Blank Screen after splash screen on brand new HP Z420 workstation

Tried to install Windows 10 on brand new HP Z420 and it all l seemed to go well and ran for few days.
Now when I restart it the Windows splash screen shows briefly and then goes blank and black, no green light on monitor.
Cant get into safe mode by pressing F4.
About all I can do is try disabling BIOS setting like power management etc and maybe swap out the Nvidia K2000 Graphics card.
This is a very common hardware package that ships from HP with Windows 8.1 so it should just all work. Any one else had this or have any ideas??

OK, I have no explanation, but wiping the drive, reformatting and reinstalling XP from scratch fixed the problem for me.
I understand if you don't wanna take that route. It was my last, last last resort. But among the things that didn't work:
Upgrading to XP from 2K
Adding a beefier PSU
Upgrading motherboard drivers to latest
Removing motherboard drivers totally and reinstalling
Ditto video drivers
Using different vid card
Using onboard video
Removing one, then the other bank of RAM
Reducing CPU frequency
Increasing CPU frequency
Sacrificing a goat or a chicken
I have no idea what happened in the 1st place, and I hate unsolved/unexplained glitches, but I'm glad my system's working again.
That's all I got to say about that.

Similar Messages

Computer goes to black screen after splash screen (installed new graphics card)

I installed an EVGA Geforce GTX 750ti on my computer today, but when I boot it up, it goes and stays on the splash screen for about 45 seconds, then goes to a black screen, and stays there for an indefinite amount of time. Any ideas on how to make this work?
Computer model - Pavilion p7-1298cb
BIOS - AMI 7.07 4/20/2012

Hi
Have you installed the drivers for your card that would have come with the card ?? Secondly have you changed the BIOS to work from the new card as default ?????
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Loading screen after splash screen

Hello,
Since the Beta 3 i have a loading screen ( screenshot joined ) after the splash screen, can i delete it? (By the way is there any possibility to use full screen splash screen and not only 6XX x 4XX image )
Thank you !

Hi Meyer,
I'm not sure I understand what you mean by "having a loading screen... after the splash screen." But if it's an image that you added via a visual you should be able to delete the image visual. The image visual can be as large as the
limit of the Screen.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Harold Kless Microsoft
Online Community Support

After starting up a brand new 10.8.2 iMac it linked to an older iMac, 15 hrs later I have a duplicate screen of 10.6.8; how to get rid of all that down load and free up the new iMac?

After starting up a brand new imac it down loaded off an older 10.6.8 running imac for 15 hiurs, now I have a duplicate of the older; how to dump all the older stuff and get my new imac?

OK. Log into your migrated account. Open Users & Groups preferences, click on the lock icon and authenticate.
Click on the Add [-] button and create a new account. Make it an Administrative account and name it whatever you want (but not the same as your current account) and set it up to login automatically. Log out of your current account and log into the new account. Now, select your migrated account and click on the Delete [-] button to remove it. Select the bottom option to delete immediately. DO NOT select the option to erase securely.
Now, you can choose to migrate again from your old account but be more selective of what you migrate or you can simply copy over the data you want.

Some games to not continue after splash screen.

I've already asked it on answers.microsoft.com but didn't get any reply. So, thought I would ask here.
What I've tried:
App troubleshooter
sfc /scannow
Answers in http://superuser.com/questions/562188/windows-8-metro-apps-wont-load
also, I've tried some technet links but in vain.
I've installed two games - Sonic Dash and Despicable Me 2:Minion Rush. Both of these games to not work after splash screen and they get minimized.
I've checked the event log and found this
Activation of app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational
log for additional information.
And full details here
Faulting application name: Template.exe, version: 2.0.0.0, time stamp: 0x5492b318
Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53086d7c
Exception code: 0xc000027b
Fault offset: 0x000fb152
Faulting process id: 0x1418
Faulting application start time: 0x01d0227a62078008
Faulting application path: C:\Program Files\WindowsApps\SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c\Template.exe
Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
Report Id: 9fbff746-8e6d-11e4-a383-c0cb38d6092f
Faulting package full name: SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c
Faulting package-relative application ID: App
Apparently it has something to do with remote procedure call. When I open the other game, I get same errors as the above, the only thing which has changed being name of the app.
Graphics shouldn't be a problem since these games have ALREADY run once, but not now, and I have other heavy-graphic games like Asphalt 8 Airborne which still WORKS.
I've also tried re-installing but in vain, duh. Looking for help badly. I'd appreciate any help.

