Blank screen appears after deploying and run?

Hi,
I have implemented a WD application i.e. a quiz application,
1)i have a t-layout
2)Top segment has welcome iview
3)left segment has question
4)right has question mark image
i have defined plugs and actions as well
But when i deploy and run this application, only blank screen appears.Any ideas what i am missing?how to make it run??
Thanks $ Regards,
Ameya

Hi Ameya.
At the time of Comonent creation it will automatically creates a view and window.
so you need to add[embed] your view to the window
open window right click and select "embed view" and then select existing view
select your view from the list
rebulild the project and run
Regards
Chaitanya.A

Similar Messages

Blank White Screen Appears after deploying the form on server

Hi Experts,
We have one strange issue with the interactive form developed.
One of our end user is seeing a Blank White Screen with Red cross at corner when he opens the form in portal.
The form Layout type is ZCI and Display type in Web Dynpro is Native. THe user has Adobe 9 version and working on Internet explorer 6.0.
Kindly let me know how to solve this problem.
Thanks & Regards,
Phani.

Hello,
this happens when the activeX component is not installed for ACF forms. You say you have ZCI so that should not be the issue. I would recommend to try to open other PDF forms on the internet or offline using this users browser. I would re-install the Reader (well, I would use 8.1, because I´ve heard 9 has problems sometimes). And maybe try to install that activeX component. And... now it reminds me of... check his browser security properties, maybe he is so "secure" that he cannot see the form.
Otto

Blank screen appears for 45 sec after HP logo... ??

Blank screen appears for 45 sec after HP logo... How could i overcome that problem...??

HI @vamshi_krishna
Welcome to the HP Forums!
It is a super place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your notebook powers on and 45 seconds after the HP logo you get a blank screen.
Here is link to Computer May Exhibit a Black Screen When Powering On.
Another one that may help is Computer does not start (Windows 8)
As I do not know your location this one may be applicable or not. Computer Displays HP Logo but Then Displays Black Screen After Installing Driver (Asia-Pacific Japan...
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

Nah - that's just the normal boot process.
Clinton

TS1541 a blue screen appears after a gray screen with the logo and the spinning gear

start up problem...a blue screen appears after the gray screen and the spinning gear

Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk. You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

Error executing the Query after deploying and executing the application in WLS 6.1 SP3

Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.

Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

While Deploying and running the application

Dear all,
While deploying and running the application, after importing the relevant files into my local amchine workspace from another machine, i am facinf exception/error message as below:
'Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found'.
Would someone suggest for the same.
With Regards,
Lux.

Hi,
This is the message i am receving during runtime
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4013.00.0000.20050607163945.0000 (release=630_SP_REL, buildtime=2005-06-07:21:12:54[UTC], changelist=351986, host=PWDFM067)
Web Dynpro code generators of DC local/SurveysOverview:
SapDictionaryGenerationCore: 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:02:28[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4013.00.0000.20050609113138.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:05:41[UTC], changelist=352442, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:40[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
SapGenerationFrameworkCore: 6.4013.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:55:55[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:17[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4013.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:59:56[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:48[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:46[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NullPointerException
at com.sap.survey.NewSurveyView.onActionCreateSurvey(NewSurveyView.java:180)
at com.sap.survey.wdp.InternalNewSurveyView.wdInvokeEventHandler(InternalNewSurveyView.java:198)

After load and run primary installation firefox it run to endless without load any thing

after load and run primary installation firefox it run to endless without load any thing
it run for more than 2 hours.
this happened after install VLC with "groovorio" adware and find that Firefox can't update so I uninstall it to reinstall it without success.
nothing happened no message appear but the download and installation for firefox still running endless.

after load and run primary installation firefox it run to endless without load any thing
it run for more than 2 hours.
this happened after install VLC with "groovorio" adware and find that Firefox can't update so I uninstall it to reinstall it without success.
nothing happened no message appear but the download and installation for firefox still running endless.

