Blank Screen; Caps lock Blink Twice Every 2/3 Seconds with orange wireless button.

Hi,
I am using my HP Pavilion DV6 7023tx laptop. It is 1 year 3 months older(warrenty expired). It was working fine but one evening i found it start with black screen and caps lock blink twich every 2/3 seconds and after some times it's getting hot.
I have tried to solve the issue accoroding to the following link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01732674
It looks like BIOS corruption failure. but it will not automatically recovering that mentioned in post.
So what should i do now?
Could you guys tell me what should i do?
Thanks in advance.
Product Information:
===============
HP Pavilion DV6 7023tx
Serial No : 2CE22927FG
Product ID: B3J66PA
This question was solved.
View Solution.

Hello SuperMario1,
Thanks for your response.
The last thing i did, remove CMOS battery and after a few minutes i plugged it.
Then connect AC power adapter and press power button.
Laptop starts but gives a error message
"The CMOS checksum is invalid, The BIOS will be reset to the default configuration and will be rebooted."
Finally laptop start normally. It works fine ...
But same problem when i restart
"blank screen caps lock blink 2 times every 3/4 sec"
So finally
1. remove CMOS battery and after a few minutes i plugged it again
2. connect AC power adapter and press power button
3. laptops starts normally (with a error msg same as previous)
4. Upgrade bios to F.29(previously i had F.24)
5. Everythings works fine (restart/shutdown have no effect)
Nirupam Chandra Modak

Similar Messages

  • Hp pavilion g4 1104dx display white screen and caps lock blink twice

    Hi i recently used my hp laptop screen to test another laptop acer aspire 5517. After the test i reconnected back the cable only to power it on a white screen appeared with caps lock blink twice. I thought the problem might be screen shot so i decided to connect to external monitor but still no signal on external monitor even after pressing fn+f4. What might be the problem thanks.

    Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand you are having an issue with your Notebook. You had stated that you receive a White Screen and the Caps Lock are blinking twice. Please be very careful when it comes to blink patterns as sometimes there can be a pause between the blinking.   Before you start troubleshooting, please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. Here is the first document I found called Performing a Hard Reset or Forced Reset. If that does not work, please follow Computer Does Not Start (Windows 8). The last document I have for you that may help is called Computer does not start and the LEDs blink or the computer beeps. Please follow these provided troubleshooting steps, re-post and let me know how everything went. Thank you! Have a great day!

  • Pavilion dv6 blank screen caps lock light on blinking F11 F12 light on (red)

    pavilion dv6 blank screen caps lock light on blinking F11 F12 light on (red)

    Hello kiranreddy,
    Welcome to the HP Forums.
    It appears that your Notebook is not starting, that you have a blank screen and flashing LED's. I will try to help you with this.
    I would like you to start with this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps. This will help to try to identify if the Notebook is providing an error code. If it is, it will also provide steps to attempt to resolve the issue.
    Please let me know how you make out with this. If you require further assistance with this please provide the Model and Product numbers for your Notebook. (How Do I Find My Model Number or Product Number?)
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Caps lock blinks twice

     I own HP Pavilion dv6 Notebook PC.  I havе the problem when starting my laptop. It works fine when it is on but when i turn i off and than on it won't start normally. When i push the start button, the laptop doesn't start fully. The fan works but the screen stays black. Also the CAPS LOCK blinks twice and the wifi and mute buttons stay orange. 
     I tried pushing windows buttоn+B button + power button, i updated BIOS. And nothing works. It still gives the same problem.
     Could you give me some advice.
    Thank you.