Sorry. Those two links too didn't work. I did all that was instructed in them. However I really appreciate your effort in solving my problem.
I checked the event log in the path which you asked me to and got this
Activation of the app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App for the Windows.Launch contract failed with error: The remote procedure call failed..
And a detailed view
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
<EventID>5961</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>5961</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-01-28T04:44:28.735933800Z" />
<EventRecordID>71148</EventRecordID>
<Correlation />
<Execution ProcessID="1060" ThreadID="5520" />
<Channel>Microsoft-Windows-TWinUI/Operational</Channel>
<Computer>Amit</Computer>
<Security UserID="S-1-5-21-66860032-2800664797-2745505841-1010" />
</System>
- <EventData>
<Data Name="AppId">SegaNetworksInc.56538047DFC80_as33fap47kd3c!App</Data>
<Data Name="ContractId">Windows.Launch</Data>
<Data Name="ErrorCode">-2147023170</Data>
</EventData>
</Event>
Can the error log be of some help?

Lightroom CC will not open after splash screen. Adobe suggested fixes don't work. Can't find a damn phone number to call them.

Adobe fixes do not work. Can't find a tech phone number.

Robert,
I'm sorry you are having troubles. Did you try both option one and two in this link:
Lightroom doesn't launch or quits automatically after splash screen
If those don't work, feel free to go to the contact us page and then click the "Still need help? Contact us." button for support.
Pattie

After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1

I have this on both machines running 10.10.1 OS X and AE 2014. I see on line that others are having this issue. I think it needs a Patch ASAP.

Hello. Basically I can create a new comp that is set to 1920 x 1080, @ 30 frames per second for 1 minute TRT. I create a new solid layer, say red. I hit space bar or play on the screen, and it does not play in real time. ITs on my Imac as well. same OS and Same Version software.
After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1
created by Dave LaRonde in After Effects - View the full discussion
Well, before you hit the panic button, why don't you tell us precisely what you're doing when AE plays at 17fps -- the keys you hit, the buttons you click to begin play.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7102588#7102588 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7102588#7102588
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in After Effects by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Geoffrey M. Wetzel
[email protected]
[email protected]
302.353.0798

P6N SLI brand new blue screens after splash

I just put together a new P6N sli board and I can POST. After the Windows splash screen comes up, it blue screens (BSOD) for less than a second (cannot read message it is so quick) and then reboots. I've tried booting to a Windows Vista Ultimate hard drive (SATA) and a Windows XP Pro hard drive (IDE) and both do the same exact thing at the exact same spot. All of the parts of the machine are brand spanking new, fresh out of the box. I tried booting to normal mode, Safe mode, and LKGC, and all three yield same result. All lights are green on the little USB dongle.
Specs are:
MSI P6N SLI board
MSI 8600GT video card
E6600 Conroe chip,
zalman fan
2 gigs of Patriot DDR2 800, (4-4-4-12), 2.2v RAM
Maddog 400 watt power supply
My power supply only has the 1 4 pin connector, so I'm not plugged in to the other 4 pin.
Please advise...My new machine wants to be gaming, not sleeping.
Thank you.
Jon

I'm confused.
Quote from: witenko
I've tried booting to a Windows Vista Ultimate hard drive (SATA) and a Windows XP Pro hard drive (IDE) and both do the same exact thing at the exact same spot. All of the parts of the machine are brand spanking new, fresh out of the box.
Are both of these fresh installs (empty/formatted) before OS installed with all of the new parts?

Win7 black-screen-hanging-cursor problem on brand new rMBP

I am sorry but a face a problem similar to (surprisingly) many in this thread.
I have a brand new rMBP 15'' with bootcamp Win7 installed (90GB partition). Installation went painless ONLY with a fresh Yosemite 10.10.3 installation, otherwise I fell into said black screen-hanging cursor trap already during installation. After installation I could enter Windows and install some software there. Upon re-boot, black-screen-hanging cursor in top left problem.
Here is what sudo gpt -vv -r show /dev/disk0 says:
gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1954210119
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1772843400      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1773253040     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1774522576        1840
1774524416   179685376      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1954209792         295
1954210087          32         Sec GPT table
1954210119           1         Sec GPT header
And here for sudo fdisk /dev/disk0:
Disk: /dev/disk0    geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 1772843400] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [1773253040 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1774524416 - 179685376] HPFS/QNX/AUX
Any help greatly appreciated

