Blank Screen backlight come on

Unit will play music, will sync, has backlight but no display of words or battery symbol. Does anyone have any ideas as to what could be wrong? Bad display?
20G unit
Thanks

Did you try resetting the iPod with the two-button combo?
http://support.apple.com/kb/HT1320
If that does not help, you can try using the Restore button in iTunes to erase the iPod and initialize its software.
If Restore does not work, it may be a hardware problem with the display.

Similar Messages

Transaction launcher gives blank screen

Hii All
I have configured a TL to launch Tx. - crmd_order(CRM) but it displays a blank screen.
I have already tried the following (by referring to SDN posts) :-
1. Notes 1620007 and 1521043 are already implemented in our system.
2. Maintained proper URL in CRMS_IC_CROSS_SYS. It is wokring fine when opened directly in IE.
3. Activated and tested the relevant ITS services (SICF).
4. In sicf service, the SAP implementation area is selected as "Signature Design" ( from the posts i found that if thevalue is "Netweaver Classic" then the blank screen issue comes).
5. Executed the report to publish ITS services : SIAC_PUBLISH_ALL_INTERNAL.
6. Executed BOR object in swo1. It is wokring fine.
But it still displays the blank screen. Please suggest some solution or the step which I am missing.
Thanks in advance.
Shafali

Hi Shafali,
You can find the detailed steps of implementation here:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true]
Regards
Leon

I can't download apps! Every time I try, it asks me to chose a security question and I try, but I just comes up with a blank screen and I can't choose a question. If I click no, I don't want to put security questions, it doesn't install the app. HELP!

I can't do it! I am willing to add questions but I can't because it just shows me a blank screen. I even tried rebooting my entire iPad2 and that didn't work. I know it is not a certain app because I tried multiple ones.... HELP!

found answer on another thread...passing along
https://discussions.apple.com/thread/4052317?start=30&tstart=0
Re: Forced Apple ID Security Questions - Choice of 3
Sep 26, 2012 11:38 AM (in response to KirstyHenderson)
Hi all! I have found the answer in another forum and this has 100% worked for me!!!
1) Quit App Store in multi-tasking.
•From the Home screen, click the Home button twice.
•Tap and hold on the app.
•When it starts to jiggle, tap the red ⛔ in the top corner to close it;
***Please close all open apps on your phone***
2) Tap Settings.
3) Tap Safari.
4) Tap Clear History.
5) Tap the Clear History button.
6) Tap Clear Cookies and Data.
7) Tap the Clear Cookies and Data button
See the answer in context
I hope this helps a lot of people!! Spread the word (seeing as apple doesn't seem to want to/care!)
Nads

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

I cant use facetime. but my sister can. we share the same account for itunes.but when i go to face itme and click on create a new account a blank screen pops up. what do i do?when i go to make a new facetime account nothing comes up

i cant use facetime. but my sister can. we share the same account for itunes.but when i go to facetime on my ipod touch and click on create a new account a blank screen pops up and the only thing it says is cancel and account. what do i do?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

HT1338 MacBook Pro 13.3: Desktop screen will not come up when turned on. Screen is blank except for an icon of a folder with a question mark on it, in the middle of an otherwise blank screen, laptop making a clicking noise.

My MacBook Pro 13.3 MAC OS X v10.7 laptop will not come up. Blank screen comes up, no color/desktop, etc., only an icon of a folder in the middle of the screen with a question mark on the folder. Laptop making a clicking noise. Suggestions? Thanks!

It's under warranty. Take it in to have Apple fix it.
The "flashing ?" means the machine can't find the start up disk. The clicking noise is a give away that the drive is damaged.

Won't boot up. Comes to a blank screen with a blinking curser in the top left corner?

