Blank questionnaire received from vendor

Hi guys,
We are working on SRM 5.0 (SAPKIBKT14) and have implemented ROS scenario. We are facing an issue with ROS questionnaires. Vendor questionnaires have been created and assigned to product categories. All questionnaires related SPRO settings have been done. We want the questionnaire to be emailed to vendor as an URL. The system sends 3 questionnaires u2013 2 general (common for all product category) and 1 product category specific. The system is correctly sending questionnaire emails once a vendor completes the initial registration. Subsequently, the vendor is able to open the link and submit the questionnaires. When I check the questionnaire in Pre Screen Supplier screen, I can see the submitted questionnaires appear as a link.
However, only 1 questionnaire u2013 one of the general questionnaires has data. The remaining all questionnaires are received blank. Further there is an error u2018Error reading partner data/categories and questionnairesu2019 after the vendor submits the questionnaires.
Is this issue due to some problem with questionnaire assignment to product category? Please advice.
Regards,
SKN

Hi Claudia,
I tried this scenario again after deleting all product category - questionnaire assignment and reentering the entries. Unfortunately, I get the same error. There are few OSS notes for Questionnaire update error but for lower service packs.
Any suggestions?
Regards,
SKN

Similar Messages

  • FOC items received from vendor...

    Hi Experts,
    I have a FOC item which receive from vendor. Which module i should use for good receipt? Goods Receipt PO or Goods Receipt?
    Thanks.
    Regards,
    Danny

    Hi Danny,
    Use Goods Receipt PO Document in Purchase Module.
    In Goods Receipt PO Document Unit Price is entered as Zero.
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Advance Received from Vendor

    Dear All
    Can anyone tell me how to do configuration for Advance Received from Vendors?
    Thanks & Regards
    Kanwaljit

    HI,
    there are two type of advances:
    1) advance received from customer
    2) advance payed to Vendor
    1) advance received from Customer:
    For the configuration go to TCODE: OBXR and diuble clcik on the line D and special Gl indicator=A. then there assign the GL account you created to capture the advances to the recon account that maintain in your customer master.
    to post Customer advace payment go to TCODE:F-29.
    2) Advance paid to Vendor:
    For the configuration go to TCODE: OBYR and diuble clcik on the line K and special Gl indicator=A. then there assign the GL account you created to capture the advances to the recon account that maintain in your vendor master
    to post vendor advance go to TCODE : F-48
    hope its helpful.
    Thanks.

  • Bank guarantees (BGs) received from Vendors

    Hello
    We are on ECC 6.0
    Vendors are paid in advance against submission of BGs.
    Similarly, retention withheld as per agreed terms of Purchase order is released before expiry of warranty / guarantee period against submission of BGs by vendors.
    How do we capture BGs received from vendors in SAP?
    What are the relevant t codes?
    How do we create special gl indicators for such transactions?
    Do we need to create a separate GL Account for BGs received from vendors?
    Thanks.
    Vimal

    I used the standard special GL indicator L meant for Account type K.
    I checked on / selected noted item under Properties.
    I selected others under Special gl transaction types.
    Posting keys assigned are 29 (Dr to vendor) and 39 (Cr to vendor).
    I created a separate GL A/c for BGs received from Vendors and assigned it to vendor reconciliation a/c.
    I did all above through FBKP t code.
    I assigned this Special GL A/c for BGs received for Account type K and Special gl indicator P in OBXS t code for transaction key SGA (Automatic statistical offsetting entry).
    However, when i try to post this as a noted item through F-57, I get the following error after entering 39 posting key; Special gl indicator P for document type KA -
    Special G/L indicator P is not defined here
    Message no. F5875
    Let me know what i am missing here.
    Thanks.
    Vimal

  • Down payment received from vendor

    Hi,
    i have the system where the standard is providing the Downpayment paid to vendor with acct type-K, and down payment received from customer-acct type -D.
    How can we cater the senario where the compay receives the downpayment from Vendor (which is similar to customer) but when i try to create using Acct type-k the system does not allow me create.
    Kindly advice and treat this as urgent ...........
    best regards
    raj

    Dear George,
    Good morning and greetings,
    The account types are pre-defined in the following way
    A - Assets
    D - Customer
    K - Vendor
    M - Material
    S - GL
    You cannot create anything of this sort in the standard system.  Moreover, I am not getting your requirement, downpayment is normally paid to Vendor and received from customer.  If you are treating a vendor as a customer also, then all you have to do is in the Control screen of Vendor you have an option of defining the customer code for that vendor and thereby the vendor and customer code are interlinked.
    Kindly let me know if this meets your requirement and please let me understand your business need...if this reply is found useful please reward points.
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Sample materials(FG) receive from Vendor