    Hello @M_O_P, 
    Welcome to the HP support forums.  Your blinking feature is unfortunate.  Thank you for providing
    your model number of your notebook.  Could you post back the Product number of your notebook as well.  Use this link to help find this information.
    How Do I Find My Model Number or Product Number?
    In the mean time here is a link you can use to determine what problem you are having by the blink code that is showing.
    Computer does not start and the LEDs blink or the computer beeps  
    Once you post back with your Product number I will be able to look a little deeper into the issue for you.
    Oh and one more thing.  Here is a link for Restoring the BIOS on your HP Notebook.
    Restoring the BIOS
    Hope to hear back from you soon.
    Thanks for posting.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Envy M6 Won't Boot, Caps Lock Blinks Twice

         My wife's laptop automatically installed some HP updates Thursday.  After they installed, the laptop rebooted but only completed the shutdown portion.  During the bootup portion, it never POSTs.  It just sits there, blank screen, fan whirring, wireless radio light on (orange) and the caps lock light blinking twice every 4 or 5 seconds.  I've also noticed that when I have a thumb drive in one of the USB ports, it powers up even when the laptop is off.  And when I turn the laptop on, I see access flashes on thumb drive.
         I've tried disconnected the batteries, laptop and CMOS, with no luck.  I've tried the hard reset procedure (WIN + B and then hold power for a second), with no luck.  When I removed both sticks of RAM, it beeped properly.
         What options are available to me?

    Hi @J1mM ,
    Thank you for visiting the HP Support Forums and Welcome. I have read about your HP ENVY TouchSmart m6-k022dx Sleekbook and getting a blank or black screen on startup after updating. Try performing a hard reset.
    When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    Here is a link to computer won't start for Windows 8.
    If that does not help at the end of the document it shows you to do a hardware test.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP Pavilion DV6 blank screen caps lock flashing continuously

    My laptop was working fine last night, this morning the screen stays blank, caps lock flashes once every 3 seconds or so continuously, the wireless light is solid amber, no other lights are on. I've tried a hard reset to no avail.
    When I power it on it sounds like the fan spins up and it tries to boot, then 2 seconds later it is quiet and nothing happens, if I close the lid without powering off the outside light on the top of the case stays on so it is not shutting down or in sleep mode when the case is closed.
    I've looked at a bunch of troubleshooting and none of the info seems to match this, any help would be appreciated.
    Thanks

    a single CAPS flash is a CPU failure, you can try following the below steps but it will most likely need to go in for repair
    power drain;-
    -remove battery and power cable
    -hold power button for 20 seconds
    BIOS recovery;-
    -hold windows+B
    -turn computer on keeping those keys held down
    if the light is still flashing at this point you'll need to contact HP, if it is in warranty then the repair should be free, if not there will be a cost
    *****I do not work for HP*****
    *****click the purple thumbs up button to say thanks*****
    *****If I solved your problem, help others by clicking accept as solution*****

  • Pavilion dv6-7010us black screen, caps lock blinking indefinitely and orange wifi light

    The laptop is a HP Pavilion dv6-7010us resently installed windows 8.1 pro, 8gb ddr3 (4gbx2), 320gb hdd (not the original hdd)
    i was giving a normal maintenance to the laptop to remove the dust, nothing of the other world, the machine where functioning pretty well 'till this moment, i turn on the laptop and i see the caps lock blinking at 1sec intervals and the wifi light in orange not blinking just led on when i turn on (NOT NUM LOCK LIGHT ON), and this is it, nothing more, i dont know what to do, i use the WINDOWS KEY + B to reset the BIOS and nothing, i leave the power botton hold for a minute without the battery nor the power source, and plug the cable and turn on again without the battery and nothing, also where testing changing the memory from slots i have 2 memories of 4gb and nothing, anybody can tell me any combination of keys to resolve this that i don't use yet?

    What did the normal maintenance include-any disassembly? I assume the laptop is still under warranty?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I can't get a caps lock indicator on my monitor using win8 with a wireless kb on my new p7-1410PC

    How do I get the "caps lock" to appear?