Hi. I have a hp G62-225NR Notebook running windows 7. I was browsing the internet as usual when the computer suddenly shut off and restarted itself, then not too long after it restarted itself it shut off again accept this time it only came to a blank screen with the blinking curser at the top. I've tried troubleshooting online and I went to the BIO and restored default setup and did the hard drive and memory test which both passed. I can't get to safe mode, or don't know properly how, and when I hit f11 for system recovery it just goes back to the blank screen with the blinking curser. The computer was working just fine, it seems like there must be a fix for this. Any advise here would obviously be hugely appreciated, thanks in advance.

http://support.apple.com/kb/TS2570 Follow this article and when it gets to the part where you go into disk utility using your install disc, you'll actually boot up holding down Command and R

HT1366 My MacBook OS X version 10.6.8 is not going to sleep, keeps loading, then when turned on a blank screen appears, I shut it and the main menu comes up and then it takes awhile for the cursor to operate. Thanks

My MacBook wouldn't go to sleep, it keeps loading, so I have to turn it off. When I turn it on a blank screen comes on, I shut the lid and open it and the main menu screen comes up but the cursor won't work for awhile. Then, eventually, the cursor will work and everything is fine. Hmmm?

Just in case it still didn't work...I copied and pasted the information below...
Battery Information:
Model Information:
Serial Number: D86052301B8DCMDAG
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0301
Hardware Revision: 000a
Cell Revision: 0173
Charge Information:
Charge Remaining (mAh): 3638
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4196
Health Information:
Cycle Count: 631
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 8103
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Standby Delay: 4200
Standby Enabled: 1
Battery Power:
System Sleep Timer (Minutes): 62
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 62
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 1
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x000979a4
Charging: No

Can not access app store on iphone 5, comes up with blank screen?

click on app store on iphone 5 and it comes up with blank screen , after awhile the section heading at the bottom of the screen such as top charts, updates, search , etc, but the main screen body is still blank. Seems to be trying to connect but can't. Any ideas? Much appreciate it.
Thanks!
CC

Do you have a case on the phone? If so, what case? If you do, then try removing the case and see if it works.
If not, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. After that, try again.

HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

When I try to put on my MacBook Pro, the screen remains blank. What comes on is like showers. what do I do?

hen I try to put on my MacBook Pro, the screen remains blank. What comes on is like showers. what do I do?

Do just that. Connect it iTunes and restore it as it appears there is a software issue with the device.
B-rock

I cannot access itunes store- it comes up with a blank screen that merely has itunes store on the page

i cannot access itunes store- it comes up with a blank screen that merely says itunes store

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Frequently, Firefox comes up with a blank screen - not Google!

Sometimes Firefox comes up normally. More often, I get a blank screen without my home page which is Google. I *think* this happens if I already have an internet site open, but it was never a problem before version 5.
When it happens, I have to close Thunderbird, the program I have open, and THEN I can open firefox. Not good.

Opening in the Sidebar is the default action for bookmarks that are created via a "Bookmark this Page" link or button on a website. Make sure you use the many "Bookmark this Page" methods that are in Firefox instead.
Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.

Creative Zen Vision: M, Firmware 1.40.02 and screen backlight not blank

Is there a bug in the .40.02 firmware?
I just bought a Creative Zen Vision: M yesterday.
I noticed that with the out of the box firmware (.30.02), the LCD screen backlight would turn off to conserve battery power.
Later in the day, I upgraded to the .40.02 firmware posted May 24, 2006. Now my LCD screen backlight stays lit all the time.
Since the player is so new, I wonder if I'm imagining things.
Can someone with .30.02 or earlier firmware confirm that their screen backlight turns off after some period of time turning the screen dark?
Can someone reproduce the problem with the .40.02 firmware that the screen backlight stays lit, no matter how long since the last button press?
If I'm not imagining things, this would seem to dramatically affect the playtime on a full charge.
Thanks.

This is INDEED a problem.
The screen is? SUPPOSED to blank all by itself , NOT only with the lock button engaged. I have this exact problem and returned one player only to see the same thing with the next. I also have the .40.02 firmware !!! Creative support said to upgrade my firmware to .6.xx? and see what happens. If the screen doesn't blank by itself without the lock button,? they are sending me another player !

My MACBOOK pro comes on but had a blank screen and the circle keeps spinning- not connecting

My MacBook Pro comes on but nothing displays , just a blank screen with the apple logo and a spinning wheel? How do I get the screen display back?

Start with this trouble shooting guide:
https://discussions.apple.com/docs/DOC-5282
It would be helpful if you provided the EXACT model MBP you have and the OSX.
Ciao.

Blank Screen backlight come on

Similar Messages

Maybe you are looking for