Blank preview

Hi,
     I am using Crystal Xcelsius 2008; Version 5.0.0.99, Build 12,1,0,247. After clicking the preview button, I do get the progress bar saying 'Generating swf". However, once in the preview mode, a BLANK screen appears, without any components.
     This is happening with only one of my dashboards. Others work fine. However, this dashboard has beed developed identically to the others, and I am able to refresh the data in this dashboard through Live Office, and the data too appears fine. Its only a problem with the preview, that a completely blank screen appears.
Any help will be appreciated.
Regards,
Alok.

Hello,
Once you devlop the dashbaord are you able to view the components if that is the case there might be live office connection is not existing or It is trying to refresh the data when components loading.
Check the live office connctions
Regards
Santhu..

Similar Messages

  • Finder Cover Flow image preview size is small, cannot be adjusted and showing empty blank previews in Mavericks

    When using Cover Flow the image preview in the main window (not the thumbnail list at the bottom) images appear but only use about 1/2 of the window space available.  It is also showing black/blank preview images as I scroll through the files even though they are cached. 
    I enlarge the Finder to fill my 27 inch display, slide the size adjustment handle (three lines under the file name preview) all the way down as far as I can.  The preview only enlarges to a certain point leaving the upper half of the window unused.  I wish to enlarge the cover flow preview images to use this window space even if it affects the overlapping or number of cover flow images avaialble in the window.    I am assuming this is becasue of the nature of cover flow showing the two previous and two following images to the left and right of the previewed image.  As I scroll left and right occsionally one of the upcoming images will appear as and empty preview as well.  It's all goofed up.
    Hoping for any suggestions.
    I have seen articles about using terminal to adjust "flow height" but never anything substainial that seemend like an informed solution.

    I also would like to know if there is an answer to this.  My landscape photos always display with a third of the cover flow window as blank empty space (matching your screenshot).  This seems like such a waste.  Is there any way to change the "padding" between the top of the finder bar and the cover flow preview?

  • No blank preview pics in iphoto

    Hello,
    i have the problem that some pictures have no preview in iphoto. This happends only when i do changes like turn the photo in iphoto. I get only a blank preview image but the original photos are ok.
    What can i do ?
    Regards
    Jens

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Blank Previews on JPGs & DNGs?

    My installations of Lens Profile Creator on Win XP and iMac show only blank previews of selected demo jpgs or my own dng files. Is some special display setting needed?
    Stuart

    Dear Simon,
    To which thread are you pointing?
    I still have this problem.
    If I understand it right, those without CS4 are unable to convert their raw files to DNG's which can be properly read by LCP creator?
    (I used the DNG converter packed with the latest ACR, but I have the same issue: DNG files load properly, but no previews)
    Bart

  • Blank preview screen

    I am using Photoshop Lightroom with a Windows XP operating system.
    Blank preview screen (no previews of photgraphs) appears if I click on All Photographs or on a Keyword. Previews do appear if I click on a specific folder or collection.

    You probably have a filter set in all photographs. Check the filter bar above and to the right of the film strip.

  • IDVD 08 update (blank Preview window)

    I am using iDVD08 and when use the software it displays a blank preview window (black screen, sound plays fine). This of course means I cannot create DVD menus, add videos to drop frames etc. Other Forums online say that a software update available for this version of iDVD resolves the problem, however, when i go onto 'Software update' on the apple menu, there doesn't seem to be an update available for iDVD or iLife. I cannot click on check for updates on the iDVD menu. Is there somewhere else i can download this software update from?? The support downloads on the apple website don't seem to have helped, when I have attempted to install them they say that a newer version of the software is already installed.

    Try the following:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iDVD folder. 
    3 - launch IDVD and try again.