    Hello Yucky1,
    I understand wanting to get the on screen caps lock to display.
    You could either access the ease of access center, and enable toggle keys and that will make your PC beep when the button is pressed. Click on this link and it will show you a video on how to do that.
    You can also check keyboard settings to see if the options Is available.
    How to check keyboard setting steps below:
    1.       Place mouse all the way down in the bottom left corner of screen and then left click, a column with a list of options should appear.
    2.      Click on control panel
    3.       Up in the top right corner type keyboard in the search box.
    4.       Then click keyboard.
    5.        A box will appear with the keyboard settings, check and see if that option is available.
    Please respond at your earliest convenience if this helps out.
    Thanks. 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Bootup Blank Screen - caps lock light and wireless light only keep blinking

    Hi
    My HP compaq 420 was frozen, last night I forgot to shut down then when I press power button no display, fan keeps working and Caps lock light is kept blinking
    I tried to remove battery and pressed power button for 60 sec but no response and I checked my RAM as well it perfectly alright.
    Please help me.
    Theepz

    Hello kiranreddy,
    Welcome to the HP Forums.
    It appears that your Notebook is not starting, that you have a blank screen and flashing LED's. I will try to help you with this.
    I would like you to start with this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps. This will help to try to identify if the Notebook is providing an error code. If it is, it will also provide steps to attempt to resolve the issue.
    Please let me know how you make out with this. If you require further assistance with this please provide the Model and Product numbers for your Notebook. (How Do I Find My Model Number or Product Number?)
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Black screen with caps lock blinking

    I was using my laptop and it was turned on and after some other work I wanted to use my laptop, the screen was black and caps lock was blinkingI turned it off manualy and it was again doing this. Caps Lock blinks 2 times after a pause of 4 seconds continously.
    I tried reset and other things but its not showing anything. 

    Hi Nayj424,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your Compaq Presario CQ62-102TX Notebook and getting a blank or black screen on startup. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Pavilion DV6, Black Screen and 3 Caps Lock Blink

    HI,
    I have an Hp Pavilion DV6 and I am getting the 3 blinks on the caps lock. When I turn on the PC it starts up, the caps lock blinks 3 times and the screen is just black. I have already tested the memory sticks, drain the battery, and hooking it up to an external monitor.  Nothing shows on the other monitor and it just remains black. Please help!

    Hi @shmurray,
    Welcome to the HP Support Forums!
    I understand you are getting a blink pattern on the Caps lock LED, when you turn on the notebook. I am happy to help you with this.
    I am including the page on the error codes for your reference: Blank Screen LED Error Codes
    From that document the pattern you are getting indicates a memory problem. You said that you have tested the memory. What exactly did you try?
    The document suggests reseating the RAM or trying a new set of RAM and then restarting the notebook. If you are still getting a memory problem after trying both of those things, ie a 3 blink code again, then it would likely suggest that there is a problem with the motherboard itself, either with the memory slot or one of the controllers related to memory.
    In that case I would suggest contacting the technical phone support number at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    If however reseating the memory or replacing it leads to a different error code or message please let me know, Although in that case the following may be helpful if you still have a blank screen.
    Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
    Here are some other sources I found that may be helpful to you.
    Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
    I hope that this is helpful to you.
    Regards,
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Caps lock blink 5 times on Compaq 615 laptop, but screen doesn't come on.

    My Compaq 615 laptop screen doesn't come on, instead it blinks capslock 5 times. What shlould I do?
    It has an AMD Athlon X2 processor, with Radeon 3200 graphics.
    I didn't install any new software or hardware recently. All I did was work with the system at night, shut it down, and when I turned it on the following morning, the screen refused to come up, but the caps lock blinks 5 times.

    Sorry to hear that. Please refer to the Blank Screen LED Error Codes document from HP Support. It sounds like a "General system board failure." The explanation says to contact HP for assistance. The motherboard might need to be replaced, and you will probably require the assistance of a technician to fix the problem. 
    Please click the thumbs up button to say "Thanks!"
    Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
    I am an HP employee.

  • Hp Probook 4510s caps lock blinking no screen display

    I rebooted my laptop and all the lights come on but network light ends to turn orange and caps lock blinking.

    Well, my RAM will arrive tomorrow, we'll see if it works or not. Surprisingly, the laptop charges like it should, everything is fine except the 3 blinks. 
    I hope the new RAM will solve the problem.

