Blank Message Window when starting Mail.app

Anyone experiencing this in Snow Leopard? Occasionally when I start up Mail.app there will be nothing in the message viewer, "Inbox" is selected still but no messages show and the top bar says Inbox where it usually says Inbox (No. of messages here).
I have to select another folder and then select "Inbox" again before anything shows. I did a clean install + import of mboxes and I already did a rebuild. Just getting a bit irritating.

same situation here. After installing SL on two other Macs the third one is having problems with the Mail app. It starts and is just showing the menubar; no window not even a blank one. After installing just the Mail app again from the DVD, Mail starts and I can get the main window from the menu (Fenster -> Hauptfenster) but I can only see the Mail folders in the left pane, *no message list*, *no preview content*
Even worse, I can't quit the Mail app using the menu. I have to do a *force quit* within the Finder.
I have searched this forum and tryed all the (good) suggestions without success.
What's next?

Similar Messages

Mail regularly open the new blank message window

After Mail initial start the programm opens a new blank message window. When I try to close it I receive the message "Do you want to save it as a draft and work on it later?"
The new blank message window appears regularly every 4-5 minutes. How can I fix it? And thanks in advance for response and help.

Do you see the Outbox in Mail? Does it contain any messages?

Mail basically dead - blank message window?

Just did something stupid (I think). I deleted my wife's mail app! Then I tried to reload it by updating Leopard. Now it will open but no message window - when I open it via window/message viewer it brings up a window with a dot in the middle - that's all. Most of the menu items are grayed out and I have to force to quit. What's going on.

HI,
*" Then I tried to reload it by updating Leopard."*
Leopard or Snow Leopard...
Try reinstalling the Mail application from the SL disk.
Insert the Snow Leopard install disk. Open the Optional Installs folder, then open Optional Installs.mpkg
An Installer will start... click Continue. When you get to the Installation Type in the window on the right you will see: Applications. Click the Disclosure triangle so it faces down. Select the Mail app and click Continue.
When the installation is finished, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Windows 8.1 Mail App - Cannot Send Mail

The fact that this problem has been ongoing for TWO+ YEARS with no clearly defined fix makes me want to take my SP3 back to the store and go buy an iPad, even though I hate Apple products. I think I'm voicing the frustrations of the people here when
I say that I've been searching for over an hour with no possible fix in sight, and an apparently apathetic Microsoft.
Dear Microsoft,
Your Mail App STILL has this issue: it randomly decides that it won't send any mail and so every outgoing e-mail sits in the Outbox of the app. This seems to be some kind of password-crossing issue where multiple passwords from multiple accounts get switched.
However, I've been searching for over an hour and CANNOT find a fix to this problem despite the many unanswered/unresolved forums and questions regarding this 2+ yr old problem.
By the way, thank you so much for removing the ability to go into Settings > Account within the Mail App and change the password. Now I have no idea how to fix your issue even manually. Please put the setting back so I can fix it, or just release a version
of the Mail App which WORKS.
Thanks a bunch,
Twixte
In the meantime, has anyone else figured out how to temporarily resolve this annoying issue? Is there a setting I can change or do I just need to completely disconnect my Microsoft account from my SP3 before I can actually send mail again?

Hello Twixte,
Do you receive any error message when the Mail App fails to send the email?
Please refer to the following article about troubleshooting the problems with Windows Store app.
http://windows.microsoft.com/en-HK/windows-8/what-troubleshoot-problems-app
1. Download and run the Apps troubleshooter.
2. Make sure the app isn’t blocked by Windows Firewall
3. Try to uninstall and reinstall the Mail app.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Tuchpad stops working when starting any app

Hi,
My mousepointer stops when starting any app. Works fine after starting anything, at the desktop, but as soon as I start any program, systemsettings or else it stops to work.

I'm having pretty much the same problem. When I try to launch InDesign CS5.5 I receive the error message from Windows: Adobe InDesign CS5.5 has stopped working.
I have the Creative Suite 5.5 Design Premium Student and Teacher Edition, running on Windows 7 Home Edition Premium 64 bit
I have tried opening InDesign directly and get the error message, and I've tried opening from a document and get the same message.
Recently I had to move to a new computer, as my old hard-drive boot died on the old one, so I was not able to uninstall Creative Suite 5.5 from the old computer. However, the rest of the Suite works fine, just not InDesign.
I have tried the fix as per Peter Spiers' post above; I renamed the InDesign SavedData file, but there was no InDesign Defaults file. I searched for adobefnt*.lst files, but there were none.
I've not successfully used InDesign since loading it on this new computer, so perhaps this makes a difference?

