Blank page coming inbetween the output of the pdf

Hi Tim,
I am getting a blank page in between the data output of the pdf. For example I have a 10 pages output of the pack slip report in PDF so for the first 7 pages it is printing the header and line information printed correctly. But for 8th page only header information is printed(without line information) and 9th page only half part of the header (header is having 10 rows so only 5 rows ) are getting printed
Any help will really appriciated. This is in production now.
Thanks,
Ambadas

Hi Ravi,
Thanks, I tried removing all spaces but still it is giving this problem and this is not happening all the time but only for large report like more than 7-8 pages. Can you look at the template see if I am missing something.
Please let me know.
Thanks again.
Ambadas

Similar Messages

I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed

I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed

If you have an internet connection (e.g., Safari works) try here:
iOS: Troubleshooting applications purchased from the App Store

When I select a link and a pdf opens, when I close that document a blank page shows and I have to the click the "return" to get back to the original page

Example- I do a search and get a list of web sites, I select one which is a pdf document.
After closing that pdf a blank page appears instead of returning to the original page of search results.
Can I set up Firefox to automatically return to the original page?
Thank you

Is the PDF opening outside of Firefox in Adobe Reader, Adobe Acrobat, or another external application? Usually Firefox closes the blank window or tab immediately in that case. However, I have noticed that if the link was launched using the Ctrl or Shift key, or middle mouse button, then Firefox might leave it open. Have you noticed a pattern along these lines?

How to get the output of the Send Separate Remittance Advices in XML in R12

Hi All,
I have a requirement where we want the output of the standard report 'Send Separate Remittance Advices' to come in XML, currently its coming in PDF format.
Can you please help?
Thanks,
Dilip
Edited by: 990784 on Mar 12, 2013 2:57 PM

Refer these links
http://www.sap-img.com/bc037.htm
http://www.members.tripod.com/abap4/Save_Report_Output_to_a_PDF_File.html
CONVERT_ABAPSPOOLJOB_2_PDF FM convert abap spool output to PDF

Is it Possible to display the output of the ALV list as POP-UP

Hi Experts,
                 Is it Possible to display the output of the ALV list as POP-UP, if yes then provide some ideas on it.
thanking in advance,
Samad.

Hi samad, it is possible to display alv list as pop-up by using the FM " REUSE_ALV_POPUP_TO_SELECT"
try this sample code
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
      EXPORTING
   I_TITLE                       = P1_TITLE
       I_SELECTION                   = 'X'
       I_ZEBRA                       = 'X'
I_CHECKBOX_FIELDNAME          =
I_LINEMARK_FIELDNAME          =
I_SCROLL_TO_SEL_LINE          = 'X'
        I_TABNAME                     = 'T_VBAP'
       I_STRUCTURE_NAME              = 'T_VBAP'
       IT_FIELDCAT                   = T_FCAT2
       I_CALLBACK_PROGRAM            = 'ZTEST_ALV_POPUP'
   IMPORTING
       ES_SELFIELD                   = I_SELFIELD
       E_EXIT                        = W_EXIT
      TABLES
        T_OUTTAB                      = T_VBAP.
i think it will solve your problem
Regards,
Vijay

To get the output in the chart for a single selection

Hi all,
I used a query to get the output of the table, and for the same query i have created a view to get the result in the chart.
to get the output of the table for a particular region i have created an input field and added value help to it. When i selected one particular region, i will be getting the data, in the table. But when i select a particular row in the table i need to get the data of that particular row only in the chart. (which i am getting)
But when i select multiple regions at a time, then i am facing the issue. I get result of multiple regions data(at a time two rows are displayed in the chart) in the chart. where in i want to get data only for one region (only one row needs to get selected at a time) to get the result.
Can any one throw a light of what needs to be done here.
Thanks,
Rani

Hi Rani,
I am not sure if I understand your question exactly, but it sounds like you need to set the selection mode for your table to "Single". If you do that the user will only have the possibility of selecting one row at a time in the table; they will not be able to select multiple rows.
You make that setting in the Configure Element panel for the table.
I hope this suggestions helps.
Margaret

How to send the output of the 1st BPEL process as a input to 2nd BPEL Proce

Hi,
I am working on OBPM 11G and my requirement is like below,
From Mediator we need to call two different BPEL process. 1st one is Synchronous one and second one will be a one way interface. We need to call a java call out from Mediator and then give the output to the first BPEL process. The output from the first BPEL process has to be given to the second BPEL process with a filter condition.
However we have achieved to call Java callout as well as call to two different BPEL process but facing issues in sending the output of the first BPEL process as a part of input to the second BPEL process.
Any help on this would be appreciated.
Bibhu

Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer

Make the output of the BI report rtf file some fields non editable

Hello All,
I want to make some fields in the output of the BI report as editable and some non editable. Any output format is fine (PDF, RTF or HTML) Please let me know if anyone knows how to do it.
Thanks in advance..
Anu

You can add RTF to active allowed output type list (provided that your reporting system supports it) by going to CustomerReportExtensions.xml file and adding the following node right after ParameterTypes node:
<ActiveReportOutputTypes configChildKey="key">
<ActiveReportOutputType key="RTF" value="RTF" extension=".rtf"/>
</ActiveReportOutputTypes>

How to hide the specified rows in the output of the report?

Hello all,
    I have a requirement where i have to hide some of the lines (<b>initial 6 lines</b> that is <b>6 rows</b>) in the output of the report.
How would I go about doing this?
Thanks for you time.

Hello Sai,
I believe this is query output ( e.g., )
Country   Sales
India        $100
USA        $200
Germany $300
You want to hide the line Germany $300
Case 1:
    If you can change the query, Filter on Country and exclude Germany
Case 2:
    If you can not change the query, use url appending and filter out Germany
Check webapi reference for the exact commands
Case 3:
    Only if you are using the NW2004s front-end, Report designer will be available for you. In this, you can delete the rows that you do not want and publish in web.
Case 1 and 2 solutions are available in older versions of front-end as well.
Regards,
Sheik Bilal

I have s mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed

I have a mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed, so it does not default to interabnl speaker
Is there a way to force the system to change to DVI output?????
thanks a lot

Hi there,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W.

Selection-screen in the output of the program

Hi,
I want to print the selection criteria ( or Values ) in the output of the program on the RIGHT HAND SIDE OF THE HEADER. I am doing code through ALV and I want to include the respective code in 'TOP_OF_PAGE'
If there are no values in the selection screen fields, then I DO NOT Print them. Start the values with the texts, such as 'Material', 'Plant', 'MRP Controller' etc. For single values, print the values separated by commas, For a range of values, print the values separated by '-', For the exclusion of single values, print 'EX' before the values.
Thanks in Advance.

To get the parameter list, use [RS_REFRESH_FROM_SELECTOPTIONS|https://forums.sdn.sap.com/search.jspa?objID=c42&q=RS_REFRESH_FROM_SELECTOPTIONS], the rest is basic Abap.
Regards,
Raymond

How to get the output of the report in pdf format

how to get the output of the report in pdf format?
Thanks in advance,
madan.

Refer these links
http://www.sap-img.com/bc037.htm
http://www.members.tripod.com/abap4/Save_Report_Output_to_a_PDF_File.html
CONVERT_ABAPSPOOLJOB_2_PDF FM convert abap spool output to PDF

Problem displaying the output in the same view

hi Gurus,
I have developed an web dynrpo application and have three views, in the first view I am having an input field from which I am calling a BAPI by giving that input field value as input to the BAPI.
Now is it possible to display the output also retrived from the BAPI on the same view.
Thanks and regards
kris

hi LM,
Thanks for your fast response.
I think I was not clear in explaining my problem.
I have a view in which I have an input field which is the input to the BAPI, now on entering the value in the input field I have a submit button, on clicking the BAPI should be executed and also the the output should be displayed on the same view.
Now regarding the mapping both the input and output are in the same context, would that a problem.
And also after getting the output from the BAPI I have to do some validations based on the output from the BAPI and get some message printed on the view.
Please help me in this issue.
Thanks and regards
kris

I want to add hyperlink in the illustrator file and want the output in the PDF

I want to add hyperlinks in the illustrator file and want the output in the PDF.
I tried to add the multiple hyperlinks on the text and images in the illustrator by using the attribute panel but the links are not working in the published PDF.
Is there is any other method to create a hyperlink in the illustrator?
Can anybody help me out in this
Thanks

Interesting, Carlos.
There's another method by JET: Re: hyperlinks in Ai

LabVIEW 6.1 If For Loop count terminal is zero then value going through the loop is not passed on to the output of the loop

Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
Gabsi

Hi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi

Blank page coming inbetween the output of the pdf

Similar Messages

Maybe you are looking for