Blank pages on the Adminui

I have installed server Jboss.  I am able to log in. I can see the Home, Services, Settings options.  But when I click on user management, the pages are blank!
Suggestions?
Thank you in advance
p.s. it is an Eval copy of ES4 Server

I was working in a recently updated image where IE got updated to version 11, I was facing the same problem and the log didn't show any error. In my case it's still ES3 SP2 but indeed, looking at the supported browsers, IE 11 is not even mentioned for ES4.
First, I've noticed that installing Chrome (now at version 33.x) all admin pages got displayed. Second, turning on "Compatibility View" for the LC admin website allowed the page content to be displayed also on IE 11.
When looking at the page source for the blank pages, all they contained was a SAML assertion so there must be an incompatibility between IE 11 and the way authentication/authorization is managed in Adminui.
It would be worth publishing a tech note about this problem, and hopefully a future SP will address this incompatibility. For security reasons, it's nearly always a best practice to keep browsers updated and therefore IE 11 should spread pretty fast.
The answer for now, therefore, is to use Chrome (and possibly also Firefox but I haven't tested it) or to turn on Compatibility View in IE 11 for any address where the Adminui web application is running.

Similar Messages

  • When I open safari, I get a blank page and the beach ball.

    When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
    I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
    My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet. 
    Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
    Thanks in advance.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • How to avoid blank page in the report?

    adding a field in the grouping and checking the page break option means then we are getting blank page as the first page of the report? How to avoid this blank page?

    Usually blank pages appear as first page due to the presence of filler lines (//////) on top of report header.Please ensure that the top header is exactely started from top of page itself.

  • I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    Hi,
    You may open the original form in FormsCentral and toggle to “Page View” at the lower right corner. Adjust the page content to make sure no page breaks in this view.
    Thanks,
    Wenlan

  • Blank page at the beginning of the report

    I have a Report with a Group Above. I wanted a new page when a new Group began, so I selected the Group and changed Page Break Before to yes. It did start a new page with each Group, BUT there is now a blank page at the beginning of the report. How do I get rid of the blank page?
    Thanks, Wayne

    Hi Wayne,
    I don't know whether the solution provided by Jrg works for you or not. But I solved the problem in a different way.
    Insted using a page break on a repeating frame, I placed a boilerplate item in a corner just below the frame with a " "(white space) and I set the boilerplace item's property "Page Break After/Before" to "Yes". You understand me? just cheating ;)
    That worked for me.
    Cheers,
    Gouri Sankar

  • Implementing multiple page size requirement - extra blank page at the end

    My XMLP report requirement is as follows.
    - The report is printing a bunch of lines.
    - Based on data and layout requirement, lines are grouped into page where they belong (due to complex logic for determining which page a line should go to...this is done in PL/SQL package that is called in the beginning of the RDF trigger)
    - The first page needs to be printed on Legal size paper
    - Subsequent pages (IF NEEDED) need to be printed on Letter size paper
    So some report will have a 1-page output (legal size), and some will have multiple pages (1st page should be legal size, subsequent on letter size).
    Here is a sample XML data:
    <REPORT>
    <LIST_G_PAGE_NUMBER>
    <G_PAGE_NUMBER>
    <PAGE_NUMBER>1</PAGE_NUMBER>
    <LIST_G_LINE>
         <G_LINE>...</G_LINE>
         <G_LINE>...</G_LINE>
    </LIST_G_LINE>
    </G_PAGE_NUMBER>
    <G_PAGE_NUMBER>
    <PAGE_NUMBER>2</PAGE_NUMBER>
    <LIST_G_LINE>
         <G_LINE>...</G_LINE>
         <G_LINE>...</G_LINE>
    </LIST_G_LINE>
    </G_PAGE_NUMBER>
    <G_PAGE_NUMBER>
    <PAGE_NUMBER>3</PAGE_NUMBER>
    <LIST_G_LINE>
         <G_LINE>...</G_LINE>
         <G_LINE>...</G_LINE>
    </LIST_G_LINE>
    </G_PAGE_NUMBER>
    </LIST_G_PAGE_NUMBER>
    </REPORT>
    For this, I created 2-pages RTF template and using the Word Page Setup feature:
    1. First page setup is legal size (go to Page Setup, Paper tab, choose Letter and choose Apply to "Whole Document").
    The first page has the following XMLP tag:
    <?for-each: G_PAGE_NUMBER?>
    <?if: PAGE_NUMBER=1?><?call:body?><?end if?>
    <?end for-each?>
    <?template:body?>
    for-each loop that prints lines in a tabular format
    <?end template?>
    2. Second page setup is letter size (go to Page Setup, Paper, choose Letter and choose Apply to "This point forward").
    <?for-each: G_PAGE_NUMBER?>
    <?if: PAGE_NUMBER>1?><?call:body?><-- Ctrl-Break to insert a page break here --> <?end if?>
    <?end for-each?>
    It almost worked, except there is a blank page printed at the end. How do I remove the blank page? I have tried to use <?split-by-page-break:?> instead of the Ctrl-Break, but it did not seem to work (there is no page break happening at all).
    I think the extra page is due to the multiple page nature of the RTF template. Is there a way to control the page size through XMLP tag (or XSL-FO). With that, I can try having a single page template and put the page size control within the XMLP / XSL-FO tag and hope that the extra blank page at the end will go away. Can someone please help?
    Thank you!