  • Blank preview page during preview

    Hi,
    When my customer tried to preview a report at his computer(created using crystal report v8.5) from a customized program using vb6 to code, the page is blank. However, when I tried to preview the same report at all the computers in my office, the preview page displays data during preview.
    Pls advise.
    Thanks!
    Jennifer

    Hi Frank,
    Thanks for your reply.
    My client and my system are using MS SQL Sever 2005 Express version. The report connects to the db using ODBC
    and from the program, it passes parameter to the report. After that, the report will based on the parameter to select the records to be displayed from the table.
    Just to confirm, You said 'install the CR designer on the application's system' so do you mean I need to install Crystal Report 8.5 designer on my client's computer? Pls advise.
    What will be the conclusion if after installing the CR designer and data can be displayed during preview using the customised application that I had written?
    Do you think is there a possibility that this problem is due to .dll issue?
    Hope to receive your reply soon.
    Regards,
    Jennifer

  • Blank previews in fx and transitions.

    I have loaded imovie6 onto my G4 400mhz mac and it works, but the previews of transitions and fx are blank. Is my computer just too slow? The transitions will apply if I apply them, I just can see them beforehand. Any suggestions?
    Thanks in advance
    Vince
    G4 400 mhz   Mac OS X (10.3.9)  

    I'm running DW8 on 10.4.8 and some icons in file view are
    blank for me, too. I presume its a bug of some kind, esp for PDFs.
    About the previewing, I'm not sure. :)

  • Blank preview in ppt

    Hi,
    In the previous Xcelsius workgroup version while exporting to powerpoint you were getting a preview of the swf. Since my upgrade to Xcelius 2008 the swf is only visible when in slideshow mode, in other modes ppt display a blank square.
    This looks very weird when you run by the slides, it is very limiting to combine dashboards with other ppt text in the same slide. And looks blank when you print it.
    Any solution to go around that problem ?
    tks
    David

    I've got the same problem with X2008 as a result of the more recent flash it uses.  I've dealt with the situation by drawing a box around the .swf object with a text describing to the viewer that the dashboard is only available in slideshow mode.  Both text and box objects have a custom animation set to disappear automatically on slide build, hence my instructions are not visible when the dashboard starts to initialise.
    The ideal solution would be to copy a screen capture over the top of the flash that also disappears on build, but Powerpoint will not let me layer a drawing object over the top (Flash is always on top for some reason, irrespective of layering).
    Ian

  • Blank preview videos in youtube

    Since last week all the preview thumbnails for videos in youtube have become blank. I have tried everything but nothing seems too work to get the thumbnails back
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-GB; rv:1.9.0.19) Gecko/2010031422 Firefox/3.0.19
    Flash - 10.3.183.50

    Could you check your actual Firefox version, because the version reported by the forum software doesn't make any sense.
    Help > About Firefox
    You might also refer to this article: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]].

  • IPhone 6 iOS 8.1 - Photos blank / preview corrupt after restore from backup

    Hello,
    I just restored from a recent backup of an iPhone 5s @iOS 8.1 (from today) to a new iPhone 6, also on iOS 8.1.
    Everything else is ok, except the photo library. Only those images that have been edited within in iPhone 5s stock photos app over the last few months do not show up in the iPhone 6 library. The total number of images, videos etc shows up as exactly the same on both devices.
    In thumbnail view, they're just white boxes. When I click on the white thumbnail, I can see the intended image for less than a second before it turns into a blank white image again. Interestingly, if I try and revert the image to its original version (as clicked by the iPhone 5s, before it was edited in-app), the image becomes viewable again.
    I could do this if it were just a few images, but there are far too many of these scattered around in my photo library for this approach to be convenient.
    I have tried restoring from the same back up again, no luck. I even deleted the backup from iTunes, made a fresh back up of the iPhone 5s and tried restoring to the iPhone 6 - no luck.
    Is there anyway to force rebuild the photo library? Will that help?
    Or should I delete all data and settings from the iPhone 6 and start over again ?
    Any clues?

    OK I was able to fix the issue.
    Just in case this helps anyone:
    I used iExplorer and navigated to the "PhotoData" folder. I backed up and then deleted the following data files form this folder:
    1) com.apple.photos.caches_metadata.plist
    2) PhotosAux.sqlite
    3) Photos.sqlite
    Then I quit the Photos App, hard reset the iPhone and reopened the Photos App. It took a while to rebuild the photo library, but everything seems to be back to normal now.

  • Finder windows have blank preview.

