Blank screen but all updated

CCan sum1 help me tried to turn ipad on today n the screan is blank ive updated and restored but still nothing

Once you turn it on and the blank screen appears try resetting it
Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
If the apple logo appears you should be able to get it going..
Mark me as helped or solved

Similar Messages

TS3297 Open iTunes and just get a blank screen. All other apps working.

When I open iTunes Store I just get a blank screen. All other apps working fine.

Hi there,
You mentioned you used the Cleaner Tool to uninstall everything, but still have Adobe App Manager (AAM) installed? Please try running the Cleaner Tool again (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6)
Remove all CC files and be sure to uninstall AAM.
Then download the CC Desktop App here: https://creative.adobe.com/products/download/creative-cloud
After you launch the desktop app, use the Apps panel to install the programs you need.
-Britt

Snow leopard on shut down doesn't completely turn off computer I just get a blank screen but the curser is still live

I have just installed snow leopard on my Mac Pro (v10.5.8) on trying to shut down on the apple menu it doesn't completely turn off computer, I just get a blank screen but the curser is still live and I have to hold down the power button to force a shut down.

Try quitting all applications before shutting down. One may be hanging and preventing a normal shutdown.

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

HT4623 my iPad has a blank screen, but I can hear it working

My iPad has got a blank screen, but I can hear it working. Sometimes, it starts working as normal. Does anyone know if I can fix it? It's an iPad 2

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

HT1430 I have been getting emails but recently I switch on and just find blank screen but the app says I am getting mail this is now happened to me twice any ideas?

I have been getting emails but recently I switch on and just find blank screen but the app says I am getting mail this is now happened to me twice any ideas?

Quit mail like this.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

My ipod touch is showing a blank screen but i can still hear, how can i fix that

My Ipod toush is showing a blank screen but i can still hear, how can I fix that?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen

iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen

As your iPhone is getting connected to iTunes take a backup of your iPhone in iTunes : http://support.apple.com/kb/ht1766
And then Restore your iPhone to Factory settings and see if it works and if that doesn't fix the problem then there might be something wrong with the Hardware and you will have to take your iphone to Nearest Apple Genius Bar.
Restore iPhone : http://support.apple.com/kb/ht1414

Since down loading update I can no longer load lyricsdown load. A blank screen is all I get. thank you

hello
I down loaded the current firefox upgrade and now I am no longer able to open http://www.lyricsdownload.com/ . when I try to open it it just gives me a blank screen.
Thank you for your input

hello
I down loaded the current firefox upgrade and now I am no longer able to open http://www.lyricsdownload.com/ . when I try to open it it just gives me a blank screen.
Thank you for your input

Blank screen after bios update

Hi everybody!
My friend asked me to take a look at her computer. It was quite old HP pavilion 6525en. Before reinstalling windows I checked that she got first version of bios and decided to upgrade it. Sadly, after reboot I found myself in deep problem. There was a blank screen. I decided to look around in internet and found that its a common problem. (have updated lots of bios, but never happened stuff like that). So I found couple articles about Phoenix crisis recovery and decided to try that. Should I know something before I dive in? I know that I need thumb drive or usb floppy and how to enter CRM (crisis recovery mode), but all these sounds scares me a bit. How long does beeping takes after thumb drive stops flashing? Can it overheat, coz I found that fan won't slow down? can anything burn during this? (I know, lots of questions, but I'm cautious, coz I just wanted to do a good job for my friend and now it seems that I might have to get her a new computer ) p/n: GT391EA#ABB. Any help would be appreciated.

There is no harm in trying crisis recovery, the recovery should take 2-5 minutes, you should get some sort of signal or sign when it is done, most systems will automatically restart when done.
I don't know of any reason it would overheat during crisis recovery.

Blank screen after kernel update

Dear Archers, I'm sorry for asking your help but I'm really stuck here.
What happened? I did an update like usual and a new updated kernel was installed. The pacman process 'pacman -Syu' did not completely finish for one reason or another and hang on the part 'linux', so I had to abort it after an hour by using CTRL+C. After this, I was left with an unbootable system saying at TTY1 "Unable to find root device..." and "failed to load ...modules'. Even switching to TTY2 or typing in the terminal was not possible.
Gladly for me I was able to fix this problem by booting the Arch live USB and chroot in my system. From there I ran 'mkinitcpio -p linux', re-installed my GRUB2 (there were some problems with it) and now it's all fine and booting well. The only problem remaining is the fact that the system boots into a blank screen. No error message, nothing.
When trying to consult 'journalctl' there is nothing mentioned about an error or problem. So my initial thought was that there was something wrong with X. But nothing had changed for the Xorg.conf file so I thought that maybe the Nvidia modules where not loaded/configured correctly. Which makes me install 'nvidia-hook' as described in the Wiki and I've added 'nivida' to my 'hooks' in mkinitcpio. After running the command again all went well and the modules are configured. But I still arrive at a blank screen and now I'm really out of ideas what could be the culprit here...
Extra info: I use GDM that boots straight into Gnome. It says after boot:
[OK] ...
[OK] Started GNOME display manager
[OK] Reached target graphical interface
and then a blank screen
Thank you for any guidance or help you could give me.
Last edited by DarkLite1 (2014-06-09 12:24:31)