Windows 8.1 Mail App doesn't sync Exchange account on desktop but does on laptop

I was referred to this forum by another Microsoft engineer, and while I do not believe this is where this problem can be resolved, I'm following his instructions.
I have Windows 8.1 on my desktop PC and an ASUS X205TA laptop. For several months, the three accounts I have under Mail (two Outlook.com accounts and one Microsoft Exchange work account) synced properly on my desktop.
In fact, the Mail app on my desktop worked fine with my Exchange account from the first time I used it under Windows 8 in 2012. The version didn’t seem to matter – whether it was Windows 8 Consumer Preview, Windows 8, or Windows 8.1, the Mail app
connected to my Microsoft Exchange account simply by filling in my email address and password.
Sometime this past summer, however, in the July timeframe, the Mail app stopped synchronizing with my Exchange account. In an effort to repair it, I removed and attempted to reinstall the account. This time, it would not let me load the Exchange account, even
when including additional information (domain, server, user name, et. al.).
This past fall, I purchased the ASUS notebook with Windwows 8.1 installed, and I was able to successfully load my Exchange account in Windows Mail using just my email address and password, as well as the two Outlook.com accounts, and all three accounts synchronize
properly. When I went back to my desktop, however, I noticed that the Liberty email account was listed under my Mail app. Apparently, since my laptop and desktop configurations are registered under the same Microsoft account, when they synchronized, the Liberty
email account which I successfully loaded on my notebook appeared on my desktop system as well.
The Mail app on the desktop, however, still can’t synchronize with my Exchange account so, in effect, I’m back to where I was in July. I would also add that I'm running Microsoft Outlook 2013 on my desktop and laptop and, in both cases, all three of my email
accounts are installed and working properly.
I don’t know if this information gives you insight into what the problem might be, but it’s apparent that there’s something in the configuration of my desktop Windows Mail app that is causing the problem. It’s working just fine on my notebook.
I've uninstalled and reinstalled the Mail app multiple times, run the App Troubleshooter, and tried a Clean Boot installation of the Exchange account. None of these fixed the problem.
As I told the other Microsoft engineer, if this were an Exchange problem, I wouldn't be able to connect to my Exchange account in Outlook 2013 on my desktop and my laptop, nor would I be able to connect to my Exchange account using Windows 8.1 Mail
on my laptop.
The problem is specifically with the Windows 8.1 Mail app on my desktop PC, and its sudden inability to sync with my Exchange account after it worked in every iteration of Windows 8 since 2012.
I have posted this issue in this forum as suggested, but my troubleshooting does not point to an Exchange problem, but rather a Windows 8.1 Mail app problem on my desktop PC.
Can you help?

Hello ronontheright,
Do you mean that only the Exchange account in the desktop Mail app can’t sync?
Please take a look at the following article.
http://blogs.technet.com/b/exchange/archive/2012/11/26/supporting-windows-8-mail-in-your-organization.aspx
Exchange ActiveSync can be used to sync data for email, contacts, and calendar. The Windows 8 Mail app supports Exchange ActiveSync.
Please open the Windows Store app Calendar and People to check if they can normally sync.
Please try to remove the account in Mail app and sign in again and check if the issue still exists.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Starting mail.app in the faded out-mode???

I configuered my account to start mail.app faded out, but starting tiger, the main windows appears in the front. All other apps are okay.
I remember, I had this problem in an earlier version, but an update repaired it. Waiting and waiting for an update, but nothing happens.
Has anybody an idea, what I can change?
Thanks
iMac Intel 2.0 Mac OS X (10.4.3)

I mean "in the invisibel mode". The word fade out is wrong i think.
in the systempreferences for the user I can define, which program should loaded at start up. If I say: start iTunes invisibel, i do not appear, it is running in the background, but I do not see anything of the app.
Opening mail.app, the main window is visibel, it is not in the front. It is not possible to see the desktop.
In earlier versions it was possible to let mail.app run but do not see anything of the app.
Has anybody an idea? Thank you very much.

Exchange 2010 Activesync with the Windows 8.1 mail app limited to 10 MB attachments?

We have a few executives that want to use the mail app on their 8.1 tablets to access our Exchange 2010 SP3 Ru7 servers via Activesync. They get connected and can sync mail, but when they
try to download attachments that are larger than 10 MB, they get an error (Sorry I don't have the exact wording) the error doesn't say anything about attachment size limit, but it works if the attachment is 9.5 MB and they get the error as soon
as the attachment is greater than 10 MB.<o:p></o:p>
I tested the app with the same attachments greater than 10 MB with an Outlook.com account and it works ok on the Windows 8.1 tablet.<o:p></o:p>
I also tested using an IPad against the Exchange servers and I can download attachments greater than 10 MB just fine.<o:p></o:p>
So it looks like only the combination of Exchange (2010 in my case) and the Windows 8.1 mail app has the limitation?
<o:p></o:p>

ActiveSync is limited in the same manner that OWA and web services are. See the following page to see how to increase this limit:
http://technet.microsoft.com/en-us/library/aa996835(v=exchg.141).aspx

Not to display Yes/No/Cancel message window, while closing Oracle Apps Form

Hello All,
I have a requirement,where we need to avoid displaying Yes/No/Cancel message window when trying to save the changes in Oracle Applications Form.
Please do let me know how to achive this.
Thanks a lot in Advance.

