Blank pages in site after publishing

I'm officially frustrated. For some reason I have a couple pages that keep showing up blank in my web browser after being published in iweb. 90% of the pages work.
I have tried deleting entire site off idisk and republishing with "publish all"
I have updated iweb all the way.
I have duplicated the page in iweb and then deleting the original and renaming it the original.
I just can't figure it out.... Please help!
my website is http://www.ineed2changemylife.com
That is my personal domain, I have two sites linked to it.
Thanks in advance!

I'm seeing this too with a few of my pages, notably photo "Albums" pages. Everything publishes except for the albums themselves. Page is there. Header is there. But no albums.
Am I really paying for this?

Similar Messages

Pages not blue after publishing

I've published my site twice the page two days. Yesterday I could not get the site after publishing. The pages did not turn blue. Today I started over and published the entire site again. Got the notice my site had been published. Went to the site. All's ok there, but iWeb program has not turned the 'red' pages 'blue' indicating that they have been published. Should I publish again?

Le_Anne Brown wrote:
I looked but didn't find that discussion. Wrong search terms.
Rather than reading my reply only in email, look at the actual thread and you'll see it's a clickable link — so you don't need to search.
...But also searching should have found it — click here.

L7680 Ejects Blank Page before and after print job

My L7680 recently started to eject a blank page before and after a print job; seperator page option is NOT selected. I tried all the suggested trouble shooting points in the HELP section but none have solved the issue.
This question was solved.
View Solution.

The setup button on the printer had a choice to return to all factory defaults - that solved the problem but it does take yoiu back to starting again to set other choices you may have made since starting toi use the devise.

IWeb09 pages remain red after publishing

I recently updated to iWeb09 when I bought a new iMac. I moved my old iWeb08 files across from my old MacBook. While I was messing around with iWeb09, I changed the name of my site from the default Site to Southpaws. Ever since then, I cannot publish all of the pages on my site. Even after publishing the entire site - and receiving the confirmation message that the site has been published - many of the pages on the left remain red and are not published when I check on the internet. Does anyone have any solutions? Thanks very much.

If you search this forum for "red" or "red icon you'll find that this subject has been discussed at great length. Right not there is no tired and true fix. Some have found fixes for their situation but it didn't help others. Be sure to report this to Apple at http://www.apple.com/feedback/iweb.html.
OT

Insert blank page into report after odd page

I'm trying to get my report to insert a blank page at the end of each invoice if the invoice is an odd number of pages. We're looking to start printing two-sided invoices and need each invoice to be able to be mailed to the customer. I already have New Page after on the report footer and that works, but if I have a 3 page invoice, I need it to have a blank page as page 4 (without a page number). Page numbers are also being reset for each invoice if that matters. This is using Crystal Reports 10.

Hi
You can try the below:
- Open section expert.
- Select the section after which you need a new page.
- Click on Paging Tab.
- Put the below formula in X-2 for New page after:
PageNumber mod 2 =0;
- Save and close the formula editor.
- Click on Ok.
You can also apply some suppresion condition as per requirement.
Hope this helps!!
Regards
Sourashree

Urgent: Oracle Reports : Blank Page Should print after each Group of record

Hi all,
I have a different kind of requirement, in my report I have 1 block and I want to generate a blank page after every group of records. This is because the printer is printing both side of the paper and we are giving multiple group at same time.
Cannot touch the printer setup since it is a common one. Anybody can help me in this for a fast and simple way ? "Maximum records per page" property for the repeating frame give the next group to a fresh page but there will not be a blank page in between.
Please help ..
Thanks,
Ani.

Thank you for your attention.
Empty frame with page break is not helping me since it will not hide the rest of the items which are outside the repeating frame. Like Report caption, Group Name, Page footer etc...
If I am using the empty frame, is there any way to hide all other items ?
Thanks,
Anish

Blank page with advertisement after upgrading to IOS 6 !!!

I am using my IPAD2 in China. After upgrading to IOS 6, I frequently get a blank page having a message "success" and a Chinese advertisement. I have to touch the "Done" button on the top right corner to get it out. Is it that IOS 6 have been hacked by China's service providers to force advertisements into IOS 6 ?

Thanks. It does not stop the advertisement from coming in. The advertisement still pops up now and then. It seems that China's service providers have successfully hacked into IOS 6. Maybe there is a flaw in IOS 6.

Blank pages in CMC after tomcat webserver restart

Hi everybody,
after a restart of our Tomcat web server, we have a curious problem in our CMC Central Management Console. Only a few pages of the CMC are displayed, the other pages start loading but then the load stops and only a blank page appears.
The pages:
- voyager connections
- sesssions
- preferences
- licence keys
...are working.
The others dont work.
I ensured that the SIA is running correctly and all tomcat web services are running.
What may cause the problem?
Thanks for any helps and comments.
Sebastian

Hi,
have you tried redeploying the CmcApp Do the following:
1. Stop the tomcat
2. Go to the webapps subdirectory found under the directory where the tomcat server is installed. (In Windows this should be <BOBJ installation directory>\Tomcat55\webapps ).
3. Rename the CmcApp and CmcAppActions subfolders to CmcApp_OLD and CmcAppActions_OLD
4. Restart the TOmcat and ait until the CmcApp and CmcAppActions folders are recreated in the webapps folder.
Try again to use the CmC.
Regards,
STratos

Ibooks on Ipad IOS7 shows blank page as store after update.

