Blank Page at the End

Dear All,
My requirement is to flow a table data onto subsequent pages without repeating the header portion of the form.
I created two master pages and two flowed subforms to do the same.
A default blank page with the heading is coming for 2 rows of data, or whenever the amount of data is less.
How should I solve this?
If is it to be done by scripting, please enclose the relevant code.
Thank you.
Regards,
Prosenjit.

The address field must not flow, yet the table should flow, how will that be possible, please explain.
Thank for your time.
I am trying to use the 'initialization' of subform 'Page2' as follows: xfa.form.data.Page2.presence = "hidden" within a IF-ENDIF construct, yet its not working out.
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Aug 30, 2009 6:14 PM

Similar Messages

Implementing multiple page size requirement - extra blank page at the end

My XMLP report requirement is as follows.
- The report is printing a bunch of lines.
- Based on data and layout requirement, lines are grouped into page where they belong (due to complex logic for determining which page a line should go to...this is done in PL/SQL package that is called in the beginning of the RDF trigger)
- The first page needs to be printed on Legal size paper
- Subsequent pages (IF NEEDED) need to be printed on Letter size paper
So some report will have a 1-page output (legal size), and some will have multiple pages (1st page should be legal size, subsequent on letter size).
Here is a sample XML data:
<REPORT>
<LIST_G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>1</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>2</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>3</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
</LIST_G_PAGE_NUMBER>
</REPORT>
For this, I created 2-pages RTF template and using the Word Page Setup feature:
1. First page setup is legal size (go to Page Setup, Paper tab, choose Letter and choose Apply to "Whole Document").
The first page has the following XMLP tag:
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER=1?><?call:body?><?end if?>
<?end for-each?>
<?template:body?>
for-each loop that prints lines in a tabular format
<?end template?>
2. Second page setup is letter size (go to Page Setup, Paper, choose Letter and choose Apply to "This point forward").
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER>1?><?call:body?><-- Ctrl-Break to insert a page break here --> <?end if?>
<?end for-each?>
It almost worked, except there is a blank page printed at the end. How do I remove the blank page? I have tried to use <?split-by-page-break:?> instead of the Ctrl-Break, but it did not seem to work (there is no page break happening at all).
I think the extra page is due to the multiple page nature of the RTF template. Is there a way to control the page size through XMLP tag (or XSL-FO). With that, I can try having a single page template and put the page size control within the XMLP / XSL-FO tag and hope that the extra blank page at the end will go away. Can someone please help?
Thank you!

Sorry for the typo in my previous post... I meant Ctrl-Enter (not Ctrl-Break).

How to avoid printing an additional blank page at the end of the report

I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
REP-0801: Layout canvas must remain large enough to fit all layout objects
Can anyone tell me how to handle this?

Hi,
I too faced similar prob.
But when i made the After Page Value property of the report as blank it removed the blank page for me .
Try this and let me know whether it has helped you.
Regards
Srinivas Pusa

Blank Page at the end of report(html output)

Hi,
I have created a paper layout report using report 10g.
DESFORMAT for the report is html.
when i take a print out of the report from internet explorer its printing a blank page at the end.
I tried with BLANKPAGES=NO it didn't help me and even unchecked the Blank Pages property in Report Builder tool.
Please help me in resolving this issue.
Regards
Srinivas.

Many thanks. That works

Problem with a blank page at the end.

Hi,
I have a report. That comes up with a blank page at the end of the report when the report generates the output in the report builder. Also in pdf file.
It was created by somebody earlier... and i need to fix this bug.
Any solutions..?
Thanks in advance.
KK
Message was edited by:
KK28