  • My HP G56 Wont turn on (Caps Lock Blink)

    Heyy guys
    so i turned on my HP G56 Laptop this morning and nothing happens but the caps lock blinking and the wifi and power lights are red. i found online some codes but the caps lock codes when upto six, my laptops caps lock keeps on blinking and doesnt stop. it blinks around every 4 seconds.
    HELP????

    Hi sahibsahib,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some problems with your laptop. That blinking light does indicate a hardware problem. It should be blinking in some sort of pattern and it will repeat. If just keeps blinking every four seconds then it could be just one blink which would indicate a CPU failure. This HP support document on Computer Does Not Start and the LEDs Blink will show you the various blink codes.
    If you have purchased the laptop within the last year you are in warranty and I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America. If you are out of warranty you can still contact HP but there would be a charge or you can take it to a local technician.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • ****PLEASE HELP ME SOMEONE**** PLEASE - Re: ON SCREEN CAPS LOCK INDICATOR

    can someone please help me before i pull all of my hair out.
    i have windows vista - 64 bit - the HP IQ500 touchsmart with a wireless keyboard.
    in the systray the num caps and scroll lock appears as little blue boxes (when on).
    everynow and again they simply disapper.
    i researced how to activate them again but cant remember how to do it.
    there is a way without having to mess with the registry and without downloading any program
    i just cant remember how. i know wherever it is...you ultimately get 3 boxes that you can check in order to turn the options back on.
    i am not talking about toggling, or sound, or mscofig and then boot.
    does anyone know the steps to turn the caps scroll and num lock indicator in teh sys tray back on
    oh, and right clicking on the toolbar and going to the notificiation area is not what i am referring to either.
    I checked in the control panel programs and the hp on screen caps lock indicator etc program is there.
    I reinstalled it nonetheless and confirmed it is installed properly
    When I right click on the notification area I do to properties/notification area/customize
    There are two lists there
    1. Current Items and
    2. Past Items
    For some reason I see caps lock - scroll lock and num lock under the past items
    There you are also able to change the status of the items to either Hide wne active, hide or show
    All three (caps/num/scroll) are SHOW
    I click apply OK then apply
    I restart the computer and nothing. The on screen caps lock indicator is still not in the notification area/systray area
    I repeat teh steps to ensure that the three have the SHOW option chosen and they are.
    So....
    Program is installed
    Items are check for SHOW
    Restart was done
    Ohhh and also...I went to MSCONFIG and made sure that the HP Keyboard Program was selected/check mark as one of the start up programs.
    There in a run command to activiate the 3rd party program (hp onscreen indicator program)
    When you enter the run command that I cant remember...you then get this option where there are three check boxes...one next to num lock - one next to caps lock and one for scroll lock.
    Once you check/select the boxes/options you want...presto they appear in the sys tray/notification area.
    I just cant remember the run command it to save my life.
    Please....put my mind to ease...cause I am losing it!
    I just cant seem to "walk away"...must be my OCD :-(
    Thanks

    NO.
    We are all iPhone users just like you.
    Apple has no blacklist.
    You can contact your carrier and see if they offer such a service.
    You cannot block it at all.
    Sorry

Maybe you are looking for

  • Open link (PDF) in new window from WebHelp custom skin button

    This question relates to my work with FM>RH integration. But the task I'm trying to accomplish is something specifically done in RH with customization of WebHelp skins, so I'm posting in this forum. I'm running RH9 on Windows XP Pro. We have recently

  • How do I install Lion to a blank HDD?

    I put a new hard drive into my Macbook Pro after the last one crapped out on me. Do I just get a Lion disk and boot to it?

  • Better today's date formatted in supported API?

    Since "Use of NSCalendarDate strongly discouraged." prior to deprecation what is your preferred alternative to: // NSCalendarDate *now; // now = [NSCalendarDate calendarDate]; // [textField setObjectValue:now]; The following is obviously better from

  • How to add powershell script code in form application in C#

    Hi, i am creating a form application in C# and have powershell code which will create remote session on remote machine and execute few commands like set execution policy copy some share files install that files etc. I have to add this powershell scri

  • Installing Student Version

    I called Adobe and was told I qualified for a student version. Is there something special I will need to do when installing the software?