Blank Page at the end of the report

Hi
In my report i did not have any pagebreak or section break.
But some times i am getting extra blank page at the bottom of the report .
How to avoid this ..
Thanks in Advance
Have a Nice day.

Hi,
It is very probable that you are have unncessary space somewhere before the end of your template.
Use Ctrl+Shift+* to show the end of line markers and remove the unnecessary spaces in your
template then run again the view report.
cheers
Jorge
p.s If your question was answered then please grant the points and close the thread

Similar Messages

Blank pages at the end of the report

Post Author: gayatrys
CA Forum: General
Hi
In a report we are having nealy 45 sections consisting of group headers and its sections like group header a,b etc. the issue is we have suppressed the section, by using formula in "suppress(no Drill Down)" but at the end of the report, a page header and footer is displayed for the suppressed detail and group footer sections.

Post Author: sharonmtowler
CA Forum: General
in the section expert select supress blank section on all sections
try to minimize the size of the section, the blank page is because it is extending beyond standard page size.

Page break at the end of a report

Hello,
I am using Report Builder (Developer Suite 9.2) to generate a text file.
The problem is that, at the end of the generated file, there is a "strange" character (^L = page break).
How can I avoid to have this character at the end of the file?
I generate the report using the following parameters:
DESFORMAT = dflt
DESTYPE = File
MODE = Character
Can you help me?
Thanks.
Raffy

I see the same now. I created a simple report in 9iDS and ran it on the command line:
C:\>c:\ora9ids\bin\rwrun module=module1 userid=un/pw@mydb desformat=dflt destype=file desname=c:\temp\output mode=character
At the end of the report there is a hexadecimal C, which is the form feed character.
I know that when you use mode=character reports searches for a printer definition file. You can find this in the online help:
When the MODE is CHARACTER, DESFORMAT specifies a printer definition, such as hpl, hplwide, dec, decwide, decland, dec180, dflt, or wide.
Check the printer definition file. I never worked with these files, so I can't help you there.

How to retain the master slide background at the end of the quiz reporting page of a project

I have noticed that the content of the master slide is not retained till the end in the quiz results page of the project. What should I do to retain the contents till the end of the project?

Hi,
Thanks for your time. I have checked the transitions. i didnt give any transition to the slides in the project and i also check the preferences too, i had disable the options that is to fade in and fade out. My problem is "I have 12 slides in this with an intro slide and 10 question slides and then the quiz results page. In that result page, it is showing the result at the end of the result slide the pause button in the skin turned to play button. While clicking that play button it shows only the results, review quiz button and retake quiz button only. It doesn't display the images, widgets, text and some other options which is used in master slide or in the slide itself " Why those things have disappeared? Can you guide me how to overcome this issue.
The solution for the playbar is quiet good. One more doubt in that, The play bar should be displayed in that page but it should be disabled, Is there any solution for this? If yes, kindly share with me

Is it possible to INSERT a blank page Between existing pages? Everytime I try it inserts the page at the END of the document.

Everytime I try it inserts the page at the END of the document. The HELP is no help, and I can't find any other documentation on being able to do this. Appreciate the feedback. Thanks! - ph

AP,
As Fruhulda notes, a Section Break is an Inline character that will move all text below it to the next page. With a combination of graphics and text, and with the graphics having the property of Object Causes Wrap turned on, you will get these apparently odd behaviors. This is why I often favor the Page Layout mode myself. As many experienced users will say, you can do anything in a WP doc that you can do in a PL doc, but in my opinion the WP features often get in the way of simple operation when graphics are involved.
Glad you are on track now.
Jerry

How to find end of the Page in Crystal ? or I need to add one Horizontal line at the end of the page.--- URGENT HELP NEEDED

Hi friends,
I need to add one horizontal line for the detail section at the end of the page.
I tried to put that line in page footer and i tried with Box also. Both are not properly working. Some space problem is coming.
Is there any feature to find end of the Page.
I want report format like this.
set id | set name | date Name
1         x           dddd   vijay
                        dddd   sarathi
                        dddd    reddy
(End of the page)
Thanks in advance...
vijay.

Do you know how many detail records are showing up per page?
If you do - you could create a Details B section that is suppressed except for on Record N (where N is a counter, and N is the last Detail record that will show up on a page).
The Page footer is indeed built so that it will be rendered at the bottom of your physical page of paper.

How to avoid printing a balnk page at the end in the Adobe form output

Hello Experts,
Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
I have a master page with header n footer and a body page seperate.
For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
"after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
Can someone guide me as how to solve this problem.
Any help is appreciated. Thanks in advance.
Regards,
Mahesh

hey mahesh,
this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to initial or space).
This can be handled by doing the following
By knowing the number of line items by the following stmt.
describe table itab lines v_lines.
Now you have the value in v_lines.
use a counter in ur form and keep it increasing it by 1 ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
this should be along with the condition which u have already put, ie when ever line item no changes
when both these conditions are satisfied , then only the new page will be triggered.
Hope it helps,
Reward if useful,
Regards,
KP.