If you built a USB using BCA and Windows ISO/DVD, it will show Windows and EFI boot both as options, when Alt Key is held.
W7 USB has the following structure .
W8+ USB has the following structure.
Does the behavior change if you
a. Resetting the System Management Controller (SMC) on your Mac - Apple Support
b. How to Reset NVRAM on your Mac - Apple Support

After Effects CC Crashing Immediately After Splash Screen?

Hey guys, installed cretive cloud recently with a full licence but most of the programs seem to crash straight away after the splash screen. After Effects, Premier, Photoshop and Media Encoder all seem to do this. Tried signing in, resigning in, uninstalling, using the adobe cleaner and re-install but still the same. Any ideas why this might be Thanks.
OS:     Windows 7 64bit Home Premium (all updates installed)
CPU:   Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
GPU:   NVIDIA GeForce GTX 680 - GeForce 337.88 Driver
RAM: 16 GB

If you don't have any pressing projects, you could try completely wiping everything off and then reinstalling.
It's just so odd...
Perhaps Mylenium might have some ideas as he's more technically-minded than I.
If you don't get any more good suggestions here, contacting Adobe Support isn't a bad idea.

App builder keeps hanging after splash screen images added

After I upload all my splash screens for SD and HD, I cannot proceed to the next screen.
There are green checks next to HD and SD, and all looks good.
I have not uploaded any fonts as there is no HTML in the app.
I have deleted and re-downloaded the app builder and still get the same behavior.

The problem was that one of the images had a resolution of 72.09 instead of an even 72. after I changed it it worked. Thanks.

Illustrator/indesign and premire pro cc 2014 crashes after splash screen

Hi, I can't figure out whats going on, I had CC running fine, the 2014 updates came and all software except photoshop crash after the splash screen. I have done everything I could think of. Verified fonts, I've uninstalled and re-installed creative cloud and the software. I ran adobe cleaner which get rid of the original CC software (I didn't want that to happen) I've deleted preferences, ran disk permissions and repair. CS6 software install and runs.
I am lost to say the least as to why photoshop CC 2014 works and yet, the others crash. Any Ideas?
Thanks.

Hi camdude,
Can you send the Adobe Illustrator CC 2014 crash logs to me at [email protected]
The steps to get the crash log are:
1) Open the finder app.
2) Press command +shift + g to open the "Go to the folder" dialog.
3) In the text edit field type "~/Library/Logs/DiagnosticReports".
4) This will take you the DiagnosticReports folder.
5) Please share the latest crash log file from this folder.
With Best Regards,
Raghuveer

Displaying error after splash screen

I am writing the client side of a client/server app that relies heavily on the connection between client and server.
I have made a splash screen and while it attempts to connect it displays the splash screen.
what i need though is that when it fails to connect it should display an alert box in the center of the screen say it has failed to connect.
I don't understand how to do this i tried using
JOptionPane.showInternalMessageDialog(null, message);
and
final JOptionPane optionPane = new JOptionPane(message, JOptionPane.QUESTION_MESSAGE, JOptionPane.YES_NO_OPTION);
then telling it to go to sleep but nothing.
how should i do this?
Scott.

ratcateme wrote:
I am writing the client side of a client/server app that relies heavily on the connection between client and server.
I have made a splash screen and while it attempts to connect it displays the splash screen.
what i need though is that when it fails to connect it should display an alert box in the center of the screen say it has failed to connect.
I don't understand how to do this i tried using
JOptionPane.showInternalMessageDialog(null, message);
and
final JOptionPane optionPane = new JOptionPane(message, JOptionPane.QUESTION_MESSAGE, JOptionPane.YES_NO_OPTION);
then telling it to go to sleep but nothing.That was a mistake.
JOptionPane.showMessage
quit

Premiere Pro not loading after splash screen, can't find fix on forums.

