Blank screen after CPU upgrade for CQ60-119 series

Hi all.
The model:
I recently decide to upgrade my Compaq Presario CQ60-119TU purchased in 2008.
The upgrades:
My son will use it to play some games on it. Yes I know - it only has an integrated 4500M graphics chip - but this should be fine for Spore.
Apart from changing from 2 to 4Gb of Ram I will swap out the 250Gb to a 640Gb hard drive.The CPU is also being swapped out.
Existing CPU: Intel Celeron T1600 (1M Cache, 1.66 GHz, 667 MHz FSB)
Replacement CPU: Intel Core 2 Duo T9600 (6M Cache, 2.80 GHz, 1066 MHz FSB)
The laptop manual states this CPU as the best spec'ed replacement CPU I can put in the laptop.
Prior to this I upgraded to the lated bios which is F.65. All was working well with the T1600 at this time.
Problem:
After replacing the CPU and pressing the power button the laptop boots up briefly for a couple of seconds and then powers off for a couple of seconds. It reboots and stays on (CPU fan is running) but there is nothing on the screen at any time.
If I replace the old CPU and the machine boots up with the screen displaying text so video appears not to be the issue (well ...not broken at least)
Any suggestions on how to get this CPU to work or is the CPU defective? Thanks in advance.

Have a look here and you'll see that having the wrong mobo northbridge chipset (not compatible with the FSB of the processor) will cause the T9600 not to work. If you have the GL40 chipset forget trying to get this processor to work with your existing motherboard. If you have the GM45 chipset then your issue is probably something else.
Don't know what your chipset is? Download the free utiliy CPU-Z and run it.
FYI - The same model motherboard with the GM45 chipset is a 485219-001.

Similar Messages

Ipad2 wakes up to a blank screen after iOS5 upgrade

I have noticed two peculiar issues after iOS5 upgrade. My ipad2 screen awakens to a blank black screen after password input; this only happens when an app or a program was open when it locks. I have to close and reopen the cover and reenter password to get to the usual screen.
Additionally I have noticed the icons for several of my iapps become invisible, the name of the icon is visible and the app/program opens up if I click on the name
any suggestions?
thx

I had a similar thing on an old MacBook Pro where if I closed the lid, then reopened it before the sleep cycle took over, it would have a blank screen. I had to close the lid until the power light pulsed, then it would wake normally.
Any similarities?

Blank screen after software upgrade

My iMac downloaded a software update yesterday and restarted automatically. But when it rebooted, I have a white/grey blank screen and the system dies not boot up. After a while, I did a hard shutdown. I let it sit a while, and when I restarted it, I have same thing!! Any ideas?!? Please help!!

I think I found the problem. When I went to apple support to check and see if I could get technical support, an option came up with options, and this was one of them. They said it could be an external device causing the blank screen. They said to unplug all other external devices and then to reboot again to see if that fixed the problem. It worked. I have been having issues with my Western Digital external drive, and I think that was it. I am returning the drive for an exchange and I hope that this issue will not happen again. Thanks again for your help!

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

After upgrading to the newest version of firefox my Juniper J-web web-gui showing a blank screen after login.

Hi.
After the newest version of firefox the browser only show a blank screen after doing the login on all Juniper SRX devices.
Some one who can help me here?
Kind regards
Jonas (Denmark)

Jonas,
Please see:
*[https://support.mozilla.org/kb/Server+not+found]
*[https://support.mozilla.org/kb/Firewalls]
*[http://kb.mozillazine.org/Error_loading_websites]
*[http://kb.mozillazine.org/Browser_will_not_start_up]
It could be that you need to reset Firefox to its defaults, however there could also could be something going wrong with the login request. Please check the Firewalls and loading websites to see if anything is blocking a request.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Blank Screen after factory reset 7911 phone

