Blank page on browser and no error message on WL console
When Weblogic starts, everything seems ok, but after severial minutes running,
while browser requesting a web page, it stops on a blank page, and the Weblogic
console does not shows any error message, then, Weblogic will never response,
until restarted. What's wrong with it?
we use Weblogic 6.1, system based on structs and ejb
I'd suggest taking a thread dump of the server and posting it here.
-- Rob
muziq wrote:
When Weblogic starts, everything seems ok, but after severial minutes running,
while browser requesting a web page, it stops on a blank page, and the Weblogic
console does not shows any error message, then, Weblogic will never response,
until restarted. What's wrong with it?
we use Weblogic 6.1, system based on structs and ejb
Similar Messages
-
I signed into yahoo mail okay. what happens is after I open my mail the past two days all of a sudden the page would get fuzzy and I couldn't read anything or it would turn white. This never happened before and I looked at the top of the browser and it said mozilla firefox is unresponsive. I tried signing out and nothing worked. I tried minimizing the page and closing it manually and it would not let me. I tried deleting cookies and what happened it that the temporary files kept deleting for about five minutes. it was very upsetting. I have no idea what is causing this. Even when I went to control panel-internet options-delete cookies it sometimes went unresponsive. that's a first. any advise is helpful
Firefox keeps its own temporary files and cookies, separate from the ones stored by IE which you can manage through the Windows menu. If you haven't already done the following, please give it a try:
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove your yahoo.com cookies (save any pending work first) using either of these:
* While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help at all?
When Yahoo goes blank or fuzzy moving to a different task, it may be doing some kind of animated transition. Have you noticed any graphics or font rendering anomalies?
Try disabling Firefox's hardware acceleration of graphics. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
If you restart Firefox, is the issue improved? -
I am downloading the premiere elements 12 file on the adobe page and my error message says the file archive is missing??
you need the 7z file in addition to the exe
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
How to validate VO result and display error message?
Hi,
I have created 2 pages:
Page 1: User to enter employee number and click 'Go' button to search (redirect to Page 2)
Page 2: To display employee details
In situation where employee is suspended, employee detail will be display as blank in Page 2.
At the same time, we would like to display error message which inform user to refer to HR Department for this scenario.
Need guidance on how to perform the validation and display error message.
Thanks and Regards,
Shiau ChinHi Shiau,
In this case instead of redirecting to next page, throw an exception on the same page.
If you want redirect it to next page then while redirecting it to next page pass some info that can indicate that employee is suspended, get this value in Process request if it has value then throw exception else query details.
Regards,
Reetesh Sharma -
Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here... I have an iphone 4S and I did the last update. Now I am in trouble.
1. When I move the "sound on/off" button, I get it buzzing 10 times before the setting is changed and I can do anything else, just not reacting to the round button on screen touches.
2. Impossible to copy text from most websites into notes.
3. Impossible to delete an email account in settings.
4. Uses up the battery twice as fast as before. I have "update apps" setting turned off, just reading a couple of mails, making a couple of photos and open maps apps twice a day, and the battery is dead well before the evening.
5. Got extremely slow, and it was getting slower and slower with every system update.
I'm sure I forgot something... But well, that already a lot.Well, actually number 3 in my list is not true any more, I just tried to delete my account 15 times, then I've written my post, then half an hour later my Settings finally updated my accounts list. Whohoo
I did not try restoring it yet, thank you for the link! -
New Hard Disc Drive for HP Pavilion dv6 because of 303 and 305 error messages
Hello
My laptop was getting slower and slower so I did a default restore via the recovery partition and when it rebooted to start the reformat and reinstall to factory condition I got a message on the screen telling me to run the hard disc drive test. Did this and got the 303 and 305 error messages. The restore to default setting worked however after doing research in the error codes I realise I'm up for a new hard disc drive.
My laptop is a HP Pavilion dvd6-3203TU with WIndows 7 Home Premium installed. It currently has a 320GB TOSHIBA MK3265GSXX hard disc drive in it.
After reading through the forums I'm happy to find that my Recovery Discs will reinstall everything to a new hard drive and partition it into a C: drive and also the recovery partition. The main question I have is does my new hard drive have to be 320GB in size like the original or can I buy something like a 500GB+ drive for the laptop. If I have to replace the hard drive I may as will increase the size while at it, if possible that is.
Also does it have to be a Toshiba or can I buy a different brand?
Looking forward to some help in regards to this so thank you in advance also
This question was solved.
View Solution.Hi,
Your notebook is listed as coming with a 320Gb Hard Drive, but you can just as easily install a 500Gb or 750Gb HDD if you want more space - the drives on the following links are examples that would be fine for your notebook - you're in no way restricted to a particular manufacturer.
