Blank Page, Really Stuck, Please Help
Hi all,
I've got a Report that I'm running from a client application to a job server that produces a Crystal Report. When I run this report against a local server on my machine the report completes without issue but when I run it against a different server on a different machine the report displays 3 blank pages in the middle of the data. I'm using the same database, same data, same report file. This occurs ONLY when running this report against the remote server and is unconcerned with any of the above listed conditions.
-I'm using Crystal Reports 11.5
Visual Studio 2008
-My local machine is 32 bit win7, the remote server is 32 Windows Server 2008.
If anyone could give me a hand at all I would be EXTREMELY gracious.
Thanks,
Ryan
Hey guys, thanks a ton for the responses.
I think I'm getting close. It has something to do with "Keep Together" either on the columns in a crosstab or on a couple sections within the report.
What's really still blowing my mind here is how it's different on the 64 bit machine. The client application is previewing the reports in adobe reader so I don't think the print drivers should be relevant. I did go ahead and update to Adobe Reader 10 on both machines and it had no effect but playing with these "keep together" settings seems to work .
I'll check back with final results later.
Thanks again,
Ryan
Similar Messages
-
whenever i open any tab on the app store such as games or entertainment or travel its starts loading and all i see is a blank page...Please HELP!!!
Try updating to iTunes 10.4.1 -> http://www.apple.com/itunes/download/
If that doesn't work, try resetting Winsock. It looks like that worked for quite a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer. -
My computer kept freeze up daily with OS X Yosemite installed a while ago, and I followed the other instruction to do "OS X" Recovery to: (1) erased my start up disk (2) Reinstalling Mac OS X Yosemite.
While about 18 or 20 minutes remaining from the installation, it went back to 2 hours 57 minutes but stuck there. I let my computer run over night but it was still at 2 hours 57 minutes. so I cancelled the installation which seemed to be the only choice.
I tried again today, erased my start up disk and reinstalled again, same situation happened again, when the remaining time said around 20 minutes, it went back to 2 hours 56 minutes and stuck there. I cancelled it again.
I read some other instructions in this community and did a hard shutdown and restarted while hold down the command key + R key. it took me to the disk manager screen and the only choice I had was the OS X Lion version.
I tried to install the OS X Lion, it said that will take 3 hours or so, after 20 minutes, a screen came up and said I need to turn off the computer by press the power button down then turn the computer on again. And I did. When I turn on the computer again, with Comand + R key pressed, I had to wait for an
internet recovery before I went back to the disk manager and trying to reinstall the OS X system. It kept coming back to ask me to turn the power off…
what can I do? Please help,
MacBook AirBoot back into the Recovery Partition. Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
X Yosemite Installation Stuck with Minutes Remaining? -
My recipients only get a blank page. I show file sent. This is with Adobe Send. Adobe Send Now had no problem.
I'm sorry to hear that you're having a problem with sending your files through Adobe Send. Can you provide more details?
What type of file are you sending?
When you download the file yourself, is it blank?
Are all recipients having the same problem?
Do the recipients get a Preview of the file?
Are they seeing the blank document as a Preview as well as after downloading?
Would it be possible for you to send the file to me through Adobe Send? I will provide you with my email address in a Private Message. -
I apologize for re posting this, but im trying to get some new help for my problem. I have created a logo in CS4 years ago, i need to work on it in CS6.
You can see the problem here:
http://www.bellwoodbnb.ca/1.html
When i open:
http://www.bellwoodbnb.ca/1.ai
It opens correctly in CS6,
when i copy and paste it into a new CS6 Ai file, it pastes as a faded version as seen here:
http://www.bellwoodbnb.ca/2.ai
We have checked to make sure all of the settings i can find are identical, we have replaces the CS6 pantones with legacy pantones and it did nothing. We know it opens, copy and pastes correctly in CS4 & CS5. But when copy/pasting or placing in CS6 it fades out for some reason.
Any help would be appreciated.
Thank you in advance!There's a redirect on the site which removed the "1.ai" portion. But you can put it back in and get the download. I posted too quickly.
The reason things are different....
Pantone color builds
When you open the previous file you open the file with their existing Pantone CMYK color builds. When you paste the file, you paste and get the new Pantone LAB builds in CS6.