Hi
there are a number of hits on Metalink for this...
Subject:      Extra Page Shown At The End Of A Web Report
     Doc ID:      Note:172426.1      Type:      PROBLEM
     Last Revision Date:      04-JAN-2005      Status:      ARCHIVED
* fact: Oracle Reports Developer 6.0.5
* fact: Solaris Operating System (SPARC)
* fact: Microsoft Internet Explorer
* fact: Adobe Acrobat
* fact: OAS
* symptom: Extra Page Displayed At The End Of A Report Viewed on the Web
* symptom: Only happens on one report
* symptom: Using Times New Roman
* symptom: Client/Server configuration works successfully
* change: Report originally created for client/server application was moved to a web application without making any coding changes in the report.
* cause: Bug 1386820 : HTML GENERATED ON NT AND UNIX IS DIFFERENT. ADDITIONAL BLANK LINES ON UNIX
fix:
Use the Report Builder on Unix to make fine adjustments in the layout to
improve the HTML output.
-----x------------------
Subject:      How to set the number of rows per page dynamically in a report
     Doc ID:      Note:122714.1      Type:      SCRIPT
     Last Revision Date:      07-NOV-2000      Status:      PUBLISHED
PURPOSE
This article shows how to set the number of rows per page dynamically according
to the user parameter specified.
INSTRUCTIONS
Follow these steps:
1. In the Object Navigator under Data Model-->User Parameters, create an user
parameter P_1 -- this parameter specifies the number of rows you want to
print per page
datatype: number.
2. In the Data Model Editor, create the query and the layout according to your
requirements.
Let's assume that we have the following:
Q_1: Select empno, deptno ename from emp
order by deptno, ename
G_1 has the columns empno, deptno, ename
3. In the Data Model Editor, create the following summary columns:
CS_numrow will be numbering the rows within the detail group
(created within G_1).
Set the following parameters:
Name: CS_numrow
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
CS_total_rows will calculate the total of rows retrieved
(created at the report level)
Set the following parameters:
Name: CS_total_rows
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
4. In the Layout Model Editor, create a Group Frame M_1 within the repeating
frame, below the fields empno, deptno, and ename. You may have to stretch
the existing frames to be able to fit this in.
F_enmpno F_deptno F_ename
--------------------------------------------- <<<< create the group
frame here
5. Set the properties for the Group Frame M_1 as follows:
Print condition: First
Object: Enclosing Object
Sizing:
Vertical: variable
Horizontal: fixed
Check the box "Page Break before".
6. Create a Format trigger for this frame M_1 as follows:
function M_1FormatTrigger return boolean is
/* prints until a row number is product of P_1 */
/* if row number is 5 and P_1 = 5, MOD is 0 */
/* then it prints the frame, doing a page break */
begin
if :CS_total_rows <> :CS_numrow then -- avoiding blank page at the end
if mod(:CS_numrow,:P_1) = 0 then
return (TRUE);
else
return(false);
end if;
else
return (false);
end if;
end;
NOTE: This assumes that the report is tabular. If you have a break group, this
logic can be applied for the detail group.
REFERENCES
Information in this article was taken from Oracle Sample Code @ Repository
Entry #956. In order to request the binary (rdf file or .sql script), please
log a TAR via Metalink requesting Oracle Sample Code #956
CAUTION
The sample program in this article is provided for educational purposes only
and is NOT supported by Oracle Support Services. It has been tested
internally, however, and works as documented. We do not guarantee that it
will work for you, so be sure to test it in your environment before relying
on it.
-------x-------------
the list goes on...
Hope this helps

Blank Page at the end of generated PDF Document

Hi,
my problem is that ADS is generating a blank page at the end of my report.
I fill the ADS with a template and an XML stream.
The XML stream contains multiple orders. Each order has several detail data. It is a requirement that every order object has to appear at a new page.
XML structure:
- Order
-- Group1
--- fields of Group1
-- Group2
--- Fields of Group2
My template looks like this:
- body page subform: Order (Default binding: $record.Order[*]; Repeat Subform for Each Data Item: yes; After: Go To Next Page)
-- subform1
--- fields of subform1
-- subform2
--- fields of subform2
Because of the "Go To Next Page" at the Order subform a new page is rendered each time an order ends. This leads to the blank page after the last order is processed.
Does anyone know how I can suppress the blank page at the end of the document?

You may use a forum for xsl fo.

Blank Page at the end of the report

Hi
In my report i did not have any pagebreak or section break.
But some times i am getting extra blank page at the bottom of the report .
How to avoid this ..
Thanks in Advance
Have a Nice day.

Hi,
It is very probable that you are have unncessary space somewhere before the end of your template.
Use Ctrl+Shift+* to show the end of line markers and remove the unnecessary spaces in your
template then run again the view report.
cheers
Jorge
p.s If your question was answered then please grant the points and close the thread

Blank pages at the end of the report

Post Author: gayatrys
CA Forum: General
Hi
In a report we are having nealy 45 sections consisting of group headers and its sections like group header a,b etc. the issue is we have suppressed the section, by using formula in "suppress(no Drill Down)" but at the end of the report, a page header and footer is displayed for the suppressed detail and group footer sections.

Post Author: sharonmtowler
CA Forum: General
in the section expert select supress blank section on all sections
try to minimize the size of the section, the blank page is because it is extending beyond standard page size.

The report engine add a blank page at the end of report

I have configured a group with the option "New page after" checked. The problem of that seems the engine add a new blank page at final of report. Exists some way for avoid that? Perhaps is possible add a formula for don´t allow that when is in the last page?
Regards and many thanks for the help.

Many thanks. That works

Blank page at the end of smartform

Hi all,
I have designed a smartforms which contains a header window, main window and page no. My main window is having a command which gives page break for each customer . I am getting a extra page(having the logo and the company ) which is in the header window. at the end always .How to avoid this extra page.
Regards,
Priya

Hi Priya,
Try this logic!!!!
I hope you are triggering your command for every new customer. Have you also included in the condition that the variable value should not be initial.
I guess at the end of table, your work area doesnt have any value. But still the condition is passed as now the value is initial(which is not equal to previous value).
Hope you will be able to resolve the issue with this info.
Do appreciate if found helpful.
BR,
Vinit

Table every row in new pages leaves a blank page at the end.

