Blank screen after memory ram changed SL510

Hi,  I had  1GB & 2GB rams working fine in the SL510,  windows 7 Profession, 62-bit, 320 GB drive. SL510 62-bit can take up to 8GB ram.
I replaced the 1GB  by Samsung with a Hynix 4GB.  At Crucial they give specs that are replacable for existing ram.  I notice one number is different.  The original Samsung says PC3 -10600, and the new Hynix says PC3-12800.  The 12800 was given by crucial as part of the replacement numbers for the SL510.  I bought at EBay used.
Anyway, I bootup and a blank, black screen results.  I hear laptop running.  I forced closed it and re-started again.  Same...black screen as I hear laptop running.
Any ideas as to what happened? and what can correct?
I suppose I'll have to change back to original ram and see what happens.
Also, is there a certain order for rams to be installed?  Originally, the 1GB ram was first, and the 2GB was below.  I installed the 4GB ram below and moved the 2GB to top first position. (in case I want to access the 2GB easily to upgrade with another 4GB)
Thank you so much.
Massachusetts
Solved!
Go to Solution.

That's news to me. The 10600 and 12800 reflect the maximum speeds at which the RAM can operate. If you use mixed speed RAM all modules will operate at the lower speed.
Now if the PC itself has a lower maximum bus speed, as the SL510 does, then all modules will operate at that lower speed regardless of how fast they may be rated at. The x510 series memory spec is PC3-8500 which is slower than any of your RAM modules. The 1GB and 2GB modules you now have also run slower than their rated max in your SL-510.
Crucial, as you reported in your first post, recommended their PC3-12800 modules. Presumably that's because it's cheaper and simpler for them to offer just  PC3-12800 than to also offer slower modules for legacy systems. But what they're telling you is consistent with the fact that a higher speed rating is benign.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Similar Messages

  • Blank screen after setting back to Factory Default Setup

    After setting an HP Pavillion laptop with Windows XP back to the default factory setup, I get nothing but a blank screen after turning the laptop on.  The HP screen doesn't appear, there is just a blank screen.

    I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

  • Blank Screen after 703HP3 (Linux)

    Hi,
    after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    HP703HP3 I got a blank screen after starting the machine.
    All logs look got but I can't login in. Only a blank web page. No login. No
    picture. Nothing.
    Any idea?
    Have anybody the same problem?
    I went back to my snapshot. So my user can login.
    Now I will try it at another server.
    Andreas

    Hi Massimo,
    the login web page for webaccess for the user...
    Andreas
    "Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]..
    > Hi,
    >
    > Andreas Schild wrote:
    >>
    >> Hi,
    >>
    >> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    >> HP703HP3 I got a blank screen after starting the machine.
    >
    > What do you mean "a blank screen"? A blank screen where?
    >
    >> All logs look got but I can't login in. Only a blank web page. No login.
    >> No
    >> picture. Nothing.
    >
    > I'm sorry, but it's totally unclear what you're talking about. What web
    > page?
    >
    > CU,
    > --
    > Massimo Rosen
    > Novell Product Support Forum Sysop
    > No emails please!
    > http://www.cfc-it.de

  • Blank Screen after Hibernate

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

  • Laptop only coming up with a blank screen after set-up?

    Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
    Cheers

    Hello @15_,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Bootcamp goes blank screen after startup sign.

    I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

    @MT1 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Blank screen after login in SAP CRM 2007

    hi,
    we are experienceing blank screen after we login to crm2007 web client.
    what we have done
    - implemented sap note 168941, 612670, 1045941, 1144511
    - assign PFCG role to business role
    is there any other step we missed?
    Thanks.

    Hi friend,
    Please, check if in your pfcg profile you have the objects:
    uiu_comp
    CRMCONFMOD
    with value *
    Regards,
    Lalas

  • SAP BPC 10.0 Web Client Blank Screen after login

    Hi ALL,
    We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
    We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
    Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
    I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
    If you have the same issue, kindly share..
    Thanks and regards,
    Hery

    Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
    Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
    Thanks and regards,
    Hery

  • 3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

  • PC fails to reboot and shows blank screen after automatic windows updates including SP

    Pavilion- a1130n"  WINXP ProfessionalC fails to reboot and shows blank screen  after automatic install ing windows updates including SP 3

    I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
    build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
    I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

  • Blank screen after KitKat update

    I just completed the KitKat update on an Ellipsis 7 tablet that's connected to Verizon's network, but now I'm only getting a blank screen after the welcome screen displays. Fyi: the first part of this update went smoothly. Can anyone can help me resolve this issue? I really like this tablet and use it everyday.

