Blank Page in the middle of report

We are having a problem withour invoice report. The problem is that a blank page will print with no data on it.
The page is not completely blank. It has only page header and page footer
There is not always a blank page. It occurs only when the detail sections and various
footer sections print just far enough down toward the bottom of the page.
Does anyone have any ideas?
Thanks
Kalai

I have 3 sub reports at the group footer and supressd subreport if it is blank.
Also I have supressd group footer if it is blank.
Like
GF(Section1)-----SubReport1
GF(Section2)-----SubReport2
GF(Section3)-----SubReport3
It looks like the GF is occuping space even all the subreport are supressed when it is blank .
When I removed the entire GF I am not getting any blank page.
Thanks
Kalai

Similar Messages

Blank Page at the end of report(html output)

Hi,
I have created a paper layout report using report 10g.
DESFORMAT for the report is html.
when i take a print out of the report from internet explorer its printing a blank page at the end.
I tried with BLANKPAGES=NO it didn't help me and even unchecked the Blank Pages property in Report Builder tool.
Please help me in resolving this issue.
Regards
Srinivas.

Many thanks. That works

The report engine add a blank page at the end of report

I have configured a group with the option "New page after" checked. The problem of that seems the engine add a new blank page at final of report. Exists some way for avoid that? Perhaps is possible add a formula for don´t allow that when is in the last page?
Regards and many thanks for the help.

Many thanks. That works

Is it possible to insert (or add) a blank page into the middle of an existing chapter of a book created with iBooks Author?

I have one LONG chapter in my book and feel is necessary to make some edits that include additional pages within the chapter itself. But when I INSERT a page or press the +Page prompt as I have my chapter open to the place I wish to insert a page, the new page appears only at the END of the chapter and not at the point within the chapter that I would want the new blank page to appear. What gives? Another under developed software bug, or....?
Anyone else have the same issue and has been able to overcome it?

A new page is always dropped at the end. The only option I have found is simply to copy and paste everything down one - or as you want to adapt it. I assume its not a text only book or the text would flow and add pages as required.
Its not a bug or under developed.... its the Apple Way

Is there any way to insert a blank page in the middle of a document (rather than at the end)?

I can do this in Word, but not Pages. I'm using Pages '09 Version 4.1. Any help would be appreciated.
Thank-you!

You can also click at the end of a section and insert a new section from the Sections link on the toolbar.
Basic rule is if you are clicked in the text, then the new section will go after the current section.
If you are not clicked in the text then the new section will be at the end of the document.
A section obviously does not fit inside an existing section.
Peter

How to avoid blank page in the report?

adding a field in the grouping and checking the page break option means then we are getting blank page as the first page of the report? How to avoid this blank page?

Usually blank pages appear as first page due to the presence of filler lines (//////) on top of report header.Please ensure that the top header is exactely started from top of page itself.

Blank page at the beginning of the report

I have a Report with a Group Above. I wanted a new page when a new Group began, so I selected the Group and changed Page Break Before to yes. It did start a new page with each Group, BUT there is now a blank page at the beginning of the report. How do I get rid of the blank page?
Thanks, Wayne

Hi Wayne,
I don't know whether the solution provided by Jrg works for you or not. But I solved the problem in a different way.
Insted using a page break on a repeating frame, I placed a boilerplate item in a corner just below the frame with a " "(white space) and I set the boilerplace item's property "Page Break After/Before" to "Yes". You understand me? just cheating ;)
That worked for me.
Cheers,
Gouri Sankar

How to avoid printing an additional blank page at the end of the report

I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
REP-0801: Layout canvas must remain large enough to fit all layout objects
Can anyone tell me how to handle this?

Hi,
I too faced similar prob.
But when i made the After Page Value property of the report as blank it removed the blank page for me .
Try this and let me know whether it has helped you.
Regards
Srinivas Pusa

Blank Page at the end of the report

Hi
In my report i did not have any pagebreak or section break.
But some times i am getting extra blank page at the bottom of the report .
How to avoid this ..
Thanks in Advance
Have a Nice day.