500Gb Hard Drive
750Gb Hard Drive.
The procedure to replace the Hard Drive starts on Page 65 of your Maintenance & Service Guide.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Hi
My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
I have updated the latest OS 6.0 in my i-pod touch.
Kindly send the solution
Regards
Deepak
<Email Edited By Host>Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also, you are not addressing Apple here. We are all just users like yourself. -
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??
If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.
-
I keep getting 'Please connect to the internet and retry' error message.
I've signed out of creative cloud on my Macbook Pro in order to use my log in details on another Mac (rented for an onsite edit abroad), I now want to return to using creative cloud on my Macbook but I'm having issues signing back in. I keep getting the 'Please connect to the internet and retry' error message even though my network is working fine, I have tried connecting on my home wifi and the network at my office. Does anyone know how I can sign in and use my Adobe apps?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I can't access my home page. I get an error message
When I loaded Firefox beta this time I couldn't open my home page. This was the error message:
Sorry, we're temporarily unable to access your page.
Please refresh this page to try again.
If you continue to have an issue, please clear your cookies .
Host Name: p399.my.re1.yahoo.com
Yahoo! ID: amike401
Error Type: (UDB:1)
Date/Time: Thu, 17 Feb 11 15:22:37 -0800Never Mind. I kept fiddling and I think I have it fixed.
Mike -
Configured Mail in 10.4.11 to iCloud specifications and get error messages
Configured Mail in 10.4.11 to iCloud specifications and get error messages and still cannot send and receive. Get error messages, "does not recognize password" etc. Have working on Snow Leopard, iPhone iPad but not 10.4.11 PPC Mail. Any help? I used Apple support set up. I originally had a .mac account and have tried both [email protected] and xxx.me.com as username. I Upgraded my password to stronger suggested strength. (one cap and one letter minimum 8) I verified Keychain. I have even deleted everything including Keychain and account and started over numerous times, still no joy. Ports are incoming 993 and outgoing 587. Will not be upgrading this machine due to production software issues but was told I could stll use the .mac email
Any help here?
-ThanksGive the date there is another probable solution. Were you originally a MobileMe subscriber? If you weren't, then please ignore the rest of this post.
MobileMe subscribers who migrated to iCloud received complimentary extra storage up until September 30 2013. This has now expired. If you have less than 5GB data in iCloud then your storage simply reverts to 5GB.
However if you have more than 5GB data, Backup, Documents and Mail will stop working until you either delete sufficient data to bring you within 5GB or purchase additional storage. Possibly this is what has happened to your - you should have been sent an email about this.
For instructions on purchasing additional storage please see
http://support.apple.com/kb/HT4874
For help in reducing your iCloud data please see
http://support.apple.com/kb/HT4847
Your problem is that you cannot access iCloud to do this because you have no iCloud preference pane. Your only options are to use a compliant Mac (Lion or Mountain Lion) or an iOS5/6 device to purchase extra storage; or to go to http://icloud.com and delete as much as you can there (you may not be able to access this page on Tiger, but you would be able to do so from any more recent computer). -
Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook. When I do this nothing happens. Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine. Any ideas what I'm doing wrong? Do I need to enable something on the Macbook?
An update...
I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
So -- anyone get through this connection problem and have any ideas to share??
iMac Mac OS X (10.4.7) -
I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?
Solving MSVCR80 issue and Windows iTunes install issues.
-
Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?
Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086
Maybe you are looking for
-
Optimum size for a full browser width image?
Hi all, I'm pretty new to Muse and these forums (hello everyone!) and have been tinkering around with some features. I'm currently creating a website for my band that integrate a full width browser image at the top of each page. I was wondering what
-
OS 10.6.5 corrupts DVD Studio Pro!!!!!!!! - Why didn't Apple tell us
OS 10.6.5 corrupts DVD Studio Pro. Upgrade to 10.6.5 and you will mess up the drop zones in a number of the templates, in addition to other problems. It's a shame that Apple did not thoroughly test this update in advance. If they did, they would have
-
SIMS 2 COLLECTION - BROKEN FILE
Hi! Yesterday I purchased "The Sims 2: Super Collection" for $30. I did read the comments and a lot of them said that they could not get the game to work. I decided to buy it though - and when it was finished downloading and I could play - I got the
-
Hi all I'm trying to load figures wherever the <figcap/> tag available. it works fine. but I create a textFrame for figure caption and use placeXML() to move the <figcap/>. It works only first occurrence and next throws an error as below. " Error: In
-
I've been doing occasional video editing on my MacBook C2duo with FC Studio 1 (FCP 5) and it's coped pretty well - managed to do a multi-cam edit fine. Pondering the upgrade to Studio 2 and I note it says in the system requirements 'not compatible wi