    Hi all,
    We need you advise on the below requirment?
    Scenario: Company receive the sample materials  (Finished goods) form the Vendor. After receiving this into the Company the Marketing department send this to our company customers for advertizing. Sofar they are doing this activity  in out off SAP.
    From now onwords they want enter this goods in SAP suystem.
    So now the business busienss is looking for solution ( just kind of report in SAP) which should show the current availble stock when we run this report.
    How much qty received from the vendor, How much qty taken out by Marketing dept and currently what is the availble stock( sampels).
    Please note : The stock will be counted on number base.  not on value base.
    Plese adivse how to achieve this ?
    thanks,

    surya,
    To get a report with stock, available stock etc. in some way the information has to be inputted in SAP. How are you planning to do that?
    One option is to create documents in SAP and then use these for inbound and outbound movements.
    - for receiving these goods from vendor
    - for sending sample goods to customers
    I am not sure about Procuring part (inbound). For outbound part, please see below:
    For the sample sale process:
    Use FD document type - This is provided by SAP to deliver free of charge sample goods to customers.
    In FD process, there is no billing document. Only sales order > delivery
    Read about standard FD process in the internet.
    TW

  • Test / Quality certificates received from Vendors

    Dear Experts
    Can any body suggest the way to capture the actual  number
    of Vendor's test certificate.
    We have done all the relevant settings for the Vendor's certificate receipt in QM.
    With the settings, while doing GR system is warning about checking the certificate receipt. If we put "Yes" or "No" for the certificate receipt, system gives a number to the certificate from the defined internal number range.
    We tried with external number range but not getting any POP UP to enter the certificate number.
    We want to capture the actual test certificate number.
    If anybody has a solution for this, pl suggest.
    Regards
    Prasad

    Dear Experts
    Can any body suggest the way to capture the actual  number
    of Vendor's test certificate.
    We have done all the relevant settings for the Vendor's certificate receipt in QM.
    With the settings, while doing GR system is warning about checking the certificate receipt. If we put "Yes" or "No" for the certificate receipt, system gives a number to the certificate from the defined internal number range.
    We tried with external number range but not getting any POP UP to enter the certificate number.
    We want to capture the actual test certificate number.
    If anybody has a solution for this, pl suggest.
    Regards
    Prasad

  • Free ( gift) received from Vendor

    Dear Group members!!
    Is the below method correct
    Vendor supplied 10 computers @ 50000 Rupees & gifted 1 computer
    Po is created by selecting the field ( Free) in Item overview, Po released
    GRN done & invoice posted .
    Indicator for invoice receipt used not allowed
    By using ABUMN the asset under procurement value distributed  to transfered to 11 computers
    example 500000/11  that is 45454/ rupees per computer
    Is this method is correct pleas experts advice
    Regards
    shamulheq

    If you r taking about settling the capitalized expenditure you have to distribute to 11 computers, but you have to use settlement not abumn

  • Down Payment/Deposit from Vendor

    Hi Guru's
    I want to post Down Payment/Security deposit received from Vendor, How do i post this document , f-48 is for down payment to Vendor, f-29 is only for Customer.
    It can be posted through F-02  40 Debit Bank and Credit 39A Vendor, but client dont want to use F-02.
    Kindly suggest  t code for posting Down Payment/Security Deposit from Vendor.
    Thanking you in Advance.
    Regards
    Shekhar

    hi,
    create one recon account for security deposits from vendors, if u want please create one special gl indicator and same recon account assign to main recon account(OBYR) what u have assign to vendor at the time of vendor creation. once configuration is compleated
    u can try with tcode f-42
    entry will be like this
    40 Incoming bank a/c
    39 A vendor A/c
    rgds
    gopal

  • RTP from Vendor to Customer

    Hi Experts,
    We are procuring the Returnable transport packaging from vendor with 501 + M. While delivering the vendor
    returnable packaging materials (Special stock - M) to the customer, system throws an error message. Please find
    below the details.
    1) In MM, procuring the ret. pack material with 501 + M
    2) In Sales order, we are using the order type OR with the item category - TAL. (Item Category group of Returnable packaging material is LEIH)
    3) Creating Outbound delivery
    4) While issuing the material, system throws an error message as "Deficit of stock from URS" This is due to the picking of materials from the URS stock and not from the special stock M.
    Please let me know the procedure of issuing vendor returnable trans. packaging material to customer and we need to return the same.
    by
    Prabhu

    Hi,
    Returnable packaging material received from vendor are meant to be returned to vendor after using the contents  i.e after using all the raw materials/bought out components contained therein.
    As you pointed out, these belong to special stock M.
    You receive them in MIGO using 501M and then you have to return them to vendor using 502M.
    These are the only movements allowed for such materials.
    Whereas, returnable materials with customer are different - they are to be issued to customer along with despatch of FG and they come back to you after that.
    The M stock cannot be delivered to customer and vice versa.
    Regards
    Prabhu S