Blank page displaying when clicking on the service in ESS

Hi All,
MyExpenses & Leave Request services under ESS is displaying blank page when i log into the portal with test user. When i log in with my user id , both are opening and working properly.
all the remaining services are working properly. for some users, it is working properly and for some users it is displaying blank page.
To work the service properly with the test user, what properties or authorizations i have to set in portal / backend.
pls post answers. This is the third time i am posting this question. I did not get answers for this... its very urgent issue.
Regards,
Vila.

Hi,
The problem seems to be due to lack of proper authorisation.
Go to Portal content->Contents provided by SAP->Open the permission editor of the folder 'End User Content'.
Therein enter eu_role and check the box corresponding to the end-user. Now assign the users eu_role and ESS role.
If everyone is going to use ESS, then 'End User content' to the Group 'Everyone' with read access and then assign the ESS role to the 'Everyone' group.
Hope this helps !
Regards
Srinivasan T

TS4592 I have an ibooks file that when I make a change to a page in one chapter it throws a bunch more pages in at the end of the chapter from another chapter in the book. Anybody have any ideas what is going on?

I have an ibooks file that when I make a change to a page in one chapter it adds additional pages at the end of the chapter from another chapter. Any ideas what is going on and how I can fix this?

Text pages? from what you say you are getting the auto flow function to add pages either because you have flowing text or because you have a lot of blank lines as you would if you tap return to move blank space around.

Field is moved at the end of the page.....

When i run the report in report builder the first page is displaying the fileds and data perfectly but in next page the fields are moved, first field is moved at the end of the page i.e the second page have only the first field and the rest of the field is moved to third page.
How to resolve this?
Thanks and regards,
Skud

Kiran,
Draw a line in page footer with 1 pix or 2 pix whatever you want.
Regards,
Senthil Maruthappan.
Team work never fails

How to add a sub report at the end of the main report whilst grouped

Hi!
I have a main report that is grouped by the Customers name and then details of transactions they did with the company.
I need to add a letter at the end of each group for each customer (With their name displayed in the letter). I tried adding a sub report in the report footer, but it only appears once at the end of the report, rather than at the end of each group for each customer.
How can I achieve the desired result?
Regards
Vik

Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason

Sequence header at the end of the sequence in the report

Good afternoon everyone,
I have a strange issue with my TestStand Report (any kind of report type) : some time ago the headers (with the name, the parameter's values, the module time, the status) of the sequence and sub-sequence were at the begining. Now they are a the end of the sequence, which means instead of having the status of the sequence first, I have the status of all the steps contained in the sequence BEFORE having the status of the sequence.
I have checked and double checked the Report options : nothing tells that the headers must be at the end.
I have 2 bench on which my sequences are running and one of them has the sequence headers upside down in the report and the other has the headers in the proper order. Their report options are exactly the same and I can't find where the configuration is different !
Does anyone have some idea ? Please ?
TestStand revision : 2010

To Norbert :
The steps in the body are ok, in the correct order yes.
I've attached two extract of report (check the Report Correct first), change the extention from ".txt" to ".html", the html one wasn't authorized by the forum.
To jiggawax
I'm not using XML format, only text or html. Where is located the ReportOptions.ini file ? I cannot find it with a basic search, could it be hidden ? As I am not managing this file in the configuration of the benches, it might be the origin of the problem !
Both benches are running the same client sequence indeed : the client sequence are located on a network reachable by the benches.
I doubt that one the client sequence can override a report callback but afterall I should make sure of this possibility.
Thanks for your help !
Attachments:
Report Correct.txt ‏12 KB
Report Upside down.txt ‏15 KB

When I open pages it scrolls through various numbers of blank pages with a line at the side, then stops at a document, but usually an old document. I have to go to "open recent" to get on the page I want.

Hi
When I open Pages it scrolls through numerouss blank pages with a line at the side 1st, then settles on an old saved pages document.I then have to go to "open recent" to select the one I want. Why?

No
It's the 1st version of Pages I've had on my computer.
Can't delete them as they scroll through them at a rapid pace. The longer I've had the problem the more blank pages it scrolls through.

How do i get a new tab to open up with my home page after i click on the + at the end of the tab

how do i get a new tab to open up with my home page after i click on the + at the end of the tab

problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

Present final report at the end of the form.

We are working on a performance evaluation form.
There´s a part of it where we specify performance factors, the qualification is from 1 to 5. If the qualification is between 1 & 2.9, it needs a developement plan.
I would need two things, first if the value entered is between 1 % 2.9, the background color to turn red. But at the end of the form get "a report" with all the performance factors that are between that qualification rate, so the evaluator makes a plan for it.
I´m using LiveCycle Designer ES 8.2
Hope to explain enough,
Thanks in advance!

Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

Blank Page at the end of the report

Similar Messages

Maybe you are looking for