Hi Ramesh,
Thanks for the Update.
I have used the below code in KEY-EXIT
CLEAR_FORM(NO_VALIDATE);
EXIT_FORM;
Also the code behind the button which submits the conc.program:
DECLARE
l_request_id NUMBER;
vRESP_APPL_ID number;
vRESP_ID number;
vUSER_ID number;
BEGIN
--vRESP_APPL_ID := apps.FND_PROFILE.VALUE('RESP_APPL_ID');
--vRESP_ID := apps.FND_PROFILE.VALUE('RESP_ID');
--vUSER_ID := apps.FND_PROFILE.VALUE('USER_ID');
--apps.FND_GLOBAL.APPS_INITIALIZE(vUSER_ID,vRESP_ID,vRESP_APPL_ID);
apps.FND_GLOBAL.APPS_INITIALIZE(2340,20420,1);
l_request_id := FND_REQUEST.SUBMIT_REQUEST ('XXAHS',
          'XXAHSRPDSR',
     null,
                    sysdate,
                    FALSE,
                    '|020|080|031|161|030|100|131|',
                    '11-JAN-10',
                    '|41|42|43|45|',
insert into temp_amk values(15);
commit;
message('request id:'||l_request_id);
exception
when others then
message(sqlerrm);
end;
This code worked fine, in case I ran from SQL Prompt.
Please let me know what must be missing.
Thanks.

TS3682 back up is corrupt message shown when start back up what it means ?

back up is corrupt message shown when start back up what it means ?

If I am guessing that app correctly, then install the latest s/w version 1.5.9.
Was at 1.4.3 previously and faced the same issue as yourself when I upgraded to iOS 5.0.1. Solved it by grabbing the latest sms export s/w.

Clicking curved reply arrow in status column produces blank message window

I have a bunch of messages in an On My Mac mailbox for which clicking on the curved reply arrow in the status column opens a blank message window with the wrong title. Something has obviously gone wrong with the links.
Is there a way to fix this?

Let it be recorded here that the solution is to quit Mail, remove the "Envelope Index" file from ~/Library/Mail, relaunch Mail and allow it to import all of your mail. The solutions posted elsewhere about rebuilding the sqlite3 database with the "vacuum" parameter aren't sufficient. I've also discovered that changing the return address associated with a particular mail account will break the links between messages and their replies.

I am unable to sync my iCloud email with the built in Windows 8.1 mail app

I can not sync my iCloud email with the built in Windows 8.1 mail app. I've looked on Apple's website and followed instructions for entering the mail settings but every single time I have tried it will not connect. Any ideas?

This windows 8 app can sync with iCloud/Google calendar.
http://apps.microsoft.com/windows/app/winpim-calendar/08436f52-dded-44a5-9508-c2 b22235ac1d

Blank Message Box when Saving a report in InfoView

Post Author: Jmusser
CA Forum: Administration
I'm getting a blank message box when I try to save any report from any folder in infoview for users I have setup in the following Group. Has anyone run into this on know what is set wrong in security?
We are running BOXI2. I have setup a custom security group for InfoView Users that grants rights to the following in Home > BusinessObjects Enterprise Applications > InfoView >- all other rights are not specified
Log on to InfoView and view this object in the CMC
Edit this object
Search for simple text
Do an advanced search
Filter object listing by object type
View the favorites folder
View the Inbox
Create categories
Assign categories
Send documents
Create folders
At the top level folder I have permissions granted as
General
Add objects to the folder
Denied
View objects
Granted
Granted
Edit objects
Granted
Granted
Modify the rights users have to objects
Denied
Schedule the document to run
Denied
Delete objects
Denied
Define server groups to process jobs
Denied
Delete instances
Denied
Copy objects to another folder
Granted
Granted
Schedule to destinations
Denied
View document instances
Granted
Granted
Pause and Resume document instances
Denied
Securely modify rights users have to objects.
Denied
Reschedule instances
Denied
Schedule on behalf of other users
Denied
Allow discussion threads
Granted
Granted
View objects that the user owns
Granted
Granted
Edit objects that the user owns
Granted
Granted
Modify the rights users have to objects that the user owns
Denied
Delete objects that the user owns
Granted
Granted
Delete instances that the user owns
Granted
Granted
View document instances that the user owns
Granted
Granted
Pause and Resume document instances that the user owns
Granted
Granted
Securely modify rights users have to objects that the user owns.
Denied
Reschedule instances that the user owns
Denied
Desktop Intelligence
Refresh the report's data
Granted
Granted
Refresh List of Values
Granted
Granted
Use Lists of Values
Granted
Granted
View SQL
Denied
Export the report's data
Granted
Granted
Download files associated with the object
Granted
Granted
Desktop Intelligence Add in
Download files associated with the object
Granted
Granted
Desktop Intelligence Template
Download files associated with the object
Granted
Granted
Report
Print the report's data
Granted
Granted
Refresh the report's data
Granted
Granted
Export the report's data
Granted
Granted
Download files associated with the report
Granted
Granted
Web Intelligence Document
Refresh the report's data
Granted
Granted
Edit Query
Denied
Refresh List of Values
Granted
Granted
Use Lists of Values
Granted
Granted
View SQL
Denied
Export the report's data
Granted
Granted
Download files associated with the object
Granted
Granted