Hi,
It is very probable that you are have unncessary space somewhere before the end of your template.
Use Ctrl+Shift+* to show the end of line markers and remove the unnecessary spaces in your
template then run again the view report.
cheers
Jorge
p.s If your question was answered then please grant the points and close the thread

When I open safari, I get a blank page and the beach ball.

When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How to get blank records at the start of report output for label sheet?

Hello -
What is the best way to get an arbitrary # of blank records at the start of report output?
I am writing a report that will be printed out on label sheets -- some of which might already be used. For example, there might be 3 labels per page but the first 2 have been used the last time the report was run.. so the report needs to display 2 blank records first so that the first record that gets printed on a label is in the 3rd position on the page. (the user would indicate - through a parameter - what the starting postion would be)

Hi Scott
Create a user parameter that reads in the number of blanks you need to 'print' before starting the actual printing.
In the Format trigger of the outermost frame of your report write code using SRW.SET_BEFORE_PRINTING_CODE.
Loop this method based on the user parameter and call this method with skip-line-command of your printer as its argument.
Regards
Sripathy

Implementing multiple page size requirement - extra blank page at the end

My XMLP report requirement is as follows.
- The report is printing a bunch of lines.
- Based on data and layout requirement, lines are grouped into page where they belong (due to complex logic for determining which page a line should go to...this is done in PL/SQL package that is called in the beginning of the RDF trigger)
- The first page needs to be printed on Legal size paper
- Subsequent pages (IF NEEDED) need to be printed on Letter size paper
So some report will have a 1-page output (legal size), and some will have multiple pages (1st page should be legal size, subsequent on letter size).
Here is a sample XML data:
<REPORT>
<LIST_G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>1</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>2</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>3</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
</LIST_G_PAGE_NUMBER>
</REPORT>
For this, I created 2-pages RTF template and using the Word Page Setup feature:
1. First page setup is legal size (go to Page Setup, Paper tab, choose Letter and choose Apply to "Whole Document").
The first page has the following XMLP tag:
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER=1?><?call:body?><?end if?>
<?end for-each?>
<?template:body?>
for-each loop that prints lines in a tabular format
<?end template?>
2. Second page setup is letter size (go to Page Setup, Paper, choose Letter and choose Apply to "This point forward").
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER>1?><?call:body?><-- Ctrl-Break to insert a page break here --> <?end if?>
<?end for-each?>
It almost worked, except there is a blank page printed at the end. How do I remove the blank page? I have tried to use <?split-by-page-break:?> instead of the Ctrl-Break, but it did not seem to work (there is no page break happening at all).
I think the extra page is due to the multiple page nature of the RTF template. Is there a way to control the page size through XMLP tag (or XSL-FO). With that, I can try having a single page template and put the page size control within the XMLP / XSL-FO tag and hope that the extra blank page at the end will go away. Can someone please help?
Thank you!

Sorry for the typo in my previous post... I meant Ctrl-Enter (not Ctrl-Break).

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)??? -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
-And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

Can't add new page in the middle of document

I am creating a manual and inserted page breaks at the end of each page as I created the document. Now I am trying to add a new page to the middle by inserting page breaks and even section breaks, but every time I try to add it in, it just goes to the bottom of the document and I am unable to move anything into the original 50 pages. Any tips here?
When I look at the thumbnail view of the document it has all 50 pages in one yellow box instead of one page individually. A bit odd.

The thumbnail browser shows one small page thumbnail for each page of your document. Each yellow bounding box indicates a section. So the thumbnail browser indicates your document has a single section with 50 pages in it.
As you've typed your document it has naturally flowed from one page to the next. If you place a page break at the end of the page you are simply mandating what Pages has already voluntarily done. But if you insert a second page break you should get a new blank page. In other words, if you put your cursor at the bottom of page 6 and insert a page break you will move to the top of page 7 which has text because it is still page 7. Insert another page break and page 7 becomes page 8 and you'll have a blank page 7.
Note: if you move your cursor into the middle of the document and insert a section break you'll see that the thumbnail browser shows two sections; one ending on the page above your cursor and one starting on the page your cursor is in. This is useful to understand.
Second Note: if you use the Insert>Sections option it always inserts a new section at the bottom of the section your cursor occupies. Since your document currently has one section, that's why you wind up with the inserted page at the end of your document.