Hi, I have updated my Ipad to IOS7 and use the latest Itunes sw on my computer.
Itunes and Ibook show only blank page when I open the store,
tried to reload app, restart Ipad, allow cookies ... nothing worked.
Any ideas?

Okay, try this...
Go to Settings -> iTunes & App Store -> Apple ID and sign out of your account. Then sign back in with your Apple ID. Try iBooks again...
If that doesn't work, go to Settings -> General -> Reset -> Reset All Settings. When done, turn your iPad off (hold the Sleep button down for several seconds. When the red slider appears, switch it off. Wait a few seconds and then press and hold the Sleep button for 1-2 seconds and let go). After the reboot you will need to reconnect your Wi-Fi, log back in to App Store, iBook Store, and iTunes. Try downloading content again.
Hope this answers your question!
~Joe

Is it possible to move content between private and public sites after publishing the latter?

Hi. Is anyone else in this position? My institution kept its original iTunes U site after migrating our public content to the new public site last year. We now have separate public and private (university log-in only) sites and must maintain both. The Public Site Administrator allowed the copying of existing content from the original iTunes U site to the new public site, but ONLY prior to publication of the public site. I have two related questions for the community:
1) How is it possible to maintain a workflow in which faculty create a course for the private iTunes U site (wanting to keep the content restricted to our students while the course is live), but then move the content over to the public site once the semester ends?
2) With the new app for Courses and the Course Manager on the public site, what do we do with the courses already created by faculty as Collections (either in the public or private sites)?
I hope there are folks out there that can help.
Thanks!
Kevin

I'd like to see a discussion on this exact topic as well. Have you determined yet how to move a private course (apple hosted) to the public site? Can you use an RSS feed from the private?
joe

Getting a blank page in browser after inserting an imagerollover

Hello; I wanted to insert an image rollover in my page.Quite simple of course but the following happened. After inserting the rollover,using "insert,image,rollover image" and filled in the screen (first image,second image,etc) I went to my browser to look at the result and my entire page had disappeared,accept the body bg image. All the css,images en text had gone. I tried to insert a rollover in a different page(another url) and everyting worked fine,so the problem has to be in the page I am working on. Is there someone who has had the same problem?? many thanks for the help!!

Most likely caused by coding errors. Use the code validation tools below and fix reported errors.
HTML - http://validator.w3.org/
CSS - http://jigsaw.w3.org/css-validator/
If problem persists, please upload page to your remote server and post a link.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Pages stay red after publishing

When I opened iWeb, all my published pages were red. I added a new blog and hit "Publish all to .mac." The publishing process starts, then the pages all turn blue and the little clocks start spinning. Then I get a "publishing error" and the pages all revert back to red. Sometimes it actually publishes, sometimes not, but the pages always revert to red.
I also seem to have lost the ability to use the "Add comments" field. Although I select it before publishing, it never appears. What's up?

We are having the same exact issues. I feel like iweb is a testing ground and that it doesn't really work. Everyone is making pages like they are talking to themselves but we never see each others websites.
Our pages are red too and we are getting an unknown error when publishing. One person from france said "reparing authorisations". What the heck does that mean.
Please contact us if yuo figure something out. We will do the same for you.
The red pages team

Report views correctly in Report Viewer but on export or print, blank page inserted after every page

Hi all
I'm hoping someone has an idea what is causing this issue. I am using Crystal 2008 and have created many reports over the years, with no issue like this.
I have had to create a label file for an Avery label that does not appear in the Crystal Reports default list of label definitions (have done this many times before for other labels, with no issue).
The report displays perfectly in the CR Report Viewer, however once the report is sent either to PDF export or to the printer, an extra blank page is inserted after every page of the report.
The fact that it displays correctly in the viewer means there is nothing in the report that is amiss.... there is something going on when the report is sent out.
I've read a lot of similar problems, however the idea that it is a network problem doesn't explain why the hundreds of other reports I've created exactly the same way... do not have this problem!
Does anyone know the answer to this puzzle?
regards
Kaz

Hi Karen
Here is the issue. When you look at the report in the viewer you see this:
Notice the dashed line after the body of each label. That line is there because the report is formatted to be a column report:
So the viewer shows you that there is another column to be printed / exported and that is what is happening with the report.
- Ludek

Once I'm in a site I can not open anything in that site, Such as paying a credit card was able to click on the calendar & pick a date, now all I get when I click on the calendar is a blank page.