    I contacted Verizon support and a couple of techs attempted to walk me through alternate boot methods. However, as bassclarinetl2 noted, "pressing the power button to turn the device off results in the device powering up by itself and both 'safe mode' and 'factory reset' are inaccessible via their button combinations." Therefore, I'm sending my tablet in to be repaired or replaced under warranty. Depending on how long you've had your Ellipsis 7 tablet, you may be able to do the same.
    Incidentally, I have another (seemingly) identical Ellipsis 7 tablet and was able to successfully install the KitKat upgrade on this second tablet, which I'm using now. The sooner Verizon determines why the upgrade worked on one tablet and not the other, the better.

  • Blank  screen after signing in

    I'm stuck in a blank screen after signing in.  The options to sign in or sleep function, but nothing else. And when I sign in the screen is blank.

    I am new to the "community thing"... I have the same question as you regarding the blank screen... I do not see any answers to your questions or know how to get to them...

  • BLANK SCREEN AFTER WINDOWS 7 LOGIN

    Hi, I am getting a blank screen after i login. -I have no available restore points-safe mode works fine-Explorer.exe works but some programs play up and i dont really want to do a clean install  Please help !

    Same problem  I've found a solution.
    #1 Hit fastly 5 time the left shitf button on your keyboard.
    A windows will appaers to know if you want to caps lock. Keep it open
    #2 Alt-CTRL-Del
      You have know your desktop
    #3 Go on add-remove programme
    3a) Go on windows add-remove
    3b) Remove internet explorer
    ok-ok-ok - untill it's remove and ask to restart
    #4 No more problem. You have to go on the net with chrome or firefox.

  • After upgrading to the newest version of firefox my Juniper J-web web-gui showing a blank screen after login.

    Hi.
    After the newest version of firefox the browser only show a blank screen after doing the login on all Juniper SRX devices.
    Some one who can help me here?
    Kind regards
    Jonas (Denmark)

    Jonas,
    Please see:
    *[https://support.mozilla.org/kb/Server+not+found]
    *[https://support.mozilla.org/kb/Firewalls]
    *[http://kb.mozillazine.org/Error_loading_websites]
    *[http://kb.mozillazine.org/Browser_will_not_start_up]
    It could be that you need to reset Firefox to its defaults, however there could also could be something going wrong with the login request. Please check the Firewalls and loading websites to see if anything is blocking a request.

  • Blank screen after poweroff

    First of all, sorry for my language. I'm french (I've posted my problem on the french forum here but it hasn't been solved yet.
    THE PROBLEM :
    When I shutdown my desktop computer using any command ('shutdown -h now' 'halt' of using the syslinux poweroff, and even when I try to suspend with 'pm-suspend'), I have a blank screen when I try to turn the PC on. And then the screen says "no signal". Even the BIOS doesn't appear.
    I have to use the RESET button of my tower to see the BIOS appear
    First I didn't have the problem with the command 'reboot', but it's the same now (since I changed my CMOS battery).
    And since that I have also to RESET several times to get the BIOS.
    MY CONFIG :
    - kernel : 3.14.2-1-ARCH
    - openbox + slim
    - bootloader syslinux
    - graphic card : NVIDIA GeForce 8600 GTS + current Nvidia driver (my card is not recognized by 'nouveau')
    - motherboard : ASUSTeK P5PL2-E
    - BIOS version : 0904 (up to date stable version)
    - CPU: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
    - Screen : ACER G246HL (DVI connected)
    WHAT I'VE TRIED SO FAR :
    - unplug the computer, wait, plug it.
    - reinstall the packages : nvidia nvidia-utils nvidia-libgl xorg-server xorg-xinit xorg-server-utils
    - boot on the arch's liveUSB and shutdown from there >> same problem
    - boot with the kernel options 'noacpi noapic nolapic'
    - desactivate the QuickBoot option on the BIOS (it seemed to work but finally not)
    - use the LTS kernel
    - open the computer and clean everything inside, check that everything is OK, even change the CMOS battery
    - run memetest86+ >> no error
    - check the CPU temperature
    WHAT I FOUND (quite similar):
    http://support.asus.com/faq/detail.aspx … 732A11F1E2
    Please help :'(
    Last edited by cazuza (2014-05-04 16:12:43)

    I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

Maybe you are looking for