Problem with a blank page at the end.

Hi,
I have a report. That comes up with a blank page at the end of the report when the report generates the output in the report builder. Also in pdf file.
It was created by somebody earlier... and i need to fix this bug.
Any solutions..?
Thanks in advance.
KK
Message was edited by:
KK28

Hi
there are a number of hits on Metalink for this...
Subject:      Extra Page Shown At The End Of A Web Report
     Doc ID:      Note:172426.1      Type:      PROBLEM
     Last Revision Date:      04-JAN-2005      Status:      ARCHIVED
* fact: Oracle Reports Developer 6.0.5
* fact: Solaris Operating System (SPARC)
* fact: Microsoft Internet Explorer
* fact: Adobe Acrobat
* fact: OAS
* symptom: Extra Page Displayed At The End Of A Report Viewed on the Web
* symptom: Only happens on one report
* symptom: Using Times New Roman
* symptom: Client/Server configuration works successfully
* change: Report originally created for client/server application was moved to a web application without making any coding changes in the report.
* cause: Bug 1386820 : HTML GENERATED ON NT AND UNIX IS DIFFERENT. ADDITIONAL BLANK LINES ON UNIX
fix:
Use the Report Builder on Unix to make fine adjustments in the layout to
improve the HTML output.
-----x------------------
Subject:      How to set the number of rows per page dynamically in a report
     Doc ID:      Note:122714.1      Type:      SCRIPT
     Last Revision Date:      07-NOV-2000      Status:      PUBLISHED
PURPOSE
This article shows how to set the number of rows per page dynamically according
to the user parameter specified.
INSTRUCTIONS
Follow these steps:
1. In the Object Navigator under Data Model-->User Parameters, create an user
parameter P_1 -- this parameter specifies the number of rows you want to
print per page
datatype: number.
2. In the Data Model Editor, create the query and the layout according to your
requirements.
Let's assume that we have the following:
Q_1: Select empno, deptno ename from emp
order by deptno, ename
G_1 has the columns empno, deptno, ename
3. In the Data Model Editor, create the following summary columns:
CS_numrow will be numbering the rows within the detail group
(created within G_1).
Set the following parameters:
Name: CS_numrow
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
CS_total_rows will calculate the total of rows retrieved
(created at the report level)
Set the following parameters:
Name: CS_total_rows
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
4. In the Layout Model Editor, create a Group Frame M_1 within the repeating
frame, below the fields empno, deptno, and ename. You may have to stretch
the existing frames to be able to fit this in.
F_enmpno F_deptno F_ename
--------------------------------------------- <<<< create the group
frame here
5. Set the properties for the Group Frame M_1 as follows:
Print condition: First
Object: Enclosing Object
Sizing:
Vertical: variable
Horizontal: fixed
Check the box "Page Break before".
6. Create a Format trigger for this frame M_1 as follows:
function M_1FormatTrigger return boolean is
/* prints until a row number is product of P_1 */
/* if row number is 5 and P_1 = 5, MOD is 0 */
/* then it prints the frame, doing a page break */
begin
if :CS_total_rows <> :CS_numrow then -- avoiding blank page at the end
if mod(:CS_numrow,:P_1) = 0 then
return (TRUE);
else
return(false);
end if;
else
return (false);
end if;
end;
NOTE: This assumes that the report is tabular. If you have a break group, this
logic can be applied for the detail group.
REFERENCES
Information in this article was taken from Oracle Sample Code @ Repository
Entry #956. In order to request the binary (rdf file or .sql script), please
log a TAR via Metalink requesting Oracle Sample Code #956
CAUTION
The sample program in this article is provided for educational purposes only
and is NOT supported by Oracle Support Services. It has been tested
internally, however, and works as documented. We do not guarantee that it
will work for you, so be sure to test it in your environment before relying
on it.
-------x-------------
the list goes on...
Hope this helps

Blank Page in the middle of report

Similar Messages

Maybe you are looking for