Hello guys,
I had a weird issue on an 7911 ip phone. It was connected to my network and on the display of the phone was saying "ethernet disconnected".
What i did was a soft and a hard reset using 123456789*0# and then 3497672850*# following the guidelines of a conversation in the forum
https://supportforums.cisco.com/thread/2166581
After the factory reset the device has a blank screen (I left it for more than an hour connected on the network bearing in mind that some processes might be loading in the background and the firmware will load at some point..that didn't happen) and it is unable to receive an ip address ("show ip dhcp bindings", shows nothing related to the mac address of that device).
To eliminate the possibility that the problem might be on the network card of the phone, i've factory reset a working phone using the above described procedure.
I had the same problem with that phone too.
Are there are any log commands that i can use to further investigate my issue? (I can't see any logs using "terminal monitor"command)
I am using call manager express 4.3.0 on a cisco 2800 router.

Dragan,
I tried what you suggested with no luck.
What i noted is that, when i plug the power adapter on the phone and connect the ethernet cable on the switch port of the phone (the other end goes to a d-link small switch) the light on the small d-link switch doesn't come up. However if i plug the ethernet cable on the pc port of the phone the light goes green. I checked it with two phones that i've factory reset and it is the same problem.
What i understood from this, is that the pc is unable to retrieve an ip from the dhcp server and the necessary option 150 to locate the tftp server and retrieve the necessary firmware.
Gordon, due to the above mentioned problem i can't proceed with wireshark since i don't have network connectivity between the phone and my workstation.
Guys, do you have any alternatives that i can give a try?
Thanks a banch!

Blank Screen after 703HP3 (Linux)

Hi,
after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
HP703HP3 I got a blank screen after starting the machine.
All logs look got but I can't login in. Only a blank web page. No login. No
picture. Nothing.
Any idea?
Have anybody the same problem?
I went back to my snapshot. So my user can login.
Now I will try it at another server.
Andreas

Hi Massimo,
the login web page for webaccess for the user...
Andreas
"Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
> Hi,
>
> Andreas Schild wrote:
>>
>> Hi,
>>
>> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
>> HP703HP3 I got a blank screen after starting the machine.
>
> What do you mean "a blank screen"? A blank screen where?
>
>> All logs look got but I can't login in. Only a blank web page. No login.
>> No
>> picture. Nothing.
>
> I'm sorry, but it's totally unclear what you're talking about. What web
> page?
>
> CU,
> --
> Massimo Rosen
> Novell Product Support Forum Sysop
> No emails please!
> http://www.cfc-it.de

Blank Screen after Hibernate

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

Laptop only coming up with a blank screen after set-up?

Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
Cheers

Hello @15_,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Bootcamp goes blank screen after startup sign.

I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

@MT1
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

SAP BPC 10.0 Web Client Blank Screen after login

Hi ALL,
We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
If you have the same issue, kindly share..
Thanks and regards,
Hery

Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
Thanks and regards,
Hery

PC fails to reboot and shows blank screen after automatic windows updates including SP

Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3

I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

Blank screen after KitKat update

I just completed the KitKat update on an Ellipsis 7 tablet that's connected to Verizon's network, but now I'm only getting a blank screen after the welcome screen displays. Fyi: the first part of this update went smoothly. Can anyone can help me resolve this issue? I really like this tablet and use it everyday.

I contacted Verizon support and a couple of techs attempted to walk me through alternate boot methods. However, as bassclarinetl2 noted, "pressing the power button to turn the device off results in the device powering up by itself and both 'safe mode' and 'factory reset' are inaccessible via their button combinations." Therefore, I'm sending my tablet in to be repaired or replaced under warranty. Depending on how long you've had your Ellipsis 7 tablet, you may be able to do the same.
Incidentally, I have another (seemingly) identical Ellipsis 7 tablet and was able to successfully install the KitKat upgrade on this second tablet, which I'm using now. The sooner Verizon determines why the upgrade worked on one tablet and not the other, the better.

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. When connected to mac get message that phone is in recovery mode and that

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease help

Hello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H.

Blank screen after CPU upgrade for CQ60-119 series

Similar Messages

Maybe you are looking for