Unable to deploy and run WD Java app through NWDS with a remote J2ee engine

Hi ,
We have a clustered server instance configuration in our environment.
I have already added the message server port and the server details in the remote J2ee engine configuration in NWDS through windows->preferences .
I found the port no. and the host server name using <servername>:<portname>sap/monitor/systeminfo
Also, I can see the SDM , dispatcher and the server running/shown in green in the J2ee engine setting.
But when I was trying to connect deploy and run the application, first it asks for the SDM password and after entering it , it aborts with the following message :
Sep 18, 2007 8:32:15 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : XXX00
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/check1/LOCALS~1/Temp/temp11565my_pro.ear
Deployment exception : Server XXX00 did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server XXX00 at port 50018: Connection timed out: connect
Inner exception was :
Server XXX00 did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server XXX00 at port 50018: Connection timed out: connect
Can anyone let me know what can be the reason.
Best Regards
Sid

Hi Siddharth,
Re-start SDM process of J2EE engine.Make sure when you are deploying u r project others are not deploying their project.
SAP Note : <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_jas/~form/handler">701654</a>
Regards,
Mithu

Log in screen appear after Mac goes to sleep even if screen lock is turned off.

Log in screen appear after Mac goes to sleep even if screen lock is turned off. This happens usually but not always. Using Yosemite, 2 year old iMac. This has only started to occur recently and it happened in Mavericks also.

Howdy stkh,
You may want to check the General pane of the Security & Privacy System preferences to make sure that the Require password...after sleep or screen saver begins is not checked. See this article for reference -
OS X Yosemite: General pane of Security & Privacy preferences
Thanks for using Apple Support Communities.
Best,
Brett L

When I try to connect to Safari, only a blank screen appears.

When I try to connect to Safari, only a blank screen appears.

Safari always opens at the web page last viewed. There is no home page for mobile Safari. To open a web page, tap the address field (on the left side of the title bar), then type the web address and tap Go. Or you can use the search field (at the right side of the title bar) to iniate a search.
Look at Chapter 7 of the iPhone iOS4 User Guide

CCS-Blank screen appears when Comm Management Profile is assigned

Hi,
We are trying to configure the contact center simulator on CRM 2007.
but when we assign the comm management profile to the business role- ic_agent a blank screen appears on the UI , if we remove the same , view on UI seems to be fine with all the links.
If any of you have faced a similar issue please let me know how this can be resolved.
Regards
Prathiba

Hi,
Have you done the Communication Management Profile configurations and settings appropriately. To be specific please ensure that you have taken care of the following:
Maintain communication management software profiles in the Customizing activity
1. Define Communication Management Software Profiles.
2. Assign the communication management software profile to a business role in the Customizing activity Define Business Role.
3. Maintain communication management software system settings in the SAP Easy Access Menu by choosing Maintain System Settings.
4. System administrators define the communication management software channels and queues in this activity.
5. The Com Mgmt Software System ID must have the same value as the Com Mgmt Software System ID in Maintain Communication Management Software Connections (Prerequisites).
6. You must maintain this activity in each system instance, for example, development, test, and production.
7. Assign communication management software profiles in the SAP Easy Access Menu by choosing Assign Profiles.
8. System administrators assign communication management software queues and channels to profiles in this activity.
9. You must maintain this activity in each system instance, for example, development, test, and production
Please go through the following help
http://help.sap.com/saphelp_crm60/helpdata/en/45/f06320312c3112e10000000a1553f7/frameset.htm
Regards,
Deepak

Unable to Deploy and Run a WebDynPro Application in NWCE 7.1 DS

I have successfully built a test application in WebDynPro within the NWCE 7.1, but every time I try to deploy and run the application I get the following error:
No default system is configured in SAP System Registry [ERROR: Apr 24, 2008 10:32:51 AM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Worker-19,5,main]] ]
It seems like a straightforward error, but when I go to the System Registry I cannot see how to set up a default system for the application. There is no "DefaultSystem" entry and so I am sure that I have to add one, but cannot find any documentation to help me do this.
Thanks.

First, thanks for the fast responses.
I had gone to SAP AS JAVA preference before, but couldn't figure out how to get my system to show up in the dropdown box. When you put in the server name and the 0 instance, it then finds the system and all instances under the system. That was my missing link.
I can now deploy and run and move on to my next (inevitable) problem.
Thanks again.

How to deploy and run EJB in eclipse without XDoclet

Hi Friends
I am new in j2ee.In my academic project i want to do some ejb programming.
For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
If u have saple code or useful link regarding this please send it as soon as possible.
Thanks in advance
How to deploy and run EJB in eclipse without XDoclet

HI Welcome to J2ee...
I am also new to this...But i ll share my ideas with you...
In EJB 3.0 No need of any Deployment Descriptors....
And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
XDoclet is not mandatory...
Gopal V

Blank screen appears after deploying and run?

Similar Messages

Maybe you are looking for