X still exists, I tried:
systemctl disable gdm
systemctl enable lightdm
After this change I rebooted and the system fires up lightdm after wich I see the lightdm interface graphically and I can enter my username and password. When clicking on OK to logon, I arrive on a black screen with a sad face saying 'Oh no! Something has gone wrong. A problem has occured and the system can't recover. All extensions have been disables as a precaution.' with a 'Log Out' button. On top of this screen my Conky screen pops-up.
When I try to logon with Gnome-Classic, I have the same sad face greeting me after lightdm received my credentials. It's the same as this problem described here https://bbs.archlinux.org/viewtopic.php?pid=1270468
The fact that I can see this as a non terminal thing, means my X is fine. So it might be related to a problem within Gnome or the Gnome session... No one else has this problem? Isn't there a way to re-initialise Gnome or it's session?
I tried already reinstalling Gnome, the Gnome-Bluetooth package a resported in the other thread but to no avail.
Last edited by DarkLite1 (2014-06-09 14:45:50)

No menus, blank screen but plays music and resets ok

I have had my iPod nano 4G for two days. I have reset it about ten times, reinstalled iTunes three times and have reset the Nano using iTunes as well, I've lost count how many times.
The problem is that there are no menus displayed. The screen is lit up in blank white, but nothing else. Strangely enough I can play music and skip back and forth with tracks, by guessing the right buttons to use.
iTunes can see it all right and resets it, synchronises ok and so on. Before I connected it to iTunes, it did display all the menus. Then iTunes wanted to upgrade the software to 1.1.1. Since then ... all blank.
iTunes has also asked me to reinstall iTunes because it could not communicate with the Nano. This was on the second use ever, after I had just downloaded the latest version it from the Apple website. I don't like brand new software telling me it has to be reinstalled, the second time I use it.
Anyway at this stage I have reset the iPod manually many times (no Apple logo - screen comes up white but nothing else), uninstalled and reinstalled iTunes many times, reset the iPod from iTunes (always using the latest updates from Apple), I have deleted the firmware update in the PC folders to force a fresh download ... when I connect now, I get a message "The ipod "D's IPOD" cannot be updated An unkown error has occurred (-124). Unkown error? You don't say. I must have spent about two days on this **** thing, I'm sending it back for a replacement, but I have to wait a while to arrange this.
If anyone has any idea of what to do (excluding solutions involving hammers or bricks) then please do let me know, thanks in advance.
P.S: The PC has a number of other USB appliances (including another non-ipod MP3 player and a Palm pilot) and they all work fine so the hardware on the PC seems fine.

If none of the 5 R's of troubleshooting are able to solve the problem, the issue is hardware related, meaning you'll need to have the iPod serviced or replaced. The LCD screen may have simply burned out or wore out over time.
http://www.apple.com/support/ipod/five_rs/.
It wouldn't also hurt to the let iPod's battery full drain. Then charge the iPod back up and go through the 5 R's again.
B-rock

Blank screen after full update and reboot

As it is now, it goes to the point during boot, right before the resolution gets set to the right value, before I get a blank screen (no input to screen).
I have reinstalled several times, and tried a few different configurations. After all these attempts, I have practically memorized everything. This is what I do:
Setup is finished, and I reboot the computer.
# reboot
The computer reboots and I login to root.
# pacman -Sy
# rm -rf /var/run /var/lock; pacman -S filesystem --force
# pacman -S tzdata
# pacman -S pacman
# pacman-key --init; pacman-key --populate archlinux
I switch to the second terminal (Ctrl + Alt + F2) and create a user
# useradd bompi
# passwd bompi
I write the password. Twice.
# cd /home
# mkdir bompi
# chown bompi bompi
I then log in and out of the different users and echo random stuff until the key is generated. I then switch back to the first console and say yes to everything the key thing asks.
At this point, I can reboot just fine. It isn't until the next bit I get trouble.
# rm /etc/profile.d/locale.sh; pacman -Syu; mkinitcpio -p linux
Everything completes, no problem. I then reboot (shutdown -r now) and run into the earlier described problem.
Anyone have any suggestions?
Last edited by Bompi (2012-06-16 10:43:48)

I didn't know about the adduser script, but wouldn't the chown command fix the permissions? I did it this way in a virtual machine and got it working pretty good.
However, I don't think this has anything to do with the issue I am having. The main reason I made the user when I did, was so I had something to do to while the keys got generated. I never used the user except for a quick login to test.

Blank screen but powers on

i have an older imac bought in i think about 06 i cut the power button on and you can hear it powering up and the light in bottom right hand corner also lights up, but there is a blank screen. No picture at all. What can possibly be wrong. please help.

Very difficult to troubleshoot but almost certainly it's a hardware failure of some type. My guess is one of these three:
Failed HD
Failed Graphics Card
Failed Display
If you have another Mac available you can try connected the two via Firewire Target Mode (Google it) to see if you can see the HDD, if you can then you know it's 2 or 3. My recommendation though is to take it to an Apple Store or AASP to be professionally diagnosed. On a 6 + year old system it's anyone's guess.

Blank screen after bios update succesfully thinkpad w510

Hello everyone, I update my older bios 1.34 to the newest bios 1.45 with the driver in the website lenovo driver, after the succesfully install, the pc restart and now I have a blank screen..
I think the bios failed and now I need to rewrite it... I tried a clear CMOS but nothing appear...
I tried a bootable CD and usb but nothing again...
the pc has already been opened so I think the warranty does not work anymore... I'm really lost...

Un-plug laptop, remove battery, wait a minute or so, then re-insert battery and AC, and turn on. Do you see *anything* on the screen, or does it remain completely blank? When you listen to the machine, does it seem to do anything? How about if you put in a start-up CD, then power on?

Blank screen but all updated

Similar Messages

Maybe you are looking for