Illustrator CS6 Pantone+ libraries do not contain CMYK color builds. The LAB builds are not as vibrant as the CMYK builds. Pantone states this is to "better represent colors on screen". Although I'm not a fan of this.
You can read more about it here:
http://helpx.adobe.com/illustrator/kb/pantone-plus.html
If working for print, the differnce in screen representation is not really something which is supposed to matter. After all Pantone 297U is Pantone 297U on press. I find the visual differnce pretty disconcerting and always revert to previous Pantone color books.
Viewing the other thread... I don't know what more you expect to learn. Monika gave you sound advice there. -
I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed
If you have an internet connection (e.g., Safari works) try here:
iOS: Troubleshooting applications purchased from the App Store -
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Library disappeared - I'm stuck - please help
We just moved so I unplugged my computer. I backed up files onto a portable hard drive.
After hooking up my computer at my new place, my itunes library is blank. I see 2 choices, but I'm afraid to press any buttons and wipe out the songs which are stored on my ipod.
1) Automatically sync songs to my ipod. It says it syncs ipod to mirror music library (which is blank) so I don't think I want that one.
2) Follow the new computer instructions - Drag itunes folder to itunes window?? Where is the itunes window? I've copied the files a few times (from external hard drive into itunes as well as file stored under my documents/my music (where I can see the songs I've purchased.)
I'm just stuck and worried I'll lose all the songs I've paid for. Can someone please help me?
Thanks!
Dianne*After hooking up my computer at my new place, my itunes library is blank*
In addition to your back-up, are all your songs still in the usual folder(s) on your computer? Try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file
*but I'm afraid to press any buttons and wipe out the songs which are stored on my ipod.*
If your iPod is set to update automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7.3 or later installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes - Keyboard Shortcuts for Windows
When your iPod appears in the iTunes source list change the update setting to manual, that way you can continue to use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. There are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
If you have any iTunes Music Store purchases the transfer of purchased content only from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. -
Newbie Stuck, please help!
hello all.
i'm really stuck. the website i'm working on used to have a
.htaccess in each admin folder, but now that it's been moved off
apache to tomcat, this isn't working at all, and about 20 admin
areas are now completely open and not password protected. I'm
completely new to coldfusion and from a php background. I was
hoping someone might know a way to protect the content of these
folders quickly and easily with coldfusion. I've read that there
are proprietry functions within CFML for login, roles, logout and
session management but I'm not getting anywhere with it. Has
anybody got a little bit of simple code that could help me out?? I
would be so, so, so grateful...
Thanks,
AlexPut a test for a SESSION variable created when a user logs in
(such as SESSION.isLoggedIn) into the Application.cfm of the
directories to be protected. If the SESSION variable is not
detected, redirect them to as login page above the protected
directoies. -
i tried to install the latest update on my ipad. i get an image which says I tunes with a cord to plug in. it is on a black background.. it has been like this for three hours now. if i turn it off and then on again that is the only page that appears. i am stuck. please can anyone help me? thanks.
It's too bad you lost stuff. I would recommend that you back stuff up before the next one. For example, iOS8 will be out sometime this fall. Just in case you experience the same thing again, do a backup before you do the update.
-
i have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page??
I do not know the log in details and no longer have that icloud email address !!
please help :-(That's Activation Lock. You will need to remember the Apple ID and password you used to set up the phone.
If you can't remember them, you can go to iforgot.apple.com to try to recover the information.
If you are the original owner of the phone & have proof of purchase, you can try calling Apple to see if they can assist also.
~Lyssa -
Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.
Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.
-
Time Machine backup gets stuck - Please help
Hi all,
I'm backing up my MBP via ethernet to a Time Capsule. The incremental backups take forever and are driving me nuts. The backups seem to be getting stuck midway. The disk sounds like it's spinning but the progress bar doesn't move. Also, it seems to be copying over too many files every hour, like >60000 or so (log below). I doubt that so many files get modified every hour.
I've tried everything (I could think of and find on the discussion boards) like deleting the sparsebundle, deleting the entire backup drive, playing with the backup frequency, nothing works.
Please help!!