Everything works great with Internet Explore So I know the problem is FFox. Going on for about 2 weeks now. For example trying to make a calendar with shutterfly. Once I click on upload, to find my photos I get a blank page, Banking site, click on the a check # was able to see the pd check front & back now all I get is a blank page. Can not open anything within a site. Already made sure Java & Adobe Flash is up to date.

Hi There Linc Davis,
Wow, you are the best.
Yip this is what the website looks like. Great job Linc Davis.
Not surprised that the "Shop" tab is missing. Darn.
Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
Please Linc Davis

1020 Prints blank pages

HP printer 1020 Q5911A built in August 2007 fails to print after install. (posted to another solved thread).
I bought a used 1020 (circa 2007 with 2400 pages printed) for some friends. Upon connecting to their Dell desktop, it took off, loaded the USB drivers from window's site, then some drivers from HP's site. Attempts to print cause flashing red and green lights alternately, followed by the printing of a blank page. I tried my laptop but to no avail. I took it home for a more careful analysis which follows:
I have an identical 1020 which I'm very happy with. (circa 2006 with 2400 pages) I downloaded the LJ1018_1020_1022_Full_Solution Original CD install application and the HP Printer Scan Doctor to a thumb drive. By deleting the 1020 printer and reinstalling from scratch, my 1020 prints fine. Connecting my friend's 1020, deleting the 1020 and reinstalling the software, it will not print the test page as requested. Upon re-doing this procedure, I observed that on the first attempt to print the test page, the printer alternately flashes the red and green lights and prints a blank page. Additional attempts to print the test page causes a solid green light and a blank page printed. After several successive attempts to print the test page(5-6), it started printing a document I may have attempted to print much earlier (days). But nothing showed in the queue. It continued to print this document on the next several attempts to print the test page, but I can no longer be duplicate this behavior. This shows that the fuser, etc., is working. (The printed test page by the former owner is what sold me on the purchase.) I installed another toner cartridge, but no change.
I ran the HP Printer Scan Doctor. Everything checks out OK. I'm a retired computer test developer, so I know my way around, but this has me stumped.

Let me clarify. Upon connecting the printer to my friends system, it took off and loaded USB drivers and HP software, but would only print blank pages. One of the pages I chose to print was a scratch document, which appeared to go to the printer with flashing lights on the printer as normal, and I assume it got stored in the printer's memory. By making the printer not-ready (no paper), attempts to print the test page, caused them to show up in the queue. Making the printer ready w/paper caused it to apparently transfer the files to the printer, but they came out blank. (I'm not sure how this works: Does the software in the host construct the test page using data collected during device initialization and send the page to the printer, [which I suspect], or does the printer construct the page on the fly locally and print it?) This was true whether using the Dell desktop or my Lenovo laptop. After deleting the printer and reloading the software on my laptop, the symptoms remained. So I took the printer home to troubleshoot it. Hooking up my printer to my laptop, it would not print until I deleted the printer and reloaded the software. (I take it that there is some data that is specific to the printer that prevents switching printers without reloading the software- perhaps microcode difference. But it appears to download new microcode everytime the software is reloaded. Many years ago I redesigned the Dot Matrix printer tester when IBM went from the 40/80 chars/sec to the 120 cps, so I know that interface, but now everything is intelligent.)
Running the scan tool showed everything working properly, so I assume that its was doing some communications tests as well as some self tests. No !'s.
Having limited visibility to the internals, I just kept trying to run the test page several times. The first page after software reload causes red/green alternately flashing during file transfer, followed by the printing of a blank page. Subsequent attempts printed blank pages, That is untill I kept trying and all of a sudden it started printing the scratch document that I had requested it to print many pages before and over at my friend's house. So it appears that it just kept walking through old memory in the printer and printing whatever it found there, and not the freshly downloaded test page. Wierd! This it continued for 3-4 test pages, probably because I had previously requested it to print the scratch document several times. Like the pointer is not getting (re)set to the correct location in the printer memory after downloading the file.
My laptop runs windows 7. Not sure about my friend Dell, but the symtoms are the same. I appreciate the instructions for a complete uninstall, etc and I will try that. However, I don't have to do that to get it to run my 1020 which is only a year older. I can't imagine they changed the pc card in the printer, tho that could happen. Its like its getting the wrong microcode. How do I interrogate the pc card, or does all that show up on the test page. And can the test page be redirected out of the queue to a file so that it can be examined using document software.
I will download the software and do the procedure as you suggest. However, I hate to do this on my fully functional laptop using my printer. The printer is connected directly to a USB port on the computer.
As a EE, and having the same problem both at my friends house and mine, and with my printer and my friend's printer plugged into the same power strip, I think a power strip problem is remote indeed.
I'll post another reply after I run the HP Printer Install Wizard and report the results.
Thanks much.

Blank pages in site after publishing

Similar Messages

Maybe you are looking for