  • ROS Questionnaire received empty from the supplier

    Hi Everyone,
    Just two issues:
    1.The first issue is that ROS questionnaires are sometimes received from the supplier with no data. When viewed from transaction Preselect suppliers, these questionnaire's fields are also not grayed out (e.g. one can type data into the text fields and select checkboxes), which is not characteristic of questionnaires received which contain data (they are uneditable). This only happens with some suppliers, therefore I do not know where to start. How can this problem be traced/solved?
    2. Once the supplier has received the mail with a questionnaire and completes the questionnaire is it possible to display a confirmation message to the vendor once he/she has click the submit button?
    Regards'
    David

    Hi
    For the 2nd problem, the answer is yes. You can display a confirmation mail/page after submission of questionaire. To do this, open your survey, navigate to Extras--> Confirmation Page. Set the flag for confirmation here. This should activate sending a confirmation after  questionaire submission. A mail would be sent if your using attachment, else if you are using URL, then a confirmation page would get displayed.
    For the first problem, I am not sure, but you can check by saving again your questionaire.
    Regards,
    Sanjeev

  • Difference in GR qty from vendor wrt PO.

    Hello All,
    Suppose i order for 100 kg material from vendor A...But wen i received the goods it is 95 kg of material...
    So how to map this scenario in SAP..?...wht abt the 5kg of material..on whom it will be lying...excluding the delivery tolerence entry in master data..
    How the accounting entries will be...??

    hi,
    You can do the following way:
    1. Make the GR for the real qty 95 obtained and make the IR as per same qty ie. for 95
    or
    2. If you are done with the GR doc,, then make the IR invoice reduction for 5 quantities
    or
    3. Do IR for full qty and later create the credit memo for the remaining qty of 5...
    Hope it helps..
    Regards
    Priyanka.P

  • Header Text copy to PO from vendor master

    Dear all,
    I am trying to pull data storeed in vendor master to PO for header text so that we don't need to repeat to each PO for the vendor.
    I tried to link this in "Texts for Purchase Orders" in SPRO ,But not able to link it
    B'coz it's not allowing me to add the object of vendor master
    so pl guide me how i link vendor master text to PO
    Regards,
    Vimlesh

    Hi,
    In customizing ->material management -> purchasing -> purchase order -> texts for purchase orders -> define copying rules for header texts, choose "header text" and click on text linkages. Here you can enter for source object "vendor master", and for source text choose vendor master header text.
    And in the FIX INDICATOR for text you have to maintain blank. then it will copy text
    This will copy text from vendor master to PO header text.
    Please check this and revert back if you need further details
    thanks,
    santosh

  • Header Text PO from Vendor master automatically

    Dear Friends
    This is regarding automatically adoption of header text in PO from vendor master. I am following these steps
    - Maintained customizing as MM>purchasing > PO>texts for PO >define copying rules for header texts .
    in this , select the text type ( this is the PO header text ) and click on text linkage and maintain source obj as vendor master and maintain the fixing as blank ( ie text automatically adopt in the target obj)
    -Then I wrote text (needed in FR lanugage) to respective vendor in purchasing view
    Now When I create a PO, system does not propose any thing under header text
    Did I miss anything.
    Please respond
    Regards
    SG

    Hi,
    1. First I assume the configuration settings are correct
    MM- Purchasing -- PO --Texts for PO --Define Copying rules for header text
    Here the target text type (in this case the PO text type ) i.e. sequence no. is assigned to the correct source object and text (in this case the vendor text type)
    2.If you logon to the system using the language option. i.e. logon id, password and language you get the SAP screens in that language. Now if you try to maintain vendor text in FR and create a PO, the FR Text would get copied to the PO. Now if you go back to the EN logon you ll still find the vendor text in FR. So it is definitely linked to the logon language.
    There should be another way for this too.
    This is an observation and may help you resolve your issue.

  • MRKO Error : Express document "update was terminated" received from author

    Hi Gurus,
    When settling Consignment through MRKO we are getting error 'Express document "update was terminated" received from author xxxx' in ECD system.
    At workplace inbox, the error shows "Error Info...   XS 007: Address invalid".
    Please note that I am not getting any short dump at ST22 for the same error.
    My queries are:
    1. How can I create a short dump for this error....this will help in analyzing the issue.
    2. What are the probable reasons for this error can be.
    Thanks in advance for helping.
    Regards,
    MC

    Hi,
    I have tried SM13 and getting ERROR XS007(Address Invalid).
    Diagnosis says:
    The address specified is invalid or initial (address value, address type INT).
    Procedure:
    Enter a correct address that is suitable for address type INT.
    The formats are:
      1. INT (Internet Mail Address): <name>@<domain> or comment<name>@<domain> or  <name>@<domain>(comment)
      2. FAX(fax addresses): <country><number>
    ETC
    Now as already told, I have properly maintained mail-id in "Email" field & "StandardComm.Mtd" field as E-Mail  of the Vendor Master.
    The mail ID is my official ID and working.
    Please advice further.
    Regards,
    MC.

Maybe you are looking for