Thanks,
DB
11/27/08 10:02:57 PM /System/Library/CoreServices/backupd[7045] Starting standard backup
11/27/08 10:02:57 PM /System/Library/CoreServices/backupd[7045] Network mountpoint /Volumes/TC Backup Disk not owned by backupd... remounting
11/27/08 10:02:57 PM /System/Library/CoreServices/backupd[7045] Network volume mounted at: /Volumes/TC Backup Disk-1
11/27/08 10:03:07 PM /System/Library/CoreServices/backupd[7045] Disk image /Volumes/TC Backup Disk-1/Dhiren's MBP_002332d43774.sparsebundle mounted at: /Volumes/Backup of Dhiren's MBP
11/27/08 10:03:07 PM /System/Library/CoreServices/backupd[7045] Backing up to: /Volumes/Backup of Dhiren's MBP/Backups.backupdb
11/27/08 10:04:39 PM /System/Library/CoreServices/backupd[7045] No pre-backup thinning needed: 570.5 MB requested (including padding), 426.79 GB available
11/27/08 10:14:44 PM /System/Library/CoreServices/backupd[7045] *_Copied 87124 files_* (20.3 MB) from volume Macintosh HD.
11/27/08 10:14:48 PM /System/Library/CoreServices/backupd[7045] No pre-backup thinning needed: 559.1 MB requested (including padding), 426.69 GB available
11/27/08 10:15:02 PM /System/Library/CoreServices/backupd[7045] Unable to rebuild path cache for source item. Partial source path:
11/27/08 10:15:02 PM /System/Library/CoreServices/backupd[7045] Error: (-39) SrcErr:YES Copying (null) to (null)
11/27/08 10:15:14 PM /System/Library/CoreServices/backupd[7045] Copied 1067 files (10.6 MB) from volume Macintosh HD.
11/27/08 10:15:22 PM /System/Library/CoreServices/backupd[7045] Starting post-backup thinning
11/27/08 10:15:22 PM /System/Library/CoreServices/backupd[7045] No post-back up thinning needed: no expired backups exist
11/27/08 10:15:22 PM /System/Library/CoreServices/backupd[7045] Backup completed successfully.
11/27/08 10:15:26 PM /System/Library/CoreServices/backupd[7045] Ejected Time Machine disk image.
11/27/08 10:15:32 PM /System/Library/CoreServices/backupd[7045] Ejected Time Machine network volume.
11/27/08 10:15:32 PM /System/Library/CoreServices/backupd[7045] Ejected Time Machine network volume.
Message was edited by: dhiren9The indication that the backup completed successfully is the best evidence that it did. If you want something more explicit, you can proceed as below.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil compare
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot. -
I'm trying to print out a credit card statement from my iPad, it only prints the first page not the 4 pages, please help
I read your first post when I was posing a separate question on the Mac Pro board. I now see that we may be talking about printing from an iPad with Airprint instead!!!!! I very much suspect the print command and settings are different for Airprint but I have never used it to be able to offer concrete advice. I think the setting choices could be different even with Airprint on the laptop and further that you may not even be using Safari but some special app???
I've not heard or seen the term "frame" in the context of printing before except perhaps in the context of a screen shot. Is the credit card statement a "pop-up" of some kind rather than a webpage or pdf? -
I'm still getting all these annoying popups windows, although I followed every solution suggested(safari extensions,block the pop ups) it's really disturbing please help
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
Maybe you are looking for
-
My iPad doesn't seem to sync properly with my computer (vista home). Although some sort of back-up syncing seems to be happening in the bar at the top of iTunes, no syncing message appears on my iPad. I am trying to sync some music on my computer to
-
How do I delete musics from a cdrw?
Hello, I am trying to delete musics from a cdrw without success. could you give me any clues to how do it? thanks. J. Almeida
-
How do I get rid of faint white boxes around images?
Some files that I have printed have faint white boxes around images. The images were saved in photoshop with transparent backgrounds that seem to be showing up faintly in the final printed image. Does anyone know how I can get rid of this problem?
-
Hi, I'd like to run Compiz as a standalone desktop manager. The Arch wiki has a very short section on this, https://wiki.archlinux.org/index.php/Co - ow_Manager, which suggests all that's needed is to edit ~/.xinitrc to start compiz. This doesn't wor
-
Songs bought doesn't show up in Library or Purchase History
Since I've upgraded to iOS7 and the new iTunes a couple of singles I've bought in one authorized computer doesn't show up in my other Macs (authorized with the same account) or my iPhone. When I go and search the song again in the Store it shows up a