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Why are not pop up message window when message type I and W

Hi All,
I am working in BADI ( me_purchdoc_posted~posted) for t-code ME21N. Actually i want show material number, material description and ABC indicator of material at saving point of PO if material is significant.
code is properly working but does not showing error message window when I am using message type I (information) or W (worming message) .
if i am using message type E ( error message )then showing message window just link Information message.
So i can no understand why are not message window pop up when i take message type I and W.
my code is that
method IF_EX_ME_PURCHDOC_POSTED~POSTED
IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21'.
DATA : wa LIKE LINE OF IM_EKPO.
DATA : VAR_MAKTX TYPE MAKT-MAKTX.
DATA : VAR_MAABC TYPE MARC-MAABC.
DATA : P TYPE STRING.
DATA : P1 TYPE STRING.
LOOP AT IM_EKPO INTO wa.
    SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ wa-matnr AND werks EQ wa-werks.
    SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ wa-matnr. " AND werks EQ wa-werks.
      IF VAR_MAABC EQ 'A'.
        P = 'is significant material'.
        CONCATENATE WA-MATNR '(' VAR_MAKTX ')' P INTO P1.
        MESSAGE P1 TYPE 'E'.
        EXIT.
        ENDIF.
ENDLOOP.
ENDIF.
endmethod.
guide me...............

Hi vinod,
thanks for reply......
yes, my requirement is to show the popup window with material number, material description and ABC indicator of material at saving point of PO if material is significant.
I find Badi to transaction me21n at saving PO. Badi ME_PROCESS_PO_CUST does not exist.
so i am using Badi me_purchdoc_posted~posted.
This Badi ( me_purchdoc_posted~posted ) is properly working But showing message "system error ( error in method po_post ) "
when I am click on OK then automatic leave from transaction.
guide me..........

Not showing pop up message window when message type I and W

Hi,
My requirement is to show the popup message window with material number, material description and ABC indicator of material at Every line item of PO in Transaction ME21N , if material is significant.
I find Badi to transaction me21n ME_PROCESS_PO_CUST~PROCESS_ITEM
actually i want show only information about material.
This Badi ( ME_PROCESS_PO_CUST~PROCESS_ITEM ) is properly working But does not showing Popup Message window
when i am using Message Type 'I' or "W" .
<Coding>
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
BREAK-POINT.
BREAK-POINT.
    IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21' . " ) AND MEPO1211-werks IS NOT INITIAL. " AND IM_LGOBE IS INITIAL.
   BREAK-POINT .
DATA : VAR_MAKTX TYPE MAKT-MAKTX.
DATA : VAR_MAABC TYPE MARC-MAABC.
DATA : P TYPE STRING.
DATA : P1 TYPE STRING.
DATA: ls_mepoitem1 TYPE mepoitem,
      ls_header_obj TYPE REF TO if_purchase_order_mm,
      ls_header   TYPE mepoheader,
      lc_werks(1) TYPE c,
      lv_fabkl    TYPE t001w-fabkl,
      lv_plifz    TYPE ekpo-plifz.
   *Get header data
ls_header_obj = im_item->get_header( ).
ls_header     = ls_header_obj->get_data( ).
*Get Item Data
ls_mepoitem1 = im_item->get_data( ).
    SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ ls_mepoitem1-matnr AND werks EQ    ls_mepoitem1-WERKS.
    SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ ls_mepoitem1-matnr.
      IF   VAR_MAABC EQ 'A'.   "LS_MEPOITEM1-SPINF EQ 'A'.
        P = 'is significant material'.
        CONCATENATE LS_MEPOITEM1-MATNR '' '(' VAR_MAKTX ')' '' P INTO P1.
       MESSAGE p1 type 'I' .
        EXIT.
        ENDIF.
        ENDIF.
endmethod.
guide me.....

Hi
Please, see SAP Note 310154 - ME21N/ME51N: Customer-specific check, generating error log
I hope this helps you
Regards
Eduardo

Blank Message Window when starting Mail.app

Similar Messages

Maybe you are looking for