    I've gone through system preferences and can't figure out why when i click on any file in a window the preview will load but there is no picture. If i click on a movie it will load and i can click on where the play button would be if i could see it; there is sound but no picture.
    For example:
    Thanks for any and all suggestions!

    HI,
    Could be the Finder preferences are corrupted.
    Go to ~/Library/Preferences. Move this file; com.apple.finder.plist to the Trash.
    Open a new Finder window.
    If that doesn't help, go to ~/Library/Preferences and move this file:
    com.apple.QuickLookDaemon.plist to the Trash.
    Try a new Finder window. Hopefully that did the trick.
    Carolyn
    Message was edited by: Carolyn Samit

  • Mail not displaying any messages.  Blank preview panes.

    I am not entirely sure when this started, but here is my problem:
    I have to constantly quit and re-open Mail. When it is hidden or minimized in the dock and I receive a new mail message (which I am notified by the red badge number on the dock icon) I will not be able to see any of my messages when I bring the window to focus. If I select the Inbox...nothing. If I select individual accounts...nothing. It says I have a new message and there is a new message indicated by a number next to the account name, but the preview pane and message list pane will display absolutely nothing.
    The only way to fix it is to quit and then re-open, but it will usually happen right again. That's the odd part...this does not happen all the time.
    I currently have 3 mail accounts setup as IMAP exactly the same on my iMac and Macbook running Leopard 10.5.2.
    To make it more confusing, this problem occurs on the Macbook about 10% of the time.
    Any suggestions?

    Woooooo!
    It was a looooooong process and I would hate to leave out any steps and cause you to lose your saved mail.
    Try this first.
    Call them. Ask for tech support.
    On the prompt, say "leopard"
    When they ask for what kind of computer tell them the computer you are working on.
    They will ask you for your name, etc. and serial number of your computer.
    In my experience, they haven't asked for the date of my purchase of leopard.
    Maybe they look up when you registered it; I don't know.
    Anyway, tell them the issue & say a friend resolved it thru tech support, but the problem had to be bumped up to a "product specialist."
    If they don't help you, post again and tell me.
    I'll try and do it.
    -- L.
    - Show quoted text -

  • Blank preview area, QT Share using expert settings

    I currently do not see anything but a black screen in the area where i would see the movie preview when i use expert settings to export:
    - Path -
    Share / Share... / Quicktime / Expert Settings / Movie to QuickTime Movie / Options... / Video (Settings...)
    - Settings -
    Compression Type: H.264
    Motion: Frame Rate (Current) fps, Key Frames (Automatic)
    Data Rate: (Automatic), Optimized for (Download)
    Compressor: Quality (Medium), Encoding (Best quality (Multi-pass)
    Preview: (Black Screen)
    How do I preview?
    Thanks for your time!

    - tried moving the playhead on the timeline
    - tried moving the playhead on the timeline (with a video clip selected)
    - tried moving the playhead on the timeline (clip viewer mode)
    - tried moving the playhead on the blue bar above the play controls
    - tried highlighting an area

  • Imovie '11 blank preview window

    Intel Core 2 Duo, 2Ghz, 3gb ram, 10.6.8
    When trying to play back any clips from camcorder or iphone there is only sound and no video.
    This also applies to the movie themes that come with the app.
    I recently did a clean install of os and dont wish to do that again, surley that can not be the only answer?
    Out of the many threads on this same problem an os install seems to be the only answer.
    Please comment or like this if you have this issue...

    Thank you for the prompt repsonse.  I did update the nVidia driver as Steve suggested, but that did not fix the problem.  The problem apparently is related to new mouse driver/software as you had thought might be the case.  I had installed a new Microsoft mouse and updated my software to MS Intellipoint 8.0.  Reverting back to 5.2 fixed the problem. 
    Now, is there anyway to inform Adobe of this incompatibility?  I have found nowhere to report bugs or incompatibilities.  I was lucky that my old mouse came with a software disk and I had run fine with the old mouse and driver/software.  New mice just point you to the MS website.  So others may well have the same problem as me, but without an old driver/software to fall back on.  Since Intellipoint 8 is much newer, I would hope Adobe would want to have PE9 compatible with it.
    Thank you again

Maybe you are looking for