Blank Pale Screen, computer works fine when connected to external vid
My powerbook has been working fine, though I've been living in a very hot place so it has been subjected to extreme heat at times. One day, put it to sleep before a meeting, when I opened it to wake it up, it showed only a blank greyish/white/pale blueish screen. I rebooted, same thing. The computer makes the startup chime, the caps lock, volume and even brightness keys all work, there is just no image. When it should be showing the apple startup logo, the screen is slightly paler with really faint white lines running along center right. When it should be showing the desktop, it is blank with a small circle of slightly brighter light in the upper right hand. Connected it to an external monitor and was able to get my data off and work on it just fine. A week later, still no change to display. What's wrong? What can I do? (This computer is obviously outside of warranty and apple care as it was purchased in 2005)
Your video cable or your LCD panel has failed. If there is no change in what appears on the screen when you change its tilt angle, the LCD is probably at fault. If changing the screen's angle causes any change in the displayed image, the fault is probably in the cable. Apple's response to either fault would be to replace the entire display assembly, which includes the cable. That would cost a great deal — probably more than the machine is worth in good working condition. You could buy a good used display and install it yourself for less, if you're up for a DIY challenge:
http://www.ifixit.com/Guide/Browse/PowerBook
If you're not, you may want to start looking for another machine.
Similar Messages
-
I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
IanIt turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.
-
I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.
Your warranty includes 90 days of phone support. Contact Apple.
-
MacBook Pro is no longer working properly when connected to external monitor, help!
My macbookpro has started giving me blue screen issues when connected to my external monitor. It was working fine but now makes the computer unusable when connected. Using i-wire lead from thunderbolt to hdmi on monitor. Monitor works fine when connected to old HP notebook using HDMI lead so monitor not faulty. What has changed on my mac to cause this?
You can change your password to avoid the "L" and you can take your machine into Apple for a keyboard replacement, free under AppleCare/warranty.
See #6 here
..Step by Step to fix your Mac
and if your on 10.6 and no boot disks
Snow Leopard 10.6 password reset, no disk method
Also backup your data first
Most commonly used backup methods
How do I securely delete data from the machine? -
I have a Mac book pro 15 inch and the screen goes blank on startup. Screen comes up on safe boot. Also updated OS on line and do not have a backup disk to repair from. What should I do?
got system to boot up in safe mode and went into disk utility and did a repair on disk permissions and restarted, now everything seems to be working as it should. Now i don't have to go out and buy a new Mac but than again maybe I should.
-
Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?
Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock -
my iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still? please help
http://support.apple.com/kb/ts1398
-
My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.
Okay, I seem to have solved the problem I posted about earlier. I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French. When I switched it back to American English, my password worked when waking the computer from sleep mode. I have no idea why changing the language preference would affect the way the password works but that seems to have been the case. I'll post again if I experience more problems.
-
my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.
Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.
I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
I have an iPhone, Ipad and a Laptop. They all are configured to company's exch.I am not able to sync calendar events on iPad made from my computer or iPhone. It works fine when I make an event from iPad, it shows on computer and iPhone but not vice-versa.
-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....
-
Apple TV (1080p) works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite decoder work fine both ways.
Does it help if you set the output to 720p.
-
I am traveling and cannot connect my bluetooth keyboard to my MacBook Pro where I am. It was working fine when I left home. What can I do to fix the problem?
If you can get them paired again try making them "favorites" from the Bluetooth system preferences.
Try smc and pram reset too. May gave to do this before you can get them paired. -
FaceTime does not ring when or recognize a call when it comes in. The volume on computer is fine; when I make a call it works perfectly. whenever anyone calls, its dead. In systems prefernce, I have alerts selected. Can someone please help?
In settings, tab to "Do Not Disturb". Make shoure it is not turned on.
If this dosn't work, please tell me what version of iOS you are running.
Do this by going to Settings > General > About. Look under "Version" -
How to turn off screen on Macbook Air when connected to Computer LeD monitor?
How to turn off screen on Macbook Air when connected to Led monitor screen?
The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
Matt
Maybe you are looking for
-
While re-enabling ePrint, printer self-updated to firmware CLP1CN1435AR. Since that time, printing has been erratic. Most times I have to switch the printer off, then on again to get a document to print. The behavior is the same on all computers in
-
How do I sort ALL my bookmarks into alphabetical order?
I have read and understand that Firefox allows me to sort alphabetically within each of my folders BUT that's not what I want or need. I want my entire list of bookmarks, including the folders, in alphabetical order. It's far too confusing as it is a
-
XML parsing default empty namespace
Hi We have the the following XML document. How can extract the values of StreetAddress element using extract or extractvalue Sql functions ? Thanks Thahseen <data_StandardAddressResponse xmlns="http://www.IVR_data.com/data/dataAddressValidation"> <da
-
Flex input type for c# string array: string[]
Quick question, what would the input type for Flex be if the data type on the asp.net c# web service was a string array, string[], it seems to autodetect it as an ArrayCollection but that isnt right, so I would assume array, but i would still like to
-
Table Maintenance Generator via program using ALV OO concept
Hi All, I have a requriement to update the table using OO ALV i.e table maintenance generator program. My Z table have three fields say.. NEW status, old status and flag. I have to dispaly the records of the Z table in Matrix format. for example the