Hi All,
I have a nested table in a output form.
All I have in this form is a nested table nothing else.
as per the requirement to have every new row in a new page, I set the after parameter to next page / next content area for the parent row pagination.
Now the result is if I have 5 rows, it creates 6 pages document where each row in each page and the last page is blank.
I understand that the after parameter is intended to move to next page immediately after publishing each row, but how can I stop it at the last instance. or how can I overcome this blank page issue.
If somebody has already gone through this, please share the solution with me.
Thanks in advance,
Sai

After a long and annoying series of attempts and consulting your links, nancy, there has been no change. The page breaks works in internet explorer and google chrome but when i go to print in safari there are all type of blank page scattered about. Please open up this link in safari, http://onlinedevelopments.com/backend/csrSafetyServices.php?
then go to print, and see the problem. I don't know what to do.
idC=1157&id=947&vW=c&aD=3&vP=L5sJWFYsMs

How to avoid printing a balnk page at the end in the Adobe form output

Hello Experts,
Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
I have a master page with header n footer and a body page seperate.
For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
"after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
Can someone guide me as how to solve this problem.
Any help is appreciated. Thanks in advance.
Regards,
Mahesh

hey mahesh,
this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to initial or space).
This can be handled by doing the following
By knowing the number of line items by the following stmt.
describe table itab lines v_lines.
Now you have the value in v_lines.
use a counter in ur form and keep it increasing it by 1 ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
this should be along with the condition which u have already put, ie when ever line item no changes
when both these conditions are satisfied , then only the new page will be triggered.
Hope it helps,
Reward if useful,
Regards,
KP.

Page Break-An extra blank page as the last page.

I have a template with a page break (<?split-by-page-break:?>) at the end of the template prior to the end of loop <?end for-each?>. This is causing an extra blank page at the end everytime the report is run. I checked this forum and got some pointers and used couple of them but didn't get the blank page to go!
I tried this in my page break filed! <?if:position()!=last()?><?split-by-page-break:?><?end if?>
Please help.
Thanks,
Fran

Hi, ive faced a similar problem in the past, I worked around it using subtemplates, but it still gives out an extra blank page if the content on the last page comes within 3 lines of the bottom of the page.. otherwise its ok..if you could send me your template and a sample xml file at domnic26ATgmail, i will see what i can do to help.
regards,
Domnic

Avoid Creating a Blank Page in the PDF Output for conditional request

Hello BI Masters
I have a Conditional request on my Last page of the data it checks the number of rows in the first page then it prints the excess rows in the last page and everything is working fine but when i use the conditional request its generating a blank page at the end of the report and i doant want to display balnk page
My Conditinal format is like this
<?if:number(SEC3_COUNT)>2?><?if:number(SEC4_COUNT)>2?>
<?if:number(SEC5_COUNT)>2?><?if:number(SEC6_COUNT)>8?>
<?initial-page-number:”1”?>
Form FDA 1572 – Statement of Investigator Continued
Protocol: <?SEC7_NAME?> <?SEC7_TITLE?>
Investigator(s): <?for-each:GET_SECTION_1_DETAILS_ROW?><?SEC1_FULL_NAME?><?end for-each?>
<?end if?><?end if?>
<?end if?><?end if?>
I dont want the Balnk Page to be Displayed , Please help me out
~Srix

Hi Everyone ,
I have faced the same problem,The first if condition may not effect ,If any if condition immidiately following the for loop then it will crates the problem.
-----------------May be your problem because of this---------------------------------
| <?FOR LOOP ?> <?IF CONDITION?><?END FOR EACH?>|
SOLUTION :<?FOR LOOP?><?IF @SECTION:CONDITION?>?>
<?END FOR EACH?>|

Is it possible to INSERT a blank page Between existing pages? Everytime I try it inserts the page at the END of the document.

Everytime I try it inserts the page at the END of the document. The HELP is no help, and I can't find any other documentation on being able to do this. Appreciate the feedback. Thanks! - ph

AP,
As Fruhulda notes, a Section Break is an Inline character that will move all text below it to the next page. With a combination of graphics and text, and with the graphics having the property of Object Causes Wrap turned on, you will get these apparently odd behaviors. This is why I often favor the Page Layout mode myself. As many experienced users will say, you can do anything in a WP doc that you can do in a PL doc, but in my opinion the WP features often get in the way of simple operation when graphics are involved.
Glad you are on track now.
Jerry

Blank Page at the End

Similar Messages

Maybe you are looking for