    Sorry for the typo in my previous post... I meant Ctrl-Enter (not Ctrl-Break).

  • -Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)??? -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

    -Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
    -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • How to avoid printing an additional blank page at the end of the report

    I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
    The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
    REP-0801: Layout canvas must remain large enough to fit all layout objects
    Can anyone tell me how to handle this?

    Hi,
    I too faced similar prob.
    But when i made the After Page Value property of the report as blank it removed the blank page for me .
    Try this and let me know whether it has helped you.
    Regards
    Srinivas Pusa

  • I click on a link, get a new blank page, not the info expected. Use AVG Free Ed, Windows 7 professional.

    I click on a link, and get a new blank page, not the info expected. I use AVG Free Edition, Windows 7 Professional. I have tried "open link in new tab" - no joy. Not all links are affected. It is not possible to say when a link is going to fail or work - it seems random.
    == This happened ==
    Every time Firefox opened
    == It just started to happen about 2 weeks ago

    I get the address as it should be as in attachment when I hover over the "FLIXTER" add on the right of screen. When I click it just comes out in a new window but BLANK. Open in IE then shows me the correct view. Puzzling. I have tried disapbling ans enabling java script in my options and sometimes this works then sometimes not??

  • Blank Page at the End

    Dear All,
    My requirement is to flow a table data onto subsequent pages without repeating the header portion of the form.
    I created two master pages and two flowed subforms to do the same.
    A default blank page with the heading is coming for 2 rows of data, or whenever the amount of data is less.
    How should I solve this?
    If is it to be done by scripting, please enclose the relevant code.
    Thank you.
    Regards,
    Prosenjit.

    The address field must not flow, yet the table should flow, how will that be possible, please explain.
    Thank for your time.
    I am trying to use the 'initialization' of subform 'Page2' as follows: xfa.form.data.Page2.presence = "hidden" within a IF-ENDIF construct, yet its not working out.
    Regards,
    Prosenjit.
    Edited by: prosenjit chaudhuri on Aug 30, 2009 6:14 PM

  • Blank Page at the end of the report

    Hi
    In my report i did not have any pagebreak or section break.
    But some times i am getting extra blank page at the bottom of the report .
    How to avoid this ..
    Thanks in Advance
    Have a Nice day.

    Hi,
    It is very probable that you are have unncessary space somewhere before the end of your template.
    Use Ctrl+Shift+* to show the end of line markers and remove the unnecessary spaces in your
    template then run again the view report.
    cheers
    Jorge
    p.s If your question was answered then please grant the points and close the thread

  • Blank Page at the end of report(html output)

    Hi,
    I have created a paper layout report using report 10g.
    DESFORMAT for the report is html.
    when i take a print out of the report from internet explorer its printing a blank page at the end.
    I tried with BLANKPAGES=NO it didn't help me and even unchecked the Blank Pages property in Report Builder tool.
    Please help me in resolving this issue.
    Regards
    Srinivas.

    Many thanks. That works

  • Problem with a blank page at the end.

    Hi,
    I have a report. That comes up with a blank page at the end of the report when the report generates the output in the report builder. Also in pdf file.
    It was created by somebody earlier... and i need to fix this bug.
    Any solutions..?
    Thanks in advance.
    KK
    Message was edited by:
    KK28

