Blank screen after trying to update vista to windows 7 on dv7-1103ea

Hp pavilion dv7-1103ea laptop

Hello monya1112, welcome to the HP Forums.
It appears that you were updating from Windows vista to Windows 7 on your notebook, that now you have a blank screen. I will try to assist you with this.
When turning on the notebook, is the screen blank yet everything on?
If so you may want to start with this document:
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
Let me know how this goes for you, thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

Blank screen after display driver update Satellite Pro P200

I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
Things I've tried:
# booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
# connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
# I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
# It allowed me to increase the size of the data partition.
# The display driver update worked fine on the fresh install.
Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
Hopefully the instructions in there will help anybody who gets caught with similar problems.

Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen after latest BIOS Update

Hi
I have strange issue after the Hp Software Update. Recently i have connected to High Speed internet and Hp Asistant shown a Bios update for my System and i chose download. after that my Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen and Caps Lock button Blinks Randomly and F12 Button also on. Kindly Suggest a Solution for this. I have been irritated by Hp Customer Care support.
My Mobile No. [Personal Information Removed]
Email ID is [Personal Information Removed]
for any help you can send or i am availbale on above contact address.

Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I read your post about the BIOS, and wanted to assist you! The blank screen and blinking of your Caps Lock, is the system trying to give you the error code for the issue your notebook is having. You can review the following document for further assistance, if needed:HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code Please note the blinking sequence of your Caps Lock, and follow the instructions in the document above. From the information that you provided, it is possible that the blink code will be related to a BIOS error. You can always try performing a System Restore, to set the notebook back to a previous working point. You can also try checking this site for BIOS drivers. Once there, you can select your Operating System and click "Update", you should be able to access and download the BIOS drivers. If you downloaded the latest driver from that site, try uninstalling the driver and installing the previous version. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great weekend!

HT201263 My iPhone 4 is stuck on the "Connect to iTunes screen" after trying to update to iOS 7.0.4! Help!

I was attempting to update my iPhone 4 to the new iOS 7.0.4 via my computer after I plugged it in to create a backup copy and something went wrong before it could finish and I recieved an error message. Now my phone is stuck on the "Connect to iTunes screen". I've tried everything to reset & restore my phone with no luck!
I have:
-Restarted my computer
-Updated iTunes to most current version
-Turned phone on and off several times, waiting up to a half hour before turning on (to be greeted directly with apple logo then the connect to iTunes screen)
-Turned on, turned on and held home button (nothing happens)
-My computer is NOT recognizing my device at ALL! But when I plugged my boyfriends iPhone in, it detected it no problem.
I tried calling my phone from the other phone and it goes straight to voicemail. I am super frustrated! Does anybody know what is going on?

I was able to restore my phone!!!
I called Apple and they said there was nothing more I could do. I called my carrier Verizon and was able to get my computer to recognize my device after trying this-
Solution:
After trying EVERYTHING this is the ONLY thing that worked-
I took the USB connector cable out of the USB port it was in, and tried another one on the otherside of my laptop and iTunes was able to discover my phone in recovery mode. My phone was reset and everything is fine ( thank gosh for backup copies!)

IPhone 4: My IPhone keeps in the "plug-into-iTunes-screen" after trying to update to iOS 5.0. The phone is not showing up as a device in iTunes anymore.

My IPhone doesn't turn on and keeps in the "plug-into-Tunes-screen" after update to new IOs 5.0 yesterday. I also tried to restore it, but it still keeps in the plugin mode. In ITunes the IPhone doesn't show up as a device anymore, but Windows 7 detects it as a camera. I started the problem diagnose via ITunes and it says "iPhone can't be found".I'm using the new version of iTunes.
Can anyone help me?

I have the exact same problem and have just logged on here to see if anyone can help also? My iphone is up and working but itunes won't recognise it as a device... just updated itunes aswell.
Any help would be hugely appreciated!!

HT201263 iPod touch 4th gen stuck on apple screen after trying to update ios 6

iPod 4th gen stuck on apple screen after I tried updating to IOS 6. It won't turn off or reset even after updating iTunes to latest version. My iPod doesn't show up when I connect to iTunes. HELP PLEASE!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Blank Screen After Today's Updates

I was thrilled to see the new kernel and intel drivers show up in today's updates, but after rebooting, I have a blank screen on my E6410 laptop, which has Intel graphics. The Dell logo comes up, then the Grub menu, and then the screen goes blank. It was working perfectly fine before the update. Did anyone else run across this?
Last edited by jlacroix (2010-11-26 04:14:51)

Same problem here. How do you downgrade anything or change any settings when the screen just goes blank right at the start?
edit: I'll share some more for good measure. I'm on an nvidia gfx so it shouldn't be Intel-related. The system actually seems to be booting since I can log in and sudo reboot in the dark to prompt a reboot, which means I could technically try and fix this without seeing any output. That just seems dumb, though.
edit2: Removing vga=773 from the kernel line at boot at least restores cli visibility. startx returns "no screens found" so I'll try a downgrade.
edit3: Downgrading to 2.35, along with downgrading nvidia & nvidia-utils to 256-something as well as ndiswrapper and tiacx finally got me back to where I need to be with X working fine.
Last edited by cake (2010-11-27 13:42:20)

Frozen "Terms and Conditions" screen after trying to update iOS 8.0.2

Can anyone help me with this problem? Update for iOS 8.0.2 freezes at the "Terms and Conditions" page. I also noticed that a bitton in an apple support email would not work.

