the full text of mail messages. With previous versions everything worked fine. The only way to read the full text is to answer the mail. Thank you for your help. Regards.

    Close out of the mail app.  Double tap the home button, find the mail app hold down until you see the red minus sign and hit that.   then go back into the mail app and open an email you should now be able to read the full content of the email.

  • I get a message IOS 6.1.2 failed verification because you are no longer connected to the internet .  i checked my connection to internet and its fine for mail and all other internet use only keep getting nowhere fast.

    i get a message IOS 6.1.2 failed verification because you are no longer connected to the internet .  i checked my connection to internet and its fine for mail and all other internet use only keep getting nowhere fast

    Just Power off your Iphone wait for 10 seconds and then power on again and got to settings and software update it will download the update once again and it will work fine.

  • Mail Messages Going To Drafts Folder

    Almost every mail message I compose - both new messages and replies - are showing up in the Drafts folder.  These seem to be identical to messages after they are sent and appearing in the Sent folder.  I'm not saving them at any time, so why would these messages go to "Drafts"?
    Thanks,
    JD

    While indeed unchecking this option stops the behavior, it's not the best of solutions.  The options to save drafts on server is available with any decent IMAP program, and generally is very beneficial.  Say I start a message on my Mac, and then have to leave before it's done.  If it's saved to the server, I can then pick this message up later on my iPhone or iPad and complete it and send it.  Or I can start it on an iOS device, have it save to the server from there, and then pick it up on my Mac later to complete.
    So, the functionality of "Save drafts on server" is widely known amongst IMAP clients, and it would be nice if Apple Mail would simply replace a previous draft of a particular message with the latest version rather than piling up multiple versions of the email.  Also, it's customary that when you eventually send the message, the drafts also disappear.
    It would also help if there was a way to increase the auto-save time to a longer setting so that they don't pile up so fast.
    Danita

  • In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

    So, I have found the article
    http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
    However, there is a basic problem that I run into before I get started.
    I am logged into the system as a regular user (ie not a farm admin, etc.).
    I do, however, have full control on the site on which I am working.
    I create a custom list.
    I create a simple one step approval - sharepoint 2010 out of the box workflow.
    I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
    I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
    All I see is "open", "open in a new tab" and "Pin".
    I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
    So, I click on Lists and Libraries, then on the name of my custom list.
    When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
    When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
    I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
    Is there someone who has some advice on how to find this copy and modify option?  Or perhaps a web site, web forum, article series, or book covering the topic?
    Thank you! 

    Hi lwvirden,
    According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
    After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
    If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
    Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
    Copy and Modify button.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for