    Hi
    there are a number of hits on Metalink for this...
    Subject:      Extra Page Shown At The End Of A Web Report
         Doc ID:      Note:172426.1      Type:      PROBLEM
         Last Revision Date:      04-JAN-2005      Status:      ARCHIVED
    * fact: Oracle Reports Developer 6.0.5
    * fact: Solaris Operating System (SPARC)
    * fact: Microsoft Internet Explorer
    * fact: Adobe Acrobat
    * fact: OAS
    * symptom: Extra Page Displayed At The End Of A Report Viewed on the Web
    * symptom: Only happens on one report
    * symptom: Using Times New Roman
    * symptom: Client/Server configuration works successfully
    * change: Report originally created for client/server application was moved to a web application without making any coding changes in the report.
    * cause: Bug 1386820 : HTML GENERATED ON NT AND UNIX IS DIFFERENT. ADDITIONAL BLANK LINES ON UNIX
    fix:
    Use the Report Builder on Unix to make fine adjustments in the layout to
    improve the HTML output.
    -----x------------------
    Subject:      How to set the number of rows per page dynamically in a report
         Doc ID:      Note:122714.1      Type:      SCRIPT
         Last Revision Date:      07-NOV-2000      Status:      PUBLISHED
    PURPOSE
    This article shows how to set the number of rows per page dynamically according
    to the user parameter specified.
    INSTRUCTIONS
    Follow these steps:
    1. In the Object Navigator under Data Model-->User Parameters, create an user
    parameter P_1 -- this parameter specifies the number of rows you want to
    print per page
    datatype: number.
    2. In the Data Model Editor, create the query and the layout according to your
    requirements.
    Let's assume that we have the following:
    Q_1: Select empno, deptno ename from emp
    order by deptno, ename
    G_1 has the columns empno, deptno, ename
    3. In the Data Model Editor, create the following summary columns:
    CS_numrow will be numbering the rows within the detail group
    (created within G_1).
    Set the following parameters:
    Name: CS_numrow
    Function: count
    Source: <any column that does not accept nulls> for instance, empno
    Reset at: Report
    CS_total_rows will calculate the total of rows retrieved
    (created at the report level)
    Set the following parameters:
    Name: CS_total_rows
    Function: count
    Source: <any column that does not accept nulls> for instance, empno
    Reset at: Report
    4. In the Layout Model Editor, create a Group Frame M_1 within the repeating
    frame, below the fields empno, deptno, and ename. You may have to stretch
    the existing frames to be able to fit this in.
    F_enmpno F_deptno F_ename
    --------------------------------------------- <<<< create the group
    frame here
    5. Set the properties for the Group Frame M_1 as follows:
    Print condition: First
    Object: Enclosing Object
    Sizing:
    Vertical: variable
    Horizontal: fixed
    Check the box "Page Break before".
    6. Create a Format trigger for this frame M_1 as follows:
    function M_1FormatTrigger return boolean is
    /* prints until a row number is product of P_1 */
    /* if row number is 5 and P_1 = 5, MOD is 0 */
    /* then it prints the frame, doing a page break */
    begin
    if :CS_total_rows <> :CS_numrow then -- avoiding blank page at the end
    if mod(:CS_numrow,:P_1) = 0 then
    return (TRUE);
    else
    return(false);
    end if;
    else
    return (false);
    end if;
    end;
    NOTE: This assumes that the report is tabular. If you have a break group, this
    logic can be applied for the detail group.
    REFERENCES
    Information in this article was taken from Oracle Sample Code @ Repository
    Entry #956. In order to request the binary (rdf file or .sql script), please
    log a TAR via Metalink requesting Oracle Sample Code #956
    CAUTION
    The sample program in this article is provided for educational purposes only
    and is NOT supported by Oracle Support Services. It has been tested
    internally, however, and works as documented. We do not guarantee that it
    will work for you, so be sure to test it in your environment before relying
    on it.
    -------x-------------
    the list goes on...
    Hope this helps

  • Page Break-An extra blank page as the last page.

    I have a template with a page break (<?split-by-page-break:?>) at the end of the template prior to the end of loop <?end for-each?>. This is causing an extra blank page at the end everytime the report is run. I checked this forum and got some pointers and used couple of them but didn't get the blank page to go!
    I tried this in my page break filed! <?if:position()!=last()?><?split-by-page-break:?><?end if?>
    Please help.
    Thanks,
    Fran

    Hi, ive faced a similar problem in the past, I worked around it using subtemplates, but it still gives out an extra blank page if the content on the last page comes within 3 lines of the bottom of the page.. otherwise its ok..if you could send me your template and a sample xml file at domnic26ATgmail, i will see what i can do to help.
    regards,
    Domnic

  • Avoid Creating a Blank Page in the PDF Output for conditional request

    Hello BI Masters
    I have a Conditional request on my Last page of the data it checks the number of rows in the first page then it prints the excess rows in the last page and everything is working fine but when i use the conditional request its generating a blank page at the end of the report and i doant want to display balnk page
    My Conditinal format is like this
    <?if:number(SEC3_COUNT)>2?><?if:number(SEC4_COUNT)>2?>
    <?if:number(SEC5_COUNT)>2?><?if:number(SEC6_COUNT)>8?>
    <?initial-page-number:”1”?>
    Form FDA 1572 – Statement of Investigator Continued
    Protocol: <?SEC7_NAME?> <?SEC7_TITLE?>      
    Investigator(s): <?for-each:GET_SECTION_1_DETAILS_ROW?><?SEC1_FULL_NAME?><?end for-each?>
    <?end if?><?end if?>
    <?end if?><?end if?>
    I dont want the Balnk Page to be Displayed , Please help me out
    ~Srix

    Hi Everyone ,
    I have faced the same problem,The first if condition may not effect ,If any if condition immidiately following the for loop then it will crates the problem.
    -----------------May be your problem because of this---------------------------------
    | <?FOR LOOP ?> <?IF CONDITION?><?END FOR EACH?>|
    SOLUTION :<?FOR LOOP?><?IF @SECTION:CONDITION?>?>
    <?END FOR EACH?>|

Maybe you are looking for