At 11pm ext on 9/29 i was finally able to get past the Agree window on my iPad trying to update to iOS 8.0.2 after I made a change and activated or agreed to terms for iCloud.
Unfortunately, I am now not able to get past the Update Requested (grayed out) rectangular window below Learn More.
Additionally, not able to update any application nor is my CNBC application openable nor updatable. Really frustrating.

My iPhone 4 stuck in the "connect to iTunes" screen after trying to update to iOS 7

Hey guys.
So i have a pretty big problem here. Today after a little bit of work I updated my iPhone 4 to the new iOS 7. I went to bathroom at some point, while my phone was updating, and when i returned the screen of iPhone showed the "connect to iTunes screen" and no matter what I did, it just stayed there. iTunes doesn't recognize my phone anymore, doesn't matter how many time I plug it in and out. I tried this thing: http://support.apple.com/kb/HT1808 ,but it did not worked. I tried reinstalling my iTunes, but it did not work either. If the little things matter I left "lauch iTunes" box unchecked after reinstallation. Any help apriciated guys, im desperet here.

YESSSSSSS HUGE PROBLEM!
Iphone 4 downloaded ios 7 i hit the install button and the phone entered recovery mode and hasnt woke up since, tried tiny umberella and it wont kick it out of recovery mode. Itunes recognizes it in recovery mode, hit update restore, after the update nothing pops up or happens, and right back to square one like i never even updated or restored.
Help pleaseeee

Phone frozen on plug into itunes screen after trying to update

I have an iphone 5 and I just updated my itunes to update my phone for iOS7. There was a message that said it could'nt update and then my phone became frozen on the screen that tells me to plug into itunes. I am plugged into itunes but my computer/phone is not recognizing that and I can't get off of that screen. I have tried to turn off my phone and back on, unplug it and plug it back in and nothing. what do I do?

I had the same problem after updating...I thought that was my phone's problem, so I restored it...unfortunately, i had forgotton my password...I need that password to restore my iphone back up.
Any idea how to recover this password.... Thanks much

Iphone 3GS 32gb stuck on plug into itunes screen after trying to update OS

I installed itunes on my new computer. When I plugged in my iphone to sync, itunes identified my phone and offered an OS update. I followed the steps to update and began the process, shortly after there was an error message and now I my phone is paralyzed with the "plug into itunes image". I tried re-plugging the phone into itunes but it will no longer show up. Any ideas?

I had the same problem after updating...I thought that was my phone's problem, so I restored it...unfortunately, i had forgotton my password...I need that password to restore my iphone back up.
Any idea how to recover this password.... Thanks much