Fresh install, doesn't matter what I do to this machine, memcheck came out ok. I click on Premiere Pro CS3 icon loads splash screen, then kicks out an error code.
EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
P9 : 00000000
I have a fresh install of window XP home edition service pack 3, 3 gigs of ram, Ati x1200 on board memory, (also have a nvidia 8800gt that I thought was the problem...it's not.) Most up to date drivers. Running two sata hard drives both 250 western digitals.
system information
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name DESK
System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
System Model MS-7327
System Type X86-based PC
Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
SMBIOS Version 2.5
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name DESK\Auggie
Time Zone Central Standard Time
Total Physical Memory 3,072.00 MB
Available Physical Memory 1.28 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 3.85 GB

ok, one more time. I have a problem with Premiere Pro CS3 Crashing after the splash screen. It loads everything right on the splash screen, but when it goes to loading the work areas, it goes white and comes up with the error code of :EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
P9 : 00000000
What ever that is.
I have an amd 4800+ Dual Core and 3 gigs of ram. An Nvidia 8800gt with latest drivers installed for all of it. Running windows XP home sp 3 build 2600 More information on my system below.
I've re-installed 3 times, and even tried a clean install of vista. I've done the hold shift while loading and get the same issue no matter what. I've Deleted the premiere folder in local settings.
I've done all the steps at http://premierepro.wikia.com/wiki/Troubleshooting
a screen capture from process explorer and cpu fan can be found here http://www.theslam.net/images/desktop.jpg
DXdiag file can be found at
http://www.theslam.net/images/DxDiag.txt
hopefully this helps.
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name DESK
System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
System Model MS-7327
System Type X86-based PC
Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
SMBIOS Version 2.5
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name DESK\Auggie
Time Zone Central Standard Time
Total Physical Memory 3,072.00 MB
Available Physical Memory 2.36 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 5.84 GB
Page File C:\pagefile.sys
Name NVIDIA GeForce 8800 GT
PNP Device ID PCI\VEN_10DE&DEV_0611&SUBSYS_06DC19F1&REV_A2\4&3B252A0E&0&0010
Adapter Type GeForce 8800 GT, NVIDIA compatible
Adapter Description NVIDIA GeForce 8800 GT
Adapter RAM 512.00 MB (536,870,912 bytes)
Installed Drivers nv4_disp.dll
Driver Version 6.14.11.8122
INF File oem2.inf (nv4_G9x section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1440 x 900 x 75 hertz
Bits/Pixel 32
Memory Address 0xFD000000-0xFDFFFFFF
Memory Address 0xC0000000-0xDFFFFFFF
Memory Address 0xFA000000-0xFEAFFFFF
I/O Port 0x0000D800-0x0000D87F
IRQ Channel IRQ 18
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nv4_mini.sys (6.14.11.8122, 6.01 MB (6,301,248 bytes), 12/26/2007 4:35 PM)

After Effect CS6 crashes after splash screen

I cannot get After Effects to open. When I try to open the software, I get a splash screen, and then the window opens, but the it stops responding before the interface can appear. I thought the issue may have been my virus protection (norton), so I tried shutting down my firewall and restarting my computer. This seemed to work for me the first time I tried it; After Effect opened and everything seemed to work fine, but the next time I started the computer and opened the software it continued to crash, and what I thought was the solution no longer worked. Premiere, Photoshop,and Audition work fine. However, the trial version of FX Home's software, Hitfilm 2, gives me the same problem as well. I have tried alot to get both of these programs to work with no success. I would appreciate any suggestions as to how I might fix this.
Computer spec:
win 7 64-bit
intel i7 960 3.2ghz
12 gb ddr3
nvidia 560 ti

Updated to 310.7 from 306.97, but still no luck. When after effect stops responding there is sometimes a dialog box asking me if I want to send my information. This dialog box does not always appear every time I try to open after effects, but when it does, this is the additional information it gives me:
Files that help describe the problem:
C:\Users\Owner\AppData\Local\Temp\WER9F1C.tmp.WERInternalMetadata.xml
C:\Users\Owner\AppData\Local\Temp\WER193B.tmp.appcompat.txt
C:\Users\Owner\AppData\Local\Temp\WER19AA.tmp.mdmp
However I can't find these files on my computer. This is also the same information I get when trying to open FX Home's software, except when I try to open that software I do not get a splash screen or window, the .exe shows up for a few seconds in the task manager and disappears.

Blank Screen after splash screen on brand new HP Z420 workstation

Similar Messages

Maybe you are looking for