Resume results in blank screen after trying to install printer

Yesterday, I tried to install a network printer (got some trouble with cups, avahi, ...). But after a successful installation, I noticed that resume from suspend doesn't work anymore.
I tried to disable all services I had enabled, but to no avail. I tried to look for something related to cups or printer drivers blocking resume, but couldn't find anything about it.
The suspend log also doesn't reveal any problems.
I don't know how to debug this further.
Initial commandline parameters:
Sun 23 Nov 10:20:45 CET 2014: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux ArchingFar 3.17.3-1-ARCH #1 SMP PREEMPT Fri Nov 14 22:56:01 CET 2014 i686 GNU/Linux
Module Size Used by
ctr 12807 1
ccm 17326 1
uvcvideo 69760 0
videobuf2_vmalloc 12720 1 uvcvideo
snd_hda_codec_hdmi 44413 1
videobuf2_memops 12471 1 videobuf2_vmalloc
videobuf2_core 43187 1 uvcvideo
v4l2_common 12867 1 videobuf2_core
videodev 120318 3 uvcvideo,v4l2_common,videobuf2_core
media 17894 2 uvcvideo,videodev
snd_hda_codec_via 22374 1
snd_hda_codec_generic 57972 1 snd_hda_codec_via
joydev 16847 0
mousedev 17096 0
arc4 12480 2
snd_hda_intel 26011 0
coretemp 12708 0
hwmon 12818 1 coretemp
intel_powerclamp 16978 0
snd_hda_controller 26498 1 snd_hda_intel
rtl8192se 60573 0
snd_hda_codec 93737 5 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
kvm_intel 133480 0
kvm 359938 1 kvm_intel
jme 38929 0
i915 810084 7
iTCO_wdt 12727 0
iTCO_vendor_support 12585 1 iTCO_wdt
crc32c_intel 12659 0
drm_kms_helper 71440 1 i915
rtl_pci 25683 1 rtl8192se
rtlwifi 49558 2 rtl_pci,rtl8192se
psmouse 106236 0
drm 212597 4 i915,drm_kms_helper
pcspkr 12531 0
mac80211 517300 3 rtl_pci,rtlwifi,rtl8192se
i2c_i801 16845 0
cfg80211 381789 2 mac80211,rtlwifi
evdev 17136 13
rfkill 18387 2 cfg80211
jmb38x_ms 16960 0
mac_hid 12569 0
snd_hwdep 12906 1 snd_hda_codec
memstick 13432 1 jmb38x_ms
mii 12595 1 jme
snd_pcm 73796 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
serio_raw 12737 0
i2c_algo_bit 12640 1 i915
i2c_core 41134 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
mei_me 17620 0
lpc_ich 16616 0
mei 69910 1 mei_me
snd_timer 26106 1 snd_pcm
snd 55101 8 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 12895 2 snd,snd_hda_codec
intel_agp 17232 0
tpm_tis 17022 0
intel_gtt 17584 3 i915,intel_agp
shpchp 30666 0
tpm 30939 1 tpm_tis
wmi 17147 0
intel_ips 17205 0
agpgart 31256 3 drm,intel_agp,intel_gtt
video 17718 1 i915
thermal 17343 0
battery 13164 0
ac 12627 0
button 12833 1 i915
acpi_cpufreq 17050 1
processor 27273 1 acpi_cpufreq
sch_fq_codel 17151 5
ext4 458412 2
crc16 12327 1 ext4
mbcache 17027 1 ext4
jbd2 80994 1 ext4
sd_mod 43718 4
crc_t10dif 12399 1 sd_mod
crct10dif_common 12340 1 crc_t10dif
sr_mod 21568 0
cdrom 46828 1 sr_mod
atkbd 21926 0
libps2 12643 2 atkbd,psmouse
ahci 29099 3
libahci 26670 1 ahci
libata 161789 2 ahci,libahci
ehci_pci 12464 0
scsi_mod 128181 3 libata,sd_mod,sr_mod
ehci_hcd 65019 1 ehci_pci
sdhci_pci 17695 0
sdhci 34539 1 sdhci_pci
led_class 12747 1 sdhci
usbcore 170981 3 uvcvideo,ehci_hcd,ehci_pci
mmc_core 95876 2 sdhci,sdhci_pci
usb_common 12484 1 usbcore
i8042 17690 1 libps2
serio 17914 9 serio_raw,atkbd,i8042,psmouse
total used free shared buff/cache available
Mem: 2900148 423468 2105868 43032 370812 2256080
Swap: 1952764 0 1952764
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/50netcfg suspend suspend:
suspending interface wlan0 with profile thuis
:: thuis down [done]
/usr/lib/pm-utils/sleep.d/50netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun 23 Nov 10:20:46 CET 2014: performing suspend
Last edited by sanderd17 (2014-11-23 09:59:20)

I dont believe it has anything to do with printing. There is a known bug in 3.17.3 / 3.17.4 that affects i686 kernels
https://bbs.archlinux.org/viewtopic.php?id=190013
https://bugs.archlinux.org/task/42820

My iPad 2 is stuck on the connect to iTunes screen after trying software update

I was updating my software on my iPad 2. Now it is stuck on the connect to iTunes screen. Help!

That is telling you to connect to iTunes on your computer because now you need to restore the device. Something went wrong when you updated. So connect you iPad to your computer's iTunes and restore.
iTunes: Restoring iOS software

HT201210 iphone is stuck on itunes to usb screen after trying to update software...what do I do?

HI: I tried to download latest software to my iphone 5....It is stuck. Screen shows itunes to usb screen.....cannot get it to reset. What do I do?

Connect the iPhone to your computer and launch iTunes.

Stuck on "connect to itunes" screen after trying to update

Update was interupted because of "unknown error"
Now my Ipad is stuck on "Connect to Ituns"
Have tried to reset by holding both buttons for a long time but still only returns to Connect to Itunes sceen.
Itunes does not recognize the ipad.
Anyone any ideas exept for turning it in for service

Makes sure you disable any antivirus or software firewall on your desktop. They can get in the way of the update, causing this problem.
Have you actually got the update downloaded yet? If not, it might be helpful to download and install separately

Blank screen after trying to update vista to windows 7 on dv7-1103ea

Similar Messages

Maybe you are looking for